Hey everyone! I've been dormant for a while, but I just posted a new video explaining how to use the amdvbflash CLI tool! Go check it out here: kzread.info/dash/bejne/mXelktGTXcyamJc.html

@pcstream1248

Ай бұрын

Bro one more question , how and where to know the change log of a new gpu bios update ,there's just a download and detail option for not change log info.?

@BitGoblin

Ай бұрын

Honestly none that I'm aware of. Best I can say is to compare the details on each VBIOS, unfortunately.

@pcstream1248

Ай бұрын

@@BitGoblin Bro i flashed r9 290x successfully.

@BitGoblin

Ай бұрын

@pcstream1248 that's good to hear!

Thank you SOooooo MUCHHHHHHHHHHHHHh!!! Recently I bought a used AMD PRO W5700 from Ebay and its being for a almost a WEEK, trying all type of tweeks to put to work on Win11! Drivers always failing to install, windows Update, Motherbord BIOS configs... can't even remember the counteless new Windows instalations I did!!! Cant remember something like this since my youth... Its being a Marathon!! Almost gave up... 😔😔😔 Until I began searching for VBIOS on the internet as a last resort!! Found some links and took me to your channel and this video!!! Followed your tips... made a VBios update and VOILA!!! Drivers installation went perfectly, everything working like it should be since day one!! ❤❤❤ You definitely make my day!! Earned a new subscriber!! MASSIVE THANK YOU, FROM PORTUGAL!! 👋🤝

@BitGoblin

9 ай бұрын

You're welcome! I'm glad I was able to help you get your graphics card back to working condition! :D

Thank you for the tutorial was super easy to follow and I liked the story and commentary behind it. Subscribed!

@BitGoblin

Жыл бұрын

You're welcome, and thanks! :D

5:58 you should probably click on the link to look at the contents of the bios and make sure it supports the same kind of memory on your card. sometimes same make and model cards come with different memory

Thanks for the video, much appreciated. I picked up a 2nd hand Gigabyte Eagle RX 6700xt recently for cheap (likely ex-mining) after getting it setup and installing the drivers the Core Clocks were stuck around 500mhz, memory at 2000 and performance was sluggish 50-60w 99% util (maybe a mining bios?) Followed your video and it's working great now. 👍

@BitGoblin

10 ай бұрын

Awesome! I'm glad to hear that! Both you fixing the graphics card, and the keeping another old GPU from being e-waste is another bonus :)

Thank you! Was able to use your video to flash the proper bios to a card someone gave me!

@BitGoblin

5 ай бұрын

I'm glad I was able to help!

yo ma bro, Im glad to see new video😎💪💪, this is definitely GOOOOD to know😁, n btw I remember you told me this ebay story on discord thanks 4 sharing this🤜🤛

@BitGoblin

Жыл бұрын

Haha thanks! I'm definitely glad to start making videos again

this vid really helped, i bought a firepro w7100 and couldnt get the grips on the flashing software, and this explained everything! it hasn't finished flashing yet, but it seems promising! once again, thank you so much!!!!

@BitGoblin

7 ай бұрын

Awesome, I'm glad it helped! :D I hope the flash goes well!

@setMaddy

7 ай бұрын

@@BitGoblin with a little fiddling and running through console, it turned out perfect, thanks again!!

@loganmccoy8900

5 ай бұрын

@@setMaddy I have the same card as you. can you share what bios you are using to get it done successfully? I keep getting system mismatch error when trying to flash it. TIA

Looks like the issues I am having with a a 5500xt that I bought from Craigslist. It's been forever since I flashed a GPU bios, so it was good refresher video. I will report back.

@BitGoblin

3 ай бұрын

Good luck!

Men thank you so much, I have a 380 overclocked by Saphirre, and it just happen when I was playing, black screen and a dot on my motherboard appearing, I just followed the step, got a new version and the UEFI work again ! Thanks :)

@BitGoblin

12 күн бұрын

Awesome, I'm glad my video helped! :D

Thanks for the video, same thing just happened to me. I bought a RX 570 4GB on eBay. I got no video output at on my X470 AMD system, thankfully I got video output on my old B-85 Intel board. The AMD installer would crash every time I tried installing the drivers. Reflashing the Bios was my last hope, thankfully it worked. There were RX 570's that were 15% cheaper because they had mining bios, and the seller didn't fell like reflashing them all, so he gave a discount. I went with this one because the seller said it was in "Good Condition", no mention it was a mining card, or that it had a mining bios. I paid the extra money, so I wouldn't have to deal with this BS. Luckily, I've been tinkering with computers for a while and had back-ups I could use for testing. The seller sold two total, I feel bad for the other buyer, I hope they can figure it out.

@BitGoblin

9 ай бұрын

Yeah, the seller should definitely make sure it's clearly marked in the description that it's got a mining vbios. Some do it well and it's not too hard to correct, and can be a great value if you're willing to take the risk it's not just straight up bricked. In retrospect mine didn't need a refund if I had just tried reflashing it, but if it was some business with a different vbios then the seller should've noted it in the listing. Or made sure it was in working order lol.

The different (officially verified) bioses are for different cards. Usually, (on both nvidia and amd) it works fine to flash one to another but it is possible it can cause issues. For example my card is "F3" iteration, and there is both "F2" and "F3" bioses (exact same, same card, model, clocks etc.) however the "F3" is suitable for me in my case. Sometimes (with for example gigabyte gtx cards) "F1" might be flashable to "F5" but not "f10". You can usually find these info on manufacturers site. But generally, pretty safe to flash "wrong" bios.

