I got a mention from the legend!!

@TimmyTheToolman

Жыл бұрын

Your video also pops up at play time 6:22, I just added it, and I link your video in the video description. Unlike some content creators who try to claim others work as their own, I do try my best to give credit where credit is due and your video definitely helped me out. So, Thanks Minh!

@PhoRunner

Жыл бұрын

​@@TimmyTheToolman More videos the better!! I love all your videos, especially the more complex ones. I try not to make dupe videos unless I think there's some value added (different technique or approach). I got the plastic abs idea from some other "non toyota" channel doing the fuse block and thought it was cool. Can't remember who now. I like what you did by using the circuit right there in the fuse box. I guess I couldn't do that as mine is always hot but that keeps things cleaner! (I like "clean" installs) Great video!

@TimmyTheToolman

Жыл бұрын

@@PhoRunner Thank Minh. I'm the same as you and only like to make videos where I think I can make a big difference. There are lots and lots of Auxbeam Install videos in existence, but since our channel is lacking a lighting system series, I figured what the hell, it will help some people, so it's still worth creating. By the way, I did get the idea for using the engine compartment fuse box as potential fuse location to tap into from some guys video. I don't remember whose it was because I skimmed through lots of videos to see what was out there. I guess I got lucky and found one that would work in my 98. Sean chose the tail light circuit so his only gets powered on when he has his parking lights or headlights on.

As always you are the champion of the normal people that aren't heavily funded. Thanks for this video

@TimmyTheToolman

Жыл бұрын

Yep, I know there's people who will dump 15k into lighting, but I'm not one those people and I reckon most of our audience isn't either. An affordable and dependable system like Auxbeam offers is the type of lighting system I wanted to feature on our channel.

I had been thinking about installing one of these. Now I’m sold. Thanks Tim!

@TimmyTheToolman

Жыл бұрын

No problem Nick.

Thank for taking the time to present this tutorial regarding this light system. As a first gen tacoma owner (2 times over), after watching alot of your videos I greatly appreciate the time & resources that you, Sean and all the others spend on making and presenting these videos. They have helped me out several times (and I am sure others) have saved money. I live out of the country, but if I lived locally I would definitely have met up for your get-together.s You all are very humbling people. You all have a great thanksgiving and take care, David .

@TimmyTheToolman

Жыл бұрын

Thanks for letting us know our videos have helped you out. The internet has definitely been a game changer with the reach people can have. Most of the people that have used our videos come from the U.S., Canada and Australia but we've gotten comments from people living in a whole host of other countries as well. We like helping people and that's our primary motivator to keep doing it. You have a nice Thanksgiving as well David.

So on my 2k 4runner I didn't have that spot to hook up my acc wire where you did. So I went to my DRL and it worked just as well. So if anyone is watching this and reads this comment. You can use that spot with no problem! Thanks Timmy!!

@TimmyTheToolman

Жыл бұрын

Thanks for the comment, and you're very welcome.

I have been using the 6 gang for 2 years on my Honda UTV and it is great with no problems, it is much better than multiple switches and multiple wires that I use to use. Thanks for the video.

@TimmyTheToolman

3 ай бұрын

Yeah, we're liking our switch panels too. You're very welcome.

Great video, super helpful! I used the Scarab Offroad mounting plate for the fuse block and mounted the control panel in place of my ashtray. The bracket that holds the slide out ashtray comes out with two screws, so I made a simple bracket using aluminum angle to take it's place.

@TimmyTheToolman

Жыл бұрын

Thanks! We're happy to know our video helped you out. Good job on the install. Happy Wrenching!

Saw a lot of clean install on the panel but that's probabaly the most clean and neat install on the switch assembly that we saw so far

@TimmyTheToolman

Жыл бұрын

Wow, thanks for the nice compliment on our job installing your products. We appreciate it!

@Auxbeam

Жыл бұрын

@@TimmyTheToolman You're welcome! I am just stating the truth! You guys are pro on this install!

Great video - thanks and really helpful to give me an idea when I install my auxbeam (soon). Also, 13:35, Michael Scott would be proud.

@TimmyTheToolman

Жыл бұрын

You're welcome and good luck with your Auxbeam switch panel install.

