Another great video. Seems like some new tools have made an appearance as well. I enjoy the down to earth explanations and no nonsense style. Keep it up!

@efd

3 жыл бұрын

Ha, upgraded the drill. The old craftsman drill was starting to get a bit sluggish.

@rsierra2554

2 жыл бұрын

Thanks so much.

@kennytowell6412

Жыл бұрын

@@rsierra2554 n

Thank you very much!!!!!💕💕💕💕💕💕💕 I was able to install mine!!!!

Did you nail the spacer blocks in place before mounting the microwave which I was hoping to see?

We looked all over for B, called the help line and # is no longer working. Thank goodness for your video!! 😊

@efd

Жыл бұрын

Glad it helped!!

@hansontelevi2711

2 ай бұрын

currently trying to install now. has been eons, still cannot locate hole B. Hole B....where? why? how?

Thanks for posting this video. Based on the 2 templates you used, the it seemed that the microwave was expected to be vented out the back or out the top. You obviously didn't cut out the vents so I'm wondering- how you are venting out the microwave?

@efd

2 жыл бұрын

It’s recirculating, vents out the front top.

Hi, i really need your help. So my contractor installed this same model few days ago. But while we're using it is not pulling smoke from whenever I'm cooking. Although the exhaust thing outside the wall, it's working when we turn this unit on. I tried testing it with a piece of toilet paper and plastic too but it really doesn't pull anything, all i here is just noise as if it's working. Thanks in advance! Please help me

@efd

2 жыл бұрын

If the outside to blowing air out then it’s sucking the are from somewhere. Try taking off one of the screens under the microwave and see if you can feel the air being sucked in there

@craftman5632

2 жыл бұрын

You would need to tape up the top vent that on top of your microwave just above the door. You'll get up a little bit more suction on those bottom filters.

You have a gas stove and no outside venting ?

@efd

5 ай бұрын

yes, you don't need to vent to the outside anymore, stove's these days are more efficient and don't put off the same amount of gasses. its not a code requirement.

Why did you skip showing getting the microwave oven into position? All of a sudden, magically, it was in place!

@efd

Жыл бұрын

I’m a one man show, if I remember correctly, my camera glitched up.

@jessejames586

Жыл бұрын

Yeah, that would have been nice. Also, did you nail the spacer blocks in place?

@schumachercad8183

Жыл бұрын

@@jessejames586 I didn't nail them in place, I set them on the microwave when I was almost tilted all the way up.

When you removed the screws to remove the bracket from the microwave, you should have replaced the screws as they hold the unit together. Just sayin'.....

@efd

2 жыл бұрын

Valid point, knock on wood, it hasn’t fallen yet. 😀