@lukasd4575

Жыл бұрын

I just flashed my rx 6700xt, i used the bios from the tech site he was showing in teh video, everything went well the flash tool told me to restart my pc which i did… now my pc wont start, instantly goes into the repair tool and goes full black screen after, i dont know what to do since i cant boot up my pc anymore.. since you said it is safe to even flash a wrong bios and i think i dont even got the wrong one, maybe you got more knowlage than me and can help me

@user-wq9mw2xz3j

Жыл бұрын

@@lukasd4575 i mean the worst and absolute nono is if flashed one which was made for different memory (some 6700xt use Samsung, others Hynix). You might be able to flash it back correctly by using integrated graphics or another GPU to get display, while having this defect 6700xt inside at same time. And then flash correctly.

@boonsengtan9023

Жыл бұрын

@@lukasd4575 Wow did you manage to fix your issue in the end?

@neburo69

Жыл бұрын

@@boonsengtan9023the fix is so essy

@tempestrevanplays6867

11 ай бұрын

i have the same issue please help what do i do @@neburo69

Wow very usefull sir..ty so much for making this video ..i had try many time reinstall driver..and doing many other process..this vidoe only fix my prob.ty so much

@BitGoblin

Жыл бұрын

Awesome! I'm glad it helped :)

I have only the integrated bios registered on the tool afraid to hit program to want to mess up the integrated one any advise?

I had the same issue with my 6700xt, I bought it as an used mining card, and it had mining firmware on it preventing windows to decide what to do with it, a quick flash and it worked just fine.

@BitGoblin

Жыл бұрын

That's awesome! Sometimes rescuing GPUs can be easy :)

@Tofu_____

Жыл бұрын

Same on my vega 64

@serajr

Жыл бұрын

Oh great. Is it safe to flash edited stock vbios or different subsystem id vbios on rdna2 (navi 23) series? I thought it was locked up for that!

@gaganpreetxp

10 ай бұрын

Same thing here luckily i found a software name, atikmdag patcher it solved the issues.

"You'll need it only in a few scenarios" Mining crash: "Am I a joke to you?"

@BitGoblin

Жыл бұрын

It depends on your interpretation of "a few" ;)

@justjoe5373

Жыл бұрын

@@BitGoblin I know, I was making a joke about the mining crash and the AMD cards being the popular choice with a BIOS flash since nVidia conveniently did that themselves. But yeah aside from that there aren't many reasons to flash BIOS

Will flashing my GTX Titan X essentially fix the 'nvlddmkm' error I receive?

This helped me a lot thanks

@BitGoblin

Ай бұрын

You're welcome! :D

I get failed to flush my card and geting in some issues i flushed my card then its show to reboot and they didn't give me display what should i do know

I have asrock b450m hdv r.40 motherboard which says ryzen 5000 ready And I have ordered ryzen 3 3200G which is ryzen 3000 apu Would my ryzen 3 3200G work with my motherboard without bios downgrade or update????? Please reply it's urgent.....

Great video, do i have to install the GPU drivers before flashing it or not ?

@BitGoblin

2 ай бұрын

You know, I think you do but I don't know for sure. I'll have to test this!

Hi.. I have 2ndhand msi mech rx 6600, it has lower clock, 100w max power, 0 rpm below 50, 100% rpm above 50C. Will my gpu back to normal if i flash the bios?

@BitGoblin

11 ай бұрын

That sounds like it has a VBIOS tuned for crypto mining on it - so yes, it can if you flash one to get it back to the stock settings :) Good luck and be careful!

Bro after downloading bios and when i load in amdvbflash tool it shows a different P/N number should i flash or not , both cards are same but P/N are little different see this - Original is = P/N 113-C6710101-100 & new one is = P/N 113-C6710101-U2

My friend bought Rx 580 and all the ports on it are missing except the dvi port , it looks like the graphic card was used for heavy mining and its bios is broken and drivers are bugged and aren't loading , another pc technician tells just vbios flash the graphic card , will this work ? Also one of the fan isn't running

@BitGoblin

5 ай бұрын

Flashing the VBIOS could help in this case. The seller could've flashed a VBIOS that disabled the display ports and only ran one of the fans to save power (or just messed up the curve). No guarantees, but it's definitely worth a shot!

i have an xfx rx 570 8gb it has a clock speed at 1226mhz i checked all the rx 570 variants and the lowest clockspeed (defualt was 1244mhz) and xfx models had 1286mhz so im looking to gain that orignal clockspeed (1286mhz) can i do it safely

@BitGoblin

Жыл бұрын

Yeah the vbios flash is pretty safe in my experience, as long as you have another GPU on standby to reflash it in case something goes wrong

Any idea why the newest verison of AMDVBFlash / ATI ATIFlash (5.0.567) doesn't have the amdvbflashWin.exe file? I am at a dead end without that.