14:02 is where Timmy mounts it incase any of you guys are super impatient like me. There is not alot of mounting options for the 3rd gen 4Runners. Anyway another great video from TIMMY! 20:10 is where I mounted stuff in mine

@TimmyTheToolman

Жыл бұрын

Glad you like the video Blake.

A very thorough installation instructions video mate!

@TimmyTheToolman

Жыл бұрын

Thanks!

@JT-jy2sy

Жыл бұрын

I want to use this to replace my existing switch on my boat. The switching is just a standard one with accessory wires connected to the back. It is mounted on the dash with a cut out for the accessory wires to go through. This switch you are reviewing the size should cover the cut out. What is not sure to me is , does this have a mount option for me to screw onto the dash in place of the existing switch? Thanks!

@TimmyTheToolman

Жыл бұрын

@@JT-jy2sy Yes, it comes with a mount that can be screwed into something.

Very motivating to do this sicmod 🤘

@TimmyTheToolman

Жыл бұрын

That's what we're all about, .motivating people to do Sic Mods!

Very nice. I have the oldie 4 gang that's just regular old school switches. I've thought about the 6 gang like the one on the vid, just might snag one. As for auxbeam, I've been using their lights for years and love them. I have always bought their more expensive ones rather then their cheaper ones. Great lights 😎👍

@TimmyTheToolman

Жыл бұрын

Thanks for the comment. Good to hear more support for our choice of lighting for our rigs.

@Basshead40

Жыл бұрын

@@TimmyTheToolman You bet! Love the vids, I too have a 3rd gen. 2000 SR5. Have had it since it was new. Picked my wife of 18 years up in it, raised 4 girls in it. Over the last year and a half I've redone so so so much of it. I've used your videos for numerous things I've replaced so I thank you for all the great content and dedication to the mighty 3rd gen 4runner. I'll have mine until the day I die.

@TimmyTheToolman

Жыл бұрын

@@Basshead40 That's awesome you've owned it since new. You have a lot of memories stored up with your rig. Great to know our videos are helping you keep it in good running shape. I'll probably never sell mine either.

@Basshead40

Жыл бұрын

@@TimmyTheToolman Yes sir it's literally part of the family. Every one of us look at it like an extension of our own selves in ways. It's just been through everything with us. All the happy fun adventurous times to the rough and hard times the family's went through. The ol 4runner was there through them all. Total toyota commercial right there huh 😁👍

Great video. Very helpful for my upcoming install 😃

@TimmyTheToolman

6 ай бұрын

Thanks! Good luck with your switch panel and light installs.

Can't wait to get mine this week! it's the newest 8 gang version. 🤙 yeee

@TimmyTheToolman

Жыл бұрын

Sweet! Have fun with the install.

@isa_4funner

Жыл бұрын

@@TimmyTheToolman Thanks will do! hah

Thank you sir! Very clearly!

@TimmyTheToolman

Жыл бұрын

You're very welcome!

Would be cool to 3d print an overhead replacement that could accept that panel. Use the stock screws and have power for map lights, etc... My 2000 SR5 has a little compartment for sunglasses or a door opener. Have to take a look at it later.

@TimmyTheToolman

Жыл бұрын

Hey David, it's been done. I guy just messaged me through Facebook and showed me a pic of his. Looks clean.

@toastrecon

Жыл бұрын

@@TimmyTheToolman cool!

Thanks for this video, I was stuck on how to install the lights because of the plug haha

@TimmyTheToolman

3 ай бұрын

No problem Daniel. I'm glad our video helped you out.

@Danielxperez14

3 ай бұрын

yea it did, im loving my lights now@@TimmyTheToolman

@TimmyTheToolman

3 ай бұрын

@@Danielxperez14 Awesome. I'm enjoying my Auxbeam light set-up as well.

Sick!

@TimmyTheToolman

Жыл бұрын

We agree! It is a Sick Mod.

So on the 6 gang switch panel do I need to ground each individual led light and just put the positive wire into the panel box?

I have a question maybe you can help me with, I have everything hooked up and my panel gets power but my switch isnt powering on my lights. Can I run a 25A through any of those ports? Or does it have to be through the 30 amp cause thats the only thing I can think of. Unless my light bar is defective which I will have to test once I can get back to working on it.

