A clear, concise tutorial with no nonsense. Good show, sir, and thank you!!!

Thank you so much, you saved me. I just managed to recover a new video card, 7 days old, to which I had corrupted the bios. thanks to this video of yours I solved everything

A useful, well explained instructional video, Thanks a lot.

@F7GOS

7 жыл бұрын

+nasha thedog your welcome, hopefully it helps some gamers and builders out there save some money and their GPU!

Thanks man. You saved my HD 5970!

Thank u! I haven't tried yet but this gave me hope!

I personally don't have a bricked GPU, but I'm going to like this vid and bookmark it for future reference (could possibly save a lot of money on future builds as a result) Very clear and thorough, I found your video very easy to follow. Your voice, while slightly muffled, was oddly relaxing. Your other videos also seem to follow this trend - keep up the good work. You have earned yourself a new subscriber.

@F7GOS

7 жыл бұрын

+SvenLock thanks, I agree, think I need to invest in a new microphone! Thanks for the feedback.

I know this is a fairly old video but you have just saved me from a major headache after flashing the wrong bios on an old Radeon. Thank you so much it worked perfectly!

Something finally worked for me! Although my MB did not have onboard graphics, I used an older 9800 GT GPU (needed no additional power connections), plugged in along with my problem GPU. That old 9800 GT GPU is a great tool to have for situations like this and others.

@rumbodeglasas2797

Жыл бұрын

this comment saved my so i can use two ore more GPU's in a system and the bricked one is gona have its bios flashed along with this guide your comment saved me thank you

Thanks a lot, man! You've just saved my RX 480 from a bad windows bios flashing! Love You!

@ermalshala8383

Жыл бұрын

In my pc got like this setup cannot run in DOS

@GravityBlood

11 ай бұрын

@@ermalshala8383 i think it have to do with UEFI / Legacy boot option. new pc mostly set to working on UEFI(only) by default so you have to work around and manage the boot option to work with Legacy

For those who cant flash their 2015 AMD gpus, try older AMdflash for dos from 2016 year, it worked for me, the newer versions were putting the newer bios already programmed error... Hope it helps!

Thanks! That was easily understood! Help me a lot

Thanks, best instructable for gup's I've ever seen. Thank you!

Thank you very very much :))))) This tutorial was the best so far and it was easy and understandable so like from me. I succeded after few failed attempts but those fails were just because I haven't found the right bios in first attempt And ofc I am commenting from/with unbricked card and the feel I got after succes was like a ton of bricks felt of my chest :DD To others if the message "this program can't be ran in dos mode" just use specifically atiflash 4.17 (it worked for me at least) and if there is anymore problems just seek an answer in comments and answers to them. P.S. NEVER EVER FLASH YOUR GPU IF CARD WORKS FINE AND THERE IS NO NEED, and if there is need to do that just leave it to pros pls ;)

@kevinpeterpinili6237

5 жыл бұрын

what error did you get when you knew it wasnt the right bios?

Thanks a lot, fixed my R9 270. Couldn't get the latest atiflash to work so used this version (4.17) and had no problems. I will also add that if your PC doesn't have an onboard GPU it doesn't matter, just create the boot drive on a laptop or another PC

@gaby9517

2 жыл бұрын

And how do you run it without display?

@JesusChrist-sx1lf

2 жыл бұрын

You still need onboard graphics to display DOS after booting it from a USB.

Thank you very much, excellent tutorial, In october of 2021 still works like a charm

You just saved a HD6870, much love to you!!

This tutorial is awesome, managed to revive my card al the while having the newest bios on it, so cool

You and Random gaming are the best tech channels on you tube :D

I will try ! Normal ati flash didn't work for me the last time i tried . Thanks for the video!

Thanks alot saved me big time.

Thanks man. You saved my msi r9 390

Yooo thank you very much, I was flashing my gpu bios and apparently I messed up trying to mess the fan control and it bricked my gpu. I have an GIGABYTE AMD R9 390, also I changed the voltages.

I LOVE YOU SO MUCH THANK YOU . THIS IS ONE OF THE ONLY YT VIDEOS THAT ACTUALLY HELPED ME IN NEED . THX SOOO MUCH

@FuvkSadistic

3 жыл бұрын

Does this work on win 10

@techquire

3 жыл бұрын

@@FuvkSadistic it works on any windows os, you can probably do it with linux if you find a bootable usb maker for dos

Its 2021 and you're still saving GPUs with your video. Just saved my RX 570. Thanks you're going to heaven.

