Over the Range Microwave Oven Install - GE Profile PVM9005SJSS
Тәжірибелік нұсқаулар және стиль
How to replace an over the range microwave oven. If you have to replace an old microwave oven that's installed above the stove, the job can be intimidating... But it doesn't have to be hard! As long as you have a helper and the right tools, its pretty straightforward.
In this video we show you step-by-step how to remove an over the range microwave oven, how to install a replacement microwave (in our case the GE PVM9005SJSS) and give some pointers along the way.
==Product Link==
GE Profile Microwave: geni.us/jgP0V
==Tools Used In This Project==
DeWalt 20V Impact Driver: geni.us/tJU26k
DeWalt Impact Bit Set: geni.us/QBnon
Diamond Hole Saw (tile): geni.us/WJCA6
Wood Hole Saw (electrical cord): geni.us/r1V8B
Zircon Stud Finder: geni.us/aMIilIs
As an affiliate, I earn from qualifying purchases.
🛠 Curious about all the tools and gear we use? 🛠
Full list here: kit.co/tophomeowner
♪♫*•♪ Like the Graphics and Music? ♪♫*•♪
Download Unlimited Creatives for All Your Projects:
Envato Elements: geni.us/AZYHh6
✍ Visit our blog @ www.tophomeowner.com
📷 Follow us on Instagram: / tophomeowner
👍 Join us of Facebook: / tophomeowner
🐦 Tweet us on Twitter: / tophomeowner
Пікірлер: 96
Realistic - not so perfect, smooth, and music covered. Honestly we worked at it harder than this but this didn't set us up to think it happened by magic! Really appreciate this video.
@TopHomeowner
2 жыл бұрын
Glad it helped you. Thanks for the comment!
I really like it When Husband and wife working together Peacefully...👍👍
Just bought this model and will be installing this weekend. Thanks for the video! So detailed and quick how to
@TopHomeowner
2 жыл бұрын
Thanks! Glad it helped.
I just purchased the same model!! Thank you for posting. The video was very helpful!!
Going to attempt this weekend! Thanks for the video!
you guys worked together real well.
@TopHomeowner
Жыл бұрын
Thank you, 18 years of marriage and many home projects we have learned how to argue off camera 😜 No really we try to read each other and while we do have arguments we also know we have to get over ourselves and work together.
this video helped me.. i was super stuck as the new micro i was installing was 1/8" taller and the backsplash went up too high!! reusing the old hanger (had to grind the tabs slightly) mounted slightly lower, but on TOP of the backsplash tile was my ticket to victory. thanks again.
@TopHomeowner
Жыл бұрын
Glad it helped!
Circle thingy 😂. Thanks for the videos.
Nice video! My husband and I are much old and much weaker than you two and we didn't have the strength to lift this baby up above our shoulder. We ended up using a car scissor jack to hold it in place instead of using our own mussel. We used the jack both in uninstall old one and install the new one (the same as yours), no sweat.
good job. just purchased the same package but w/ gas range and swapped out the fridge for one w/ the water dispenser inside instead of in front
Can you come do mine, because my husband and I don’t work well together with projects😂
@Honestandtruth
Жыл бұрын
Sounds like me and my wife too 😌😌 that is not right
Great video!
I'm not sure whether to commend you guys for working together as a team without arguing, or being able to keep the kids out of the kitchen the whole time while you all were working.
Thank you. I was able to get it down all by myself!
@TopHomeowner
9 ай бұрын
Excellent!
Very nice instructional. Looks great!
@TopHomeowner
2 жыл бұрын
Thank you!
We owned ours for 2 years and the most common breakdown on this microwave is the cable that connects the door to microwave (top left) will be pinched when the door open and closes. There's a video on KZread that explains how to fix it but he does not show you how to.
Great video and easy to follow
@TopHomeowner
2 жыл бұрын
Glad it was helpful!
Thanks for sharing this. Was looking for a little more info/voice over regarding how you secured the microwave in the bracket.
@TopHomeowner
3 жыл бұрын
There are tabs on the metal bracket that match up with slots on the back of the microwave. You just need to set the back of the microwave slightly higher than the tabs (about a half-inch) then lower it down. It sounds more complicated than it is! The bracket is typically attached to the microwave for shipping, so it's easy to see how it lines up when you remove it from the back of the microwave. Hope this helps!
Thank you for posting this! I really enjoyed the video and found it helpful. If I could make one suggestion it would be how to rotate the motor for re-circulation and so forth. Thanks!!!
@TopHomeowner
3 жыл бұрын
Thanks, great suggestion!
Very helpful. Thanks!
