Whirlpool should give this man a royalty. Like many others, a big factor for selecting this was that someone made a good full video. Luckily I was replacing a unit so this matched up in size. I was able to reuse the holes from the original bracket and just had to drill new holes for the top cabinet to the microwave. I didnt even look at the instructions and just followed this video. thanks

@BorsellinoHomeServices

Жыл бұрын

That's awesome! Maybe I should reach out to whirlpool and offer to be there installation video guy!

I'm going to be installing 13 of these tomorrow, and i think you just saved me a lot of time. I did NOT think i was going to find a video with the exact model and orientation! thanks

@BorsellinoHomeServices

3 жыл бұрын

Wow that is awesome to hear!!! I hope it helps!!!

Thank you so much for explaining the measurements. My cabinet had sort of protruding edges front & back and measurements weren't going as easily as expected. You helped a lot and saved me from going nuts. Thanks again.

@BorsellinoHomeServices

3 жыл бұрын

Awesome! I'm glad my video helped!!!

This is the best video on how to install a Whirlpool Over-the-Range microwave with roof-venting. His explanations and instructions are easy to follow. The picture quality is excellent and one can clearly see everything he does, including unpacking, collecting the tools needed, making the markings, finding the stud, using the template, etc. There is no guesswork here. Using these instructions I could install my Whirlpool WMH53521HZ microwave. Although, my model is different, the instructions and techniques shown in this video did the job for me. A big thanks and Thumps-up for Borsellino!

@BorsellinoHomeServices

2 жыл бұрын

Thank you! I'm glad it was helpful, thanks for letting me know!

Love that shirt. I am a veteran of maybe six microwaves installations over the years. All were outside venting. You did a great job. Well explained.

@BorsellinoHomeServices

4 жыл бұрын

Haha yeah a friend of mine got it for me at the fair one year.

Thanks for doing this video. I had installed mine 8 years ago but it slipped my mind how it was secured with the 2 bolts. Appreciate the effort in putting the video together!

@BorsellinoHomeServices

2 жыл бұрын

glad it was helpful!!!

Thank you so much for this start to finish video. Don't think I could have installed it without this video. Superb job to you (and your assistant). Being 77 years old with a questionable back, I did move the stove out of the way. Made it easier to lift into place. Thanks again.

Thanks for the comment on what drill bits to use, I am installing one tomorrow

@BorsellinoHomeServices

3 жыл бұрын

Glad to help! You got this!!

Thank you so much. Precise & concise procedural explanations, including tips not written on the manufacturer’s specifications, like extra tools needed to install the microwave.

Thanks very much; watching your video gave me the confidence to install my Whirlpool over the range micro. Your clear and simplified how to video was just what I needed.

@BorsellinoHomeServices

Жыл бұрын

That's awesome! Glad it was helpful!

Did this installation yesterday of nearly the identical model -- your video is awesome and helped tremendously. Thank you!

@BorsellinoHomeServices

Жыл бұрын

That is exactly why I made this video! I'm so glad it was helpful!!!

Great tutorial! I am getting ready to install two of these Whirlpool microwaves. This was & will be extremely helpful to me. Thanks!

@BorsellinoHomeServices

2 жыл бұрын

Awesome thanks for letting me know and hope it goes smoothly for you!

Installing the same one next weekend. Thanks for the video!

@BorsellinoHomeServices

3 жыл бұрын

hope it goes in smooth!

This video is great! My husband and I feel confident now that we can do this ourselves!

@BorsellinoHomeServices

3 жыл бұрын

You can do it!

@SoulSpartan80

3 жыл бұрын

And we did this very evening! Thanks for all your help!!

