All My Favorite Tools Used On This Video - www.amazon.com/shop/everydayhomerepairs

@bamm2pointohh

Жыл бұрын

Good job bro i see a lot of people leaving negative comments this is a great idea and awsome method..

@juliantichy7016

Жыл бұрын

​@@bamm2pointohh qqq

@marcuspeters5855

Жыл бұрын

I ... KNOW this already. Good vid though

@seapeoplesdidnothingwrong1307

10 ай бұрын

I like to check the other side of the wall before cutting. Make sure there is no power or anything else.

@brandonnguyen1748

9 ай бұрын

Where do you get that stud finder? Thanks

Industrial electrician here - this tutorial was brilliant. It’s so annoying when someone shows how to run wire and they have a big ol basement under it to run it through - ya obviously that’s easy if you got that but most people don’t. The trim trick and even pre-installing the connector was very clever and as someone who does work on his own house I really appreciate it - thanks and bravo! 👏🏻

@Noslime

Жыл бұрын

Industrial electricians are just that, industrial electricians. Most get lost in a house just as I would get lost doing 600 V plus in their facility. Please don’t encourage this guy. He’s a hack in my opinion and go eventually get sued out of existence

@Noslime

Жыл бұрын

And he also uses connectors for me should be twisted his wires together and at least using a wire nut and if not a crimp sleeve…. If you are a licensed electrical contractor as I am, then you should know better

@rharris22222

Жыл бұрын

Agreed. I figured he would run the holes below the trim, but actually seeing the technique was good. But "Good to great" was the pre-install trick for the romex connector. Wow! Many thanks!

@j.morrison73

Жыл бұрын

@@Noslime Not to discount your experience but those connectors he used are more than acceptable, with my own 50 plus years of diy work I would use them only on solid wire even if they are permitted on braided wire. Your opinion amounts to 'old school die hard mentality', akin to old school plumbers not having nice opinions of using PEX over copper. Myself included of/in my own 33 year techno career, many 'old school' techs are very resistant to change. But it doesn't mean it won't work. In fact in many cases, works better.

@miamih01

Жыл бұрын

There's no difference in backstabbing and using wago's.

I’m an electrician with 48 years experience and was still impressed. Good job.

As an experienced craftsman and past electrician I watched your video expecting a train wreck/ hack job. Boy was I surprised. You did an excellent job! I will be adding you to my list of people to recommend. Great work!

You are literally a life saver! I’m going through tough times as a teenage girl and my parents are going through a divorce, and my mom has not the first clue on how to do anything with basic home repair. I thought I would just learn all of this myself! Thank you!

@EverydayHomeRepairs

4 ай бұрын

Good on you for taking on a challenging situation and leaning into learning some new skills. I hope things calm down on the home but a curious mind is a powerful thing 🙌

@SitarHero28

4 ай бұрын

Stay strong. You got this. Good for you for recognizing the struggle of being a single parent.

@LeatherWingedAngel

4 ай бұрын

@@EverydayHomeRepairs thanks so much for the kind words! I appreciate it ❤️

@LeatherWingedAngel

4 ай бұрын

@@SitarHero28 thank you so much, I needed to hear that ❤️

@Bird-wz7nx

3 ай бұрын

Hey, I've been there, and a couple things: Measure EVERYTHING three times! You're inexperienced, and there's a ton of dumb things with DIY, like how the measurement of lumber isn't actually what its called, and a lot of entry level tools are not 100% accurate. (my first square came wonky lol) Also, if at all possible, get decent wallpaint if you (or your mom) are picky about how it finishes. A decent paint is going to be so much more forgiving if you need to go back and patch than the cheapest stuff. (but don't sweat it too much if you're not the kind of person who has to have impeccable drywall surfaces lol) Also, be nice to yourself. You're going above and beyond. This isn't your responsibility.

handy tip .... NEVER ASSUME both outlets on a box are connected together ... test BOTH sockets on an outlet to ensure power is off ... the resulting shock when one finds out someone wired 2 different circuits into one socket is enough to make you never make that assumption ever again

@civildiscourse2000

Жыл бұрын

Fair caution. I always check both. Sometimes one outlet will be switched, especially in a living room. Sometimes the duplex is worn or faulty. If the outlets are truly split (e.g. on a 3-wire circuit) then they should be fed by a two-pole breaker and both be disconnected when it's off... but there are lots of things that _should_ be and aren't. I agree, check both outlets.

