How to Install a Subpanel

Тәжірибелік нұсқаулар және стиль

In this video I show how I installed a 100 amp subpanel in my shop. I am not an electrician but I am comfortable doing a job like this myself. With that said, please do your own research before you tackle something like this on your own.

Пікірлер: 1 300

  • @dkaisel
    @dkaisel Жыл бұрын

    8 years later: This is by far the best, most detailed, most coherent wiring video I've watched. I'm trying to add a 240v welder to my 200A household panel, which has no more room. You've walked me through the process of adding a sub-panel so I feel comfortable doing it myself. I may ask my electrician buddy to give it an eye-over, but it seems pretty straightforward. I particularly appreciate seeing the TN inspector's sticker in your breaker box. My mom was a Vol, and I appreciate hearing such a clear, helpful and informative lesson in the same voice. Thanks!

  • @pld8993

    @pld8993

    Жыл бұрын

    Except for the blatant code violation of running individual conductors in a wall cavity. A real electrician, or anyone that knows what they're doing, would never do it this way.

  • @johndavies2949

    @johndavies2949

    9 ай бұрын

    You can make room in your existing panel in most cases. Replace the full size breakers with half size breakers. That will open up spots on the buss. We call them twins. If your panel is twinned out then you can add sub panel. Use to be code you could only have 42 breakers in a panel. Code changed. I've seen panels with ,60 to ,80 spaces in commercial work.

  • @IanRobinsonGlobal
    @IanRobinsonGlobal7 жыл бұрын

    This is the most helpful subpanel video I could find. Thanks for being so detailed in your description process.

  • @josephlynn8575
    @josephlynn85754 жыл бұрын

    As an Army Corps of Engineer Officer having received many instructional briefs, your instruction was clear, concise and easy to follow. Well done !

  • @donl1410

    @donl1410

    2 жыл бұрын

    But incorrectly executed...

  • @drguitar78

    @drguitar78

    Жыл бұрын

    @@donl1410 how so?

  • @donl1410

    @donl1410

    Жыл бұрын

    @@drguitar78 Did you read my following statement? NEC 300.3 Conductors. You must install that type wire in a complete raceway or conduit system. Just allowing those individual wires to float free from the j-box into the wall and through that PVC angle-cut nipple into the panel is non-compliant. 310.12 Single-Phase Dwelling Services and Feeders. While #2 alu meets the requirements of for a service or feeder the dwelling unit. A subpanel supplying additional circuits in a dwelling unit requires a #1 alu conductor. #2 has max load of 90 amps for this subpanel. #2 could be permitted by special permission of the AHJ

  • @chadjcraig
    @chadjcraig8 жыл бұрын

    I love this guy - Very thorough and yet down to earth and easy to understand. I watched a lot of videos on subpanels but this was the most entertaining with the same detailed info. Keep making more vids.

  • @GotItMade

    @GotItMade

    8 жыл бұрын

    +Chad Craig Thanks!!!!

  • @garybrayartgarybray3604
    @garybrayartgarybray36046 жыл бұрын

    I've sat thru many classes taught by professors that were a waste of time. They just couldn't teach. You have that rare teachers gene. You don't leave out the little things that hang people up and you don't try to impress with how much you know. 10 out of 10 my friend. Thanks.

  • @NMranchhand
    @NMranchhand6 жыл бұрын

    I'm just fixing to do the same job and your show and tell was much more helpful than many of the others. You've convinced me to go pull a permit. Thanks.

  • @Monkeymanxxl
    @Monkeymanxxl4 жыл бұрын

    Perhaps the most straight forward, informative DIY video that I have ever seen. Thank you.

  • @craig853
    @craig8535 жыл бұрын

    Excellent work. Bonus points for getting a permit and having the panel inspected. You, sir, do neat, organized wiring. A pleasure to watch.

  • @maddiek9
    @maddiek93 жыл бұрын

    Great video - exactly what a homeowner needs to know, especially separating the neutral and ground in the sub panel. That is a key issue not emphasized enough. Thanks

  • @Cocoatreat
    @Cocoatreat6 жыл бұрын

    Wow! I love how you explained everything simply! You did your homework and got the job done! A man not afraid of asking for directions! Thank you! Great job! We have some smart ones in my home state! Go Tennessee!