@BitGoblin

Жыл бұрын

The GUI was retired in version 5, so it's only the CLI tool. I plan on making a video for the CLI at some point, but in the meantime there are some guides online on how to use it

Hi Greg, I'm in desperate and hoping you can help. I bought a used "Lenovo Thinkpad E590 8th Gen Notebook Intel Quad i7-8565U 1.80Ghz 8GB Full HD RX550 2GB" and I'm facing the error "Windows has stopped this device because it has reported problems. (Code 43)" when launching DaVinci Resolve. I've tried these methods without success: 1. Uninstalling drivers with DDU and reinstalling the latest version of AMD Adrenaline. 2. Uninstalling drivers with DDU and reinstalling two previous versions of AMD Adrenaline. 3. Using AMD Auto Driver Download. 4. Downloading and installing AMD Adrenaline software offline. 5. Using Lenovo Service Bridge for updates. 6. Windows updates didn't work either. 7. Flashing the card with "amdvbflash_win_3.31" gives the error "Cannot find discrete ATI video card." 8. Can't boot from USB due to enabled "Device Guard" on the Lenovo. 9. Tried resetting the card with "atikmdag-patcher-1.4.14" to no avail. 10. Launching Adrenaline prompts an error mentioning automatic Windows updates. I've reapplied thermal paste and reinstalled both Windows 10 & 11, but the problem persists. The graphics card is "AMD Radeon RX550X 2GB GDDR5," and I've reported the issue to AMD with no assistance. Please help.

help is Radeon™ RX 570 GAMING 8G (rev. 2.0) really don't have "The board ID is: xxx-xxx-xxx" is this normal? cause I see on your video it has numbers.

Hello i bought a sapphire rx 5600 xt used in mining from china. on the GPU-Z it shows a different subvendor, powercolor instead of sapphire. this card seems to be modified what should i do? should i just flash the original bios?

@BitGoblin

6 ай бұрын

Hmm, my guess would be to flash the vbios with an image for the model it should be. Unless maybe the graphics card was just mislabeled in the listing?

Hey man....Great video!!...thanks...got a like from me! ;)

@BitGoblin

8 ай бұрын

Thank you! :D I'm glad you liked it!

Thank you!

@BitGoblin

Жыл бұрын

You're welcome! :D

Can you help me? If i start the ATI program not running just a message show up what say " Cannot find discrete ATI Video card" but i have AMD Radeon RX 6600m.

@BitGoblin

Жыл бұрын

Hmm, that's a tough one. If you haven't already, it might be worth trying to update your graphics driver, or trying a different version of ATIFlash. I'd also check if the device shows up in Device Manager.

I have an 8GB RX 580 2048sp that came with artifacts, in some games the textures flicker black, in not so demanding games it works normally, just like being in a common app, will changing the BIOS solve the problem?

@BitGoblin

Жыл бұрын

Good question! It's possible it would fix it, but artifacting to me would suggest that the memory is bad (most likely, since less demanding on the VRAM) or possibly the GPU itself is having errors. Flashing a new firmware shouldn't hurt though, it's definitely worth a shot if nothing else :)

I have a Axle Rx 580 but I can't find the card vendor in the video bios collection . Any ideas?

@BitGoblin

Жыл бұрын

Would this possibly match your GPU? www.techpowerup.com/vgabios/252821/252821 I went to Google and this page popped up from TechPowerUp. It's got a warning about an unverified BIOS file, so I wonder if that's why it wasn't popping up in their database search?

Hi like you i purchased 3 gpu's from ebay and all 3 crash when the driver is loading. I replaced the thermal paste in them all but still the same result. I am going to try and flash the bios following your instructions and i hope that will remedy the problem, wish me luck. Great video cheers.

@BitGoblin

Жыл бұрын

That's awesome :) I love seeing used hardware getting new life elsewhere. Let me know if you get them working! Good luck

@spangles3654

Жыл бұрын

@@BitGoblin I will ty for the reply

@pcmanraul

Жыл бұрын

@@spangles3654 did you get them working?

@spangles3654

Жыл бұрын

@@pcmanraul No I tried 2 with no success i will try the other soon.

@spangles3654

Жыл бұрын

@@BitGoblin Hi no success so far 1 more to go

I bought an Aisurix 5500 XT and gpu-z shows it as a non XT- 5500. im guessing this would probably help. the screen randomly flashes black then goes back to normal. happens at idle or load, whenever it feels like it.

@BitGoblin

Жыл бұрын

Yeah it's definitely worth a shot - sounds like someone flashed a different BIOS on that card to change clock speeds or something. Let me know how it goes!

@MrMarrok657

Жыл бұрын

@@BitGoblin yea I think when Aisurix got their pallets of gpu’s they just popped a new cooler on the board with new stickers and flashed it. I want to get ahold of a second gpu just in case this one bricks. it does read the same clocks and performance just the screen flickering randomly is annoying. Thank you very much for having made this tutorial!

i have a problem with rx 570 sapphire pulse , it runs with no problems until it draw more than 90 watt if it excedds that it would black my screen and GPU fan speed reach 100% i tried changing my PSU and even the Tried it on another PC , still got the same problem what should i do ?

@BitGoblin

7 ай бұрын

Hmm, I'm honestly not sure what to do in this case. Since you've ruled out power supply, PCI-e cables (from trying the new PSU) and your build, I'd lean toward it being something to do with the power delivery on your card or maybe the GPU itself is having trouble under load. But I'm not sure how you'd diagnose it further

Hey i have an rx570 and i dontk know why after installing driver the fan suddenly turn off it wont turn on and the temperature reach high still it wont turn on and then i checked on the gpuz the ram and the core showing 0mhz and i tried with another driver it still the the same, i was frustrated i swappee with another motherboard and it still the same, could it be a mining bios? I was bought it used rx570 sapphire nitro

@BitGoblin

7 ай бұрын

It sounds like it could be a vbios issue, especially since it can't read the core clock or anything. Definitely worth a shot to reflash it

My rx 570 does not give any desplay I played fortnite the night before and the next morning desplay was gone I switched to my older card and that one works any advice I only have 1 GPU port to plug into I have micro ATX motherboard

