this is literally the only video i could find showcasing this thankyou

thank you, the one person that can show the 2 molex pins into 1 8 pin connector, makes sense how it works now.

@k-nemo

2 жыл бұрын

Great, thanks for watching

@promovies9355

9 ай бұрын

@@k-nemo i have 450 watt psu which has 2x moles pins can i use them to connect my gtx 1060 6gb with 2x 3pin molex to 6 pin pcie adapter. please tell me

@WholsTom

9 ай бұрын

@@promovies9355 you need a better psu for that

@pichu2806

7 ай бұрын

​@@promovies9355do you do that?

@vegetasama7963

6 ай бұрын

​@@promovies9355did u do it?

Lmao, when that molex pin fell out - I felt that... Molex is so crap 🤣

@k-nemo

3 жыл бұрын

It's only a temporary solution

@monteiro1993

3 жыл бұрын

@@k-nemo Using that exact 2x molex to PCI-E adapter you used, could I fulfill a third 8 pin connector on an Asus Strix 3080 safely? (The other 2 8 pins will be single 8 pin PCI-E cables from the 2 VGA ports on my PSU) P.S : It's a 750w PSU

danke man du hast mir echt geholfen, dachte man braucht unbedingt einen 8pin stecker aber ich sehe gerade du hast 1mal den 6pin stecker genommen und denn 2 pin stecker und das geht also auch , danke like und abo sind da. kuss

Hey man I have a question. Can you test the small 2 pin pcie cable if it shows voltage? Or resistance or anything like that. When I put in a Multimeter into both the pins i dont have any current. Great Vid!

Cara, você foi o único que conseguiu tirar minha dúvida. Muito obrigado!!!!!! Já deixei meu like!!!

@k-nemo

8 ай бұрын

Obrigado por assistir e deixar um comentário legal

Hey Man can i ask what type of psu you use at the videocard at the end?

if you are here and don't have 6/8 pins in gpu, don't worry low gpu's does not have pins to connect to psu as pcie slot itself provides the power.

@risingrefill

10 ай бұрын

yep

@kfyaspace987

10 ай бұрын

Yeah this is me, my problem is that I am upgrading my gpu and my old gpu didn’t need any cables. However, my new gpu needs a 6 pin adapter but there isn’t already one in the pc since my old one didn’t need it (i bought a prebuilt). Do u know what i am supposed to do??

@tae60fps77

9 ай бұрын

@@kfyaspace987any updates I have the same exact issue

@ahmedben5988

9 ай бұрын

​@@kfyaspace987the only options are either buy a new power supply or use the dual molex to 6 pin adapter

@daddurs2206

9 ай бұрын

@@kfyaspace987same here! Can’t figure it out

Thank you for information ❤

@k-nemo

3 ай бұрын

My pleasure 😊

thank you for the video, you got a new subscriber!

@k-nemo

3 жыл бұрын

Awesome, thank you!

I have a 480w psu with only one pci-e Can I use the adapter to run rtx 3060 ti, or at least with limit?

Hi, so my gpu has 2x6pin as the 1st or 2nd gpu in your video, but my psu has 8pin cable, how can i find the adapter and where, pls help i can't find it on internet :c

Cara, valeu em, tava com a dúvida e você foi o único que ajudou kkkkj obrigado viu!

Hey! One question, i have a MSI GTX 1650 Aero ITX that needs a 6 pin power connector, but i dont have the power connector and i am planning to buy an adapter like this, my psu has 500w and the minimum amount for the graphics card is 300w (the graphics card only uses 75w). How long should i use this adapter until i upgrade my psu? (upgrading my psu will be hard because i never built a pc before,but i think i have decent knowledge of pc tech)

@pacif3rbolte

Жыл бұрын

Bro You can go with this connector it's perfect as the pcie express slot itselft provides 75 w of power and it only consumes 75w power so you are safe to go even in long term and your psu is also fine for this gpu

@Dev5un

Жыл бұрын

A 75W gpu is not even supposed to have pin connectors , only a few has .

