This is perfect! I'm doing this exact same project with studs and electrical in the way. Why don't home builders just do this from the beginning? Because they're lazy. We cook a lot and venting back into the kitchen makes absolutely no sense. The metal screens under microwaves are not filters. Period. Thanks guys, great work.

@MageLeaderInc

Жыл бұрын

I just can't get over the fact that this is a $500-$1000 job now days

So great that you uploaded a video of the worst case scenario! Really helpful for those of us who are in the real world, dealing with the same situations.

@timtuckercom

2 ай бұрын

This looks easy. Currently trying to figure out how to add a vent on a brick wall.

Started watching you years ago and what I liked about your work is that you tackle everything. Not just the new stuff from the ground, bt the stuff we all come across at one point. Very good teacher!

@piratemikestreasure

Жыл бұрын

Thank you for your kind words and support. 🏴‍☠️Mike🙂

It's funny that I keep running into / finding your videos throughout the last few years of different projects that I've tackled but wanted some perspective and visual on how to do it before I try. Your videos have always served me well. I'll be installing an over the range microwave / hood combo in a week or two and this helped a lot! Thanks for what you do. :)

These are the videos that I enjoy watching because they help you solve a difficult problem like the stud in the way. Thank you. Learned a lot.

Excellent tutorial. It was incredible my GE did not have anything to describe how the exterior rear was to be installed. Thanks Shannon, it saved me from making my usual screwups.

I'll be doing this task shortly, so it's perfect timing for this video to come out. Looking forward to seeing what tips and methods you use.

We bought a new home and builder did not want to install rear exhaust. Thank you so much for posting this. It’s perfect and you are very much appreciated. I will begin this project next week and send you details.

Very helpful video.Thank you for being so thorough. Our 10 years micro recently stop working. Because of your video we were able replace our broken microwave. Thank you!

Great video, I’m “thinking” about doing this project as we need some venting from our microwave. This is the exact set up we have and the video was perfect going step by step. I love the fact that there were some obstacles during install that most people don’t expect but almost always have like the plug wiring and stud in the way. Also, the tips such as giving some room for error while cutting the sheet metal of the vent were great because you don’t think of that, after you cut it’s too late. All in all, best video I’ve seen on this type of project.

Hey. I just wanted to thank you for your content. Your video was my exact situation and your video walked me through the repair and helped me complete my repair with ease. Great work..

Thank you so much. Professional installer forgot to vent the microwave to the overhead hood. He installed it without a carbon filter with the exhaust going into the kitchen. Thanks to your video I was able to correct it. Merry Christmas! God bless you.

Shannon I dig how you get right to the point and without a beer in your hand like other video's I've seen....right on man!

I just have to say that you did a great job on this video. Clear instructions, with thoughtful comments. Good quality audio and video. Very helpful. I subscribed and hope your others are of the same quality. Thanks!

Awesome videos, both this one and the previous (vent inside)... Gave me all the information I need to vent back, into the wall, up the wall, the back through the wall, to a 3 inch line that runs above the cabinets, hidden by crown. No need to go through the upper cabinetry... awesome... thanks.

Nice video Shannon. You really took the time to explain it all. For those watching, sometimes with Condo's or Row homes you have a party wall behind the microwave that goes into someone else's home and in that case you have to vent up into the cabinet and then 90 and run through all of the cabinets on the wall until you get to the exterior wall on the right of left of the microwave or hood. Lots of great tips and the next time I install one of these again I will be using the foam expansion product that you used. Great idea. Thanks, Bob

@HouseImprovements

2 жыл бұрын

Yes depending on your stoves placement and your home you may not be able to go straight out the back like this . That is why that fan blower can be turned for different direction of exhausting. Basically you can go out any exterior wall or roof depending on your home .

Thank you so much Shannon being so exclusive and for addressing my personal issue. The use of sealant tape to bridge any tiny gap is what I need, that and the foil tape. I am hoping I can also use the foil tape to stop drywall from blowing off where it was cut. I had called the microwave company and searched the net for days to solve the problem. No one had a suggestion to assist the small back flow of air into the house through the tiny space on the sides of the microwave. No one until you! So thank you very much for creating this video :)

@caseycomely1231

2 жыл бұрын

there should never be any gaps it should be continuous overlapping metal in case of a fire and not too many elbows to collect grease !

one of the best project videos i've seen in years! excellent job!!