05/23/2022 Awesome video!! Good info from start to finish! Your Good sense of humor reminds me of myself when working on projects, got to be positive. I observed your able assistant almost suffered a skull fracture as you performed your job briefing. And you gave her the heavy end to lift!! I will be replacing a Hotpoint unit that we installed 17 years ago. I have slept since then and since I am 74 years old and my assistant is 72 we will proceed at a slower pace. Of course there is more to the story but it is WAY past my bedtime. Another day. Stay Safe, Healthy and God Bless! Patty

@BorsellinoHomeServices

2 жыл бұрын

haha thanks for the comment. Yeah that's my girlfriend Tricia. Not sure why she puts up with me lol

Dude, thank you so much for making this video. You saved me so much time installing one of these!

@BorsellinoHomeServices

Жыл бұрын

You're welcome! Glad it helped!

Great Job!

Outstanding job. Thank you!

@BorsellinoHomeServices

3 жыл бұрын

Thanks for the feedback!!!

I don’t have the wall template so I NEEDED this video. You are appreciated 👏🏽

@BorsellinoHomeServices

4 жыл бұрын

You’re welcome 😊

Saved my ass by posting this video. The template was NOT on paper like other identical models. I can’t believe they would have you cut it out of a cardboard box. Almost made too much Swiss cheese out of my cabinet to mount the upper bolts

@BorsellinoHomeServices

Жыл бұрын

oh man! I'm glad this was helpful and saved the day!

Thank you for this informative video.

@BorsellinoHomeServices

3 жыл бұрын

You're very welcome! I make these to try and help as many people as I can!

THANK YOU - Followed you every step of the way

@BorsellinoHomeServices

2 жыл бұрын

no, thank YOU! ;-)

Excellent video! very detailed and informative. I like the FF's.

@BorsellinoHomeServices

3 жыл бұрын

Thanks! Glad it was helpful. What is FF's???

Very helpful Video, thank you so much, you made the install a lot easier

@BorsellinoHomeServices

3 жыл бұрын

I'm glad it helped!!!

Excellent video! Getting ready to install Whirlpool microwave now. Your video is a big help.

@BorsellinoHomeServices

10 ай бұрын

awesome hope it went well

Thank you so much, we just installed it in our home

@BorsellinoHomeServices

2 жыл бұрын

Sweet! I like mine it's had no issues since I installed it!

many thanks for taking the time to make this video.

Gave me the confidence I needed to install it myself saved me $140 👌🏽

@BorsellinoHomeServices

Жыл бұрын

YESSSSS!!!! That's awesome to hear! I love helping people DIY!!!

Thank you very much , great way to teach

Great step by step. Thank you!

@BorsellinoHomeServices

Жыл бұрын

Glad it was helpful!

Very helpful. Thank you!

@BorsellinoHomeServices

2 жыл бұрын

You're welcome! Glad it helped!

Thank you sir! This was very helpful!

@BorsellinoHomeServices

3 жыл бұрын

Glad it helped!

Thanks for doing this. I just installed one of these for my mom. The directions suck! You saved me a ton of time!

@BorsellinoHomeServices

3 жыл бұрын

Awesome thanks for letting me know!!!

excellent video! thank for taking the time to help so many people. You are an excellent instructor. Again TY so much.

@BorsellinoHomeServices

8 ай бұрын

thank you!

Thanks for this video!!!! we followed your video and it was spot on. My wife and I did not go to divorce court...lol.....thanks!!!

BEST instructions ever. I HATE reading those manuals. Thanks man!

@BorsellinoHomeServices

2 жыл бұрын

you're totally welcome!!!

Great instruction, this is helpful.

Thanks man. Installing this tomorrow.

@BorsellinoHomeServices

2 жыл бұрын

awesome! hope it went smoooooooth!

Thank you for this video! MY wall template was missing and I was freaking out lol

@BorsellinoHomeServices

4 жыл бұрын

Awesome! Thanks for the feedback!

Nice job on the installation and the video. Will install the same appliance at my daughter's house tomorrow and having watched your installation it should go much smoother. Thanks again.

@BorsellinoHomeServices

Жыл бұрын

hope it went super smooth!

@randystekly6518

Жыл бұрын

Too smooth and that made me nervous. Thanks again.