@BitGoblin

Жыл бұрын

Hmm, that's odd. Usually a GPU's firmware doesn't go AWOL like that overnight, but it's worth a shot! Assuming you have a 1x slot available you can get a cheap PCI-e riser to connect your RX 570 while you flash the BIOS. Something like this: www.amazon.com/ChenYang-Express-Extension-Extender-Converter/dp/B00S6GK06Y/ref=sr_1_7?crid=1D4E4E1MYFH8O&keywords=PCIe+riser+1x+to+16x&qid=1679586234&sprefix=pcie+riser+1x+to+16x%2Caps%2C75&sr=8-7

hi, recently i have installed windows and my Aorus rx 570 gup drive doesnot install properly, i used this gpu in mac os (Hackintosh) and it was fine. but i moved to windows for using 3ds max. i dont know much about bios, vbios. please help me to get out of it

@BitGoblin

Жыл бұрын

Hmm, that's a tough one. Maybe flashing the VBIOS would work? I wouldn't think that Apple does anything off with their GPU VBIOSes, but it's certainly something I can see them doing.

Why my ATI flash opens in cmd and i cannot see this window where I can upload the bios ?

@BitGoblin

6 ай бұрын

It sounds like you're using the latest amdvbflash version, and the GUI was dropped in 5.x. You'll need to use an older version if you want the GUI, or the CLI if you have a newer card (like RX 6000 and 7000 series)

When I place my known working rx 580 into the main top pcie slot while having the bad rx 580 in the bottom pcie slot the good one won't display and VGA motherboard debug light is on. Help?

@BitGoblin

8 ай бұрын

Huh that's an odd one. I'm assuming you have a sufficient power supply for both GPUs? And does the system post at all or do you not even see the bios splash screen?

@paulf2480

8 ай бұрын

650w EVGA G6 psu so covered there. No display or bios post?!

Damn... im tryna flash my rx5600xt that i just bought second hand, because it keeps black screening when under a load, but nothing works... i tried the newest version of amdvbflash aswell as 2 other (older) atiflash versions. So the newest doesnt contain the amdvbflashWin file, and so i tried running the other executable, but it showed nothing but an empty console window (no commands or nothing worked). One of the older versions didnt recognize that i was using an ati/amd card and the other when trying to open it - did nothing... im losing my mind because in this state the gpu is useless and nothing works.

@BitGoblin

8 ай бұрын

How old of a version did you try? IIRC 4.71 should be good for the RX 5000 series

This could be worth a try. Back in April I installed a new update in Adrenaline from AMD and eversince I had horrible problems with the performance of my 6800XT. Tried a buch of stuff but nothing worked. Not even resetting motherboard bios and reinstalling windows several times. Maybe this helps 🤔

@BitGoblin

9 ай бұрын

Huh, that's weird that a driver update would've borked a graphics card like that. I could maybe see if it was an older card that dropped support, but the 6800 XT is not old lol. I'd suspect maybe it was a bug in the driver unless you've tried a few different versions since then. A vbios flash could help if the image loaded on the card got borked somehow

@nico3064

9 ай бұрын

@@BitGoblin Directly after the new update in April I tried to go back to the older version of adrenaline and the drivers which worked without problems. It made things a bit better but still had problems. I also tried a few newer updates which followed in the months after April but ... Out of luck again. Last week I ended up getting a 4070, installed it and all the problems are completely gone. Everything works as it should. But now I have a 6800XT laying around here without a idea what's wrong 😅

I bought a refurbished Radeon Pro W5700 expecting to use it on my Mac mini with an Akitio Node Titan eGPU enclosure. For some reason though, I can only use it on my Windows desktop because that's the only thing that worked when I tested it. Any time I tried eGPU on a Mac, it would kernel panic and boot loop until it was powered off or disconnected; then the Mac worked just fine like nothing happened. This GPU *should* work on macOS, because I've seen other KZread videos showing the W5700 working on a MacBook Pro. TechPowerUp shows that the VBIOS to my GPU has three different manufacturers: AMD, HP, and Dell. Turns out, mine has an HP VBIOS, since that's the only one that didn't pull any errors when I tried to flash it. I'm guessing that since my GPU came with a bunch of HP documentation, it was an OEM part to an HP workstation. Does that mean my GPU is basically region-locked? Is there a way to bypass this and install a proper AMD VBIOS?

@BitGoblin

Ай бұрын

It's possible that HP looked down their BIOS or at least did something weird that isn't compatible with MacOS. But I'm not super familiar with running an eGPU on Macs to know for certain. Let me know if you end up figuring it out though, I'm very curious what's wrong!

@FoxyGekkerson

Ай бұрын

@@BitGoblin I’m currently chatting with Apple community support forums, and they’re saying that the OEM locked GPUs haven’t really been an issue for macOS since 2012. They’re suspecting some weird graphic driver issues withmacOS Sonoma in particular. They’re having me test my eGPU on an older version of macOS like Big Sur, which I’m installing now.

@BitGoblin

Ай бұрын

I would not have guessed that! 😅 let's hope an older MacOS works!

When i try to flash bios with the latest version it says p/n mismatch. But when i download the 3.04 version and open up the insttool 64, it opens up for a split second and then closes immediatley

@theinvisibleguy_AK

8 ай бұрын

bro if u find the solution plz tell me i have the same issue

I have same problem with my Asus RX 580 8GB mining edition with only DVi display port, it turns off display and the GPU fans stops while the CPU fan is still running….. I don’t know if I flash a new bios it will solve the problem

@BitGoblin

7 ай бұрын

It's very possible it has a mining VBIOS that disables the displays and makes the fans hold off til it gets hotter. It's worth a shot IMO.

i have dual bios card the other bios gets code 43, can i use the bios from the other bios?