@frontiervirtcharter

Жыл бұрын

Check with a non-contact tester, worst case there could be a loose wire in the box with voltage on it.

@ayporos

Жыл бұрын

@@frontiervirtcharter Fuck even that. I've got zapped a few times doing electrical work when I just started doing DIY stuff so now I don't trust ANYTHING and I shut off EVERYTHING when doing electrical.

@patrickharding8851

Жыл бұрын

@@ayporos yep... new place I am in, has crappy labeling in the box, and some stuff in the same room is on different breakers... just easier at this point to shut it all down, until I can map and label it all...

@frontiervirtcharter

Жыл бұрын

@@patrickharding8851 The non-contact tester is part of the map-and-label process.. See what squeals before the breaker is off, and check again after.. Can be a literal life-saver

This is, without a doubt, one of the best videos I've watched on home work/remodeling. Well explained without all the added unnecessary blather. Thank you.

@rickyoung6653

Жыл бұрын

@James Mamone Be quiet and keep your negativity to yourself. Most people have enjoyed this brilliant video so if you don't like it then move on.

@mgaribaldi6553

8 ай бұрын

😂 he was complimenting the video

Excellent! I've done work like this in my home for the past 30+ years, and your videos are a must have for people like me. Thank you for your invaluable info for the home handy-man...Like me!

As a licensed plumber, I felt compelled to watch this to the end, because us trades need to know EVERYTHING about all the other trades right! I'm glad I did because wow, you explained all this very clearly, and the good tips were coming fast and furious! I'll use this some of this knowledge somewhere I'm sure, maybe in my own trade. Thanks!

Once in a while we bump into a video so informative we cannot but think every video should be made in the same way. This video is simply packed with tricks and useful info. Awesome!

@EverydayHomeRepairs

Жыл бұрын

Thanks man 👍

@oaklandsdriveresidents7590

Жыл бұрын

@@EverydayHomeRepairs But where's the earth wire sleeving? Obviously different regs in the US

@Iceburgh4458

Жыл бұрын

​@@oaklandsdriveresidents7590

@larryfontana9207

Жыл бұрын

DITTO!

@metaphyzxx

Жыл бұрын

Truer words never spoken.

33 year electrician here. Great video! I also never considered removing base board to do that type of install. What a great idea and so much easier to fix than drilling out holes in the drywall!

@coolhluke8089

Жыл бұрын

Yup that's how I used to do it

@keithb6717

Жыл бұрын

33 years and you never used a 6’ flexible bit? Are you really an electrician? I don’t think so.

@alonsoaragon6916

Жыл бұрын

GREAT JOB,NO MESS!

@keithn4304

Жыл бұрын

This is all totally reliant on having 4" baseboard.

@keithb6717

Жыл бұрын

@@keithn4304 Who cares about baseboards? Why even touch them, go direct. Duh

That's a nice technique, I have used it several times over the years. Nicely demonstrated. I have a pro tip for you. When you use an old work box for a new outlet, many times the cover plate doesn't meet flush with the wall - there can be a small gap between the cover plate and the wall. When this happens, you can avoid this gap by breaking off the tabs (ears with loops) on the top and bottom of the outlet. These outlet ears are scored so that they are easy to break off - the outlet is designed for this. You can see the top ears clearly at 9:26 in the video. When you break those tabs off, the remaining top part of outlet will then set closer to the wall, in between the blue tabs on the top and bottom of the electrical box, which hold the box to the wall on the edge of the hole in the drywall. This allows the outlet to be seated closer to the wall and the plate will also seat closer to the wall, eliminating the gap.

@SonofStormblessed

Жыл бұрын

Or... you could just get a metal old work box, seeing how they can be adjusted to sit back further in the wall. It's what I personally do. Of course I also DONT do residential work, so plastic isn't really an option for me.

@toopoorformensa

Жыл бұрын

Thanks for the tip, didn't bother to even see if I could fix that problem!

This was awesome! I just finished a project where I had to pull trim work off and I do a lot of electrical work, but I had never combined the two. Thank you so much!

This was amazing. I have no basement or attic and have been trying to figure out how to do exactly this. Thank you so much for sharing your techniques.

Well done!! Pretty straight forward for most homeowners to DIY! Your channel is an absolute pleasure to watch as you convey all the information clearly and concisely. No filler words nor any gab just to fill up air time!!! Your production is on par with a professional broadcast and you should be commended for putting out such a polished product!!!