Sick Mod fo sho!

@TimmyTheToolman

5 ай бұрын

Mods on mods on mods on mods on mods on mods!!! - Sean

Bruh this is perfect I have a 3rd gen

@TimmyTheToolman

Ай бұрын

Get that panel and your lights installed. Happy Wiring!

Great video helped alot with mounting! Have a 2 questions though sunce the unstuctiin auxbeam has arent perfect. 1. Dies the black wire from the panel go to the negative post of the battery or a ground? Or does it not matter? 2. Do you have to change the fuse in the add a fuse based on the amperage of what you are putting in the auxbeam fuse panal? I know you have to change the fuse in the box based on amps of the accessory, but dies the add a fuse need to be changed as well? Thanks again for the video!

@TimmyTheToolman

9 ай бұрын

The negative wire from the panel can go to the negative battery terminal or a body ground. It doesn't matter. For the Add a Fuse, you would just match the same amperage fuse for the circuit you're tapping into. I tapped into the Power Outlet fuse spot in the engine compartment fuse box which uses a 15amp fuse, so I just installed a second 15amp fuse into the tap a fuse. I don't think it matters what you're powering with the fuse block in regards to what amperage circuit you tap into. I think all the small red wire is powering is the communication between the switch panel and fuse block.

Great video. I am planning to install my 6 gang Auxbeam in my Dodge Ram and your installs gave me some good ideas. I did have one question. What was the digital display component on Sean’s battery?

@TimmyTheToolman

11 ай бұрын

That digital display is just a volt meter that is built into the inline fuse.

So I got a random question for you, can you use one of these to wire a chase light? Most chase lights come with their own switch to toggle through the modes, do you know if you use this if you able to toggle through the modes without the original switch

@TimmyTheToolman

Жыл бұрын

I'm not familiar with chase lights but we do think you could use a separate switch to toggle through the modes. I personally wouldn't do it because it's just another switch you have to mount inside your cab. I originally had chosen multi-mode lights for most of the lights I installed on my 98 4runner, so I would have had to run 4 switches into my cab to change the mode functions. I guess if it was just one of two lights, that wouldn't be a bad way to go if you really wanted to have the multi-mode lights. If you try out running a separate switch to the mode wire (yellow wire), let us know how it works out.

On the 6 gang, if you press the on/off switch can you change any button to momentary or puls mode??

@TimmyTheToolman

8 ай бұрын

The 6 gang and the 8 gang in this video don't have the momentary function but Auxbeam does make switch panels with that functionality.

Does your basic switch panel do momentary also? If I want to operate an airhorn or a starter relay?

@TimmyTheToolman

11 ай бұрын

They don't do momentary, but Auxbeam does sell other models that do have momentary function.

I'm wondering how the velcro is holding up? I have the 6-Gang that I'm going to install soon and was thinking of doing something similar. My 2022 4runner doesn't leave much mounting room without having to relocate a relay box.

@TimmyTheToolman

Жыл бұрын

I used velcro for the 8 Gang Switch panel and it's holding up very well. No issues. They make really strong velcro, up to a 15 lb hold. You can buy it at Home Depot.

@novagurl2763

Жыл бұрын

@@TimmyTheToolman thanks! I was worried about the best affecting the adhesive.

@TimmyTheToolman

Жыл бұрын

@@novagurl2763 No problem.

Any more details on the piece Sean used to prevent the water from coming through the grommet?

@TimmyTheToolman

6 ай бұрын

No additional info on this part. We can’t find the .STL file for this mod. Maybe we will design another version and put it in the video description in the future. - Sean

Thanks for the video, is there a way to have 1 of the switches on constant power while still using this setup. I want to be able to use my uhf radio without acc on. Also if the whole system was on constant power would it still drain the battery even if all the accessories are turned off? Cheers

@TimmyTheToolman

Жыл бұрын

I don't believe you could just have one with constant power. It's all or nothing. When the switch panel is run to constant, the switch panel will stay lit up all the time. If you drive your rig every day, those panel lights might not be enough to drain the battery. If your rig sits for days at a time, you might find you have a dead battery. I don't know how much power the switch panel light draws but they obviously will be drawing some power. I guess the only comparison I can make is a blinking car alarm is on all the time and it won't drain the battery that quickly. But, the panel light is probably a larger power draw than a small blinking LED alarm light.