@syncxt295

11 ай бұрын

@@pacif3rbolte yo beo i go a question i bought a gtx 660 it has psu power slot but do i need to connect to the external psu power cable or can i just connect staright to the motherboard and will it work

Kann man für eine Grafikkarte einen Adapter mit von 6 auf 8 Pin verwenden? Oder erschießt man damit die Grafikkarte? Die Grafikkarte (GTX 1660 hat 8 Pin und das Kabel vom Netzwerk leider nur 6 Pin. An dem Kabel mit den 6 Pin ist noch ein Nebenkabel mit 2 Pin angebunden…. Ist das für eine Grafikkarte mit 8 Pin vorgesehen?

Do those piggytail half the power of the pcie like 75 to the one and 75 to to the other one? Then what if my gpu has only 8pin slot then it only uses 75 watts. Please answer me thanks

I have 450W psu and i planning to get GTS450, is it safe to use the 2 molex to 6 pin ??

What a coincidence that 6870 is my old card and the 1660 is actually my new one Who knew

My gtx 960 requires a 6pin which is connected to a 6pin to 2x4pin molex adapter. The problem is that my 4pin molex connects right into my Mainboard and not psu. Would that still work?

Спасибо, помогло

I have only one molex cable fron my PSU, can i plug in the 2 molex to 6 pins adapter to the same "line" of molex? Or it has to be in a separate line from the PSU? I mean, i have 2 molex but in series, from the same cable.

@maxgameg6303

3 ай бұрын

Had it worked?

Hey I just bought a rx 6500xt but I don't have a external power cord.Any suggestions? I have a p450B psu

Thanks

Where do i find the vga cables in my pc

Hello, I have a loose 2 pin and two 6 pin. One 6 pin is installed at my current GPU. Im upgrading to a new GPU which has 8 pins. Is it safe to plug the loose 6pin and 2pin in the 8 pin socket? Also the 6 pin one which is linked to the current GPU has all the cables colored black but the loose 6 pin one has the cables in different colors (Brown, black, white etc.), are both 6 pin PCI-E the same or they differ?

@k-nemo

3 жыл бұрын

Compare the shape of pins 1:56

Bro i have gtx 1650 i have found that gtx 1650 is 75 wattage gpu but gigabyte new rev 3.0 gtx 1650 have 8pin pci express.... so my question is can i use dual molex to 8pin pci e adapter ?????😢😢

Bro my gold pins in the left side cant go all the way inside but when i turn the pc on the gpu work . But still the gold pins not all the way down . So how can i fix it and btw i tried to push it inside but doesnt work !...

This comment may be offtopic from this video but, i have a graphics card with 16x pcie pin socket, but my 750w psu only has 14x pcie pin socket. Will it work with the new graphics card?

@k-nemo

3 жыл бұрын

PCIe is the name of the data connector. The PSU has power connectors. You need to compare the power socket on the graphics card with the plug from the PSU

Very good 👍😊👏

@k-nemo

2 жыл бұрын

Thank you very much

@tonnylopes6831

2 жыл бұрын

I'm Brazilian and I love your channel, thanks for everything you teach us :)

not a big fan of "speechless" vids as a rule, but thank you for showing the grace & good breeding to use a pleasant & somewhat neutral music track instead of bombing your audience with obnoxious rap/hiphop. It really increased the viewability factor by leaps & bounds.

@k-nemo

2 жыл бұрын

Thanks for watching and leaving a lovely comment.

i have a question. I have a 400w sfx psu but she didnt come with 6+2 pci pin, its safe to use 2 molex to 6+2 connectors? my setup is i3 12100(65w),RX 6600( is consuming 105w in games).

@Gstvcvlhr

Жыл бұрын

Acho que não tem problema

Nice video! I have a question, I've bought a gtx 1650 (75w), I ordered the one without the 6pin connector but I received the one with it, my psu is 300w and it doesn't have the 6pin but only the 2 molex, is it safe for such a wattage to use the adapter?

@k-nemo

3 жыл бұрын

Make sure 300W is not too little? The bigger, newer power supply will have different connectors.

@nier576

3 жыл бұрын

@@k-nemo As for the whole wattage my psu can run the gpu and everything I have, simply I know that it's usually not suggested to use the adapter so Idk if it's better to buy the adapter or return the gpu

@JNY_32

3 жыл бұрын

@@nier576 Im having the same Dilemma right now. Can I ask what did you do?