  • @GotItMade

    @GotItMade

    6 жыл бұрын

    Thanks Karen. You're sweet. :-)

  • @Benjamin_Reese
    @Benjamin_Reese5 жыл бұрын

    This video provides some fantastic advise. I appreciate the detail and the fact that you recommended getting a permit and talking to the inspector prior to beginning the project. Since I'm not a contractor I hadn't thought about that before, thank you! I love the detail!

  • @davidhoover8877
    @davidhoover88777 жыл бұрын

    You are a smart dude. I have watched a number of your videos from grading to electrical wiring. You really help the common man!

  • @Hiimmax25
    @Hiimmax255 жыл бұрын

    You “arent” an electrician yet your work looks more meticulous and well organized then a lot of the hands I’ve worked with over the years. Nice work bud. Great video. Got a real kick out of the bloopers lol

  • @chadcoady9025

    @chadcoady9025

    4 жыл бұрын

    Yeah, most electricians get paid for getting the job done, and don't get paid extra for making the box look like it was wired perfectly by a CNC machine. It takes a LOT of extra time to make it look pretty :)

  • @ddaniels2901dd

    @ddaniels2901dd

    4 жыл бұрын

    You said HANDS, you must be a fellow IBEW member.

  • @lunchboxproductions1183

    @lunchboxproductions1183

    4 жыл бұрын

    @@chadcoady9025 That's probably one of the better rationalizations for being a hack I've heard so far.

  • @jonathonspenceley3552

    @jonathonspenceley3552

    Жыл бұрын

    Awesome Job!

  • @RT-rh1ws
    @RT-rh1ws9 жыл бұрын

    Thank you for posting this video. Your emphasis on safety is very well done. With electricity, you just can't be too careful. Also, the wiring you installed in both panels is superbly laid out and well organized. That makes it very easy to trace. Although you say that you're not an electrician (neither am I), your work is much better than most electrician's work I've seen. I'm looking forward to watching more of your videos. Keep up the good work!

  • @GotItMade

    @GotItMade

    9 жыл бұрын

    Richard Terzi Thank you for the kind words, Richard. I appreciate you taking a minute to share them with me.

  • @richscafe9851
    @richscafe98515 жыл бұрын

    This has got to be the best explanatory video on how to wire a sub-panel that I've come across on KZread. I wired a sub-panel about 7 years ago and need to do another one but needed some refresher as I am not an electrician and you provided me with the clarity I was looking for. Thank you for keeping this video up. Excellent work.

  • @garyme7201
    @garyme72017 жыл бұрын

    After looking in my existing panel, I am blown away at how clean and neat yours is.

  • @tvfrance3667
    @tvfrance36676 жыл бұрын

    Great video, love your down to earth explanation and assuring manner.

  • @earthdog1961
    @earthdog19616 жыл бұрын

    I like your thinking! Anything is possible today with a little effort and some dedication ( and of course the right KZread channel). Good on you Bro!

  • @bryanhikes
    @bryanhikes6 жыл бұрын

    Thank you for helping me wire my subpanel. I took your advice and spoke with my local Tennessee inspector about what he wanted before he came out. The inspector was great. The piece of mind after getting an inspection was well worth the $40 permit.

  • @mrzfunk
    @mrzfunk8 жыл бұрын

    What a great instructor! Clear and concise and great video editing.

  • @craigslaunwhite579
    @craigslaunwhite5798 жыл бұрын

    Scary tab. the one that makes you feel alive and dead at the same time. love that line. also the wooden pointer is a great safe way to show things.

  • @edlindquist8784

    @edlindquist8784

    6 жыл бұрын

    yup, laughed out loud at that

  • @refusoagaino6824

    @refusoagaino6824

    6 жыл бұрын

    We used to use wooden poles to push dynamite into the holes, but they sharpened like pencils too quickly so they started sending us plastic covered loading sticks. Not much better. Low voltage electric blasting, no sparks please. In fact, all metal has to be non-sparking aluminum, copper or wood when near the (rock) face.

  • @Liberallez

    @Liberallez

    5 жыл бұрын

    @Vin Vin Did you miss the part where he said the MAINS ARE STILL HOT...?!?!?!?!