@F7GOS

3 жыл бұрын

glad it helped

@vrushabkudchi5328

2 жыл бұрын

@@F7GOS please can uh help meh how can i do the same thing to my laptop my laptop gpu is not working maybe changing the bios will help when i tried tht method which uh showed i cannot find my bootable pendrive so i cannot boot from it can you please help meh

@capinasam

Жыл бұрын

Please help i cant save my rx590 gme. I tried it but it always says “adapter not found” please help

thank you hero ...I was thinking about throwing it

Worked, many thanks

Thank you so much Dude, you are the best! Cheers!

I love these kind of videos.

@F7GOS

7 жыл бұрын

+Brandon Osborne thanks :)

@brandonosborne6894

7 жыл бұрын

Saving tech that seems broke to most but actually isn't is a favorite hobby of mine.

@F7GOS

7 жыл бұрын

Brandon Osborne it sure is a great feeling picking up something that someone has broken and fixing it!

@brandonosborne6894

7 жыл бұрын

Water damaged phones are one such thing I've taken pride in by replacing some of the board components

Hi, when I'm trying to flash my r9 390 I always get error 0FL01 after the last command

When do you unplug and replug the gpu in...Does the gpu need to be in the whole time? Just the display cable not into the gpu at first(when using integrated gfx)

I plan on trying this with my RX580 when I get home. So very grateful, even in 2021!

@tomsmith8478

3 жыл бұрын

Hey did it work? I have a rx 580 to and I’m wondering if this works

@AhmedSayed-yp9jk

3 жыл бұрын

@@tomsmith8478 did it work ??

Dude, i love u so much seriously just saved My life haha

Thanks to you i got an msi gaming x RX580 8Gb gpu for only $15

@smokegames1179

3 жыл бұрын

how thefuck

Thank you sir, you saved my bricked gpu! God bless you.

@jaylord55

3 жыл бұрын

good to know it works lol Plan on flashing my 3080 trinity for resizable bar. Hopeing noting goes wrong

damn i have reacerched for 5 hourers how to fix my bricked card and this video have helpt me even after 6 jears from launching thank you so much

So i loaded a hynix mod on a mron gpu by accident since I have more than one gpu and they are all different. Good news is the fan still spins when I turn on the PC but I do run into the “Adapter not found“ Error 0FL01. I tried the 2 monitor trick but it didn't seem to work either. My pc won't run windows either it just keep restarting the computer if I don't run it in DOS

So even with switching over to integrated graphics, when my house is plugged in the system still stays on a black screen.

@anwarscommunity6355

2 жыл бұрын

did you plug in the screen in the mother board instad of the gpu it self after doing that ?

thx a lot I had to do what you said in command prompt because I got an error but thanks so much you really saved my ass.(you get a sub and a like :D)

You sir, are a legend among men! Saved my r9 390 xoxo

@F7GOS

6 жыл бұрын

+Julian Giraldo long live the 390!

Brother i have this problem during proces-error 0FL01 adapter not found.Please help.tks

@VictorSantos-ey5zm

3 жыл бұрын

I have the same problem, did you manage to solve it?

Hello! I got an important note for everyone, if you happen to own a GPU that could have maybe different variations of the exact same brand, for example my Sapphire RX580 Nitro+ has two different variations with differing VRAM modules, make sure you find out which one is exactly yours, because different components have different BIOS settings. In case you're unsure which, feel free to look up on the internet using your exact serial number or product number on the box.

@GodSaveTheUnitedStates

2 жыл бұрын

My Gigabyte rx580 8gb gaming is just like that. Three different ram brands.

@neildiamond610

Жыл бұрын

How do I look that up?

thank you very much.it saved my winter holidays

@F7GOS

6 жыл бұрын

+Marth3791 glad to help :)

Bro you are a legend for helping us Bro I appreciate u Bro thanx.. I almost gave up on my card and u saved it🙌💯

I knew there was a way to fix my gpu using the onboard! (instead of using a double gpu mobo, as EVERYBODY SAYS). Tnxx dood! I just revived my AMD HD 6570. Easy, quick and simple to use. Best method.

the unbricking is strong with this one ! i got 2 bricks i`l unbrick them in the morning. thank you my good man !

You sir are a legend and just saved one of my 580s

@4ipon4ik

3 жыл бұрын

Why just one? Only one was bricked?