Thanks! You a are a good instructor

@BorsellinoHomeServices

3 жыл бұрын

You're welcome! Hope it helped!

thank you!!! I was about to cut into the back trim by the wall

@BorsellinoHomeServices

3 жыл бұрын

You're very welcome!!!!!

good job, big help

@BorsellinoHomeServices

3 жыл бұрын

happy to help!

Thanks & appreciate your tutorial video.

@BorsellinoHomeServices

Жыл бұрын

You're very welcome!!!

BHS - this video was awesome! Had purchased this unit direct from Whirlpool with installation (decided to cut myself a break). My installation has a roof vent and was a replacement of an older Whirlpool unit. Installers were total morons - damaged my top cabinet, damaged the microwave, tried to convince me that this unit wouldn't top vent, and then tried to leave the unit here for me to deal with. Explained to them (convincingly) that they were not going to leave my property unless the damaged unit was on their truck. I bought another one from Menards - display model, no box. I spent 45 minutes on the phone with Whirlpool and another 90 minutes on a live chat with them trying to get the measurements for the vent cutout, mounting holes and placement of the support rail. Got nowhere - was ready to start hassling Whirlpool HQ, when I found your video - you saved the day!! For the benefit of your followers - here are the measurements: 1. Mounting rail (goes on back wall - centered, 17-5/16" from the bottom of the mounting rail to the BOTTOM of the cabinet (this is also the top of the microwave unit - if the top goes up against bracing below the top cabinet bottom, you'll measure to the bottom of the bracing. The measurement is 15-5/8" if you're measuring from the bottom of the cabinet to the TOP of the mounting rail. 2. Vent cutout - 12-1/2" x 4-3/4" - centered (6-1/4" on either side of the center line) and 1" from the back wall. 3. Power cord hole (1-1/2" hole) - 6-3/8" to right of center line and 6-1/2" from back wall. 4. Holes in top cabinet (for mounting screws) - Hole D - 12-1/2" to left of centerline & 10" from back wall Hole E - 7-1/2" to right of centerline & 10" from back wall I had to improvise for the venting. Had existing 10 x 3.25 square duct that extended below the bottom of the cabinet. Had to cut it off (in the cabinet above the microwave and then modified a starter collar I got at Lowes (www.lowes.com/pd/IMPERIAL-3-25-in-x-10-in-Galvanized-Steel-Rectangular-Stack-Duct-Starting-Collar/1000230291?cm_mmc=shp-_-c-_-prd-_-plb-_-ggl-_-LIA_PLB_171_Air-Circulation-_-1000230291-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAiAmuKbBhA2EiwAxQnt72B8NoZoUBup2IzjeVKfgCnacyQhommk9hBHsbhWidkjrYNuF7g2wxoCEQQQAvD_BwE&gclsrc=aw.ds) so I could slide it up into the existing ductwork and then down over the new damper assembly on the microwave. My modifications were: 1. Straighten out the bent lip and tabs (so they were back to the 10 x 3.25 square shape - so they'd slide up the ducting) 2. Drill out the rivets and remove the pieces on the other end of it (so it would slide nicely over the damper assembly) 3. Trim away the end (#2) so that it cleared the hinge/pivot of the damper flapper and wouldn't interfere with ti opening & closing. Once in place, I duct taped it to minimize air leaks. Again, you saved the day for me!

@BorsellinoHomeServices

Жыл бұрын

This is exactly why i make these videos!!! Thanks for letting me know and I'm stoked that this was helpful to you!!!!!!!!!

My GE microwave from 2005 finally crapped out. At first kzread.infoUgkxO_Bc204MGjxDl87cOKcdgaRhzSqGmv_g I was unsure because I was looking for something with the exact same features. Found it with this one. Interior space cavity was large, but the outside was smaller than my old one. I love the one-button push for 1-6 minutes, and the 30 second add or 30 second start. and MOST IMPORTANTLY, I love how you can adjust the power level during cooking. The reviews said it could not be done, but this marked all the other boxes. and happy to say, it does. I can hit 1 minute start, and change the power level from 10 to 5, 30 seconds in, without interruption. my favorite feature!