@nier576

3 жыл бұрын

@@JNY_32 I used the 6pin 2 molex and it works perfectly, because the motherboard can stand already 75w so if your gpu is the same I have, or one that uses not much more than 75w it will work, just be sure that the psu has enough power for your gpu and use a 2molex and not 1molex because it will split the wattage between the two cables so it's safer

@JNY_32

3 жыл бұрын

@@nier576 My PSU is also 300w and the GPU I ordered needs 75w ( also a 1650). The adapter I was looking to get has 2 molex to 1 6pin PCIe. I'm just afraid that the adapter turns out to be flammable

Hi guys, please let me know- Does Molex to 6pin Y splitter(2 molex port to single 6pin) works with GTX 1650? (It requires max. 90W and I have 450w psu)

Im late lol but would 2x molex to 8pin be ok for rx 480? I have a 560w psu.

where can i find the adapter that you put an the last card ? and can put in my rx 570

@k-nemo

3 жыл бұрын

I bought mine on British ebay

i have 2 x 6 pins so, can i use 2 x 6pins to 8pin cable for my rx 580 8gb? and is it safe ? i have a antec truepower trio 550w psu

@DJPatrickHarris

Жыл бұрын

I have the same problem because of my 2x6 pin and I buy a GTX 1070 1x8 pin only I ordered adapter but I don't know it's safe or not 😬

Like I tell my son, use your words!!

@k-nemo

Жыл бұрын

Thanks for advice :)

E quando tem dois q sai do mesmo cabo pode coloca o adaptador tbm

Very Good Video!!! But I have a question. My GPU uses TWO 6 pins but my PSU only has two Molex. Can I use a TWO single molex to 6 pin for each of the 6 pins?

@camw9354

2 жыл бұрын

yep

@k-nemo

2 жыл бұрын

Thanks for a comment

isso daria algum problema tenho uma Fonte de Alimentação ATX Nox Urano SX 500W 80?

Does a ryzen 5 pro come with a pci e cable? Cause i cant find mine

thanks man

@k-nemo

2 жыл бұрын

No problem!

Is it safe to use two molexes to power up a 6pin pcie to gpu? My psu is a generic 750W psu and it has 2 free molex cables

@k-nemo

3 жыл бұрын

An adapter is not an ideal solution. I wrote in the description.

@gabrielostrowsky483

3 жыл бұрын

@@k-nemo what description? '¿Una solucion buena?', a eso te referis como descripcion?

Does the gpu pin shape matter? Please someone help

can i use atx 12v cpu 8 pin to graphic card ? or need adapter 8pin to pcie 6+2 and molex to 6+2? still confuse wire

@zadrox8821

3 ай бұрын

Am asking this question too

Bro, I have an Omega ax800.n 800w power supply and I want to use my RX 570, can I bought this adapter?

IMPORTANT In the moment with u install the molex to 8 pin, start to Saving money for new power supply 80 plus, and very very important making a undervolt in you graphic,for avoid fire in u pc... And 300w is very low capacity, me recommend 500w or more

@k-nemo

Жыл бұрын

I wrote about it in the description of the video. The adapter is usually of low quality.

i had a loose connection in my 6 pin connector thus i had issues with auto off on problem like in the video

Jesus Christ that cable management

@k-nemo

3 жыл бұрын

It needs improvig, but I'm still working on it :)

@gamer777core9

3 жыл бұрын

Ok

Is you have a 2 pins you have to plug in can it be two different cables?

@nightbladefork1068

3 жыл бұрын

So i have a 6 pin but im unsure what slot i plug it into in the power supply

Merci t'ai le bosse

@k-nemo

2 жыл бұрын

De rien

hey, I'm new to PC only been a month since I joined but I have a tv as a monitor on my wall (less expensive than a real monitor) could you still install the card without buying other components?

@koagulasepositiv

10 ай бұрын

Yes. No problem. Use HDMI to connect the PC to the TV.

@firestar2274

10 ай бұрын

@@koagulasepositiv i figured it out earlier i meant to edit this comment but i forgot.about this

I have a Raidmax 530ss 80+ and it comes only with 6 + 6 PCI Express. But the GTX 970 requires one 8 + 6. So can I use a molex safely?

@k-nemo

2 жыл бұрын

It should work. Read the description to the video.

@onemetro7987

2 жыл бұрын

@@k-nemo Yeah, it did work. I am using a molex of 8 pins PCI Express for my GTX 970 and it works just fine. My PSU is good enough because its an 80+ bronze Raidmax 530ss. Thank you

I have a question. My power supply doesn't have a cable for the gpu. What are the possible solutions I can do to connect my gpu to the power supply?

