Must be nice to work on perfectly clean bikes in tip/top condition with all the proper tools and a nice garage. We all know in the real world, we are trying to get off crusty, rusty stripped bolts with improper tools. LOL

@trumathamanstories1126

2 жыл бұрын

Honestly lol

@immanuelbrysen5962

2 жыл бұрын

I dont mean to be so off topic but does someone know a tool to get back into an Instagram account?? I stupidly forgot the password. I would love any tricks you can offer me.

@kelvinkelvin467

2 жыл бұрын

@Immanuel Brysen Instablaster ;)

@immanuelbrysen5962

2 жыл бұрын

@Kelvin Kelvin thanks so much for your reply. I got to the site on google and Im trying it out now. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.

@immanuelbrysen5962

2 жыл бұрын

@Kelvin Kelvin It did the trick and I finally got access to my account again. I'm so happy:D Thanks so much, you saved my account :D

Thanks for the info. I definitely needed to hear that rag trick super helpful.

Absolutely awesome finished my front end bearings and seals , roaters and pads , now time for roaters and pads in the back I’m on a 2020 yz250F 56 hours on the engine..

No way! Thank you! I knew there had to be an easier way than I was doing it.

thank you. Great clear video helped me install my wheel :)

@rmatvmc

5 жыл бұрын

Glad it helped you out! Thanks for watching!

its capale with a 2019 yz450f 2019 thanks man i need to upload more videos also im a fan

Thank you!

This channel has helped me out so much, thanks!

Thanks Stevie awsome 🤠👌

Great video, well done.

@rmatvmc

5 жыл бұрын

Thanks a lot, Jim!

@sean.g4516

2 жыл бұрын

@@rmatvmc do you guys sell axle blocks & adjuster bolts for a 2001 yz250 2stroke ? Didn't see anything that fit on your sight

I have a question: is it normal to have a left and right gap between the swingarm and the wheel hub, spacers, bracket?

Thanks for this video my chain came off and I had to remove the rear wheel to put it back and and was worried i would do it wrong and I'd be going along and my wheel would fall off or something but all is good

@rmatvmc

Жыл бұрын

That's great! We're glad the video helped.

Hi... would a rear wheel set of a CR 250 fits a kx250f? Thanks

Took my shaft out today to install new chain and sprockets. BUT the seals and bearings came loose from inside the wheel now I'm stuck, wont go back in and dam shaft wont/cant slide out cause on the chain side the spacer and bearing is in the way.

You should show how to put the coder pin in

What Axle Blocks are those ? Looking for green just like those for my 2024 KX250X with the 1 bolt adjustment ? What the Rocky Mntn part # for those please ?

Having a problem where the brake hole that the bar goes through wont align in anyway that i possibly move it.

Wheel spacers are lost, where can I get something like that? I hope you can help me

What happens if you list the brake lever?

How is this bike completely spotless!

@GalenKiser

3 жыл бұрын

yea?????/

@enzothecanecorsomix9283

2 жыл бұрын

Probably a new dirtbike

@CatholicCrusader__30

2 ай бұрын

Not used.

So what should I do if my brakes won't let my wheel turn? How do I fix this issue some one please help!

How far back can you go on the rear axle or how foward can it be and how does it affect the bike?

@lostinpa-dadenduro7555

2 жыл бұрын

It shorten or lengthens the wheelbase and can alter the handling characteristics. The super cross / MX mechanics do it to the race bikes. An additional adjustment option to tune the feel of the bike.

What size socket do we need for a 2001 kx 250 axle nut? thanks

@CatholicCrusader__30

2 ай бұрын

Buy the oem.

what tool did you use for axle nut?

@geelongemergencymedia5913

3 жыл бұрын

large spanner

How do I get the wheel back in? If accidentally someone did hit the rear brake? And now the pads are shut together ?

@rmatvmc

5 жыл бұрын

You will most likely need to pry the brake pads apart and open up the bleeder valve on your caliper to let a little bit of the fluid out. If you do that carefully you shouldn't need to bleed the system. Hope that helps!

@cohenwilbur2775

3 жыл бұрын

@@rmatvmc what if the caliper it self is pushed over how to u get that back over to fit the wheel

I have a question what are the green things called? The ones that are in between the axle nut. Plz help

@rmatvmc

5 жыл бұрын

They are axle blocks or sometimes called chain adjustment blocks. Thanks for watching!

I just installed a new rear sprocket and axle adjusters on my 16 KX450F and after I tightened nut with torque wrench my tire will barely spin now? Any ideas would be awesome.

@rmatvmc

3 жыл бұрын

Something is binding up. I would remove it again and look for the problem.

@e-money2427

2 жыл бұрын

Too tight maybe

@CatholicCrusader__30

2 ай бұрын

Must have over tightened it.

Don’t forget ya safety glasses 🤣

@rmatvmc

7 ай бұрын

Can't forget those! 😜

@robhayter484

7 ай бұрын

🤣🤣

what size socket s that

@rmatvmc

5 жыл бұрын

It's a 32mm socket for the rear axle nut on this bike.

Would this work for a kids dirt bike

@rmatvmc

3 жыл бұрын

It will be very similar for most kids bikes so this video should help you with that as well.

High, are the spacers only on one side or are they on both sides? Cheers.

@rmatvmc

5 жыл бұрын

On this set up there are spacers on both sides of the wheel. Thanks for tuning in!

@vaughnstefan4891

3 жыл бұрын

I don't know if I'm missing one on my KTM 150 I only have one

I just put my wheel on after putting new spokes on it and it is to left and to close to the chain anyone know why

@singlejingle_ka

3 жыл бұрын

Probably missing a spacer, thick washer looking thingie that distances the wheel from the swing arm

@bryson96.

3 жыл бұрын

@@singlejingle_ka sorry lol should have deleted the comment but the spoke were put on incorrectly, I have a kx 85 and the rear wheel has 3 different sized spokes and the guy that put them on out the wrong sized ones in the wrong spot

@singlejingle_ka

3 жыл бұрын

@@bryson96. yikes bro! I thought you meant the wheel spacers. Glad you got it figured out now!

MINE IS TIGHT

MY ADJUSTABLE WRENCH FELL ON MY BRAKE LEVER

What if ur axle won’t come out

@zimited27

3 жыл бұрын

rubber mallot should do it lol

Does it really matter what side your axle nut goes on?

@rmatvmc

Жыл бұрын

Yes, on most bikes the axle will only slide in correctly one way.

@matthewschroeter9045

Жыл бұрын

@@rmatvmc alright because I had a rm125 and the axle nut was on the right side of the bike and I just got a crf250 and the axle but is on the left side of the bike.

@CatholicCrusader__30

2 ай бұрын

Yes but the axle holder should be in one side.

All of these videos shows you everything except where tf does the wheel spacers go on each side. I’m getting frustrated

@CatholicCrusader__30

2 ай бұрын

U should install it to the wheel hub and remember to apply grease for smooth movement.

Only if it was the easy🤦‍♀️