Awesome video, you convinced me to do the maintenance my self ! Cheers

Best video I’ve seen on this procedure 10/10 👍🏻🙂

@HOWTODIYwithEddy

2 жыл бұрын

thank you

Very nice Joe thank you for you better thanks

Ilove your videos eddy. I would honestly try without the music, alot of people like to hear the actual sounds of the job. Try your next video out and see 👍🏼👍🏼👍🏼👍🏼

@benjaminrich9396

Жыл бұрын

I agree. Superb video, but the music adds nothing and if anything 'cheapens' it.

@HOWTODIYwithEddy

4 ай бұрын

I will try soon, thank you

Good job well done

You were wanderfull👏🏼👏🏼👏🏼👏🏼

@HOWTODIYwithEddy

Жыл бұрын

Thank you

Not picking faults here but just a tip also. The crank tool,you use last after the old belt has been removed as you're adding more work than necessary having to take it off again you can then tweak the BDC if necessary as most people use the marks method over time which when 3 belt changes have been made can add to errors. when its bang on the engine will purr

@HOWTODIYwithEddy

Жыл бұрын

Yes, thank you 😊

Good job

@HOWTODIYwithEddy

2 жыл бұрын

Thanks

Great video and thanks for taking the time to make it. Can you tell me where to buy the tool kit to lock up the engine. Thanks in advance?

@HOWTODIYwithEddy

Жыл бұрын

Ebay, has good price on timing tools

Why on earth did you fit the crank locking tool before taking the old belt off and putting the new one in position?

Is there much difference between a 2014 eco flex engine and this?

thank you

@HOWTODIYwithEddy

Жыл бұрын

You're welcome

Have 65 plate mk1 with B20dth engine is it very different from A20dth?

I am totally screwed up by not having locked cam first and moved crank once belt was off I have now locked cams and crank is oss slightly so bottom plate will not align can crank be turned backwards to align once cams are locked

Good video my guy. No need for locking tools though. The new belt has massive white lines on it that you line up with the markings on the pulleys. I can see them on the belt you have here but you didn't use them. Still a decent video though.

@HOWTODIYwithEddy

Жыл бұрын

Thanks for the info

@GraveCareMaintenanceServices

Жыл бұрын

Those lines may not be on the belt thats coming off ( yes they are on the belt in the video, but some people take the belt off and reuse it, it that belt does not have the white lines on ( lots of manufacturers belts do not ) then you do need the locking kit to prevent damage. But you are correct about a belt with the lines on.

Hi mate can you check if my insignia needs a belt change just bought it 92000 miles looked at belt and seems ok from top is the an away to check online! Also were did you buy the kit?

@HOWTODIYwithEddy

21 күн бұрын

I bought it in general traffic, only with reg I can see what milage needs to be changed as I only have autodata online

can do these in 40 mins no need to take the wheel off just a few clips for the arch liner

Will this be the same on a 2015 insignia 2.0 Diesel? If so then i will use this video to attempt it 🙂

@HOWTODIYwithEddy

Жыл бұрын

Thanks

Hi can you post a link to the timing tool kit you used please? Thanks

@HOWTODIYwithEddy

2 жыл бұрын

www.ebay.co.uk/itm/Vauxhall-Opel-Insignia-2-0-CDTi-Diesel-Engine-Camshaft-Crankshaft-Timing-Tool-/324495073809?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

Bro how did you adjust tensioner marking point you did not show how to adjust that tensioner.how did you put tension on to timing belt

@GAH4444

3 ай бұрын

You get a bolt in the kit to lever off the tensioner to the left hand side. Also he didn't tension the belt correctly. The tensioner pointer should point at the drilled hole just above the locating slot for correct tension.

👌

@HOWTODIYwithEddy

3 ай бұрын

Thank you

Do you apply the same elaborate techinque as on a 3 wheeled child's scooter?