Thank you! This is exactly what I needed. I have to run mine on top of my cabinet out the side wall, but this helped so much. It looks really nice.

Really helpful taking the time to show how to deal with the stud right in the middle of the vent. Thanks!

Great video for DYI's. Thanks for sharing this knowledge to us. Keep the great work that you are doing.

Definitely deserves a like and subscribe. Great instructions! Wish my contractors would have done this in the first place, but I appreciate you guys making the video!

I've watched how to install laminate at least 3 times, I learned so much from you. keep up the good work.

I subscribed a while ago bc you have the best DIY videos than anybody else out there. More simple details and include info that is very helpful. Thanks!

@HouseImprovements

2 жыл бұрын

I appreciate that!

This video was incredibly helpful! I’m thinking about doing the same and will likely run into a framing issue. Thorough and detailed! Thank you!

Help i was looking for. Your video made my job lot easier. Thank you sharing the valuable knowledge and experience with us.

Thanks for showing the detail! Really gave me confidence to vent my microwave since I have a stud right in the middle!

This video was super helpful in figuring out how to install our microwave exhaust to outside. Thank you for a clear presentation. Luckily, we didn't have to deal with a stud or electric wire, but all of the other guidance was purr-fact!

Great video! So glad I found your channel. I was able to get my sewer pipe done from one of your videos to the best of my abilities. Venting my range hood is next. I know watching your videos, you’re doing it the right way. I will certainly have a lot more hiccups along the way of course lol. Thanks for these videos!

Nice thorough, detailed video - makes a project like this do-able. Also, thanks for the extra tips on sealing everything up!

Great job Shannon, you take great care in your work. Great job! 👍👍

@HouseImprovements

2 жыл бұрын

Thank you so much!

Much respect regarding the eye and ear protection! Great video!

Exactly what I needed for my project. Thank you!

I had the exact situation with the stud dead centre of the vent outlet. What i did was run two 3x4" ducts out, either side of the stud, as the outlet is divided in two on the unit. I put a regular 3.5 x 10" vent damper terminal on the exterior wall though. Thanks for another great vid.

Thank you for another fine video. This is on my "To-Do List".

I like that you showed the worst case scenario. All of these other home improvement channels are like "if you run into this complicated obstacle, just do this - easy as pie and I'm not going to show you anything on that." haha.

@MageLeaderInc

Жыл бұрын

Worst case would have been having to go up through the attic and out the roof or gable end

It's a small detail, but I really appreciate you dropping the volume of the video while hammering or using the impact driver. Thanks!

Thank you for teaching right way to seal inteior side of the vent. Replaced old microwave amd found nasty stuff from last guy skipping steps! Cheers!

Excellent video. This is the exact same isse I have with the stud directly in the center. Thanks!

Great tutorial, I have the same issue with my microwave, now I know what to do. Thanks Shannon.

Awesome video! Very nicely done.

This is by far the best video for this that I’ve seen but the hardest to find I’ve been looking for videos for days on this Love the blocking idea I’ll be doing that for sure I just wish there was a better “coupler” to “couple” the microwave/range hood to the wall vent

Nice job. I have to do the exact same process as I have framing in the way. Thanks so much for the clear instructions.

Just what I needed to do the job. Thank you very much!!!!

Thoroughly enjoy your videos.

Clever on pre-drilling the holes for the wire before hand. I would have been cussing at myself. Thanks as always.

best install I've seen yet 🥇

These projects always require some improvising and I think you’ve done an excellent job of that. Solid video all around 🤙🏻

@HouseImprovements

10 ай бұрын

Glad you liked it!

What an excellent bunch of workers

Excellent, I like your workmanship.

Helpful information, thank you for sharing !!

Quality job as usual!

Thank you for sharing! Us DIY hacks appreciate the work you do!

This is exactly what I needed… thank you !!!

Best channel for real DIYers

That is exactly the project I'm doing. Thank you very much for all the information.