@reecemist7018

Жыл бұрын

@@TimmyTheToolman thanks for the reply, I just had another thought, would it work for me to hook it up to constant power then tee off and run a wire to a basic switch inside the cab. Then I can choose to power up or turn off the panel at anytime from inside the cab?

@TimmyTheToolman

Жыл бұрын

@@reecemist7018 I think that would work.

My question is about the Fuse Blocks, the 6 gang has relays on it but the 8 gang doesn’t. I have a couple lights already connected and want to eliminate all the different switches and just go with the switch panel. Each one of my lights came with the wiring and they all have relays. Is the fuse block with Relays necessary/better? Or not necessary?

@TimmyTheToolman

Жыл бұрын

The 8 gang switch panel has built-in relays you can't see. It's slimmer and nicer than the more bulky 6 gang panel, in my opinion.

@MA1DIT01

Жыл бұрын

@@TimmyTheToolman thank you!

@TimmyTheToolman

Жыл бұрын

@@MA1DIT01 You're welcome!

Great video and walk through. There shouldn't be any issues if you want to bump up the 5A or 10A port to a 15A right?

@TimmyTheToolman

10 ай бұрын

I don't think so. I'm pretty sure the internal guts of the switch are the same with no difference with the relays for all the circuits. At least that's what makes sense to me. You just want to put in the correct amperage fuse for what you are powering with that circuit. But, you might want to consult with Auxbeam just to be sure. I did switch fuses for some of the circuits with no negative effects.

@DuanDao

10 ай бұрын

@@TimmyTheToolman thanks, that's what I figured. All the relays they used on the 6 gang are all the same. Thanks Tim!

@TimmyTheToolman

10 ай бұрын

@@DuanDao No problem.

So for the 6 gang , you don’t need to tap it into a separate fuse necessarily?

@TimmyTheToolman

Жыл бұрын

For both the 6 and 8 gang switch panels, we tapped into fuses. Sean tapped into the headlight fuse and I tapped into the accessory outlet fuse to power our switch panels.

What is the point of using the fuse jump if you are powering to the battery? Just curious.

@TimmyTheToolman

6 ай бұрын

The power cables from the battery to the posts on the fuse panel is to bring 12 volt power to the panel. The small red wire that we attached to the tap-a-fuse is to provide 12 volt switched power to the switch panel inside the cab.

hahaha.. "that what she said" 13:34

@TimmyTheToolman

21 күн бұрын

Hey! Someone noticed our humor. Good job!

Do these switches have a memory? So when you turn the vehicle off and back on does it remembers what switches were on? Thanks.

@TimmyTheToolman

11 ай бұрын

There is no memory. When you turn the vehicle off, the switches reset to off.

In regards to the 6 gang switch panel How would I go about wiring up Diode dynamics pods since they come with 3 wires

@TimmyTheToolman

Жыл бұрын

The 3rd wire must be for a switch to control multiple modes. It would be best to use the original harness the lights came with and not use the switch panel to power it. I talk about the limitations of these switch panels in regards to lights with multiple modes in the video.

@yoterchris1028

Жыл бұрын

Nevermind the 6 gang panel. I ended up using the 8 gang panel and wired both pods to one switch and I wired the third wire to a 2nd terminal for the backlight. It worked out great! I wasn’t trying to use their harness. Keeps the engine bay looking cleaner;) So, so far no limitations on the 8 gang in my case✊🏻

@TimmyTheToolman

Жыл бұрын

@yoterchris1028 Yep, what you did is an option. But, if you have a lot of lights that all required a 2nd switch for it to operate as intended, you would run out of circuits. The case I was referring to was lights with multiple functions. A simple on/off wouldn't have worked for that application. I'm glad the 8 Gang worked out for your needs.

Can the Auxbeam 8 gang switch panel fit on a 2023 Ford Bronco next to the gear shift, in the area where the bronco word is screwed on?

@TimmyTheToolman

Ай бұрын

No, it will only fit Toyota models. - Sean

@2flygirl

Ай бұрын

@@TimmyTheToolman Thank you for your help.