@mikek.8017

Жыл бұрын

@Karl with a K Steel boxes do. Not the plastic ones, though.

@terrycartwright3653

Жыл бұрын

I always thought the wire had to be a certain height off the floor for codes?

Really nice job, and great video. I'm a 67 yo electrical engineer and do my own home improvements including finishing my basement. That's a clever trick to take the wiring down to the baseboard. Nice job describing the potential gotcha's like stud holes where your trim nails will go, clipping the old trim nails instead of yanking, and strain relief/protection on the cable going into the metal box.

This is probably the best do-it-yourself video I have seen on KZread yet. And not just that but all of the comments I have read have provided as much information as the video. And no flame wars. Great!

I have done some electrical projects of my own. I have never run across a need to use this kind of setup. But, seeing this is so clear to me of how easy it is. Thank you.

Thank you for vacuuming the open bays out before you started the work. It's what I do. I see so many SLOBS just leave everything. I had to go behind one of my corner kitchen cabinets to run a wire and found coffee cups, rags, actual garbage. I felt like contacting the contractor who did that work... to come pick up their garbage. Being clean is a quick and easy way to NEVER leave a tool behind.

@choimdachoim9491

Жыл бұрын

I opened up an old bathroom wall during renovation and discovered that they had stored all the drywall scraps inside which had become covered with mold from a bathtub leak. After clearing it out and coming back the next day the room had dried out and I noticed that a heavy, oppressive atmosphere had disappeared from that room that wasn't noticeable until it was gone.

@TheTubeDude

Жыл бұрын

I seen where slobs put their lunch scraps and packaging trash inside the walls. Just kidding. But I'm sure it happens.

This is the best electrical tutorial I have ever seen. I have been an electrician for over 16 years and I usually don't recommend people do their own electrical, but from now on I am going to direct them to your chanel.

Ingenious and crafty. I need extra extension so bad since I moved in to my old fixer-upper home. Your video helps me out immensely. I don't have extra breaker space in the box and my electric loads are light (desktop pc and a light. Occasional vacuum cleaner) so this suits me PERFECT A+ 👍

6:28 all these years and I never considered attaching the NM clamp to the cable first, before installing it in the box. Learn something new every day.

I loved that you accounted for the little things like drilling your holes above the drywall cutline to ensure your (or future) baseboard brad nails don't hit the wiring. Also, well done on pre-attaching the cable clamp. A "push-in" style would have made that potentially somewhat easier, but the threaded ones are of course super secure. The only issue with this strategy really is when the homebuilder cheaped out and installed 2 1/4" casing as baseboard...it'd be pretty tough to achieve this with only

Good work. I’m a Journey Electrician and I learned something today. I do comercial and industrial on my day job. But I’m constantly doing side work in Peoples homes and businesses so always trying to pick up tricks on fishing wires especially across studs. I done that type of stuff but it was the baseboard trick that I thought was slick

Thanks so much for this video! I just finished adding an outlet, extending from a hallway through two closet walls into our mechanicals closet (GFCI) for a hot water recirculating system. I had to notch corner studs but everything worked as you showed. Enjoying the outcome!

Ive been looking for a video like this for MONTHS! Not one other video had the idea of removing the trim! I didn't think of that and now I know I can do what I need to without a professional! Thanks!

I love when someone makes a video that is clear and clever (watch alot of car fix videos). Too many guys don't carefully explain the steps - this guy is fantastic!

@noel8313

Жыл бұрын

That's Apples to cheesecake, adding a socket to the wall vs a top end overhaul. Lmao the tolerances... I'm sorry, just cracks me up you'd compare the 2. Shit, just compare the price difference and you'd ... well you should understand. 1 Line of work is far more complicated, and it ain't the off on one. But thank you, I'm still giggling! Too awesome

@tucson298

Жыл бұрын

I agree... very thoughtfully explained.

@brebre3582

Жыл бұрын

Indeed. I agree. Very great with good detail and clever planning ... I was amused that he said he's lousy at caulking. Tell me that's him being funny! Such an expert at this and admits caulking got him beat??!!

@natifatirecette6660

Жыл бұрын

👈👉Pour des recette tjr facil et trop bon a tout le monde 🤗🤗🥰🙏

@anothersomebody8195

Жыл бұрын

@Karl with a K ?

Was looking for something else, but this was brilliant and I will put it to good use in the future! Thank you for taking the time to share, you are an inspiration.