Should I plug the 8 pin connectors in as well because it does not start then even with IGP settings enabled and hdmi in the motherboard....( 2:12 )

Hi, thank you for your video. I tried your way but my computer shows “ you cannot run program in DOS mode” what should I do. Thank you

@vrushabkudchi5328

2 жыл бұрын

Did i figured it out please let tell meh

@RD-gz2tr

2 жыл бұрын

@@vrushabkudchi5328 Not yet

@vrushabkudchi5328

2 жыл бұрын

@@RD-gz2tr my gpu is not working at all idk what should i do

@Parmpita

2 жыл бұрын

You need to download dos version for the same

Thanks dude, I've revive my HD7750. Just got igpu then I can proceed😂

@Paranoidhit

5 жыл бұрын

Hansonic how did you do it I could save my 7870 can you help me

Just wanted to say thanks for uploading these instructions that helped me save 2 AMD GPU cards today.

Thank you! This saved my R7 260X GPU! You rock! =D

@F7GOS

5 жыл бұрын

Glad it helped 😂👍🏻

great video... thanks m8

At first, thanks to you. I have a question, by me it says “Adapter not found“ Error 0FL01. So what is wrong there?

@DancingGophers

6 жыл бұрын

Maximilian König i get that too

@andrespuerta6103

6 жыл бұрын

no one know how to fix it?

@RadioFlyer05

6 жыл бұрын

after hours of trouble shooting I found out you can fix it by using your integrated gpu and run atiwinflash and do shift right click to access command prompt and do "atiwinflash.exe -f -p 0 bios.rom" before you do that though make sure you have 2 monitors one plugged into your mother other into your graphics card.

@MarcABrown-tt1fp

5 жыл бұрын

Adapter not found? Anyone know what's up?

@reggiexp69

3 жыл бұрын

@@MarcABrown-tt1fp same problem here

Iam sorry i cant install atiflash.exe. i got "this program cannot be run in dos mode".can you help me

@kakazouheinou4923

5 жыл бұрын

same

@atsrasta9688

5 жыл бұрын

U downloaded the wrong atiflash, you need to download dos version not windows, there are different versions

@sebasluna7371

4 жыл бұрын

CHANGE NAME EXAMPLE: BIOSS.EXE (DO NOT PLACE .EXE JUST PUT BIOSS) SO I MADE IT WORK

I have a couple RX570 4G GPUs that have been flashed with the 8G version of the bios. When I boot up with them as display card it show me the bios boot screen, but as soon as an operating system loads the screen cuts to black. I've flashed the regular 4G version back with atiwinflash, but it still does the same thing. Could this method help or should I look elsewhere for the problem?

Finnaly i got this video. Thx so much sir

I owe you countless . you saved me and my card :D

@F7GOS

7 жыл бұрын

+CXLH glad to be of help :)

👋Can 🙏 someone help me,🙏 i cant really turn on my monitor if my r6950 and integrated cpu graphics is pluged in, so i plug my gpu only after my monitor starts working, then when i type in that "-f -p 0" part, it shows me that i have problems with adapter... Can someone help please!!!

@xnicob

4 жыл бұрын

same here. "adapter not found"

@weehong2000

4 жыл бұрын

same here "adapter not found"

@Abhilash716

4 жыл бұрын

Same here anyone got solution for this?

@williamgallan7573

2 жыл бұрын

I've got this far and am also getting "adapter not found", guessing it can't read the gpu. Odd as it shows up in windows, just doesn't want to flash anywhere!

life saver dude, bricked my 270X and this sorted it out. also gave it a clean with yor other video guide! thanks!

@F7GOS

7 жыл бұрын

No Problem ;) I guess if at least one person is helped then it was more than worthwhile making the video.

2022 this tutorial just gave life to my bricked rx 570 I was gutted couldn't afford another gpu you just saved me big time

@eternal_stoic_

2 жыл бұрын

did you had to short pins 1 and 8 of the bios chip to reflash? what version of atflash did you use? did you flash it usind DOS?

@frankfortfcgoc

2 жыл бұрын

@@eternal_stoic_ didn't short the pins, use a stock bios for your make and model from techpowerup and a USB drive was very easy

@ermalshala8383

Жыл бұрын

@@frankfortfcgoc what version of atiflash ?