@k-nemo

2 жыл бұрын

Change PSU or use adaptor to Molex.

Hey someone plz help I have 450w psu but it has only 6pin and i need 6 and 8 both pins for the rx 580 Should i buy 6 pin female to dual 8 pin males is it safe

Hi. I am planning to install the GPU myself and I can only see 1 molex that I can connect to my GPU. Is this safe with 1 molex connected? 6 pin pcie to 1 molex power cable connecting to 1 female molex from my PSU. It is just one and there no other molex.

@pacif3rbolte

Жыл бұрын

Which GPU is it??

@pacif3rbolte

Жыл бұрын

If it's GTX 1650 or lower then you can go with it but higher than 1650 then DO NOT TAKE THE RISK

Help me, I have a new graphics card that needs 8, and I have a wire in the power supply that only has 6, and when I installed it, the screen was black. Is this because of the graphics card, or is 6 not enough?

@JackSparrow-ww1rx

5 ай бұрын

Hey there. Got any solutions?

@aligames9141

5 ай бұрын

@@JackSparrow-ww1rx Yes . I bought a cable that connects bin 6 to bin 8 🙂

Hello I have an 700watts PSU but it only have 2x molex like in you video, and can it be used on a AMD RX 580?

@pokechardx2362

2 ай бұрын

Did it work?

what is the white slider at 0:24 and at 0:37 ???

What happens if you force the 8 pin down ? And if you dent it will it still work I force mine then I didn't turn it on yet?

@k-nemo

2 жыл бұрын

If it does not fit, do not press, 2:09

What is the cable you connect the molex into

@k-nemo

3 жыл бұрын

power cable adapter

thanks bruuh

i have 450 watt psu which has 2x moles pins can i use them to connect my gtx 1060 6gb with 2x 3pin molex to 6 pin pcie adapter.

@mrknownvalue1882

3 ай бұрын

Yes bro you can

wait. so my graphics card has a 6 pin installation spot. do i just leave the other 6 and 2 pins to the side and only plug one of the 6 pin things in?

@k-nemo

3 жыл бұрын

Yes

ينفع اركب وصلة 6 PIN2 +PIN لكارت شاشة محتاج 6 PIN

Hello, I have an asus s-30fp 300w psu. 288W max. There is no video card power cable in the psu. I bought one HD 6790 and 2 2xmolex to 6 pin cables. Is the psu enough, will the converters cause fire?

@YoSoyGeoffy

Жыл бұрын

In the moment with u install the molex to 8 pin, start to Saving money for new power supply 80 plus, and very very important making a undervolt in you graphic,for avoid fire in u pc... And 300w is very low capacity

@Kloprax

Жыл бұрын

@@YoSoyGeoffy I've already bought a new 600W psu man. I'm using 1080 now.

is this long lasting?

So I just got a gpu that needs an 8pin cable. I have no clue how to get that cable and where to connect it. My PC has the right power and everything. Just not that cable

@RadRoy42

2 жыл бұрын

We bought adapters for my computer

@bigawdays5724

Жыл бұрын

Same, I got everything but the knowledge of where to start and where to end, seems like the tutorials are just for those who already have the cables installed and ready to use. But I don’t.

Moço preciso de uma ajuda sua urgente tem o geito certo de colocar o pino branco ou vc pode colocar de qualquer geito ajuda ?????

is the dual sata adapter to 8 pin is that same as dual molex to 8 pin in terms of power draw !

@trolazoceja

3 жыл бұрын

Yes

bro thats literally my pc case!!

How do I know if the psu supply i want to buy will work with my graphics card?

@k-nemo

3 жыл бұрын

You should ask in the shop or any computer forum which power socket the model you have chosen has.

@allenthomas914

3 жыл бұрын

@@k-nemo what do you mean?

@k-nemo

3 жыл бұрын

@@allenthomas914 Different graphics cards have different commectors. You mast check what connectors you have in PSU supply. Even similar graphics cards can have differents sockets.

@acekhalifa410

3 жыл бұрын

Check the GPU power requirements (watts) at techpowerup.com and make sure it meets the PSU power output (also in watts. It should be written on the PSU itself) For example a GPU with power requirement of 300W will work no problem with, for example, 350 or 400W PSU

@tlfearofthedarkhun387

3 жыл бұрын

Check how much amperage can be delivered on the 12V rail.