Great video! Did this exact thing but my walls had insulation so it took a bit more finagling. I found out my existing outlet already had another outlet chained off of it. The builders did the speed connector/backstab. I took those out and combined all 3 outlets into a wire nut with pig tail.

I've been doing this stuff for over 50 years (as a DIYer) and I have to tell you, I learned SO MUCH from watching this. You are my new hero! Thank you!!

@toriless

Жыл бұрын

Including what not to do !! Never pigtail when you have two screws instead! So BASIC! A HUGE error!!!!

@gragor11

Жыл бұрын

@@toriless Perhaps but better not do that in Canada.

@robertfrost4321

Жыл бұрын

Amen Joel

@georgegerman9009

Жыл бұрын

Same here. Been doing it the wrong way. But learn something new today. Thanks

@bradlivezey2783

Жыл бұрын

@@toriless never use both screws, code is to always pigtail

HVAC mechanic with 20+ years experience here. The way he connected the box connector to the wire first and used it to fish through the box is brilliant. I will be using that trick in the future for hard to get at boxes.

@mycaddigo

Жыл бұрын

That’s the way to go … they also make plastic snap on that you could put on after The wire is thru the hole …. Ive dabbled with those bout almost always use the medal ones ..

@stinkyham9050

Жыл бұрын

@@mycaddigo I hate the plastic ones. I find they fall out easily or don't go in to begin with but to each their own.

@mycaddigo

Жыл бұрын

@@stinkyham9050 When you’re in weird situations they can come in handy.. Electrician friend gave me a bag is full of random stuff and there were some of those inside…… But I typically Always use metal

@andrew_koala2974

Жыл бұрын

There are NO TRICKS - These are TECHNIQUES Tricks are for scammers - Magicians and circus animals Get the point and increase your vocabulary beyond elementary level Undertake an extensive reading program to better educate yourself. It will benefit you greatly. Good luck

@stinkyham9050

Жыл бұрын

@@andrew_koala2974 Someone shit in your corn flakes this morning buddy? I'm just wondering since you're so angry about my use of the word "tricks" how many trade licenses you have. I have 2, one for natural gas and propane up to an unlimited amount of BTUs/hr and the other for commercial/industrial refrigeration. Those 2 tickets let me use the word "trick" all day long if I choose and no one questions me since I'm an expert in my field.

A good man knows his own limitations, a great man admits them and refers you to a great caulk guy! Y'all helped me wire and seal my new kitchen! Thanks guys!👍

Clean and very well done. I'd even say that this is cleaner than some electricians would even try. I appreciate the methodic, organized, clean way you demonstrated this work. 5 stars.

FANTASTIC content here. Using the trim to prevent this from being a drywall and paint project is like the drywall dust clouds parting and seeing the DIY blue sky for the first time. Love this!

@tonythomas951

Жыл бұрын

and if you dont have base boards you can always add them

@stephensanford4383

Жыл бұрын

@@tonythomas951 Even if you don't have baseboards, cutting the drywall at the bottom cuts the repair to one joint instead of two.

Yes, I liked the way to vacuum cleaned the floor as you go. And I like the way you used painter's taped above the studs to identify the studs for re-nailing the dry wall and baseboard. Planning is everything. Awesome video, short and to the point. You're the man!!!

@lsteiner

Жыл бұрын

Painters tape, yep borrowing that handy dandy idea!

@michaelripperger5674

Жыл бұрын

Yeah you can tell he isn’t a real electrician. They just leave their trash on the ground

Thanks for this video. Brilliant method and very clearly explained. I have one suggestion which you might want to consider. Before you reinstall the trim, it might be a good idea to caulk the cut lines on the reinstalled drywall piece. This would preserve the integrity of the air sealing in the house for those trying to maintain a tight house with low ACH. This caulking will be covered by the trim so it doesn't have to be pretty.

@allenmoore6096

Жыл бұрын

I thought the same thing, but would have ran a bit of mud across it.

@mjremy2605

7 ай бұрын

Yes, good idea. I would have spackled it though with some plaster or such. Cheaper than caulk, flatter, and dries faster. Caulk if applied like a sandwich, may not stick to the dry plaster ends.

@larrybidinger3363

3 ай бұрын

Here's another handy tip: when doing old work, ALWAYS do it an outbuilding, where is no @$%*$ drywall. This has saved me many, many hours over the years.