@frankfortfcgoc

Жыл бұрын

@Ermal Shala can't remember just a standard version, it's not really needed just reflash the bios to stock from a techpowerup file make sure it's the exact bios that matches the card. If you need to know more let me know. Don't even think I needed to use ati flash in the end and I've flashed loads of cards in the last year. What's the issue with the gpu

I have error message: ERROR 0FL01: press '1' tout continue What is this and I van resolve it? THX

@Kebsilfer

7 жыл бұрын

I have the same error

@thomas4326

7 жыл бұрын

I went to see a repairer and he say me "the own solution it's remove the EPROM and reprogram it ~150€

@PavelPower

7 жыл бұрын

Did you ever figure this out? I get the same error.

@maykelkero5654

6 жыл бұрын

This worked for me after getting that error: Make sure you have integrated graphic turned on in bios like he shows in video. turn off computer and remove gpu. remove the usb dos stick, you don't need it. Now you should enter windows and remove all graphics drivers with the program "Display Driver Uninstaller". Now turn off computer and insert bricked gpu. if you are able to get in windows then you will be fine. Now just use the normal/new atiflash tool to flash your gpu with the old bios. then run the program "amd/ati pixel clock patcher". reboot and install amd blockchain driver.

@maykelkero5654

6 жыл бұрын

yeah it does

I got adapter not found

Thanks alot, you saved my gpu.

Can you please help me when I type atiflash.exe it says error opening flashrom.rom what did I do wrong. Please help

it says adapter not found, what should i do?

@M4G1CSKILLZ

3 жыл бұрын

I got the same issue :( were you able to fix it?

Hi guz, with "C:\>atiflash.exe -f -p 0 bios.rom" comand I get "Adapter not found" but my bricked card was already connected.

@arkeemj336

3 жыл бұрын

I am also getting the same "adapter not found " Error 0FL01 : press 1 to continue after attempting the fix.

@arkeemj336

3 жыл бұрын

Forgot to list my card info. MSI RX570 Gaming X

i am going to update my gpu and thought a backup plan might come in handy thanks

adapter not found error :'( I unlocked rx 460 to 1024 shaders now I want to revert back. any help? please

SOLUTION FOR ALL OF YOU THAT HAVE " CANNOT BE RUN IN DOS MODE" ERROR. The thing was to use an older version of atiflash.exe provided on this site www.techpowerup.com/download/ati-atiflash/ I used bios.rom that I saved (bios.rom for gpus on that site can also be used for specific cards) before I fu**ed everything up, and I re-flashed gpu bios just like in the video and it was successful, gpu is now working! Thanks F7GOS ! Peace! :)

@gucciquattro

7 жыл бұрын

so i am using nxflash so what can i do with this same issue.

@Coaxs94

7 жыл бұрын

gucciquattro Can't run in dos mode issue? If yes, try older version of the app.

@IamCraduug

7 жыл бұрын

Aleksandar Supurovic thanks! Was wondering why I couldn't flash

@csabi72

7 жыл бұрын

still can not run in dos...

When I type atiflash.exe And error command not found

@Punchmememe

5 жыл бұрын

Did you had eny Head Laters like this H

can i do the same with this atiflash ( dos version) for a vega 56 red devil ? i ve seen one on second hand for cheap with the error 43 in device manager and the guy said he could not install the drivers . So idk if this is going to work

you are awesome! fixed!

Hey this seems very helpful but i dont have integrated graphics configuration need help please

@22koga

3 жыл бұрын

he told you what to do use a pci gpu card and if laptop you have to use a clip on the chip

@dddiehard02

2 жыл бұрын

@@22koga i have a second pci express gpu, can I use that?

@hustensaftmeister

2 жыл бұрын

@@dddiehard02 i think so

what happens when you don't have an IGPU and the pci won't work while you have the bricked card installed?

@kennethcusmano

4 жыл бұрын

Bro i had to start the pc with just pci card not the pcie. Then booted and start windows. Then shut down and put im pcie card with pci still as gpu. Then when i saw graphics about to show i plughed on the power pins. Warning try not doing that at least 10 times before you do try it. And still it may not be recognized. Then i had to flash the bajesus out of it. I flashed like 3 times while still running on the pci card. Then eventually it recgonized it and i shit down took out pci card and ran off pcie and then i still flashed it like 4 more times. Boom worked for me. Good luck.

You just won the internet sir I was about to lose all hope thank you!

my sapphire AMD r9 390 detects shows no problem when integrated video used but none of its port showing any pic only black screen. what could be the problem?