  • @refusoagaino6824

    @refusoagaino6824

    5 жыл бұрын

    When I worked as a drift miner in the '70s, we used non-sparking or conducting hand tools, near the face when we were loading. $4.84 hour from a company called Texasgulf. That was in N. Ontario, Timmins.

  • @brandont4545
    @brandont45456 жыл бұрын

    Thanks for sharing this! That looks great man. Im a 4 year apprentice and i have seen journeymen not do work this good. Very nice man

  • @williamblum8104
    @williamblum81042 жыл бұрын

    The panel wiring looks like you took your time and dressed everything properly. Best looking panel I've seen in the last 60 yrs! Excellent presentation, easy to understand for laymen. Great out-takes,

  • @thefamilycircuss
    @thefamilycircuss4 жыл бұрын

    "Oriented" and "Mashed", I appreciate the fore thought that you give to your work and words. Thanks for this detailed demo.

  • @Gimbal
    @Gimbal9 жыл бұрын

    Excellent video. Thanks for taking the time to show all the fiddly little parts to make it all fit.

  • @douglasflandermeyer1659
    @douglasflandermeyer16595 жыл бұрын

    As an electrical contractor, I appreciate your attention to detail, preparation, and common sense. An experienced electrician would have either upgraded the main panel, drilled a hole in the back , and put subpanel outside, or flush mounted the sub with a nipple through the stud, next to existing panel. If you ever do this again, a piece of romex, with a connector in the panel, and one in your junction box would have been legal.

  • @sethtaylor5938

    @sethtaylor5938

    3 жыл бұрын

    I also commented in a separate posting that NEC requires all current carrying conductors be in a *continuous* raceway. Another approach may have been to use a piece of Greenfield or liquid tite. ST

  • @adagre

    @adagre

    3 жыл бұрын

    Do you just merret the 2 types of wire together?

  • @grom7826
    @grom78266 жыл бұрын

    I have always pulled permits on my places, resale goes so much smoother that way. I wired an old Studebaker truck and looking at your job in the main and sub panel, I would say you are a perfectionists for sure.

  • @pops9190
    @pops91903 жыл бұрын

    Great clarity in your perspective and thought processes. I do like listening to people like you. Thanks, I now have my DIY subpanel in my garage here in California! Oh, and inspected too. Excellent editing and camera work.

  • @mon6166
    @mon61664 жыл бұрын

    thanks, I like how it sticks to the important stuff and doesn't waste time

  • @Shamegscr
    @Shamegscr6 жыл бұрын

    For someone who's not an electrican your panel is very neat man , good job .

  • @ArcLightAddicts
    @ArcLightAddicts Жыл бұрын

    This is the best subpanel install tutorial I've seen yet. It's to the point, explained well, and provides all the necessary information required to perform this task. PERFECT and thank you sir!

  • @pld8993

    @pld8993

    Жыл бұрын

    Other than the blatant and dangerous code violation where he fishes individual conductors through the wall without conduit....

  • @ArcLightAddicts

    @ArcLightAddicts

    Жыл бұрын

    @@pld8993 If the line is dead it doesn't matter. Also, it's not code to have romex in conduit in wall.

  • @pld8993

    @pld8993

    Жыл бұрын

    @@ArcLightAddicts If you think it's the best sub panel tutorial you've ever seen, then you obviously don't know how it's supposed to be done properly. If there's a load on the sub panel the line isn't dead, so It does matter that he installed individual conductors in a wall cavity. Blatant code violation and an amateur move that no real electrician would ever do. While it makes no sense to put Romex in conduit in the wall, you're wrong, there's no code that says Romex cannot be in conduit in wall.

  • @kenkre1212
    @kenkre12125 жыл бұрын

    Agree with Ian. I have installed a subpanel in my shop and wish I had this before I did the work. Nice job. Thanks

  • @daveoverbey2032
    @daveoverbey20326 жыл бұрын

    Yeah' I really like the way your neat & precise & the way you produced it was excellent. Thanks for your info & knowledge.

  • @danwitherow9708
    @danwitherow97088 жыл бұрын

    I can't believe how meticulously neat that panel was!