Good job.

@BorsellinoHomeServices

3 жыл бұрын

Thanks!!!

Thanks for the video 👏🏼

@BorsellinoHomeServices

2 жыл бұрын

you betcha!

Thanks this was helpfull

@BorsellinoHomeServices

2 жыл бұрын

Glad it helped!!!

Thank you so much for your help 😊

@BorsellinoHomeServices

Жыл бұрын

You're very welcome!!!

Very through video. and very good that you gave the measurements also as I do not have the templates. Thanks a lot!

@BorsellinoHomeServices

Жыл бұрын

awesome!glad it was helpful!

U really helped us , thank u

@BorsellinoHomeServices

3 жыл бұрын

You're very welcome!!!

MANY THANKS FOR THE VID BROTHA , I GOT ONE OF THESE TO INSTALL TOMORROW , THIS WAS VERY HELPFUL THANK YOU

@BorsellinoHomeServices

10 ай бұрын

Glad it helped!

@jpeterman9796

10 ай бұрын

@@BorsellinoHomeServices HELPED IT DID . CAN I ASK WHAT YOU WOULD CHARGE FOR SUCH A THING

Bro you are the best!! thanks so much, very informative just Installed the exact microwave in color black. Have a great Day.. to thumbs up!!

@BorsellinoHomeServices

2 жыл бұрын

Thank you! 👍👍

@mattieice2988

2 жыл бұрын

@@BorsellinoHomeServices you betcha 😁

muchas gracias amigo!!!

@BorsellinoHomeServices

2 жыл бұрын

you're welcome!

This the best and most thorough one in making things clear. My package is missing some items

@BorsellinoHomeServices

Жыл бұрын

Thanks for the positive feedback! Hopefully you are able to get the missing pieces!

Dude, you may have just saved me over $110 installation fees. Thanks so much!

@BorsellinoHomeServices

2 жыл бұрын

woohoo! You can do it!!!

Thank youuuuu!!!$$$

Thanks.

@BorsellinoHomeServices

Жыл бұрын

You're welcome

Great video! It will help me to know what to expect when I go to do mine, same make and model. Thank you sir! [liked.saved.subscribed] Replacing a GE where the magnitron died just a month after the warranty ran out. No more GE appliances for me. But the setup looks to be about the same so we will see how it goes. Thanks again for your contribution!!!

@BorsellinoHomeServices

Жыл бұрын

awesome! hopefully it all worked out and fit good!

Nice tutorial young man. This will help many young folks and give them the confidence needed to tackle the job themselves!

@BorsellinoHomeServices

Жыл бұрын

Thank you :)

Thanks! I'm almost there with mine, but was not sure if it mattered if the vent adapter opened to the back or front!

@BorsellinoHomeServices

3 жыл бұрын

Totally does!! Depends where you're venting outside...

Thank you for the measurement info on where the bracket goes. We bought a used one and didn’t have the template!

@BorsellinoHomeServices

3 жыл бұрын

AWESOME! Glad it helped!!

Hey thanks! This will help me install one today. I'd rather watch someone do it than read instructions. You did a very thorough job. If I had made a video it would been all jacked up with cussing and screwups lol.

@BorsellinoHomeServices

2 жыл бұрын

yeah that's the magic of editing... you don't see my screwups unless I have bloopers at the end LMAO! 😂

Man those instructions are confusing as HELL, glad there's videos out there to break it down.

@BorsellinoHomeServices

10 ай бұрын

happy to help!

Hmm would you like to make a $100.. lmao! Thanks for making the video. I was considering this microwave and found this!

@BorsellinoHomeServices

2 жыл бұрын

well it's a great microwave! It's been installed for a while and no issues yet

I used a manual hacksaw and a drywall saw for the cutout, what a pain on that fiberboard the cabinet was made out of. I'll have to buy an oscillating tool sometime.