I was freaking out until I forgot that my TV was off

@spl1txx

3 жыл бұрын

Lol

@averyoldYoutubeuser

Ай бұрын

Nice joke : )))

It says program can't be ran in dos mode plz help

@nuffsaidbaby5800

6 жыл бұрын

Unknown Vibbez same problem did you solve it?

@danielspartan7754

6 жыл бұрын

nuffsaid baby Make sure you select older versions and get 4.17. Had same issue but noticed when he made the usb the exe was twice the size. If you need help I can assist

@Bengzki17

6 жыл бұрын

same issue how to fix it?

@danielspartan7754

6 жыл бұрын

Mar Unknown on the left side of the page make sure you select the older version of the file. The latest versions don’t work

@Bengzki17

6 жыл бұрын

i got it but when i try to flash the backup bios it say adapter not found do you know how to fix ?

After messing with the setting in my bios when I applied the changes I got a blank screen I’m able to boot into windows or bios etc if I’m not using the graphics card. The only problem is that everything on the screen is shifted to the left

How do I boot from IGD I have a gigabyte 990fx motherboard with a Amd FX 8350 8 cores. Please help

It says adapter not found. Error 0fl01. What do i have to do?

@user-wf2ek8hz8g

4 жыл бұрын

@Lenny faZe did you figure it out?

@ARISTOCAT666

4 жыл бұрын

@@user-wf2ek8hz8g did you figure it out?same problem

@naveedhussain6309

4 жыл бұрын

@@user-wf2ek8hz8g is it resolved? Facing same error.

@naveedhussain6309

4 жыл бұрын

Facing same issue... any solution

@YoungBloodyBlud

4 жыл бұрын

www.reddit.com/r/EtherMining/comments/7qifnc/atiflash_failed_to_read_rom_error_0fl01/?

this only works if your CPU has graphics, check your CPU first

yes it worked i followed your steps thanks you have a +1 subs

@F7GOS

7 жыл бұрын

Glad to be of help! Now get back to gaming on that Fixed 270X and feel free to share the video on social media if anyone else you know needs help with their GPU

@StephenFong

7 жыл бұрын

Hi, so I bricked my RX 480 by flashing the wrong BIOS. I followed the step to change the default GPU to IGD then I tried booting with the bricked GPU but the system doesn't boot. Would you mind helping me? Thanks!

@F7GOS

7 жыл бұрын

+Music sometimes gpu overrides the IGD, there's often a setting hidden In the bios to stop that. What motherboard do you have?

@StephenFong

7 жыл бұрын

F7GOS MSI Z170-A PRO, Amazon link: amzn.to/2nPjEjo

So I don't have integrated gpu, but I have a pcie spare one and I have 2 pcie slots on my mb, so what will I type in the -p section which number if my bricked gpu is in my 2nd pcie slot ?

I bricked my RX 460 luckily i have APU from AMD.

help pls adapter not found eror

@AmitYadav786

7 жыл бұрын

any solution you found?

@kannonfrazell4628

7 жыл бұрын

Amit Yadav swap the card to the other PCIE slot. It helped me

@ventricity

6 жыл бұрын

This worked for me after getting that error: Make sure you have integrated graphic turned on in bios like he shows in video. turn off computer and remove gpu. remove the usb dos stick, you don't need it. Now you should enter windows and remove all graphics drivers with the program "Display Driver Uninstaller". Now turn off computer and insert bricked gpu. if you are able to get in windows then you will be fine. Now just use the normal/new atiflash tool to flash your gpu with the old bios. then run the program "amd/ati pixel clock patcher". reboot and install amd blockchain driver.

@RealNicsam

6 жыл бұрын

Johan Herstad THANKS MATE ur awesome. Just using display uninstaller worked perfectly for me. Ur the best!

@dominikgoluza5911

6 жыл бұрын

Johan Herstad what version of amd/ati pixel clock patcher you use,because for me it error program can't run in dos mod

This video is still relevant. Fyi the ati flash software has had alot of updates and it bricked my gpu... so i got the dos version 4.6xx amd its saved my card from death! Thanks F7GOS! Man thats the last time im upgrading gpu bios through windows

@salmanmorris4484

4 ай бұрын

Which card you saved

@MorrisChannel4

4 ай бұрын

@@salmanmorris4484 rx 580. Im still trying to get my rx6600 unbricked. 1 down 1 to go

@salmanmorris4484

4 ай бұрын

@@MorrisChannel4 i saved rx 5700 last night using same method thank God it saved my money

@MorrisChannel4

4 ай бұрын

@@salmanmorris4484 excellent

@MorrisChannel4

3 ай бұрын

@@salmanmorris4484 i had to get a programmer chip, but i got my rx6600 to work again! Took a few tries and patience but its working!