@TopHomeowner
3 жыл бұрын
Glad it was helpful!
nice video sr my micro just die today now i have this chalenge to replace it now i know thanks so much for your video twoo tumbs up
No swearing, impressive😊
Nice video and nice family.
@TopHomeowner
Жыл бұрын
Thank you, may be a little biased but I think they are nice too 😉
Does the interior have a light? Or, does it light up when in use?
Good luck! If it works like my GE Profile, it will be shorting out in a few years.
Top right and left tile spacers could've been removed and replaced with wood, easier than drilling through tile. And for me to much gap between bottom of cabinet and top of MW. Now don't get upset just my opinion. Good job👍
@TopHomeowner
3 жыл бұрын
Thanks for the feedback, and for watching!
I installed this model last night, put potatoes in for 10+ minutes now it won't work anymore. I wonder what went wrong
Where does the exhaust air go
Great video! I love the look, and been thinking about getting this microwave. It's been 3 months.... how are you's feeling about it? What do you think of the longer door, compared to your traditional one? Would you recommend it, or stick with the traditional design?
@TopHomeowner
3 жыл бұрын
Thank you, We are actually in the process of putting together a review video! The dishwasher review comes out this Friday and the Microwave will be in 2 weeks...That being said we really like it. It is a slick design and I don't see a big difference in this vs the traditional. Maybe if you lived in a tight kitchen it could cause problems but that would be a big maybe. It is really easy to clean with fewer crevasses, which is a big deal to me with 3 kids :)
@TopHomeowner
3 жыл бұрын
Here is a link to that review video we promised...kzread.info/dash/bejne/ipyDlLBtp7TYd9I.html
Can you vent fan to an outside duct? Do you drill a separate hole for that? Does the template show you where to do that?
@TopHomeowner
9 ай бұрын
Yes you can. I don't remember if there is a separate template for that but I can't imagine they wouldn't include it.
What can make cold air come out the sides of the microwave? Would it be the guy didn't properly line up or hook up the vent that goes up into the attic? It's so cold now that it is winter and my kitchen isn't warm. I even had more insulation put in and it is still cold around it and inside when I open the door.
@TopHomeowner
2 жыл бұрын
There should be a flap to stop air coming back into the house either inline or at the end. If not, you should be able to install something like this: www.amazon.com/Draft-Blocker-Backdraft-Preventer-Deflector/dp/B0822VQMHM
@divinetiming8422
2 жыл бұрын
@@TopHomeowner Thank you! I'm sorry, I just now got a notification to your response. It shows you responded a month ago. Thank you for the tip! I appreciate it!
Mine is not a over the range model. It made a few loud noise and looked like a lightning bolt struck inside of it. So far it looks like a paper thing caught a couple burn marks on it?
@TopHomeowner
2 жыл бұрын
Sorry to hear.
Can you make a video on service this and also my microwave keep blowing the power outlet after having it for 3 years, I have already replaced outlet twice any idea what that might be ?
@TopHomeowner
Жыл бұрын
My best guess is that there's an issue inside the microwave (like a short) thats causing your problem
@esored1989
7 ай бұрын
I have this exact model and had the same issue, ended up just buying the same model to replace it with
I just finished my install on the same MW and I am not sure how the blower fan covers should be located ? I can see the squirrel cage looking from the top down is this correct or not. Also do both the top and back cover have to be covering the squirrel cage fans??
@TopHomeowner
3 жыл бұрын
I took a couple of pictures when I installed mine and had to change the blower fan to recirculate. First link is cover off and the second link is cover on. I hope this helps! drive.google.com/file/d/1jB-ONejjZG42lNqgDu5z4szr5wj9kTFf/view?usp=sharing drive.google.com/file/d/14ylov1NLbhaIe0Dp4zJRiijtk_qwmFsq/view?usp=sharing
@jasonastacio4187
3 жыл бұрын
@@TopHomeowner does this MW need to vented out or do you have it venting into the cabinet space?
@TopHomeowner
3 жыл бұрын
@@jasonastacio4187 You can either vent it to the outside or blow it out of the top underneath the cabinet doors. You just have to rotate the blower fan before you install it. It doesn't vent into the cabinet space at all. Hope this helps!
I didn't see you connect the vent fan to any exhaust pipe. Where does the air flow?
@TopHomeowner
2 жыл бұрын
In my case I don't have an outside vent. You have multiple options when installing it though and it can be used with or without a vent by changing the fan position before you mount it.
Are there 36in filler kits available for this microwave? If so can you provide a link. Thanks great video!
@TopHomeowner
3 жыл бұрын
I checked with GE and unfortunately they don't offer a filler kit for this microwave. Thanks for watching!