@BitGoblin

11 ай бұрын

I'm sorry, are you asking if you can flash the working VBIOS to the other side? If so, I believe that should be doable - you'd just need to save the VBIOS from the working side, then use the resulting rom to flag the other.

only reason im looking to do a gpu vbios update with original or custom firmware...is to fix the fanspeeds on my 7900xt (the fancurve on the current bios...does not even bother to go above 60% speed while gpu temp goes above 100.C) and i think that is just wrong settings..

@BitGoblin

11 ай бұрын

100% that's silly, epecially so if that's stock firmware! These days, any bit of cooling not utilized means you're leaving performance on the table. Let me know if your VBIOS flash goes well!

@speedydanny4624

11 ай бұрын

@@BitGoblin i know very well,doing updates for bios/vbios is silly but i also do not update stuff without a good reason. i only do updates only in critical moments. i do have lots of reasons not to do it. 1.vbios can only be flashed around 5 times or less(on gpu) 2.some cases you cannot revert back to the stock one(this is for motherboards idk about gpus) 3.flashing vbios waranty voids (so NO UPDATES) 4.i can still control the fans just fine with a custom fan curve in adrenalin(so the problem is not critical or urgent) 5.never mess around when flashing a bios(here the chances sometimes are like 50-50% win or lose) for now i can stay just fine the way it is(as long adrenalin works in the background as it should) but i dont like the gpu having high temps and then going to thermal throttling because gpu hotspot is too high and fans wont spin fast enough for now il just stay and watch to see what problems appears on the web i can still wait a for a while

why do I not have the GUI version of AMDBVVFlash when I extract the file from Techpowerup?

@BitGoblin

11 ай бұрын

The GUI tool was discontinued with version 5.x, leaving only the CLI tool. If you're trying to flash an older card (before RX 7000 series I believe) then you should be able to use an older version.

I'm trying to flash my 7900xt with the latest bios update but there isn't an option for "amdvbflashWin", i don't have that option, so i cant get into the flash menu, apparently its been removed on the latest one, what other way can i do it bud? :-(

@BitGoblin

3 ай бұрын

You'll have to do it from the CLI since you have one of the newer cards. I think there's instructions in the archive that's provided, and there's also a guide here on the techpowerup forum: www.techpowerup.com/forums/threads/amd-ati-flash-command-line-cmd-syntax-mini-guide-windows.291671/

I dont think you answer but i need vbios for Xfx rx 470 8gb, not 4 but 8 gb card...

@BitGoblin

3 ай бұрын

Were you not able to find an image on the TechPowerUp website?

Same problem with my asus dual rx480 8gb this that solution risk for it ?

@BitGoblin

3 ай бұрын

Yep, it fixed my RX 570 4GB at least :) it's also possible you have a different issue, but the flash is worth a shot!

i have one question i flash my gpu 3 time and in the 4 time i can't flash it what the selution

@BitGoblin

23 күн бұрын

Honestly I'm not sure why you'd be unable to flash the VBIOS again. Maybe the ROM was locked at some point?

is this can set my amd graphics to default bcs i have sort of errors after updates bcs it is dugget up

@BitGoblin

6 ай бұрын

It's possible it can help though I wouldn't expect it to. Usually updates would just affect the driver and not the hardware, and it's possible you need to do a clean install of your drivers if you're seeing recurring issues. What kind of issues are you seeing? And what GPU is it?

I have a XFX RX 580 8GB with corrupted bios, no ATIFlash or AMDVBFLHASHWIN that I try works, it always gives Windows 8 error or something, is there any file that I can use to reinstall the bios of my 580? thanks (I use windows 11)

@BitGoblin

11 ай бұрын

What version of amdvbflash did you use? It's possible you might need to use an older version (or a newer one if you have a really old version).

the amd bios GUI doesnt open for me. Im on windows 11, anyone else?

Help pleace! i have that problem with an rx550 and can't find a good vbios It's a powercolor rx550 2gb 64bit bandwith

@BitGoblin

8 ай бұрын

I found this "unverified" vbios image on TechPowerUp: www.techpowerup.com/vgabios/199653/199653

I have an internal graphics card, but when I add Rx 580 2048SP , it doesn't show up in my computer !!! Please help me

@BitGoblin

Жыл бұрын

Do you see another Display Display Device or something along those lines in Device Manager? If so, it might be you have to install the AMD drivers for it to show up.

dont u need the driver first for the flash tool to work?

@BitGoblin

Жыл бұрын

You know, I don't know for sure. I'd assume so but I haven't tested it lol

Am having RX 580 XFX AMD Graphic card if I plug it in my system unit the PC will switch off

@BitGoblin

Ай бұрын

I'm sorry I'm not sure I understand what you're saying - it doesn't power on when you install the graphics card?

After flashing P/N not showing on amdflashwin how will i know my bios is changed or not? My problem is my gpu is fluctuating its usage like 90% sometimes and sometimes it drops to 2% i am not getting the desired fps i have an used gigabyte rx 570

@BitGoblin

12 күн бұрын

The GUI is a little finicky and it might be that the flash didn't take or something. But you might be able to view it from the amdvbflash CLI tool

So i have an old rx 470 that i plan on upgrading the gddr5 1gb vram chips to gddr6 2gb chips. I'm pretty sure I'll need to update the bios chip. Will it support the new 2gb chips? Because when I type in the parameters, there won't be a gddr6 16 gb version on the 470 on their website.

@johnruscigno5738

3 ай бұрын

Perhaps I answered my own question lol. Too bad Nvidia doesn't make a universal bios version where we can make our own parameters.