I see auxbeam puts a graduated series of fuses in their box. Is there any reason why you can’t put a larger fuse in place of the smaller ones? Just in case I have 4 or 5 high current draw accessories.

@TimmyTheToolman

6 ай бұрын

Yeah, I swapped some smaller fuses out for larger ones without issue. It would be weird that they would put different relays for every circuit. It's my guess that every circuit has the same relay.

@gregdenton5282

6 ай бұрын

@@TimmyTheToolman thanks

@TimmyTheToolman

6 ай бұрын

@@gregdenton5282 No problem

Do you remember the dimensions for the clear plastic mount that you made?

@TimmyTheToolman

Жыл бұрын

I don't know the exact dimensions. You could easily figure out how big to make yours by setting the switch panel and fuse next to each other and then measure the length and width needed. It's pretty straightforward.

Does the 8 gang have relays like the 6 gang does?

@TimmyTheToolman

Жыл бұрын

Yes, they are built into the switch panel.

so does the 8 channel have relays also or no?

@TimmyTheToolman

11 ай бұрын

Yes, the 8 gang switch panel has relays. They are built into the panel.

Should one buying the aux beam 6 be worried it doesn't come with an INLINE FUSE?

@TimmyTheToolman

8 ай бұрын

No. You can simply add your own inline fuse. It's a good idea to have one.

I'm having an issue with the LED panel not turning off even when vehicle is off. Double and triple checked my wiring and even had an accessory light controlled by the panel. No other lighting or connection issues to trace. LED panel stays lit. Any ideas?

@TimmyTheToolman

6 ай бұрын

Did you check that the circuit you tapped into to power the panel is not 12 volt constant? That's what seems to be the problem. You need to be tapped into a circuit that is 12 volt switched, meaning, you only get power once you turn the ignition key to the ACC or "On" position.

@AaronLives34

6 ай бұрын

@@TimmyTheToolman I have it in radio 30a but that must be a constant? I'm getting a circuit tester this morning and going back at it. Appreciate the reply.

What is the fuse wattage on the tap fuse?

@TimmyTheToolman

Жыл бұрын

I don't know what the max amperage of the tap a fuse is.

Hi Timmy, I still look forward to your uploads and enjoy your work. My question has nothing to do with this video, and I apologize. However, I am working on removing the fender liners on my 3rd Gen, and the clips holding them are almost impossible to remove without breaking them. Do you, or do you know anyone who knows the Toyota part # for these clips, as I would like to replace them? Thanks in advance.

@TimmyTheToolman

Жыл бұрын

Yeah, it's fairly impossible to remove those clips without breaking them. I don't know the part number for those clips. I'd just go to the dealership and buy one so you know the part number and then you could order the rest from an online seller to save money.

@TimmyTheToolman

Жыл бұрын

The Toyota part number is: 90189-06212 It’s referred to as a grommet screw. But check out this link for a pack of 20 universal clips. amzn.to/3gYkHOz You can also go inside the engine bay and see the tops of the clips on the top of the fender. You can pinch the ends of those fender liner clips with some pliers and push them through. - Sean

@retrowonder1097

Жыл бұрын

Thanks Timmy and Sean. I will order a couple and see if they're the same. I also checked Amazon after contacting you and I think they're available for a decent price. Also, unfortunately the dealers here are not cooperate like the ones you have. Thanks again

I have power (my buttons light up) but when I press each button to turn on a specific circuit nothing happens. No red light on above the button, etc. any advise?

@TimmyTheToolman

9 ай бұрын

Did you make sure the wire that communicates with the fuse panel is connected to the switch and to the panel?

@justinmireles8006

9 ай бұрын

@@TimmyTheToolman thanks for the reply! yeah everything looks good. I contacted customer service so I guess we’ll see what they say Monday. I’ve heard other people had similar issues and they’ve sent new units so 🤞

@TimmyTheToolman

9 ай бұрын

@justinmireles8006 Yeah, it sounds like a defective unit.

how thick is the 8 gang fuse block? I have a tight space on my sxs

@TimmyTheToolman

Жыл бұрын

You can kind of get an idea from the video but check out Auxbeams website for product details - Sean

@thefalloutshelter7799

Жыл бұрын

@@TimmyTheToolman Thanks. I dont think Auxbeam realizes the world has 3 dimensions....they only give length and width.....and forget getting a response to email or phone call haha

@TimmyTheToolman

Жыл бұрын

@@thefalloutshelter7799 stand by.. we will measure that tomorrow

@thefalloutshelter7799

Жыл бұрын

@@TimmyTheToolman Thanks very much. I am still trying to get a response from Auxbeam.....if I hear back I will let you know

@TimmyTheToolman

Жыл бұрын

@@thefalloutshelter7799 It's 1 1/8" tall. - Timmy

Soo... I want to hook up 4 light pods, I have a 6 Guage Aux Beam... How do I do it?