@BorsellinoHomeServices

Жыл бұрын

you can get them pretty cheap as a kit that comes with blades. Back when they first came out the tool anone was like $400 but now a whole kit is closer to $100. Harbor freight even sells a super cheap version with no attachments for $19.99! The blades can be pricey though and the cheap blades just don't work well or last long

I bought the same Whirlpool microwave before. It was the same model I bought to replace it so all We had to do was remove the old microwave and install the new one in it's place. Simple swap out.

@BorsellinoHomeServices

3 жыл бұрын

Well that's convenient! 😆

@paulmcwilliams1709

3 жыл бұрын

@@BorsellinoHomeServices Well I'm all for convenience. lol

Great video. Installed this very model and it looks amazing. Very easy step by step instructions.

@BorsellinoHomeServices

3 жыл бұрын

Thanks! Glad to hear it was helpful!

You said it best, lots of words but what does it all mean. The video was huge. :)

@BorsellinoHomeServices

2 жыл бұрын

i do use a lot of words lol. but i'm glad it was helpful

Great video. Gave me some good insight. I bought a 6yo house with a Whirlpool microwave (wmh2175xvs) already installed. It appears the blowers are pointing the correct upward direction for outside ventilation because my outside wall vent louvers open when the vent is on. On the top of the microwave, just in front and under the cabinet to which it is attached, there are series of holes which I assume are used as the outgoing vent for when the microwave is configured to blow forward (recirculating). When I run the vent, there is a suction along these holes. Looking inside these holes, I see a dirty metal filter (not the filter under the microwave where air is drawn from the stove). 2 questions: Should I somehow remove this internal filter and clean it? It is not obvious just how to remove this filter without uninstalling the microwave. If these holes are used for the recirculating vent configuration (which I am not configured for), can I simply tape over these holes to force more suction on the underside of the microwave? Thanks in advance.

@BorsellinoHomeServices

2 жыл бұрын

Honestly I don't know much about how they are build beyond this installation video. I'd say give it a shot! You can always take the tape off! And you'll find out pretty quickly if you start pulling it apart if there is a filter or not inside. Doesn't make sense to me that they would put a hidden filter though

Good job! Im on the fence on weather to do me or pay the man. Lol

@BorsellinoHomeServices

Жыл бұрын

it's pretty easy to do if you have the tools and are mechanically inclined! It comes with directions and everything. Only tricky part is if your cabinets are weird and if the vent isn't lined up right

Should have watched your video before drilling the screws in the studs before the toggle screws lol. Great video man!

@BorsellinoHomeServices

Жыл бұрын

oh man!

Putting in the same microwave but in black. Had to replace my original Whirlpool. Unfortunately, the bracket wasn't the same, so had to measure thrice to drill once. I do hate my stud finder though

@BorsellinoHomeServices

3 жыл бұрын

yeah I hate my studfinder too. I want to get a Walabot DIY have you seen them? They look amazing

@spenzalii

3 жыл бұрын

@@BorsellinoHomeServices looks like an interesting product, but reviews seem split on it. Finished the installation this morning. Needed longer toggle bolts for the mounting bracket. I was slightly off on the cabinet holes, but got them in the microwave. If I used a slightly bigger bit for that hole it probably wouldn't have been a problem

@BorsellinoHomeServices

3 жыл бұрын

Yeah now that you say that we did have to fight it in a little bit... We've been using it for a year now and it still works just fine

Good Vid,,,,,,,,,,, Got mom a new whirlpool figured Id take a look, see if there was anything I didnt know, nothin to it, why not slide the stove out ? Bit easier access, stove slides easy. just a thought,,,,,,,👍

@BorsellinoHomeServices

Жыл бұрын

i was just lazy lol

Great video! One question. The bottom of my upper cabinet has a frame around it. Does the WALL cardboard template (mine came with a paper template), butt up to the bottom of the frame or does the template need to be trimmed so it fits inside the frame? Just to be clear, I'm speaking of the wall template, not the upper cabinet template.