@BitGoblin

3 ай бұрын

Seems so lol. But I have no experience with modding my GPUs with more VRAM so I wouldn't be of much help unfortunately.

Does anyone have a method that worked for a MXRT barco 7600 that is actually a AMD Firepro W7100? I cannot get the BIOS version for the W7100 to actually flash to the card. I have tried DOS console and the GUI. I get error subsystemID mismatch with the GUI amdvbflash.exe but It acts like it wants to work but actually doesnt do anything when trying with DOS. @setmaddy do you have any input I see you also had a W7100

why am i getting a commmand prompt version o f the ati application?

@BitGoblin

Жыл бұрын

The GUI version was retired in version 5, so you need to use the CLI version now unfortunately. There's a PDF manual for the CLI tool and there should be some detailed guides online. Or I'll make one eventually :)

6800xt has a 6950xt vbios in it. It works overall but when it comes to battlefield 2042 it has graphical anomalies the second you spawn on map and persists untill I resets the computer. I have went through a checklist for the last couple days trying to figure out where the problem was coming from.

@BitGoblin

3 ай бұрын

It's possible the 6950 XT BIOS has your card on the edge and Battlefield 2042 might stress your card just the right way to push it over the edge. Have you tried potentially downclocking the core or memory clocks to see if that helps?

@johnaceto7126

3 ай бұрын

@@BitGoblin I was on a bit of a countdown, and I chose to return it to try and get my money back instead. I didn't undervolt or underclock it.

@BitGoblin

3 ай бұрын

Oh good, that was the smart move! I wouldn't have even tried to flash it or anything so there's no complaints when I returned it lol

How to fix Subsystem IDs Mismatch

please reply soon my gpu is r9 290x BF edition 4gb

Hello mister, do I need to plug a NVIDIA card to do so? Or can I connect another AMD card? P.S my AMD Sapphire 6600 XT shows no display like yours 570.

@BitGoblin

Жыл бұрын

Nope! You can use any functioning graphics card (even integrated graphics) as long as you get a display.

Hi sir I did all these things, but at the last stage, the system told me that the BIOS of the company was already installed on the card, but in many games it does not use the real power and has a large performance drop.

@user-xr3le6hx7p

Жыл бұрын

Is there another way to change the BIOS card, it has probably already been done with my card and the card was overclocked in the MSI Afterburnt settings, please guide me.

@BitGoblin

Жыл бұрын

I would try a different version of the BIOS that you can find on TechPowerUp - my card had a few different versions, and if the version you're trying to flash has the same version string as what's already on the card then it won't let you flash it.

@user-xr3le6hx7p

Жыл бұрын

@@BitGoblin Is it possible to change the version of the BIOS file before installing it to solve my problem during installation?

does you need a second gpu to do this? I only has my only one

@BitGoblin

Ай бұрын

Nope, you can run it perfectly fine with just one GPU. It's just useful if you have a second in case the flash goes poorly

Hi, I got a Asus Rx 5600 xt off of taobao for like $90....my problem is, the fans seem to be stuck at 100% fan speed (the cards is at at 100% fan speed at even 26 degrees) I have replaced the paste and tried to flash the bios but some how it's like the fan control is hard coded Update: sorted it out. It was simply a loose fan connector that probably wiggled out during shipping

@mrwoolfy3286

Жыл бұрын

Have you tried msi after burner?

@fenrir_szn6978

Жыл бұрын

@@mrwoolfy3286 I sorted it out....the connector wasn't seated properly so reseating solved it for me. It was a hardware issue anyways.

@shochi8872

Жыл бұрын

i have a rx 5600 xt too and one of my fan is stuck a 100 % too to fix this problem did you watch this tutorial ? or did it by yourself ?

@fenrir_szn6978

Жыл бұрын

@@shochi8872 I did it by myself....would suggest to try reseating the fan connector on your GPU

@shochi8872

Жыл бұрын

@@fenrir_szn6978 ok thx i'll try it

How about i dont have a 2nd GPU? it is possible to fix it?

@BitGoblin

4 ай бұрын

It's not required to have a second GPU to do the flash, it just helps in the event you need to troubleshoot a bad flash. Or in my case where my GPU wasn't outputting any display signal. :) If you need it though, you can use the integrated graphics on your CPU if it has one. Or maybe get a cheap used GPU to output a display.

Hi I just bought a second hand RX580 when I make a benchmark test,it will crash with a black screen and solution sir?

@BitGoblin

Жыл бұрын

A few things I would try if you haven't already: - Update your OS and drivers for the GPU - Use a program like hwinfo64 to watch GPU thermals when you're running a benchmark to make sure it's not overheating - Try the GPU in another system to determine if it's the GPU or your PC A VBIOS flash might help, but this sounds more like a hardware issue than firmware.

@MuhammadIsmail-yz8dd

Жыл бұрын

@@BitGoblin but the weird things when I watch KZread or surf internet it working as normal

Hi, i got an issue with my rx 580, it doesn't have many problem but only when i play a game it suddenly crashed and the monitor is blinking, should i flash my gpu ?, or there's something else i can do instead ?

@BitGoblin

Жыл бұрын

It's worth a stab. Have you tried like reinstalling the AMD driver? And does this happen with any other GPUs (if you have another)?

@ougazu32

Жыл бұрын

@@BitGoblin Yes i did that, but the result is the same, and yes i have another GPU but that is broken too

The version 4.71 is for Linux. Thats why the latest windows one seems to have a smaller version number.

@BitGoblin

6 ай бұрын

Wow am I dumb, I completely missed that. It's right in the file name... thanks for pointing that out!