Perfect thank you very much it works with me

Adapter not found error 0FL01 press 1 to continioue??

@MinersTube

5 жыл бұрын

Same for me

@capucom3297

4 жыл бұрын

@Infinite Fairlight How do I do that?

@Trent_111

4 жыл бұрын

CapuCom it’s somewhere in your bios. You can access your bios by pressing f2 or f8 depending on your pc. But every bios is different so you can google where those options are

@Trent_111

4 жыл бұрын

CapuCom also you’re PCIe slot might not be compatible with your graphics card bc they aren’t backwards compatible

@capucom3297

4 жыл бұрын

@@Trent_111 I don't think so, I used the Rx 570 for 5 months in the motherboard I still have nowadays.

hey i did everything and i got ERROR 0FL01 PRESS 1 TO CONTINUE ????

@TehUltimateSnake

5 жыл бұрын

Darrin's Channel same here. Did you ever figure it out?

@cosminthunde

5 жыл бұрын

Same

@Mboy556

5 жыл бұрын

Darrin's Channel isn’t ATI for amd only? Do you guys have Nvidia gpu?

@lewl4566

5 жыл бұрын

@@Mboy556 I am with AMD and I still got the same error...

@Mboy556

5 жыл бұрын

@@lewl4566 ohhh well in my example I had Geforce.

My gtx 970 will boot into bios not Windows. It was prior to the latest nvidia driver update. Do you think this will work if I make the bootable usb on my laptop then go into the bios of my pc as you've described? (AMD cpu and 1 pcie slot so no other graphics options)

In my bios settings the PCI express slot shows it is unpopulated even though I even took out the card multiple times and reseated it properly and rechecked the cables. But do you think this method will not work since the card is not detected to begin with.

amdflash -i >>> NO ADAPTER detected :(

@tulza189

Жыл бұрын

Hi, did you found a fix?

@amazingright7240

Жыл бұрын

@@tulza189 try 1 instead of 0, if that doesn't work your bag bios is damaged and your card cannot be recognised

@motiongems7947

Жыл бұрын

​@@tulza189 i spend days trying every syntax on amdflash, it always show "adapter not found"

@behagaming6670

Жыл бұрын

Is there a solution?

@PizzaInGame

3 ай бұрын

Same here, and i found is because the old one 4.17 cant run at newer 64 windows And i think the newer atiflash already have fitur like in the video, without need to use DOS mode In fact they have same script and the newer one cannot run in DOS mode You just need run cmd administrator Sadly this is not fix my problem 😢 Maybe need use hive os or even reset the ic 😔

error 0FL01 ? please help

@UnBlank07

4 жыл бұрын

Same on mine

@razercloud5650

3 жыл бұрын

Same

@destruktors

3 жыл бұрын

Same s#it

@ruivarandas128

3 жыл бұрын

Please guys i have the same issue. Please.

@ruivarandas128

3 жыл бұрын

F7GOS can you help us? -f option not support in external version of the tool. ERROR 0FL01

Thank you so much for this!!!!

@F7GOS

6 жыл бұрын

+Atticus Russell glad it helped!

Thank you very much your tutorial helped me reviving my rx470 i almost lost hope

error 0FL01 what this?

i'm getting error 0fl01

@manuelhernandez2017

4 жыл бұрын

Same here, it means the adapter is not found. It doesn't detect the card at all. Hopefully someone will come in with a solution. I'm still trying

@fendtarena2893

4 жыл бұрын

Did you find any solutions?

@naveedhussain6309

4 жыл бұрын

@@manuelhernandez2017 me too bro, got any solution?

@finiamh5032

4 жыл бұрын

Check if the card is enable in device manager. If its not then enable it. If that doesnt solve your problem then your card might not be reviveable.

@fendtarena2893

4 жыл бұрын

I fixed this error. If you have a second bios on your card, boot it with the functioning bios. While in dekstop, switch to the bricked bios, flash it to the default and then restart your pc.

Hey i have ATI 4800 series 1 GB DDR 5 and i wanna change the bios or something to the HD 5000 series so i can install the new pilote that support DirectX11 can u help me ?

Thank you a lot m8 ... i did what you said and worked but inside windows didnt need to make usb boot disk