Useful vid, I'm on my second ST and noticed a rather strange sound and seemingly lack of boost and wondered (since I hadn't been bothered before) whether somebody had removed the symposer... They hadn't, but for whatever reason it doesn't make the sound that my previous one did so I'll be looking into these steps, since it's got a good 50,000+ miles on it over the other.

Good advice for the majority of us who have stock exhaust, and need the symposer to hear the boost. After cleaning it up, I suspect the symposer will work fine for a long time.

I don't even own a Focus or Fiesta ST and yet still found this very interesting!

brilliant video! I disconnected the feed pipe to see what a symposer delete, would sound like and it's unbearably quiet, after seeing people saying on higher maps (mr230) boost leaks etc and seeing your video explaining you was loosing boost and how the delete gave you more boost again, I kinda thought I'm going to need the symposer delete and suffer with the insanely quiet induction, glad to see its fixable! and isn't actually a problem. keep up the good work!

@mopman3113

7 жыл бұрын

Focus ST owner here. I had a very similar issue with my ST. I flashed with different map and found that my boost was acting weird. I did the symposer delete and things are like they should be. It was quieter in the cabin after that. But after changing out the lower engine mount and a high flow down pipe, it's got better low end sound and WOT sounds awesome.

thx a lot for this very good video, i had some problems with the symposer and boost leakage as well and did the same thing to my st, and...it worked!!! you are a legend!!!

It's very useful movie. Now I know how this stuff works. Thanks!

That's interesting a lot of people are deleting / getting rid of the symposer because it's loosing boost pressure but I guess by design it's not supposed to do that, this is another solution if you don't want to loose boost but still enjoy the sound.

Awesome , next weeks project sorted for me !

nothing wrong with my symposer but curious about how it works so thanks

I'll keep this in mind. Thanks

You're the best commentator Well Done, great video

I'm actually going to do this to my ST as it does not sound as I remember from another ST's that I've ride in or driven. Looking forward to see if there is any changes soundwise.

excellent video thanks

Well done sir, very useful video!

Thanks, i have around 58k km and i have noticed a lack of sound for a while now, gonna try this this weekend and fix this leak!!

Great video mate very interesting to learn how it works. I kinda like the sound symposer in my ST but don't like how it only activates when you put your foot down a bit. I wonder, If you make the tiny hole in the intake chamber larger, would that make the rubber vibrate more causing more sound in the cabin? I'm not an expert on this stuff just want my ST to have the cabin noise constant.

Thanks for your videos. I now know a lot more about what the symposer actually is and what it does in my ST180. Did you notice much of an audible difference when driving without a symposer? The audio on KZread makes them sound almost identical in your videos. It’s also interesting to see from your results that on some of your tests, a cleaned symposer provided higher boost pressures than the ‘Mountune Symposer Delete Kit’ Did you stick with the delete kit in the end? Hope all is well with the Mk3 RS.

Hi Have you got a video of when it was leaking for me to hear it please? Think mine may be as it has a weird sound just before the engine grunt kicks in on a 2014 focus st Thanks

Hi mate. Do i need the tape to do this? Just bought one i hate the drone tbh. Getting mp215 fitted tuesday as well

THANK YOU!!!!!!!!!!!!!!!!!!!!

Im gonna try this.

Intsalled new word😀but great video😁

@MarkCup70

5 жыл бұрын

It's always the way, final edit, watch, tweak, watch again, tweak again, repeat over and over until all is good. Upload, link to it everywhere, then realise my 11 year old daughter can spell better than I can!

that's a very dirty part, lots of fluid. good thing you have you PPE ON!

How can a fully sealed composer have different boost to a deleating kit? Both should have the same boost when the are completely sealed. In fact, the delete kit ensures constant boost, because it should never leak again like the symposer with aging rubber flaps.

Hi Mark, i have some troubles with my symposer that i would like to keep actually. I tried to clean it as you did but my problem is still there. I asked Ford to check it and they only agreed to blow some air in the tube which is going toward the windshield. Since then, something has changed. It's still not working properly but now i have some sound back around 4000 rpm at full charge. The thing is that it doesn't make this nice angry hornet sound the symposer use to do but more like the sound of a frog you squeeze with your foot haha. But at least it's the first time i see some changes. So my guess is that i have a problem specificaly with this tube. Maybe a leak, maybe a bad connection ? I was wondering, since you're the only one who made a very clear video of this system by showing us the inside and explain how it works, is there any chance you could make a video of where this tube goes exactly and how to dismount it ? From what i saw, the battery and its case need to be dismount ? But where this tube goes exactly in the windshield or the cabin ?? And of course if anyone else have an idea to help me solving this problem i take it. Just don't tell me to delete it haha EDIT : well i just realised that you're not driving a Fiesta ST anymore for quite a while...

im going to the rr day at surrey 4th march if you want my old symposer of my st?

@MarkCup70

7 жыл бұрын

That's very kind Lee! I'll be sticking with the Mountune delete kit on the 4th though...I want to be sure I have no chance of a leak anywhere. Thanks anyway!

Hi Mark. I know it's been a while since you've had your fiesta but I have a question for you. My car now had 50k miles on it and I think I have this symposer leak problem as it feels like it's losing power. I'm not sure if it's just in my head though. Thing is, I've also noticed my fuel economy gradually getting worse. Would this be a symptom of a boost leak or could it be something else? Hope you're enjoying your BMW. Awesome car BTW. Many thanks.

@MarkCup70

5 жыл бұрын

It could well be a symposer issue but also, from my experience, the hose clamps tend to work lose over time. Get yourself and angle-adjustable 7mm ratchet spanner, get under your car, and pinch all of them up. That would be the first thing I'd do.

@Ninja238

5 жыл бұрын

@@MarkCup70 awesome, thanks mate I'll have a look.

what the heck is washing up liquid? what did you use , like a dawn dish soap or a spray degreaser?

@paulharmo

7 жыл бұрын

Yes - washing up = doing the dishes. Washing up liquid is the British term for dish soap.

11:13 Are these runs in real-time, or have they been sped up? I feel like mine is slower (before and after delete kit). But I also haven't timed it. 4th gear, right?

@MarkCup70

4 жыл бұрын

Not sped up at all...and they were run in 3rd gear not 4th.

@no1unorightnow

4 жыл бұрын

@@MarkCup70 I heard you say 3rd on the video, and for some reason I still typed 4th. Go figure. Thanks for the info! Now I need to go time mine.

How much boost was you losing with the leaking symposer ?

@MarkCup70

7 жыл бұрын

1 psi or 0.07 bar...you can see my test and the results here... kzread.info/dash/bejne/h2lksah8hajOiNI.html

I know how to fix it. Delete it like every other sane person. The symposer can cause boost leaks anyways.

@diegudr

4 жыл бұрын

Yeah ultimately I would like to have an $800 cat back and symposer delete, but I can't really afford that so I will at least be able to hear something with the symposer. One day I will do the exhaust thing but I'm just too poor right now

its fake

@MarkCup70

7 жыл бұрын

What's fake?