How do i know if i have mining bios on my gpu ?

@BitGoblin

7 ай бұрын

You can probably check the VBIOS version string through a tool like GPU-Z and compare it to known working versions on TechPowerUp. That won't tell you for sure, but should give you a good idea of what's on it. You can also check if the display outs were disabled on it, that'd be a pretty big tell.

Hi, i dint have access to a 2nd gpu. Can i flash vbios via usb?

@BitGoblin

11 ай бұрын

I don't believe you can? You can flash your BIOS without a 2nd GPU using amdvbflash, you just definitely want to make extra sure you're using a compatible VBIOS so you don't lose the display on your graphics card :)

it doesn´t appear the "BIOS version" sequence number for me, what I can do about that? 😭

@BitGoblin

3 ай бұрын

You can possibly try another version of amdvbflash, or maybe try the CLI if you're up for it.

Hi, i run the amdvbflash.exe and nothing pop just and it just appear blank cmd on the screen. please help!

@strawmonk0785

Жыл бұрын

Im having the same problem Amdvbflashwin is not showing up just AmdvbFlashDriverInstaller.exe can I use this or no it pops up a cmd screen and not sure what to do from there

So I want to flash an AMD Radeon RX 6900 XT 16GB, but have no onboard graphics (Ryzen) and Radeon is not being detected by windows. I have an Nvidia 1080 I can use to get windows onto monitor. My question is ... do I have to connect power to Radeon card (3 X 8 Pin connectors) as I am already using 2 X 8 Pin connectors to power my Nvidia card? Many thanks...

@BitGoblin

11 ай бұрын

Yes, you will need to have all of the power connectors plugged into your card so it can be properly powered on when your system starts up.

@terryadie3845

11 ай бұрын

thamkyou @@BitGoblin

@BitGoblin

11 ай бұрын

You're welcome! :D

Sir i tried to flash my rx 580. And it just froze. I cant even hover my mouse cursor. Should i press restart button on my pc? or just leave it and maybe it'll finish flashing.

@BitGoblin

Жыл бұрын

That's tough, but you may just have to force it off if it's stuck. It might've finished but maybe the driver had trouble with it? It's hard to say, but I'd be prepared to another flash just in case.

@porktesinorn870

Жыл бұрын

@@BitGoblin sir just an update, i just pressed the restart button on my pc and it started well. i flashed another vbios version compatible to my gpu and it all went well. Thank you for the tutorial you uploaded. God bless!

Nice vídeo

@BitGoblin

Жыл бұрын

Thanks! :D

How did you backup the original bios?

@BitGoblin

4 ай бұрын

I didn't backup the BIOS since the BIOS that was on the card when I got it was already borked, but you can do so with the amdvbflash tool. IIRC you can pass the -s flag and a path to a file to tell amdvbflash to save the current image.

Do you know how to fix SSID mismatch

@BitGoblin

4 ай бұрын

I haven't run into this myself, but depending on your card you may be able to use an older (or different) version of amdvbflash to see if that helps.

My RX6700XT Memory type are from Micron and all the bios is Samsung only i cant find the Micron type from the tech powerup bios is it gonna be a huge problem if i just install it?

@BitGoblin

Жыл бұрын

I think it should be fine? I don't know if the memory chips would make a (huge) difference in the VBIOS, but if you try it let me know how it works!

@sloopypotato

Жыл бұрын

@@BitGoblin I don't want to take the risk and brick my only card lol

@BitGoblin

Жыл бұрын

Fair point lol

Can I change firmware while I'm using, or do I need 2 video cards to do the process?

@BitGoblin

Жыл бұрын

Yep! You can definitely flash the VBIOS of a running GPU. :) The only reason I had a second was to use for display when the RX 570 wasn't working.

@FurtadoPires

Жыл бұрын

@@BitGoblin Thank you! I'm not able to change my current firmware then I thought that could be the case

Hi I have done all the steps but still my Gpu does not take drivers, it still says (windows have stopped this device because it reported problems (code 43)

@BitGoblin

7 ай бұрын

What GPU are you having trouble with? If it's an older one, it's possible the drivers you have installed are too new for the card. It could also just be that the card is faulty in some other manner, though I don't know how to troubleshoot much further unfortunately.

@soundwave4642

7 ай бұрын

It's an MSI RX 570 gaming X 4gb

Hello, I have a Sapphire Nitro+ Rx 580 8gb It has dual bios. When I switch to the Performance bios It's showing Msi vendor with lower Memory and high clock speed 1380and 1750. I am planning to flash it and revert it back to the original Sapphire 1411 and 2000mhz bios. But when I install the flashing tool It only contains 6 files there is no amdflashWin file. When I run the AmdVbflashInstaller and Install the tool It won't showup, I don't know what to do can you help?

@BitGoblin

7 ай бұрын

Since you're work with an RX 580, try using an older version of amdvbflash (before version 5.x). The GUI was dropped in newer releases and only ships with a CLI tool now.

@tonvado

7 ай бұрын

@@BitGoblin hello, thanks for the response. I tried the 2.93 version and forceflashed it and now its working. 😀

@BitGoblin

7 ай бұрын

Awesome! :D I'm glad it's working now!

Can i make rx 6600 to XT version with this?

@BitGoblin

3 ай бұрын

It's possible. You might be able to make up some of the difference between the two models by increasing the core and memory clock speeds and increasing the power limit, but the 6600 XT also has more stream processors and ray accelerators that would also impact performance.

I have RX 580 2048sp MLLSE , but it shows me '' mismatch '... any help :((????

