Picked the gator off eBay for £2.99 a lot cheaper than Honda or second hand ones off a type R. Music by Joakim karud Dreams
Жүктеу.....
Пікірлер: 23
@DangeRVyRRuS6 жыл бұрын
YOU DON'T EVEN KNOW HOW HAPPY I AM THAT I FOUND OUT YOUR VIDEO GOD BLESS YOU MAN I've been looking for days already for something like this : if I can put a gator on my honda civic hatchback ( meaning a car that doesn't naturally come with one). Thank you so much. I sometimes eat in the car( which I hate but can't help) because of long journeys and I was getting quite concerned about the fact that I had no boot to protect the gears. Thanks again
@gerritkolthof27733 жыл бұрын
Thanks for the great video's of the mk8 civic
@seanybzebra2 жыл бұрын
Just installed mine looks mint. Thanks for the vid 👍🏽
@slicer19523 жыл бұрын
Thank you for this video I always hated the way it looked before so i got one from China and now it looks so much better so thanks again for this idea
@Alex79DАй бұрын
Thanks dude I will be doing this!
@feefeee6 жыл бұрын
So I don't have have to take off the trum if all i want to do is remove the knob? Thanks.
@SiCrewe5 ай бұрын
FWIW, fitting a Type R gear-stick surround/gaiter to other Civics is a pretty big job because the plastic collar for the "ball" gets in the way. You need to remove the centre-console to get access to the shifter mechanism and then unbolt the plastic collar before the surround will fit. Honestly, the Type R gaiter looks/fits MUCH better than a DIY job but it's up to the owner whether it's worth the effort.
@alphatrion10010 ай бұрын
I got a suède one of these. I used an old creditcard to push it under the trim. Removing the gear knob was enough.
@MissionKid11 ай бұрын
Do you have to glue it? I tucked it in without glue let’s see if it stays out the plastic bit should hold that leather down
@TheOne-po8bn7 жыл бұрын
Thank you
@Cjrelectrical
7 жыл бұрын
+Emile Heskey that's fine , hope it helps .
@ThePassandgoaway6 жыл бұрын
can i twist off the gear stick and replace it with a different design one? i hate the one in my civic , thanks
@Cjrelectrical
6 жыл бұрын
Yes definitely
@Cjrelectrical
6 жыл бұрын
Just the knob not the whole stick I might add
@dominicbritt5 жыл бұрын
Any idea where to get one of these lock nuts? Size spec?
@Cjrelectrical
5 жыл бұрын
Yes it’s just an m10 nut
@trevzbigman6 жыл бұрын
Where did you get that bit from as my gear stick doesn't have one of those ?
@Cjrelectrical
6 жыл бұрын
Which bit ?
@Janpva.2 жыл бұрын
ghetto fabulous
@proksmaster5 жыл бұрын
it was nice the way it was...now it just looks bad. it looks like any other vw, seat, Skoda,etc. congrats u made it worst.
@HarambeHonda2 жыл бұрын
Gator slides up and down the shaft, cable tying is not effective enough. Gator itself that I bought is poor quality, tore it off after one journey. Just leave it stock.
Пікірлер: 23
YOU DON'T EVEN KNOW HOW HAPPY I AM THAT I FOUND OUT YOUR VIDEO GOD BLESS YOU MAN I've been looking for days already for something like this : if I can put a gator on my honda civic hatchback ( meaning a car that doesn't naturally come with one). Thank you so much. I sometimes eat in the car( which I hate but can't help) because of long journeys and I was getting quite concerned about the fact that I had no boot to protect the gears. Thanks again
Thanks for the great video's of the mk8 civic
Just installed mine looks mint. Thanks for the vid 👍🏽
Thank you for this video I always hated the way it looked before so i got one from China and now it looks so much better so thanks again for this idea
Thanks dude I will be doing this!
So I don't have have to take off the trum if all i want to do is remove the knob? Thanks.
FWIW, fitting a Type R gear-stick surround/gaiter to other Civics is a pretty big job because the plastic collar for the "ball" gets in the way. You need to remove the centre-console to get access to the shifter mechanism and then unbolt the plastic collar before the surround will fit. Honestly, the Type R gaiter looks/fits MUCH better than a DIY job but it's up to the owner whether it's worth the effort.
I got a suède one of these. I used an old creditcard to push it under the trim. Removing the gear knob was enough.
Do you have to glue it? I tucked it in without glue let’s see if it stays out the plastic bit should hold that leather down
Thank you
@Cjrelectrical
7 жыл бұрын
+Emile Heskey that's fine , hope it helps .
can i twist off the gear stick and replace it with a different design one? i hate the one in my civic , thanks
@Cjrelectrical
6 жыл бұрын
Yes definitely
@Cjrelectrical
6 жыл бұрын
Just the knob not the whole stick I might add
Any idea where to get one of these lock nuts? Size spec?
@Cjrelectrical
5 жыл бұрын
Yes it’s just an m10 nut
Where did you get that bit from as my gear stick doesn't have one of those ?
@Cjrelectrical
6 жыл бұрын
Which bit ?
ghetto fabulous
it was nice the way it was...now it just looks bad. it looks like any other vw, seat, Skoda,etc. congrats u made it worst.
Gator slides up and down the shaft, cable tying is not effective enough. Gator itself that I bought is poor quality, tore it off after one journey. Just leave it stock.
WOW! Mountain out of a MOLE HILL.😂
You literally say literally too much. 😁