So it does work huh i didnt know that

@k-nemo

3 жыл бұрын

It's not the best solution, but sometimes the only one if you don't want to chage PSU at the same time.

Hi my psu is generic atx 700w, is this safe to use?

@k-nemo

3 жыл бұрын

You can check in Power Supply calculator. Adapters are only temporary solutions.

Does it have to be on separate Molex rails? or can it be on the same rail that has multiple Molex connectors?

@mattdudley3789

2 ай бұрын

Molex and Sata usually share a rail. You would want want one from each chain if you could. And this is only sort of safe for cards that draw 120w or less. If it needs 2 8 pins or 2 6 pins, your going to start a fire if you try using 2 of these adapters and 4 molex or sata connections.

@Reiia

2 ай бұрын

@@mattdudley3789 I'm trying to power my Lian Li TL Fans that require a 6 pcie to power the fan connector hub, so i don't think i will be drawing as much as needed for a card. Roughly 60ish W or so if i added them all together... =X So seems like if i just use the molex cable + adaptor 2molex conenctors> 6Pcie power ... it should be safe is what it sounds like since i'm not gonna be pushing it anywhere near that high. (Only reason is my PSU already has 3 used for my GPU and 2 for my CPU/MOBO and there isn't any spares left)

I have a Question. how long temporary use 2molex - 6pin?

@k-nemo

2 жыл бұрын

Until you buy a proper PSU.

is 2 molex to pice safe?

Can I use both moment inputs in the adapter of the same molex relays? Or must i use a separate molec

@gints1199

3 жыл бұрын

it's better to use 2 separate Molex connectors for more power delivery because if you connect that adapter to the same Molex combine cable it would not make any difference like if you connect only one of them. Hope this makes sense.

does the adaptor work with XFX AMD Radeon RX 5700 XT 8GB GDDR6 THICC II Ultra?

@CassiniA312

3 жыл бұрын

Please don't doed that, this is only for gpu with maximum 120w tdp (I know your comment is old, but I write this for if anyone ask the same)

@kioja345

3 жыл бұрын

Definitely NO

Hallo, Von wo hast du den Adapter?

@k-nemo

3 жыл бұрын

eBay

the best video

Guys my psu just 200 watt and i want to upgrade my pc by buying new gpu that is gtx 1650 super that require 6 pin but unforttunaly my psu doesn't have any external power connector so can i use adapter from sata to 6 pin (The gpu draw 100 watt ) So i should fin with it ?

@BeaconluzeXD

14 күн бұрын

Well I Make Sure you To Upgrade Power Supply To 500 Watt With 80+ For Your GPU Be Saved

I'm upgrading from a RTX 2080S to an RTX 3090 and note that the 2080 had an 8 and 6 pin power setup whereas the 3090 has two 8 pin for power. I also know the 3090 has accessory cables (2x 6 to 8 pin adapters). Do I simply use the adapter for one of the existing 6 pins? Thank you

@InitialFailure

3 жыл бұрын

Yes is the answer. I answered it yesterday myself.

@k-nemo

3 жыл бұрын

It's good you've solved the problem. Well done:)

А как сапфир запитывать если в видюхе 6+8 пин, а у меня в бп 2 по 6+2 пина?

Sou muito leigo no assunto quero tirar umas duvidas, eu tenho um pc com ryzen 5 5600g (video integrado) estou pensando em dar um upgrade comprando uma placa de video, eu vi alguns videos sobre e sempre repete o mesmo padrão até ai tudo bem, você encaixa a placa de video coloca os parafusos e o principal conecta um cabo chamado PCIE esse cabo serve pra ligar a placa de video, até ai tudo bem, mas o meu pc ja veio montado e nunca mexi nas peças, fios enfim, eu não sei aonde está esse cabo PCIE e nem sei se veio dentro ou está conectado, como falei sou legio, mas eu reparei que tem um cabo muito parecido na placa mãe, então a minha duvida é todos os pc vem com esse cabo? esse cabo PCIE está conectado na placa mãe?