@BitGoblin

Жыл бұрын

What all have you tried so far to get this to work (e.g. reinstalling the Radeon drivers, or booting into Linux to see if it works there)?

Version 4.71 was a Linux version, v 3.31 was for Windows, that's why 4.71 was older :)

@BitGoblin

2 ай бұрын

Yeah I missed that little tidbit when I recorded this :)

How much time do you need to get to the point man? I'm trying to fix my gpu that can black out at any moment. But perhaps more damningly, this amdvbflashwin isn't in the download.

@BitGoblin

2 күн бұрын

Yeah I rambled a bit, I try to do better but it happens a lot lol. But the amdvbflashwin has been deprecated and removed from the latest version, you'll need to use the CLI now. I made a new video explaining how to use it 🙂

Sir can this process will work at 580 8gb OEM card

@BitGoblin

Жыл бұрын

I believe it should work, so long as there's a VBIOS image available for it.

1month ago I bought hp victus 16 R5 5600H Rx5500m In amd software there is no tuning option available (But I found that rx5500m supports undervolting) Can you please suggest a way to fix that Because I am trying to undervolt it because I usually play story games so 60fps is enough for me @Bit Goblin

@BitGoblin

Жыл бұрын

Unfortunately I don't have any ideas for to solve this, and I couldn't find anything while googling. Sorry I couldn't be of any help, but if you do find a solution please let me know! I'd be curious to know how to resolve it :)

Could someone help I have a xfx rx570 4g. It puts out video on the mining bios but when I turn it off and switch it to the gaming bios and turn it back on I get no video output from the hdmi? I'm stuck

@BitGoblin

8 ай бұрын

That certainly is odd. Have you tried using a DisplayPort cable while on the mining bios? I'd be curious if the HDMI port is disabled somehow. But it is possible that it's a bad image that's on the gaming side and just needs reflashed.

@user-bt1zn6ww9s

8 ай бұрын

@@BitGoblin yeah is very odd. I get video if it's in the mining bios but when I switch the gaming line I have no video. I'll try a display port and see what happens.

@user-bt1zn6ww9s

8 ай бұрын

@@BitGoblin yeah I was thinking it was needing reflashed but I dint know what I'm doing with that lol

@BitGoblin

8 ай бұрын

Well I have the tutorial for the flashing if you need it :P but shameless plugs aside it's really not too bad, the worst part IMO is finding the right image to flash and even that is not bad with TechPowerUp's database.

@user-bt1zn6ww9s

8 ай бұрын

@@BitGoblin I'll have a look at your tutorial and look more into it. Iv never dealt with a PC always been on console, just built a gaming PC lately, been hurting my brain hahaha

I flashed mine also, but after working fine for hours, it starting again to have same symptoms like before I flashed

@BitGoblin

4 ай бұрын

What are the symptoms? The new VBIOS might've been hiding something faulty with the card, or might've just been a coincidence you didn't experience the issues for a bit. Total shot in the dark, but depending on the age of the GPU it might be the core or the VRAM are degrading, and the new VBIOS you flashed dialed back the clocks just enough to be fine for a hot minute.

@carismaticul

4 ай бұрын

@@BitGoblin I bought it faulty, as being completely dead, after I flashed the bios worked fine for a few hours, and I think it would it work a lot of hours continuosly, but in the morning when I start the pc , same issue, now I flashed the bios again and gave a few restarts of the pc , and is fine so far

I downloaded the AMDVBFlash file from the website, but the *win file isn't there so im not able to get to the program. What do i do?

@TheWarewolf911

Жыл бұрын

disable your antivirus, same happend to me.

@BitGoblin

Жыл бұрын

Unfortunately newer version of the amdvbflash tool don't come with the Windows GUI tool anymore and you must use the CLI tool. I'll make a tutorial in the future on how to use the CLI. I had some real bad timing on this one lol...

@CJonesFL

Жыл бұрын

@BitGoblin that would be great. I'll keep an eye out for it. Until then, my rx 580 will just be chilling in the closet, haha. Take it easy, BitGoblin!

Can you please tell me how did you convince the seller to gives you a refund ? Because i have an issue like this but he says to me that i need to install a bios to the gpu and he send to me a bios file and i don't know if it will fix the issue or not

@BitGoblin

8 ай бұрын

Honestly I didn't do much to convince them, they just accepted the return request when I filed it through eBay. It was a very thorough request with all the things I tried, so maybe they just saw I tried and nothing worked? Tbh I wouldn't accept that as a possible fix and push for the refund. Requiring you to modify the card in anyway (including flash the vbios) could muddy the waters in the event he wants to fight it, giving them a chance to claim you messed it up somehow with the flash.

@Youni_E

8 ай бұрын

@@BitGoblin Okey i'll try my luck

I get an display driver not installed error with the flash tool, but I cannot install displaydrivers because of the mining bios what can I do? Please let me know.

@BitGoblin

Жыл бұрын

What OS are you on? I've seen that happen before when running an older Windows version that isn't supported anymore. You could also try running the AMDVBFlashDriverInstaller.exe tool that comes with the AMDVBFlash ZIP download.

@Panda-jl7ch

Жыл бұрын

@@BitGoblin yes, thank you it works now. I used the latest windows 10, thats why I was confused to see this error. But I flashed it succesfully. Thank you very much for your amazing video and help!

@BitGoblin

Жыл бұрын

Awesome, I'm glad to hear that! Can I ask what you did differently to get it to work?

@Panda-jl7ch

Жыл бұрын

@Bit Goblin just like you said, I ran the amdvbflashdriver installer instead of using normal drivers and it worked perfectly!