@BorsellinoHomeServices

2 жыл бұрын

I would butt it to the frame not the plywood because that is where the microwave will sit, it doesn't fit up inside that frame

Thanks it was very helpful. It would seem to me that the brackets holding up microwaves are fairly standard now. I am replacing my microwave rather than installing it anew. Do you think the brackets could be interchangeable with the replacement microwave? I think it's worth a try versus redrilling holes, etc. My old microwave is a Maytag CMV1100AAW.

@BorsellinoHomeServices

3 жыл бұрын

You could try but I doubt it will be exactly the same. Although Maytag is owned by Whirlpool so hey, you never know! worth a shot!!!

@fitiam1972

3 жыл бұрын

So Joe was it interchangeable?

Great Job does the exhaust vent come with microwave and how would you extend it if to short? are the exhaust vents standard ? can I get or do I have to order from whirlpool ? Thanks Again new subscriber!

I put the wall bracket up it was too high so I lowered it had the microwave on it then I tightened the bolts in the cabinet until there's no space showing now the bracket isn't in the microwave holes but the microwave is tight and isn't moving should I take the microwave down and move the bracket up a little then put the microwave back up and tighten it back or should I loosen the bolts up some

@BorsellinoHomeServices

2 жыл бұрын

honestly I'm having trouble understand what it is exactly that you are asking. But my only suggestion would be to put the bracket at the exact distance down from the cabinet that the instructions say, and it should work

So you rotate blower motor up for roof venting installation only. I don't have roof venting, so I'm assuming I'd have to do the wall venting installation. But wouldn't that just blow onto the wall? I don't have wall venting either on my wall. The microwaveI'm replacing had a vent in the front on top of the door. So I'm now second guessing if i bought the correct microwave for my setup.

@BorsellinoHomeServices

6 ай бұрын

i believe there are 3 options, top vent, back vent, and self recirculating vent. for the wall vent it's for microwaves that are on an exterior wall and you install the vent straight out the wall behind it

Ooohh, We live in an old house as well, moved to current location in 1960. built in 1920-30's?? Patty

@BorsellinoHomeServices

2 жыл бұрын

cool. thanks for the comment. hi patty!

How well does it work for venting, and how loud is it? Thx

@BorsellinoHomeServices

3 жыл бұрын

it seems to work pretty good. i don't use it very often but when i do it definitely works. the HI setting is not terribly loud, but loud enough that I don't run it longer than I need to. I usually run it on LOW though and it's not bad and sometimes I forget to turn it off while I'm eating then I'm cleaning up dinner and realize the fan is still on

Do you need to install the vent part? I just bought a new home and it has this microwave. It turns on and everything it just doesn't heat up? Any help is useful thanks.

@BorsellinoHomeServices

3 ай бұрын

That's weird. I don't think the vent has any correlation with heating things in the microwave but I'm just a carpenter guy, not en electrical/mechanical engineer. Sounds broken to me

I bought the model wmh31017hz07 and it says manufactured April 2021. The vent system looks different and that attached piece has nowhere to attach. I guess they changed the newer ones, yet I still have to vent flap thingy part but there's nothing to attach it to. Plus, the dang mounting screws don't won't screw in more than a couple threads. I don't know what gives.

@BorsellinoHomeServices

2 жыл бұрын

ugh i hate it when they change stuff and it doesnt work!!!

You are a life saver. The installation instructions that came with the unit were useless! Question, does it matter which way the one way vent door opens ( front to back as opposed to back to front?). I have the same wall vent setup as you with it opening up to the ceiling.

@BorsellinoHomeServices

Жыл бұрын

THIS! This is exactly why I make these videos! I'm so happy that this was helpful for you!