@normanhaney583

2 ай бұрын

Pointless if this is an interior wall

I appreciate that you acknowledge you are not great at caulking and refer to another channel. (Regardless if you are affiliated or not). This gives you MORE credibility in my opinion. Great video.

That was beautiful, and so much simpler than I thought it would be. Thank you for this!

As an electrician I am genuinely happy to see nothing scabby here. Well done

Thank you very much for the DYI video, it was AMAZING and specially for me who is a rookie working in home improvement projects.

Good Job, finally someone showing it the right way. As a license electrician its nice to see the code followed and solid advice.

Been an electrician for 40 years and a contractor for 30. Never thought of this. Now I want to buy and learn how to use a brad nailer. Great job!

@fakeaccount8342

Жыл бұрын

Fuck all that shit bro, staples and duct tape is where it's at!

Your video taught me a great deal. Until now I've been more surgical at this type of work--cutting smaller holes just at the studs, then passing the wire through notches and kick plates. But that leads to occasional difficulties remounting the trim or sheetrock between the added space of the kick plates and their nail-repelling properties. Your method, with the wholesale removal of the sheetrock at the beginning, avoids all those problems and only adds a little extra cleanup. Thank you for showing us!

@danbeeson9564

Жыл бұрын

If you do have a situation where you still have to cut through and patch drywall it is by far easier to cut a 5 inch wide channel the entire distance and patch it as one piece. Reinstalling little pieces Takes more time and requires more work to mud the wall smooth than one long patch

@denverbraughler3948

Жыл бұрын

Nail plates are required whenever the cable is less than 1.25” deep.

IBEW retired ten years. I like the tool you used to removed the trim. I never saw one before. Never did much residential work, but with with daughters who own homes I am always adding outlets or lighting in closed work situations. Nice video. Rather than using a plastic old work box I cut the nails off a plastic nail on box and drywall screw it to a stud.

The second outlet protrudes past the finish plate because the four ear tabs weren't broken off where they contact the blue box. Break them off so the outlet is at the same depth as an outlet whose ears contact the drywall. Don't use an inch drill bit so close to the end of a stud, especially if the wall is load bearing. Use a half inch bit.

I’ve done a lot of electrical work in my life but this is the first time I’ve seen this trick. It’s quite brilliant. Thank you for the edu.

Now this is a video! Straight to the point, logical and clean! Thank you, great info here!

Genuinely impressed, I’ve been renovating homes for 10 years, I have to say, you did this like a real pro and used all of the correct tools and smartest methods for a great job. 👍🏼

I saw this video just before Christmas. Then I followed the process and added lights to a non-illuminated closet. Thank you for doing this video. I learned something and now we have seen the light in our closet.

Residential electrician here. BEST KZread tutorial I've come across. He didn't miss a thing for old work! In a perfect world, a romex staple would be placed below the box to secure the wire, but it's not a perfect world. This however, in my opinion was a perfect install. PS We dont use wago connectors because they're expensive lol

@udavidism

Жыл бұрын

We don't use Wago connectors because they're garbage. At 8:42 and again at 9:16 he said "we don't back wire" that's because all real electricians know that is garbage. Using Wago connectors IS BACK WIRING!

@empireofdirt9045

Жыл бұрын

We don’t use Wago’s because they fail to much. Use a wire nut!

@SonofStormblessed

Жыл бұрын

​@empireofdirt9045 my first thought. I just assume everyone suggesting to use Wegos is a hack...because they are. The amount of times I've had to replace burnt-out wegos is ridiculous.

@jesseneumeyer4279

Жыл бұрын

@@empireofdirt9045 The lever ones arent as bad as the spring clip ones, but the point stands, wire nuts are better and cheaper

Brilliant!!! I'm a retired master electrician with almost 60 years experience - why did I never think of this????? Many thanks!

Doing your work behind the trim is genius

I love the play on DIY-er! I’m about to use this very helpful lesson info to put an outlet on the opposite side of the wall, six feet over. Thank you for sharing this method!

Awesome video. As a homeowner on a slab with a zillion inches of insulation in the attic, I always wondered how I would do this. Now I know!

if you want to strengthen the box and keep it from damaging the drywall. only a very small amount of drywall is keeping the box secure. put some glue on 2 pieces of lath about 4" long and glue it to the top and bottom inside of the drywall where the tabs hold the outlet in place. I then use claps and let them dry. it will dissipate the stress from pulling the plug from the outlet.