  • @GotItMade

    @GotItMade

    8 жыл бұрын

    Thanks Dan

  • @iratodd8867

    @iratodd8867

    7 жыл бұрын

    blazingnailgun i am osha10 certified in electrical and safety so i can wire your whole house without worries and make sure it is done right and neat because im 17 and taking electrical in votec at my school and am already wiring a house that is just a frame right now and it is fun and easy because i am wiring it with my classmates

  • @BlastReadingSeries

    @BlastReadingSeries

    7 жыл бұрын

    For real, it's kind of beautiful!

  • @texasjourneyman207

    @texasjourneyman207

    7 жыл бұрын

    ira todd no you can't wire it because ur not a journeyman electrician and u don't have a master electrician with a contracting license and I'm also pretty positive that you couldn't explain grounding and bonding and with out those main principles it would be a very unsafe and illegal house

  • @iratodd8867

    @iratodd8867

    7 жыл бұрын

    derek rodano i am in votec and am wiring a house in school now fyi

  • @jefflewis9675
    @jefflewis96755 жыл бұрын

    Not many 15+ minute videos I'd watch, but I enjoyed every moment of yours! Your explanation was excellent and your work seemed as professional as any. Loved the out takes at the end!

  • @1240jamal
    @1240jamal4 жыл бұрын

    Great job explaining this really practical project. This is the most helpful subpanel video I could find. Thanks for being so detailed in your description process.

  • @jowpopper790
    @jowpopper7908 жыл бұрын

    You may not be an electrician, but this was the most informative video I've watched. Keep up the good work.

  • @GotItMade

    @GotItMade

    8 жыл бұрын

    +jow popper Thanks for watching and for the encouragement. I really appreciate it!

  • @ricmiddletown7685
    @ricmiddletown76856 жыл бұрын

    i have paid professionals that did not have such a clean install of a panel box. awesome work.

  • @bandospooky
    @bandospooky6 жыл бұрын

    Nice job, man. Good to see you being safe with all that. Thanks for posting the video.

  • @ronhenley7197
    @ronhenley71976 жыл бұрын

    This video is GREAT! It reinforced what I already know and a couple things I wasn't sure about. I like the way he explains in simple easy to understand English. Thanks....

  • @christys1955
    @christys19554 жыл бұрын

    We so enjoyed your video, especially the comment: "Makes you feel alive and dead at the same time!" You did an excellent job on all the aspects of the project! We liked your end of your video showing the bloopers too! :)

  • @jimmysegovia2688
    @jimmysegovia26888 жыл бұрын

    wow sweeeet job man I love it!!! very meticulously done the way I like to do thing's!!!

  • @Jake-tt6mk
    @Jake-tt6mk3 жыл бұрын

    I`m from Waycross Georgia, spent my summers on my grandpa's farm there ...and from my dad on up, they all had those great little one-liners! "So dark, you can sleep with your eye`s open!", and the like. Appreciate the video, and your sincere delivery ...something we could all use more of today! Best to you and yours!

  • @gordonmercer6742
    @gordonmercer67428 жыл бұрын

    This is gold. We just had a pole building built and its time for the electric. After calling electricians for a quote, I will be doing my own. I just hope my inspector is as helpfull as your's. thank you, Gordon Mercer, Spearfish, SD

  • @kelly806
    @kelly8069 жыл бұрын

    Great video. I do my own electrical stunts too...and I'm not an electrician. You're right though...do the research, be careful and you can do near anything electrical in your own house.

  • @cassumabdulai3210

    @cassumabdulai3210

    3 жыл бұрын

    You should know what you're doing Lire neutral & earth grand bar earthrod

  • @twg6669
    @twg66695 жыл бұрын

    Your accent is awesome and very soothing. Thanks for the info!

  • @elbertj9777
    @elbertj97774 жыл бұрын

    Excellent video. Very thorough explanation on adding a subpanel. It gave me the confidence to install a subpanel next to my main breaker box. Wish me luck!

  • @ACT189
    @ACT1897 жыл бұрын

    Impressive and neat wiring! Thanks for a great video and clear explanation. I'm doing a shed and this is extremely helpful even if I hire an electrician!

  • @Mrcaffinebean
    @Mrcaffinebean7 жыл бұрын

    "I'm not an electrician but I ain't afraid to fool with it." I think I'll use that quote lol.