@BorsellinoHomeServices

Жыл бұрын

As for the vent, I have no idea. Just make sure the airflow is going in the direction of your vent. You probably have it installed already though this comment was 6 days ago

Does it matter if the damper assembly is installed reverse from the way you install it, with the damper opening in the opposite direction?

@BorsellinoHomeServices

3 жыл бұрын

I don't think I understand what you're asking. Is it able to be installed rotated 180 degrees? As long as all the screws go into holes and the air moves in the right direction then it is installed right. If the vent is installed improperly you most likely won't have airflow, thus defeating the purpose of the vent. But again, I'm not fully sure what you're asking.

@michaelmorris6362

3 жыл бұрын

@@BorsellinoHomeServices Thanks. That answered my question.

Does this model have a recirculation mode for venting? We do not have any external vent to hook up. thanks

@BorsellinoHomeServices

4 жыл бұрын

yes it does! in fact it comes in recirculating mode and in the video i show how to switch it to vented mode

@aggie_candy

3 жыл бұрын

@@BorsellinoHomeServices I watched the whole video. I dont believe you mentioned how to change it to circulation mode. Do you mind sharing how?:)

@dandifonzo

3 жыл бұрын

@@aggie_candy Per his comment, it comes in recirculation mode, so you don't have to do anything. It's ready right out of the box.

👍🏾👍🏾

@BorsellinoHomeServices

Жыл бұрын

👍👍

At 24:09 you install the vent (that is a bit short); I am stuck here as the microwave did not come with the vent. Where did you get it? and what exactly is it called?

@BorsellinoHomeServices

Жыл бұрын

hey, seeing this 2 months late sorry! Hopefully you figured it out. I don't know exactly what it is called, just rectangular ductwork I think is what you're referencing. I just measured the dimensions of it and went to home depot or somewhere like that and bought the closest thing and cut it to fit

Can this unit be hard wired in? Just took out the old unit... there is no plug, just a wire coming out of the wall which was connected to the oven and then black taped into a bundle.

@BorsellinoHomeServices

Жыл бұрын

why not just install an outlet if you have wires there? Just need to shut the power off and install an old work box with an outlet

Do I need to cut the box out? I don't have an external vent. I'm trying to replace a different microwave that has the plug and screw holes.

@BorsellinoHomeServices

Жыл бұрын

cut the box out??

@njdevilku1340

Жыл бұрын

@@BorsellinoHomeServices The big area in the back that you cut from the cabinet for the vent.

Ours has never vented stove smoke even on the high fan setting. Does yours vent the air? Wondering if it is a a faulty install or bad vent design...

@BorsellinoHomeServices

3 жыл бұрын

This model you have to flip the motor around before installing with top vent, so that might be installed wrong. The vent could be blocked somehow or they ran the vent too long of a distance or not to the right specs. Maybe a bird's nest clogging the end or something. Or the flap on the outside might be stuck shut. If you hear the motor running it might sounds like it's working but maybe the actual fan got blocked or something? I dunno there's a few possible things that could be wrong with it. Of course it could also just not work well...

@matthews8691

3 жыл бұрын

​@@BorsellinoHomeServices Motor was flipped up in the right direction. Reinstalled yesterday after putting some duct tape covering some small holes on the back of the microwave (to maybe increase suction)... not much improvement. Its a new building and from day one it was like this. Why would long ducting after the microwave matter if it works properly? The fan should push it out the top of the microwave at the same speed, no matter the length of ducting afterwards I would think...? The suction is also pitiful when not installed on wall (tested during reinstall). I think it is just crappy design --> crappy suction. 🙁

@BorsellinoHomeServices

3 жыл бұрын

@@matthews8691 that sucks that it isn't working right. I don't know if long duct matters or not it was just a thought. Or maybe the duct takes too many turns. That can reduce airflow I would think... Is it the same model that I installed in the video? If it is new maybe just try to return it

@matthews8691

3 жыл бұрын

@@BorsellinoHomeServices exact same as in video. Just past 1 year warranty unfortunately... should have dealt with the issue when we moved in a year ago. oops

Hi there ! Does the fan automatically come in while using the microwave ? I can’t find if there is a way to shut off the fav when just warming up something

@BorsellinoHomeServices

3 жыл бұрын

uhhhhhhh i never really payed much attention to that but there must be some exhaust built in if that's what you're talking about. But not like the main loud blower fan right??