Thank you for this video. We’ve installed a few outlets and this method will help us save the customer a few hundred and while also allowing us to make additional profit. A win win method. The only addition I would make is wire protectors mounted to the studs, to avoid the off chance of a screw or nail going into the wire during a later renovation.

Thanks for aharing this video. In the Netherlands we have often filled walls. That means that we often have to mill the wall for an extra outlet.

Awesome video! Going behind the base to drill the holes was very smart. I have never done that so you just showed me something brilliant. I’m familiar with wiring new houses that a remodel like this seems challenging. Thanks!

@EverydayHomeRepairs

Жыл бұрын

Thanks man, how is your house coming along?

@rogeriomoura6557

Жыл бұрын

kzread.info/dash/bejne/eWmrm7OcecScedo.html

@denverbraughler3948

Жыл бұрын

Don’t forget to install nail plates to protect the cable from severe damage as required by the NEC.

@maxderman447

Жыл бұрын

@@denverbraughler3948 nail plates are only required if the edge of the hole is closer than 1.25" to the face of the stud. 3.5" stud, 1.25" on each side, 1" hole in the center. Perfect

@denverbraughler3948

Жыл бұрын

@@maxderman447: Yes, but then running the cable behind the baseboard is fine. He didn’t mention centering the holes in the studs. He specifically mentioned not to run the cable behind the baseboard that needed to be re-nailed. Why is this if the cable has the baseboard plus more 1.25” of stud depth protecting it? Did you watch the video?

I am one of the senior maintenance technicians at my job, and although I fall under the mechanic side of things, we all crosstrain into the other departments such as electricians and welders. Working in the industrial market, you'd think residential projects would be child's play, but that's not always the case. This channel provides exceptional advice that would otherwise be costly to hire out and this is one of the many channels that have been well thought out.

@tonybloomfield5635

Жыл бұрын

I worked as a network and communications cabler for many years. Getting cables from A to B is almost always harder in domestic versus commercial situations. The threshold of what is visually acceptable, conduit, ducting etc is much lower if it's not someone's home (with some exceptions).

this is genius. i will do this tomorrow. thank you!

What a great video. This is one of the best do it yourself videos I've ever watched. Thank you

I did electrical work in the navy, but avoiding drywall work is why I hesitated to do work on my home. This was super easy, and I'll be using this for sure.

@andrew_koala2974

Жыл бұрын

Brian Brian NAVY not navy You should have been paying attention and been more observant NAVY is Military navy is a name ascribed to a color They sound the same BUT they are not the same. Pay close attention to what is written on NAVY aircraft And be sure to always see ""exactly"" what it is you are L00KING at.

@brianfox340

Жыл бұрын

@@andrew_koala2974 As a fellow pedant, I do appreciate the accurate correction, but I intentionally don't capitalize out of disrespect. Was not a fan of my experience.

@stinkyham9050

Жыл бұрын

@@andrew_koala2974 Do you just go around looking for the smallest error in a person comment just so you can leave a reply acting like your superior. I've seen a few of your other replies and seems like you feel you're always better then them. Were you even in the Navy since you're lecturing someone that was in the Navy.

I am about to start remodeling a bathroom including a new vanity with a sink. There never was a light above the sink, but there's an outlet on the wall to the left of the sink. I'm going to install a light on the wall where the back of the vanity will sit, and plan to tap off of the outlet. I knew I had seen this video before and thought I had saved it, which I didn't. At the time, I didn't know that it would come in handy. Now that I have my plans made I have to run romex through 2 walls that come together at a 90 degree angle. Your video makes it look easy, and it probably is. I'm going to take my time making the cuts and running the wire. I have the luxury of time for a change because the bathroom is on the top floor (we have 3 levels which includes a nice finished basement) and rarely gets used, but it needs to be remodeled. I'm so glad I found this video and appreciate your example and explanation! I'm really anxious to take on this challenge!

That's awesome sir! Thanks for the share. I already learned something new today and it's only 730am!

I been a sparky for 30 years and I still picked up a couple tricks here. I love the use of a magnet and the block to keep your cut level. Cheers Pal.

@andrew_koala2974

Жыл бұрын

One is never too old to learn anything - providing one has an open mind and is teachable.