@TimmyTheToolman

20 күн бұрын

You can hook them up to the same button if you want them all to turn on with 1 button (assuming the lights don’t exceed the limit on that bus) or you could each light up individually to their own separate buttons. - Sean

How to control the pod if it has multi modes

@TimmyTheToolman

10 ай бұрын

The switch panel is a simple on/off switch. You can't switch the modes of the lights with it.

👍

@TimmyTheToolman

Жыл бұрын

Glad you approve Arin.

Can you make it a momentary switch?

@TimmyTheToolman

Жыл бұрын

I'm pretty sure Auxbeam does sell a switch panel that has the momentary feature. The ones we installed in this video don't have that functionality. I'd go on their website and check it out.

The 8 gang is sealed and you can't swap out the relay if it goes bad the 6 gang you can swap the relays. Just an FYI

@TimmyTheToolman

9 ай бұрын

Yep, that would be correct.

So what happens when the tap a fuse doesn't fit in any of my fuse slots? And none of my fuses fit in the tap a fuse slot.

@TimmyTheToolman

Жыл бұрын

You have the wrong tap-a-fuse then. Try this link: Mini Add-a-fuse - amzn.to/2MGwaT2

@errndog

Жыл бұрын

@@TimmyTheToolman kinda disappointed Auxbeam wouldn't include multiples to avoid this problem. Thanks for your help!

@TimmyTheToolman

Жыл бұрын

What is your vehicle? Make, model and year?

@errndog

Жыл бұрын

@@TimmyTheToolman 2021 Ram Warlock

66k subs you'd think a guy could spring for a mic by now.

@TimmyTheToolman

Жыл бұрын

We've considered using mics but haven't given it much attention because most people aren't looking for crystal clear audio for DIY Automotive Videos. If the content is good and people can hear what's being said, that's all they care about. But we might do some research on some Bluetooth mics and see how it work out.

@tazzthedoodle7861

Жыл бұрын

@@TimmyTheToolman I agree, quality content is important, but so is quality audio. It's like nails on a chalkboard without a mic and you should want to do better.

@TimmyTheToolman

Жыл бұрын

@@tazzthedoodle7861 I don't think any of the audio we have in our videos could be described as nails on a chalkboard. That's a bit extreme. You're obviously someone who values audio. We've heard similar criticism before and we started using external mics on our GoPro camera which improved on the quality. Lately we've been filming mostly with iPhones. Do you have a suggestion of an external mic that will work with an iPhone?

@davidmicklo97

Жыл бұрын

If you wire the unit into a “switched” power source the Auxbeam panel is not powered unless your key is turned to the accessory position. The Auxbeam unit allows for things other than lights to be powered; for example a fridge (as depicted in the stickers). A “switched” power source wouldn’t work in that case, in that the fridge wouldn’t get power all the time. Do you know of a workaround for that situation?

Can you make that bracket for me?

@TimmyTheToolman

Жыл бұрын

Did you purchase the 6-gang switch panel?

@vitaliisheremeta2489

Жыл бұрын

@@TimmyTheToolman yes

@TimmyTheToolman

Жыл бұрын

@@vitaliisheremeta2489 I might not have the file anymore unfortunately.. I thought I put it on a thumb drive and when I was looking for it recently I couldn’t find it. Might have to design another one. 😅 - Sean

@vitaliisheremeta2489

Жыл бұрын

@@TimmyTheToolman you should design another one and start selling them. I think I’m not the only one who’s looking for that bracket

@TimmyTheToolman

Жыл бұрын

@@vitaliisheremeta2489 what would you think a fair price for something like this printed and shipped would be? - Sean