@Tperrien22

3 жыл бұрын

Yes it’s the super loud fan that you turn on while cooking. For some reason when the microwave is on the fan automatically goes on. I was wondering if everyone’s does this or if my husband installed something wrong it a setting I can change .

@BorsellinoHomeServices

3 жыл бұрын

@@Tperrien22 I just tested mine and the fan does come on! I turned on the actual fan and it does match the sound of the low setting, not the high setting though.My guess is there's no way to turn it off. If it's coming on with the high setting for you there might be something wrong with the wiring, but it should be the lower of the two settings for the microwave part.

@Tperrien22

3 жыл бұрын

Bummer !!! I hate that fan sound just for the microwave ! Thanks for checking

@BorsellinoHomeServices

3 жыл бұрын

@@Tperrien22 you're welcome

Trying to install this on a concrete wall. Any tips?

@BorsellinoHomeServices

Жыл бұрын

I installed cabinets on a brick wall once and bought these big mollys meant for concrete and drilled holes and attached a wood board to the wall so I could attach the cabinets to that.

What happens if I never took off the temp covers @21:16 ?

@BorsellinoHomeServices

10 ай бұрын

if your microwave sticks out past the cabinet like mine does you can take them off after. but they shouldn't be blocked i believe that's for airflow venting

I don't have the silver metal piece so the front of my cupboard the one above the microwave is a bit greasy; how can I fix this problem?

@BorsellinoHomeServices

3 жыл бұрын

Clean it?? I'm not really sure what you're asking, this seems more of a cooking and cleaning issue than an installation issue, no??

@GyaluelJr

3 жыл бұрын

@@BorsellinoHomeServices ok so the fan from the microwave blows to the front, see in your video you unscrew the nuts and changed the fan direction to blow upward instead of blow forward? That's what am refusing to.

@BorsellinoHomeServices

3 жыл бұрын

@@GyaluelJr refusing to do it?! Or there's no vent above so self venting is your only option?? Have you checked to make sure the grease filter is in place? I never understand self venting, it just dumps all the heat, humidity, smoke, grease right into the room instead of outside... I wish I had a solution for you, I really do!

@jeffellis6544

5 ай бұрын

@@BorsellinoHomeServices- this is what we’ve had in our kitchen for the past 20 years. It’s the system that was set up by the previous owners with just a hood above the stove and no vent in the wall. I think the idea was that at least some of the grease from your cooking smoke on the stovetop gets trapped by the metal filter before it was circulates into the kitchen. And then you wash that periodically. it doesn’t work very well. When we took our cabinets down to redo the kitchen, you would not believe the greasy dust on top of them. We are about to install a new whirlpool microwave hood vented to the outside and I’m very excited about that. Appreciate your video.!

Not just longer screws . You should use a box extension jam .

@BorsellinoHomeServices

3 жыл бұрын

yes I should use that you are correct...

Hint: it’s much easier to do this when you take :30 seconds and slide your range out of the way.🤷🏻‍♂️

@BorsellinoHomeServices

2 жыл бұрын

yeah i don't like messing with gas lines unless I absolutely have to

Just curious about the paper that had the dimensions for the holes for the two screws and plug to go through on the bottom of the overhead cabinet. Aren't the holes positioned correctly on the paper so that you could put the paper up and just mark where the holes are instead of having to measure them? I am about to install a Whirlpool microwave that came with a similar drawing printed on the cardboard that cuts out. I was hoping to use that but since seeing your video I thought I would ask.

@BorsellinoHomeServices

2 жыл бұрын

sorry for the delayed response. Yes if you have a carboard cutout, in theory it should work. I just trust measurements over paper