@HouseImprovements

2 жыл бұрын

Wonderful!

Nice work and very detailed It helps a lot Thx

Excellent demonstration video

Excellent information, thanks!

25:46...yep. I need to start wearing glasses too, down here in Grand Rapids MI.

I know how it is remembering at the last minute about EYE PROTECTION! Finally a fella who is demonstrating the correct procedure to perform something on you tube, hurray!!

Really great job. That is what my husband going to do. Thank you very much for sharing.

This is some quality content right here.

Nicely done!

Great install!

Having the vent blow into the house is a pain. Grease gets on everything. 20 year old house with a gas stove, contractor buddy didn't know how I was able to buy house in CO, said it was a code violation; Carbon monoxide. Ran into the same stud problem. However one of the studs was behind finished cabinetry and I did not want to take it down, damage the paint job, and moulding work. so I used a flat mending plate with a 3" pipe adapter and a 4" dryer hose fitted to the exterior of the mending plate. Yes, I am forcing the flow into a narrower path. I'll check it in two years, set it in my calendar, to see if there is any excess grease build up on the motor or plate. But I am happy to get it done after living here for 11 years!

I can't believe I watched this whole video. Wished you were in New Jersey. I need help with replacing the exterior microwave outside vent and new microwave. I will order the microwave and parts for delivery. Hoping to find a good handyman to help me. Thank you for this great tutorial.

I am just about to the point of wiring electrical boxes and was worried about how I was going to get my microwave vent in, and this got me exactly what I needed, I had a stud right in the way, and it was totally worth it to me to cut out that stud and frame around the space. Next step is to cut the sheathing and steel siding I have there. Excellent thought putting the foam strip in there for a better seal. I'll be doing that, although at the same time I thought about getting some sprayfoam between the studs and the duct. I guess I'll just have to see if I can even get in there.

Great video!! I was stuck with how to attach the vent to the microwave. The appliance store said "oh it just goes up against the vent. there might be some play but thats how it works". Made no sense to me. Directions made no mention of the bracket. Put microwave in. Finished watching this video. And realizing the bracket sitting on my kitchen island was the same one you added. Took the microwave back out. Added it. Everything works great.

Nice job. Very educational.

Thank You !! Very educational.

Very infomative...thank u for sharing...

Thanks. Exactly what I needed to know

Excellent videos, real world problems and how to solve them

thanks man... i'm from mexico and we usually build with masonry... but i got the gist of it pretty well

Thanks help me out a lot today!

awesome, thanks for sharing

Perfect video! I've got to do the exact same mod with a stud in the middle that supports the ridge rafter of my roof. Will probably double the framing bottom and top but I was thinking I probably needed to go to the floor with a cripple stud - not going to do that now. What you did should be sufficient with my increased framing. So glad to have found your video!

@HouseImprovements

Жыл бұрын

If its indeed supporting the ridge beam then I would do a header across the opening supported by cripples to the bottom plate

@decosse01

6 ай бұрын

@@HouseImprovements Well intended - The cut Stud is effectively the Cripple Stud - what is required additionally are Jack Studs - I think your intention was same, just nit-picking on the terminology (although you just repeated what the requestor had used). 😁

very helpful. thank you

This is a great video!

Thank you, really learned a lot.

Thank you Lot’s of help

Good video guys.

Good video, I have to do all this today, thanks

Had almost the same deal, and wasn't willing to give up the cabinet space. Went straight up and on top, added some crown moulding and some fake plants to hide it.

Great video - you can install my microwave & vent anytime. Quality work.

Very nice; thanks so much!!!

Righteous install bro

Liked your way of explaining how to do stuff…..👌

great job and video. Thanks

Thanks, getting ready to install new REAL venthood and I also have a stud in the middle.

Excellent video. 👍👍

It's nice to see someone advocate for safety equipment

great video, thanks Sir.

"Eyeballs don't grow on trees, folks!" Now that would be a terrifying sight! :) love your videos

Thank you, sir!

Thank you for this video. I am doing this today. Wish me luck

Great job

that was awesome perfect 👍

Very nice video😊