How to fix a noisy spinning reel - Spinning reel maintenance
Тәжірибелік нұсқаулар және стиль
How to fix your noisy spinning reel. If your spinning reel makes a scraping or grinding sound all day, you may have a bad roller bearing. Hear what this sounds like and how to fix this common spinning reel problem.
On many spinning reels, especially those used in salt water, the roller bearing will begin to make a constant noise that cannot be fixed with oil or grease. Compare the sounds in this video to your reel and see if that is what is making your spinning reel noise. Most reels can be repaired with just a simple screw driver and a replacement bearing costing less than $10.
#spinningreels
#fishingreels
#fishing
Capt. Chris Myers offers saltwater light tackle and fly fishing charters one hour from Orlando and Disney. www.flatsfishingtrips.com
Please subscribe to my channel and be sure to select email notifications from the gear wheel so you will know when I upload new content
Пікірлер: 32
When you asked that first question and started reeling I yelled out yes like one of those damn tv ads😂👍🏻
Awesome tip - A BIG THANK YOU FOR THIS! I had bought a Diawa Laguna 2500 back in the early 2000's and used it a few times and it started making noise. So I put it back in the box. I toyed with it and tried oiling it over the years but never even thought of the roller - so it just has sat all these years,because it was too loud to use. The reel still made noise until today lol. I took out the roller screw and cleaned it all out in there and added a few drops of reel oil to the parts and put it back together. I put it on a rod and casted out a weight on it outdoors and reeled it back in several times and it's quiet as can be -noise is completely gone. The reel is like new! Thanks again!
@CaptChrisMyers
3 жыл бұрын
Nice!
@trevorholland5208
Жыл бұрын
do u think wd 40 will work?
I am an avid saltwater fisherman. This bearing goes bad too often. I wash off the reel but it doesn’t seem to prolong the life. I’m now starting to add a drop of oil after washing and work it in with a few reel strokes.
If not broken try some general use grease instead of oil. Worked for me
Thank you !! Awesome tip. You rock
A GINORMOUS THANK YOU for this video. I bought a Lews Smash Spinning combo back in October 2021 from BassPro Store. Didnt use it last year until March 2022. Love the Lews. Caught lots of monster bass. I started to get that “grinding” noise. I wnt back to the store, showed them a video of the issue, and they were not sure if the gears were bad or if i had gotten birdnested and had fragments of line inside the housing. Lo abd behold! Your vid pinpointed the issue. Kinda mad that for a new combo rod n reel, this happened. But i was able to oil the bearing and noise went away. Will definitely buy the bearing from Lews. Thank you. Edgar from Illinois.
@trevorholland5208
Жыл бұрын
do you think wd 40 would work?
@CaptChrisMyers
Жыл бұрын
once it starts making that noise, no amount of spray will stop it.
@trevorholland5208
Жыл бұрын
@@CaptChrisMyers i didn’t know because it’s on a brand new reel and i figured some reel oil would work but i don’t have any so i didn’t know if any other type of oil would.
Thank You!!!!!! I have been plagued with is problem. My roller spins freely so looked elsewhere for the noise but this is likely the problem.
@CaptChrisMyers
11 ай бұрын
Even the nosiest ones seem to have little issue spinning. It is amazing they can make so much noise.
thank you for giving me the problem however i didn’t get the solution, all i did was scrape out all that crust put it in wd 40 then add reel oil
@CaptChrisMyers
Жыл бұрын
Once that bearing starts making noise. no amount of cleaning or lube will stop it. You must replace the bearing.
Recently bought new bearings and plastic washers, replaced them but didn’t oil or grease them could applying grease or oil be the solution? But would that not affect the plastic washer but causing buildup of gunk?
@CaptChrisMyers
10 ай бұрын
All reel bearing should at least have oil. Grease is good for saltwater or heavy use. Never heard of too much being an issue.
my reel makes a kind of shwee shwee shwee noise but like it only does it when passing through a certain part of the range of the handle. any thoughts? it is great otherwise. it just bugs me its also not in the roller. I think the gears might be slightly corroded or something
@CaptChrisMyers
3 жыл бұрын
Sorry, can't diagnose that one.
@mileshardin6906
3 жыл бұрын
@@CaptChrisMyers thanks anyways. I would post a video or something but I am not gonna bc I dont have the reel with me rn
👍
hey i JUST got a new reel and I have this problem, with no use at all
@owenjohnston3541
3 жыл бұрын
Same here
@mil7789
Жыл бұрын
@supguys2768did you fix it because same here
@jacobmcvay123
25 күн бұрын
Was it a Penn? Cause mine was a Penn Spinfisher VII 3500. Never had an issue on a Daiwa or a Shimano. First Penn may be my last. I literally lined it the day before 4th of July this year (2024) and thing is literally already too annoying to use. I just keep setting down and using my old trusty Daiwa BG set up. Taking it into a fishing store today. They may laugh me out of there.
Where would I buy a replacement for a Daiwa Bg 4000?
@CaptChrisMyers
11 ай бұрын
I would call diawa directly
Why make the same noise even with no line
I can't undo the screw! It's stuck on!
@CaptChrisMyers
7 ай бұрын
I have had that issue in the past. Now you know why the bearing is making noise.
Maybe I’m just trying to justify me not catching any fish, but could this extra noise and vibration scare fish away?
@CaptChrisMyers
Жыл бұрын
Those would have to be some ultra spooky fish in some very calm water i would think