  • @RayleighCriterion

    @RayleighCriterion

    3 жыл бұрын

    I'm not a gynecologist, but I'll take a look.

  • @MrVampiro82

    @MrVampiro82

    2 жыл бұрын

    @@RayleighCriterion 😂😂😂😂😂😂😂😂

  • @wilassguess
    @wilassguess4 жыл бұрын

    Good video and well articulated southern accent. Appreciate you....

  • @flynnblu6992
    @flynnblu69922 жыл бұрын

    Dude, this is perfection. About to run 2-2-2-4 AL SER cable to a 100A panel in my attached garage and this is just what I needed. Thanks!

  • @ezseeker
    @ezseeker5 жыл бұрын

    This video is one that a person can actually follow. Thanks a lot for your great visual demonstration and clear voice in your explanation.

  • @DanielA-vi3ud
    @DanielA-vi3ud6 жыл бұрын

    Good instruction and good videography. Thanks!!

  • @garypayne423
    @garypayne4234 жыл бұрын

    Hell yeah bro, can tell your a good ol boy, godd bless you brother great job on those panels

  • @ericnelson294
    @ericnelson2948 жыл бұрын

    Very well done. I also liked how neat and organized the wiring in your panel was.

  • @GotItMade

    @GotItMade

    8 жыл бұрын

    +Eric Nelson I believe it was birch.

  • @daddydawg1902
    @daddydawg19029 жыл бұрын

    Thanks for the video. Very clear, concise instructions. I also like the consult you did with the inspector prior to the job... Makes a lot of sense. I'm not an electrician ither but have done and will do some simpler jobs soon. These videos by folks like yourself help save a TON of grief and rework. Thanks again.

  • @GotItMade

    @GotItMade

    9 жыл бұрын

    Wrath Claw Thanks for the kind words and encouragement, Wrath. Glad the video helped out!

  • @stringfellowhawk4843
    @stringfellowhawk48436 жыл бұрын

    Probably one of the best instructionals on this ever! Hate to say it but I thought the accent by Larry the Cable Guy was fake but you talk just like him in real life. LOL. I love it dude. You should make more tutorials. How about one running a wire underground from a garage to a shed. That would be awesome.

  • @YakMotley
    @YakMotley5 жыл бұрын

    Awesome video ! Thanks!

  • @cassumabdulai3210

    @cassumabdulai3210

    3 жыл бұрын

    I am appreciated your video shows His carefully !

  • @klarman555
    @klarman5555 жыл бұрын

    I like the way you explain everything and your tidy electrical panel. Well done! Especially like the outtakes!

  • @mikeflores996
    @mikeflores9962 жыл бұрын

    Thinking of adding a sub panel in my garage only because the wiring was not done properly ( three wires overhead) going to trench it from the main panel. I’ve looked at many videos on how to proceed, your video has given me more confidence on tackling it myself! Thank you for posting!

  • @williamneilambrosini1334
    @williamneilambrosini13345 жыл бұрын

    You are a gifted and cool soul. I wish we could hang out.

  • @sellakc
    @sellakc7 жыл бұрын

    Great and very neat work. A couple of issues to watch, though. My comments are meant to be helpful, and not critical. The NEC requires a conduit system to be completely installed. The big hole in the back of the box would be a code violation, since the conduit system is not complete. Great job on the separating of neutral and ground - this is often violated. I would ensure the wires are torqued properly per the manufacturer listing, especially with aluminum. I have investigated several fires that were caused by improperly torqued aluminum conductors. Too tight can be just as bad as too loose - one damages the wiring and one creates arcing under the terminal. Great job with the comment on the rust inhibitor - typically electricians use something like NOALOX by Ideal or something similar (many brands of this). The 100 amp breaker, although it fits, can sometimes violate the max breaker size in the cabinet allowed by the manufacturer. Usually this is stamped on the inside of the breaker cabinet - something like MAX C/B SIZE 75A, etc. Some panels will max out at 60 amps, some at 75 amps, as high as 120 amps. Square D QO is a good series to use - better quality than the Homeline Series by the same company. Always check this for max load circuit breaker size. Some comments have been made about wire ampacity and usign 90 degree C wire ampacity. 90 degree C rated wiring in a typical panel cannot be loaded to that amperage, because the limiting factor is the terminal rating. Most home breaker panels are limited to either 60 degrees or 75 degrees C, so if you are using the NEC to determine wire size and max amps, you have to follow whatever the terminals on the circuit breaker (both supply and load end) and limit your amps to that amount. Again, great job with your neat install - better than many electricians' work I've inspected.