Thanks for another helpful video.Your work is well done and safe. Sorry there seem to be so many critics on KZread. Wago 221 is rated for solid or stranded wire at 20 amps and are NEC rated. As you already know, it is important to strip wires to the right length so the Wago clamp (or clamp style receptacle screw) doesn't catch the insulation and cause a bad connection. Most of us have used wire nuts forever but they are not foolproof and may not always grab all wires equally-you can end up with a funky connection. I pre-twist wires before putting on the wire nut. I installed an old work box under a kitchen sink (very little space to work) and the old drywall crumbled from the clamp pressure. I screwed the box to the stud and it was totally solid.

Great job thanks for sharing have a blessed day

I learned so much from this! Thanks

Very nice lesson here, I was a builder/ remodeling contractor for way too many years so I do appreciate this method.

Wow, that was amazing! As a non-electricaller, I had to rewatch the 8:18 part over about the lever nuts, but it made sense! I can't believe how clean a job you did, really fantastic and well explained.

@charlesco7413

Жыл бұрын

Yeah i rewatched that several times as i thought he was talking about the bundle of wires in the box somehow "pulling the wire" into the box? and i was like (What?)..?

@patrickhaege3121

Жыл бұрын

If you’re using a cut in box you should take those little washes off the top and bottom of the receptacle that way it won’t stick out too far and have a gap on your plate

@cougar24

Жыл бұрын

@@patrickhaege3121 You are talking about taking the "ears" off of the receptical so it fits in the screw slot in the cut in box.

Another awesome DIY video. I'm going back and re-connecting wires in several switches with Wago connecters. And I now know that I can add an outlet. Thanks again!

@ideengelsma603

4 ай бұрын

never use WAGO 221 for solid copper wire. Use wago 2273 for this. The wago 221 are only for flexible fine multistrand copper wire!!

Scott, I just found your channel via my recommendations. I had no idea who you were and what your channel was about--I was just interested in this video. However, you have completely blown me away with how straightforward and informative you are in your videos. I am by no means a pro, and I wouldn't even call myself a DIYer just yet, but I think that I can definitely begin tackling more home projects well with guidance from your videos. Just let me say this: you make some of the best tutorials I have ever seen. Please keep up the great work!

Great tutorial. Everything about this from running behind the base to drilling your holes above the base height. Great video and so easy to follow.

@repentandbelieveinJesusChrist3

Жыл бұрын

Repent to Jesus Christ “Cast all your anxiety on him because he cares for you.” ‭‭1 Peter‬ ‭5:7‬ ‭NIV‬‬

I liked this. I have done this. The most pleasing thing to me is telling people to be consistent.. vertical or horizontal with the plate screws. That's not just OCD, it is a professional look.

@EverydayHomeRepairs

3 ай бұрын

Agreed.

I’m not afraid of having to do a little mudding, caulking and painting but, OMG; this tip is brilliant. I’m now imagining never running out of outlets. The Husband isn’t convinced but I’m getting myself a WAGO kit and fixing a bunch of stuff myself. Done waiting.

@Pinko-Diamond

10 ай бұрын

I love having outlets exactly where I need them!

@defeatSpace

9 ай бұрын

your house is going to burn down

@jeffmuller1489

8 ай бұрын

Don't overload your circuits.

@PW-iz8yk

6 ай бұрын

I replaced an outlet for the first time,i turned off ALL electricity i wasn't taking any chances the only problem was the thick neutral and hot wires damn took forever.One proud lady!

This was surprisingly good. I see a lot of contractors in the comment section complementing your work. I’m not a contractor but I’ve done enough electrical work to know that this job was very well done.

@Naldo_S1K

Жыл бұрын

@Karl with a K wha?

I did this to hide an alarm wire & thought I was a mad genius🤣 Best tutorial and love how you clean as you go. Excellent work!!

Currently on this project; very well explained, thank you sir!

You are really cool teacher well experienced, thank you.

I do love watching someone who knows what they are doing and can explain while they work. May you live long and prosper!

@kerrydavis4290

Жыл бұрын

Well, he wasn't really explaining while he worked, it was edited and narrated and stuff.

@calculator1841

Жыл бұрын

@@kerrydavis4290 He what's what "he's doing", but ain't right.

@truthseekerKJV

Жыл бұрын

Sodomites rarely live past the age of 55. Either by disease or sucide.

I’m not an electrician but 2 of my brothers are, I loved your video and will share this with them. Great job!! Nice and neat toolbox too!