@The_Traby

6 ай бұрын

hola MATEO soy español espero q entiendas (SI YA DESALMASTE TU PC Y NO VES EL CABLE PCIE ES PORQUE TU FUENTE NO LA TRAE, LO MAS RECOMENDO ES 1-COMPRAR UNA FUENTE DE 750W "SERTIFICADA" "BRONCE" "80PLUS" ETC 2-COMPRAR LA MISMA GRAFICA Q QUIERES, EN FORMATO PQUEÑO "OSEA LOW PROFILE" PROBLEMA RESUERTO MATEO!!

@Mateozzy1

6 ай бұрын

obrigado pela ajuda

My psu doesn’t have the PCIE connector, what should i do if i want to upgrade my gpu to 6 or 8 pins? *btw the psu was 500w

@k-nemo

3 жыл бұрын

PCIE is a connector for the motherboard. Not to PSU.

@nasrulishak5481

3 жыл бұрын

@@k-nemo yeah my psu doesn’t have the cable to connect to graphic card even mine was certified 500w

@k-nemo

3 жыл бұрын

@@nasrulishak5481 Do you have any free Molex?

@nasrulishak5481

3 жыл бұрын

@@k-nemo yeah only one tho

makasih bos infonya

Is it save to use dual molex connector for GTX 1060 3g and it have 6 pin

@k-nemo

Жыл бұрын

Is safe but it is only temporary solution. I wrote in the description.

Dude, you're asking for a fire. An 8 pin gpu power plug can draw up to 150W. Molex cannot handle 150W. Capiche?

@k-nemo

2 жыл бұрын

Need to use 2 x Molex. Adaptor it is not a perfect solution.

@chemicalcabbage

Жыл бұрын

What about 6pin?

@m4rshal469

Жыл бұрын

@@k-nemo 2x molex provide upto 108 bro

@wews2047

Жыл бұрын

@@m4rshal469 75 watts only are the needed wattage because the 75 watts are from the motherboard. But I don't trust this process(adapters) in long term use because this is the leading cause of shorts like in latest rtx 4090.

@REDRAGE343

Жыл бұрын

Bro worry about yourself

Здравствуйте, а можно ли запитать 6 пин от 6+2 пин?

@k-nemo

2 жыл бұрын

Я думаю, что вы можете, если у вас есть 6-контактный штекер

I don't have 6 pin what I have to do

2 molex on 2 rail line right?

@k-nemo

2 жыл бұрын

I'm not sure what you mean

A minha placa e de dois pinos de 6 comprei esse adaptador e nada da imagem por 1 minuto e desliga

Büyük adamsın

@k-nemo

3 жыл бұрын

Thanks

1:20 I have a gt 1030 that doesn’t have any pins what can I do to connect it to a power supply without the pins? Please Help!

@k-nemo

2 жыл бұрын

Nvidia GT1030 does not need any additional power supply. Just plug into PCIe.

@_zenzotic4128

2 жыл бұрын

Oh ok thanks 😊

@breheheh

6 ай бұрын

dummy @@_zenzotic4128

What about 6 pin

@lazarvelickovic1590

2 жыл бұрын

Its same

My gtx 770 have one 8pins and one 6pins can i use the 6pins only??

@k-nemo

Жыл бұрын

No.

Bro I have a gigabyte1650 oc version can I use dual molex to 8 pin adapter my mobo is b450m and psu is 450w

@k-nemo

3 ай бұрын

Check in Power Supply calculator.

@user-qg2pz9uv6w

3 ай бұрын

​@@k-nemobro I was asking if it is safe to use dual molex to 8 pin for gtx 1650 windforce oc rev3.0 as its tdp is not mentioned but it has 8pin

@k-nemo

3 ай бұрын

@@user-qg2pz9uv6w I wrote in the description. This is not a perfect solution. It is better to replace the PSU with a new model with the appropriate plugs.

@mattdudley3789

2 ай бұрын

Yes. 1650 in vanilla form is a 75w slot powered card. The 8 pin gives it the ability to use more than factory TDP and overclock it a bit. The bios will have more headroom than one without the connector.. so if you run the graphics card at +0% power, it’s literally slot powered

what cable are you using there? (power supply 1)

@k-nemo

5 ай бұрын

PCIE from PSU

Help, i dont have any pci power connectors, what do i do now?

@k-nemo

2 жыл бұрын

Change PSU?

@ultrafreshlol6768

2 жыл бұрын

@@k-nemo Is it possible to use a adapter? since i have these 4 poles thingy i dont know what they are called but ive seen some adapters for it on the internet