  • @MR-nl8xr

    @MR-nl8xr

    7 жыл бұрын

    Kenneth. good comment.

  • @jmequineservices4766

    @jmequineservices4766

    7 жыл бұрын

    If you "inspected" any work and allowed those conductors to fish in a wall like that... you need your ticket pulled.

  • @sellakc

    @sellakc

    7 жыл бұрын

    J/M Equine Services No one said I would have passed this whatsoever. Perhaps you didn't read the lengthy suggestions above, including not allowing wires to be installed unless in a complete conduit system. I was attempting to be cordial and point out code compliance issues, not be a jerk and make comments like yours. This helps no one, in my opinion. Had this been an inspection, I would have not approved it until corrected, and I have seen so-called licensed electricians do much worse than this.

  • @caligulathegod

    @caligulathegod

    7 жыл бұрын

    I was wondering about that myself. BTW, J/M wasn't talking about you, he meant a general inspector should not have approved that. He was just using the generic "you."

  • @Sparky-ce9yy

    @Sparky-ce9yy

    6 жыл бұрын

    Kenneth Sellars it passed inspection

  • @dgehringer
    @dgehringer5 жыл бұрын

    Great Video. Exactly what I needed to see to install a subpanel in our motor home. Thanks for being so detailed.

  • @joealessandrini9752
    @joealessandrini97526 жыл бұрын

    Great video and instructions. I just installed the same sub panel and it worked out perfectly. Thanks again.

  • @javiergalvan6026
    @javiergalvan60268 жыл бұрын

    "Make you feel alive and dead at the same time " 😂😂😂

  • @lamboiah

    @lamboiah

    5 жыл бұрын

    😃

  • @craigslaunwhite579

    @craigslaunwhite579

    4 жыл бұрын

    Yeah Electricity seems so peaceful when no touches it. And then the alive can become dead

  • @Lanceb131

    @Lanceb131

    4 жыл бұрын

    EXACTLY what I was going to comment! This guy is funny IMO. Lol

  • @Sandburn58

    @Sandburn58

    4 жыл бұрын

    Sort of like Schrödinger's cat huh?

  • @mikez4132

    @mikez4132

    4 жыл бұрын

    Funny sh*t lol

  • @d34thztorm
    @d34thztorm6 жыл бұрын

    Hahah Love the end!!! great video man!!

  • @frankmarkham8664
    @frankmarkham86646 жыл бұрын

    Great job, clear example for my next electrical project. I too, need more circuits for a personal wood working shop.

  • @brittanythompson4366
    @brittanythompson43663 жыл бұрын

    I appreciated that you explained even the simplest parts of this installation.

  • @damienkinchen
    @damienkinchen7 жыл бұрын

    "just hush I don't want to hear it" I love it lol

  • @DavidRobinson-cy8hj
    @DavidRobinson-cy8hj8 жыл бұрын

    Damn good instruction! Hell of a DIYer!

  • @GotItMade

    @GotItMade

    8 жыл бұрын

    +David Robinson Thanks!!!!!

  • @kodzo02

    @kodzo02

    7 жыл бұрын

    David Robinson jjss dos

  • @kodzo02

    @kodzo02

    7 жыл бұрын

    blazingnailgun weeo

  • @kodzo02

    @kodzo02

    7 жыл бұрын

    blazingnailgun is wwww

  • @kodzo02

    @kodzo02

    7 жыл бұрын

    blazingnailgun fde

  • @1724nine
    @1724nine8 жыл бұрын

    Hey I just wanted to thank you for the knowledge and confidence you've given me. This video was just what i needed. I followed all codes. I called inspector in washington state and just like you said aluminum is totally fine. Thanks so much for all the advice. Today i installed a 240 direct wire forced air heater from my garage rafters. It kept me warm so i could work on my 1968 f100. Thanks again.