OUTSTANDING! Was exactly the video I was looking for, same project as you but would need to go further, around the corner from your new outlet and never dawned on me to pull trim and run it. Liked, saved, subbed! Thank you!

so much detail dude, good on ya, love the video, everyone should do so much description it is very helpful

I've been a contractor 30+ years. I wasn't sold on this process at first. But this guy covered all the issues. I'm impressed and can back him up. Thanks for not being a hack- good job!

@michael184272

Жыл бұрын

One question...why did he pigtail the wires in the new Romex with the existing Romex.. wouldn't it have been possible to connect the black - white new wires onto the bottom screws of the existing outlet.. what am I missing? Any information would be appreciated 👍

@blessedwithchallenges9917

Жыл бұрын

@@michael184272 length maybe? I don't remember the whole video at this point.

@navigator710

Жыл бұрын

​@@michael184272 He had a whole box of Wago nuts and just wanted to use them. But you're correct, in that the new black and white wires could have been connected to the bottom screws of the original outlet.

@michael184272

Жыл бұрын

@@navigator710 Thank you

@craigchatterton4164

Жыл бұрын

@@michael184272 I was gonna ask this same question! Thanks for beating me to it two months ago. 🙂

New subscriber after watching this. One of the best, clearest descriptions of the work I’ve seen on KZread. Very well done. Look forward to seeing your other videos.

I have this exact job to do.Thanks for the tip.

Great video !! Thank you for explaining in detail without "talking just to hear yourself talk " as many people tend to do. I'd like to offer an additional tip if I may concerning the cutting of the drywall : I've found that using a slightly sharpened scraper blade on the oscillating tool instead of a standard toothed blade cuts just as well and generates far less dust. Also, I'm sure that people who hire you appreciate your cleaning up the area when finished - sure, it takes a few more seconds, but it results in repeat business and positive referrals !

You make it look soooo easy, and that's because you are GOOD at what you do. Thank you for such a great video!!

Excellent work, have run only a few extra outlets through drywall , but they were above kitchen counter level and a bit tricky. But I had not heard about the lever wire connectors, so thanks for letting me learn something today!!

@toriless

Жыл бұрын

Get certified ones like the Wago not generic garbage.

Great video, you can tell you’re a professional. I’ve always wondered how to do this

Great video and very well explained. Best one I have seen in a long time.

You deserve as much viewership and recognition as my boy Jeff over at ‘Home RenoVision’. Keep up the good work, you’re helping a lot of folks out.

@EverydayHomeRepairs

Жыл бұрын

Thanks for the kind words, those are some big shoes to fill but I will keep cranking 👍👍

@mrnapolean1

Жыл бұрын

Jeff is one of the guys who taught me how to tape and bed drywall. Without him and Vancouver Carpenter, I wouldnt know nothing about drywall.

@denverbraughler3948

Жыл бұрын

Failed to install required steel nail plates.

@ericfranke1637

Жыл бұрын

@@denverbraughler3948 and how exactly would that be achieved with the drywall up?

@denverbraughler3948

Жыл бұрын

@@ericfranke1637: The drywall was cut out behind the baseboard to run the cable.

You just blew my mind. I was getting sick of cutting drywall and drilling through the stud and then muddying sanding texturing and painting this just saves so much time you are awesome

@denverbraughler3948

Жыл бұрын

He should have mudded to avoid leaking air and giving insects a place to hide.

Wow! Great informative video! Thank you for taking the time and effort to put this together.

Excellent instruction. The background information adds clarity and insight into the work. Excellent video production and commentary.

This was a great video. I have to add outlets to a lot of customers home for tv installations, and this is helpful. The only thing I might recommend is not pulling the entire length of romex through the drywall at the new outlet location but rather feed it through the studs first and then back feed it up to the new hole ln the sheetrock so that the romex doesn't have a chance to tear or damage the drywall. I've damaged enough sheetrock by accident by pulling lengths of romex through a new hole.

Thank you for your clear explanation and showing how. The wooden block guide was awesome to see. Drilling the holes above the danger zone is sweet. I also love the Amazon store suggested products. Cutting the previous fasteners on the rear side of the trip keeps the job looking sharp! Please continue with the guidance and direction. Very much appreciated!

Thanks for this. Going to be adding a receptacle soon. Also, going to try the Wago connectors.

beautiful work, you make it look easy lol. I myself use Wago connectors and love them.

Great video! This is a project I've considered at various times but never knew how to approach. Thanks for the awesome and easy to understand content.