@HOWTODIYwithEddy

5 ай бұрын

Hahahahhaha ;-)

How come you never renewed the tensioner locating bolt behind the the plate?

@funkymonkey1968

Жыл бұрын

Is it possible to replace these? Thinking of DIYing mine and worry about shearing this..

I have a Vauxhall Insignia 2009 and it has done around 140,000 and lost the service book. How can I check if timing belt was changed OR how to check that if the Timing belt needs replacing?

@HOWTODIYwithEddy

Жыл бұрын

send me your reg for my email and i will give you the info eduardo_pinheiro@hotmail.co.uk

@Tahsin_Hussain

Жыл бұрын

@@HOWTODIYwithEddy Thanks, I emailed you

I watched the video and I saw white lines on the belt and when you rotated it the white lines didn’t seem to line up with the timing marks

@HOWTODIYwithEddy

2 ай бұрын

White line is for reference, once you rotate the full cycle ,do the locking and they have to match as shown in the video

Hi where did you get the locking tool from please ?

@HOWTODIYwithEddy

4 ай бұрын

I bought from ebay long time ago

@LR180

4 ай бұрын

@@HOWTODIYwithEddy found it now. Thank you

How much would this job cost n UK on exactly same car please???

@HOWTODIYwithEddy

4 ай бұрын

It could be around £600 with a timing kit, but the price depends on garages

@darrenbeechall1830

4 ай бұрын

@@HOWTODIYwithEddy £450 got it for cheers gor content 👌 👍

Where is the best jacking point under the engine please ?

@HOWTODIYwithEddy

5 ай бұрын

Under the gearbox side

@stevelake9333

5 ай бұрын

@HOWTODIYwithEddy Thanks for the response, is it passenger or driver side ? I've not had a good poke around the engine yet as I've only had the car 3 weeks

Can you help me im från sweden ihave imsignia 16 170hp

@HOWTODIYwithEddy

Жыл бұрын

What's up with car

Need a help with my car. It wouldn’t start and making cranky noise.

@HOWTODIYwithEddy

Жыл бұрын

Usually if is out of timing, a diagnostic with a machine will tell, because the crank and cam sensors will not be sincronized

@HOWTODIYwithEddy

Жыл бұрын

But could be so many things, need a physical diagnostic

Read a lot of bad things about these engines online. Looking around there don't appear to be many of these left on the road..

@garyhowe88

7 ай бұрын

What are you talking about, there's so many insignia still on the road 😅

@cgavin1

7 ай бұрын

@@garyhowe88 Not the MK1s mate. They WILL die at ~10 years/100k if you don't change that oil pump. Most people don't change their oil or use crap oil which greatly accelerates that process.

@garyhowe88

7 ай бұрын

@cgavin1 163k on mine currently 2010 🤣 I literally see atleast 3 or 4 everyday while commuting, biggest issue I've had is having to change the flywheel twice in that time.

@HOWTODIYwithEddy

6 ай бұрын

Yes is true

@KawasakiVersys-bt8cc

4 ай бұрын

I have an Astra 2.0 CDTI with 245000 km, still ok. Problèmes with egr valve and dof, but eady to clean... Powerful 165 HP, on the second market, the opel CDTI are not appréciated and have lowest prices compare to tdi. I have to Say that i use total excellent for thé diesel and a good dexos 2 oil each 15000 20000k.

ditch the special tools buy some tippex much cheaper

@HOWTODIYwithEddy

6 ай бұрын

Yes it cheaper

@stevelake9333

5 ай бұрын

I was thinking of using tippex, so it is possible to do without buying a locking tool ?

@eduardopinheiro644

5 ай бұрын

@stevelake9333 always the safest way is using the appropriate tools, is my advise

@stevelake9333

5 ай бұрын

@@eduardopinheiro644 thanks for the response, I've seen a couple of videos today using tippex as markers , yours is the first I've seen using the tool

What a long winded video. Dragged it out a. Little bit!!! No need!!!