  • @GotItMade

    @GotItMade

    8 жыл бұрын

    +Billy Davis Great compliments, Billy. I appreciate it!

  • @wagnergitirana
    @wagnergitirana4 жыл бұрын

    This man is very smart and his ideas are great. Thank you for this video, it helped me a lot with my electrical projects.

  • @larrylemoine3687
    @larrylemoine36876 жыл бұрын

    You did a nice job. It's all correct, and I would think you were a trained and licensed electrician just like me. A+++ man!

  • @Uhlan_
    @Uhlan_8 жыл бұрын

    Had to watch it twice. The first time I got to "that shiny bit that makes you feel alive and dead at the same time" and had to start over.

  • @cmdr_scotty
    @cmdr_scotty5 жыл бұрын

    thank you so much for making this video. my home has a pretty badly set up breaker and subpanel that's showing age and lack of inspection. This has given me some ideas on how best to remedy it.

  • @critterallywithjohnernest.
    @critterallywithjohnernest.5 жыл бұрын

    For not being an electrician you do an awesome job my friend. Very professional and eye pleasing as well. Nothing worse than opening up a panel to see a spider's nest of wires. Job well done!

  • @losnex1
    @losnex16 жыл бұрын

    “That shiny part that makes you feel alive and dead at the same time” lol

  • @GotItMade

    @GotItMade

    6 жыл бұрын

    Hahaha

  • @bryanhk1982
    @bryanhk19827 жыл бұрын

    bloopers at the end *Two thumps up* good stuff

  • @lowell49
    @lowell495 жыл бұрын

    Very professional. Done electric for 40 years. You are better than most!

  • @orvillen.bignall3619
    @orvillen.bignall36198 жыл бұрын

    I am very grateful for your timely explanation. Your work is high quality.

  • @marknichols7861
    @marknichols78617 жыл бұрын

    "...Feeling alive and dead all at the same time..." Classic!

  • @timfalardeau9753
    @timfalardeau97536 жыл бұрын

    "Make ya feel alive and dead all at the same time" --- LOL

  • @nathanhollis8496

    @nathanhollis8496

    2 жыл бұрын

    Quote of the day!!!

  • @vut9690
    @vut96902 жыл бұрын

    I was preparing to install a subpanel and your video was helping me get my work done. Thanks!

  • @MrDragonUTube
    @MrDragonUTube2 жыл бұрын

    Thanks for the helpful video that you made. I installed a 100 amp subpanel over the weekend and it came out really good.

  • @donniebrown2896
    @donniebrown28966 жыл бұрын

    Love the out takes! Lol

  • @johnfuller6212
    @johnfuller62126 жыл бұрын

    very nice, love the bloopers at the end. lol

  • @TheDesmoMan2012
    @TheDesmoMan20126 жыл бұрын

    Man I like the way you are so precise and explain all things, this is really good stuff for us DIY'ers! Thanks!

  • @Rspri10104
    @Rspri101045 жыл бұрын

    Good video. I just built myself a 24x24 un attached garage. Now I need to wire it up and your video has good info thanks for sharing.

  • @doctorwork
    @doctorwork9 жыл бұрын

    I put some electrical tape over the main lugs in my panel just to make it that much harder to accidentally touch something that is hot when I'm working with the cover off.

  • @surgeesquivez1140
    @surgeesquivez11407 жыл бұрын

    great video thanks....!!!!

  • @georgemoomaw9437
    @georgemoomaw94372 жыл бұрын

    Great video. You gave me a lot of good advice. I did not intend to pull a permit. You changed my mind on that. Best description ever on the feeling of an electrical shock - “makes you feel alive and dead all at the same time.” Both my wife and I had a good laugh over that!! Thanks

  • @jusfucksingmeupG
    @jusfucksingmeupG8 жыл бұрын

    Thank you so much for this video you made. Being a newbie to installing electrical panel, it helped me so much in getting my sub panel installed and passing inspection. Again thanks for sharing.

  • @troysgarage
    @troysgarage6 жыл бұрын

    "Alive and dead all at the same time" - I love it!!!! hahaha

  • @AusJackal
    @AusJackal7 жыл бұрын

    nice job. You can tell a sparky didn't wire that panel... it's super tidy... ;-)

  • @borisb1831

    @borisb1831

    6 жыл бұрын

    a sparky?