@favicorral6272
3 жыл бұрын
@@TopHomeowner Thx for the info! I found a place that makes custom fitting kits. Just ordered both the microwave and trim kit. I’ll let ya know how it fits. Cheers!
Just installed and the microwave is tilted up..about 1 inch difference between top and bottom. Was it installed wrong?? Do I need those spacers on top?
@TopHomeowner
2 жыл бұрын
Based on what you described I'd say that's very possible. Without the spacers, the microwave could pull up into the bottom cavity of the cabinet.
@daddylogan
2 жыл бұрын
If you had a wall like the guy who made the video, then yes. Why? Because his lower part of the mounting bracket sat on the backsplash which pushes it out from the drywall. So he put spacers up in the upper left hand corner and upper right hand corner to match the thickness of the tile so the mounting bracket would be flush all around. It also probably means he had to adjust the upper template hole drilling forward by the same thickness as the spacers. He can chime in on that if he wants. Otherwise it will look like your microwave is leaning back in at the top and pushed out at the bottom.
Your boys are adorable!
@TopHomeowner
2 жыл бұрын
Thank you!
Did you have to reposition the blower motor to make it recirculating?
@TopHomeowner
3 жыл бұрын
Yes, there were a couple of screws I had to remove in order to rotate the motor. It was a pretty simple process, but it was a little tight. I tried to capture it on video but the recording didn't turn out. I hope this helps!
@Diggletsdad
3 жыл бұрын
@@TopHomeowner just installed mine. That is my only complaint so far. Almost every other microwave comes from the factory set for recirculating, not this one
@tim3064
3 жыл бұрын
I would like to know the answer to this question too
@tim3064
3 жыл бұрын
can you tell us if the blower cover have to be facing forward or leave them the way the factory set them up??
@Diggletsdad
3 жыл бұрын
@@tim3064 you have to turn the blower forward to make it recirculating
What’s the name of the leveler app on your phone?
@TopHomeowner
3 жыл бұрын
It's actually a mode of the Measure app that comes with iPhone. If you have an Android phone, I've used the Level app in the Google Play Store that works pretty well too.
@NateR227
3 жыл бұрын
@@TopHomeowner Great Thank you, I have an Iphone.
Here is my experience so far with this MW. We purchased it about 6 month ago as were installing the wall duct for rear venting in a new kitchen wall. We live in a cold climate so opted to vent horizontally to prevent heat loss and the dreaded vent condensation pooling in the microwave and destroying it in 6 months routine that you read about all over the net. To anyone wanting a well-insulated rear duct with a snug airtight connection to the MW, you will have to put some serious thought into it as appliance manufacturers would rather spend development $ on fairly useless but glitzy features like blue tooth connectivity rather than designing a system that allows for precise ducting. This is not unique to GE or this unit in my experience. Anyway, I removed the mounting bracket from the unit 6 months ago to locate my ducting. While the instructions do not say to replace the two screws holding it there for shipping, the look like permanent screws and match the other permanent screws holding the side and top housing in place, so I replaced them. It would be nice if the instructions clearly said to discard these screws because it took some troubleshooting to realize that the unit cannot be installed on the bracket with the screws in place. I probably would have caught this if I had been installing the same day I removed the bracket from the unit, so this problem is probably pretty rare. But the most aggravating thing was that the paper template's location for the toggle bolt holes was a half inch off of their actual location on the bracket. It turns out that a 1/2" is right in the sweet spot to make drilling a second set of 5/8 holes in your sheetrock extra-aggravating as the holes overlap.
@TopHomeowner
Жыл бұрын
Thanks for sharing your experience. Thankfully ours is still going strong but we don't have it vented outside either.
How do you replace the charcoal filter?
Nice editing out all the yelling😂😂😂😂
How come you didn’t vent it?
@TopHomeowner
2 жыл бұрын
The old one wasn't vented and I didn't want to cut a hole in the house.
I just bought this at Best Buy outlet as open box, unfortunately it doesn’t comes with the mounting hardware, so you know where I can get those?
How you get the smoke 💨 out of your house
@TopHomeowner
2 жыл бұрын
There are filters in the microwave that help and can be replaced. It's should work the same as the old model you're replacing.
@ismaelsantos8969
2 жыл бұрын
Ho ok thanks so much
I can do this by myself
? No ventilation?
@GenXautrucity
8 ай бұрын
Never mind. They have self venting options as well.
Diamond hole saw wasn't necessary.....
Are you still a fan of this microwave?
@TopHomeowner
8 ай бұрын
Yes, it's working great for us still!
Just getting ready to go camping
This model was made from lemons. I don't recommend anyone buying this GE model.
Do you not own a level....... What kinda nonesense these people doing these days...