  • @TheMrFrugal

    @TheMrFrugal

    6 жыл бұрын

    Sparky=Electrician

  • @neilmontgomery6144

    @neilmontgomery6144

    6 жыл бұрын

    Boris Navy background?

  • @refusoagaino6824

    @refusoagaino6824

    6 жыл бұрын

    No kidding.

  • @mikefroi3520
    @mikefroi35206 жыл бұрын

    love to see those wires on the main panel. well arranged and very neat.

  • @TheBudgetMindedMotorist
    @TheBudgetMindedMotorist6 жыл бұрын

    Man, I loved the outtakes at the end. Makes me feel better knowing I'm not the only KZreadr with moments like that. Thanks for the video, it was very informative!

  • @GotItMade

    @GotItMade

    6 жыл бұрын

    Hahaha.

  • @awesome6486
    @awesome64868 жыл бұрын

    Hello, can you explain what you did when you ran the wires through the back of the box to the bottom of panel? what fitting did you use between the panel and back of box? you never showed this part... open wiring inside wall is 100% illegal, obviously... so what type of raceway method was used inside wall ...please expain

  • @tonylopez9936

    @tonylopez9936

    6 жыл бұрын

    I don't know where you get "obvious" or "100% illegal". Is the wiring behind all YOUR drywall set in conduit? Please tell me where you live so as not to build there. California is unreasonably tough on building codes & conduit behind drywall is not required. Therefore, something else IS obvious, and "the bell tolls for thee"!

  • @deankay4434

    @deankay4434

    5 жыл бұрын

    In Omaha, wiring inside the wall requires proper staples in correct locations, nail plates on studs where wire passes thru, covered with drywall or plywood is acceptable. Don't attack the guy because you want to be heard, making you obviously smarter than someone who pulled a permit and did it himself, who told you he is not a "Licensed" electrician to begin with. Does that make you 99% obviously obnoxious ? Now, if you want to quote the chapter, page and rule from the NEC book regarding the use of non romex type of wiring, inside a wall, go ahead. I did not see that info in your finger-wagging rant. I looked but did not find your brilliant video on this installation. The dude did more to advance the DIY'ers and some "Licensed" electricians currently working. My house, built in the 80's was inspected and passed, but guess what? The inspector & the electrician are human. Why? My door bell did not work according to my wife, but it did. After trying to reproduce the complaint, it failed. They wired the 24 volt transformer to the furnace switch box, but hook into the blower fan for power because to many connector for the box size. So, it worked as long as the furnace received a call for heat or cooling and the circulation fan came on. There is always going be someone who is smarter, knows more or quicker at their job than you. So, explain why Nicholas Tesla is not on the $100 dollar bill rather than Ben Franklin. Neither where president, but unlike you, they had many who respected and admired their work. Retired ASE Master tech for over 30+ years.

  • @LiveInTheNow247
    @LiveInTheNow2477 жыл бұрын

    you didn't show the video of the actual wiring

  • @melcase8153
    @melcase81534 жыл бұрын

    just starting the electrical phase after building a small 8 x 10 shed. I do have a small advantage, my neighbor is an electrical engineer and his father and brother. I am blessed occasionally, but I want to do it myself and he will be my inspector. Great video, Thank you

  • @pnolans
    @pnolans6 жыл бұрын

    Thanks, I learned a lot from watching this, not just how to wire a sub-panel. I'm a newbie at all of the options I can buy in the electrical department, and you showed me to how use a lot of them. I like the way you approach doing things, and as someone else says, you're work is very neat. Thanks.

  • @GotItMade

    @GotItMade

    6 жыл бұрын

    Glad it helped out!

  • @markgiltner7358

    @markgiltner7358

    6 жыл бұрын

    don't let yourself get freaked out by all the different kinds of breakers and different wires. your service box is stamped with the manufacturer name that's all you need to know as far as what breakers to get. as far as working goes just learn what your local and state codes are. 110 and 220 are easy to install, but bear in mind 110 will tickle you a bit but can knock you on your ass. 220 can kill you, not to say 110 can't but less likely. it's not volts that will kill you per say. it's amps that will kill you, good luck with your new hobby

Келесі