How To Cut And Trim Vinyl Wrap. Cutting And Trimming Techniques
Автокөліктер мен көлік құралдары
Sign up at www.ckwraps.com/ for EXCLUSIVE content and access to our location and discussion forums!
Check out the product here on Amazon: amzn.to/2l10y9S
This video was done by request. Many of you ask how to cut and trim so I hope this helps.
Subscribe to our mailing list at www.ckwrapstoronto.com
Register for certified workshops here
www.vvividhq.com/get-certified
Get Light Smoke Headlight Tint Here
amzn.to/2LHgn4w
Flexible Magnetic Tape Measure Here
amzn.to/2ORwKdk
Get The Squeegee Here
amzn.to/2NZfy5s
Certified Training visit
www.vvividhq.com/get-certified
Get 3m Knifeless Tape here amzn.to/2K7H69J
Get my heat gun here from Amazon amzn.to/2MpqJ6C
Get my magnets here from Amazon amzn.to/2y4MSUM
Get my knife here from Amazon amzn.to/2LNufqm
Get my wrap gloves here amzn.to/2MqO07Y
Get Vvivid Shield Guard here amzn.to/2MmMOm4
Get Vvivid air release tool here amzn.to/2MgAseq
Get Monkey Strip felt buffers here 5 pack amzn.to/2JNXbkC
Get Monkey Strip felt buffers here 50 pack amzn.to/2JztSTJ
Пікірлер: 253
This might be the most helpful video on wrapping on KZread
So good to see a serious guy talk you through serious work without a bunch of jabbery nonsense.
@neu1113
3 жыл бұрын
All detailed and all pro. I've check out a lot of other videos from other youtubers and by far your videos are the most detailed, pro, no nonsense videos. Not to mention, the camera angles are awesome..its the best that I ve came across with on youtube. I think it's really gonna help me on my upcoming projects. Much thanks n appreciation from all your time and efforts to share this " a must " demonstration for guys like me that"s learning this kind of trade. Just food for thought though, it wouldn't be a bad idea if you can get your subscribers to pitch in a little little something for your demos. I mean, I'm down! It actually helped me a lot. Big ups to ya sir
Thanks for these. Learning a lot.
Thank you. You're a natural teacher.
Awesome job as always. You make it look so easy. I have been practicing on my door handles while mounted, I do have some fingering, and I will try again and again. I did my round gas tank cap with very little heat, pretty proud of how it all turned out. Mostly from watching you.
You're a BEAST!! Thank you for your knowledge, I am learning a lot!
I can't even express enough what your skills have brought to my suv! All these pointers gave me a newfound hobby during this pandemic. I'm constantly brushing up my skills by removing and redoing. But, all worth it. Thanks man. Sending you some straight Cali love. ✌🏼
Thanks to your vids I was able to do my 435i with the dry film, even was able to cut around my carbon fiber eyelids with some knifeless tape, it came out really good.
The whole time I’ve been watching you trying to figure out how far you take it underneath the vehicle. I always wrap far under and it take me a long time. I’ve gotten all of my learning from your videos. Thank you. Your the best hands down. Much love from Atlanta
Dude I wish I could just hang with you for a week and pick ur brain like crazy ur super talented bro I watch all ur vids I want to learn to do this soooooooo bad
One thing is that you are precise ! You do great job . This is a good reputation to have .
Your videos are a pleasure to watch and I appreciate you taking time to explain your craft.
A man who works with his hands, his head & his heart is an Artist. well done.
Appreciate you taking taking the time to make these videos helping alot 👍
Excellent video Chris, exactly what I was hoping to see. Looking forward to the second video. Another video that I hope to see is when things go sideways meaning I messed up the cut. Obviously redoing the entire section again is an option but wonder is there anyway to save it without using more vinyl than we can afford. Thanks again well done.
Thanks for the video. I wrapped my interior in my RR sport
Flawless work brother!
Your are Pro men!! Thanks for the tutorials.
very good professional!!! congratulations..
I remember how i was told to practice my Cutting, blow up Balloons and put wrap films on them, then cut the vinyl without popping the Balloon, pop it and you know you would have hit paint. Deff helped me
@user-vz3uf8us7f
2 жыл бұрын
Gonna try this lol thanks
Very clean wrap job as always
Your work is incredible ,cogratulations and greetings from Mexico!!!!!
Top job mate, i would definitely trust my car/bike/helmet to you!
A true pro☝️. Makes it look easy.👌
Very interesting, thank you for explaining!
Really helpful video I'm wrapping my nismo 350z next week!!
Christian makes it seem so east! Greatful for your videos!
Dude thank you so much for sharing your knowledge
Good videos bro!!!! Keep em coming.
Solid work and informative tips. Thanks brotha
Bloody well done mate bloody well done that's an excellent video thank you
@illhaveanother4365
Жыл бұрын
Goodeyemight
wow.. this is a work of art !!👌👌
thanks.. i jst spent 1k today and starting my wrap next week! you've inspired me to get this wrap game going!
@nasigeo2790
4 жыл бұрын
Chucky Wright hows the wrap? What brand dis you use
Awesome video!! Impeccably filmed and explained, and the final result is great 👏👏👏
Love your videos you are the best teacher
Seems like you’re the only one who has work at that shop. Hopefully you get your own shop again one day!
@thedbq1
5 жыл бұрын
hahaha
NICE WORK
Having your missus on the camera for close up work makes the world of difference for us. It's good when we can see exactly what you're pointing out zoomed in.
Amazing content. Thank you!!!!
Super clean 👍💯💯
Awesome video, cheers!
Man do you have some steady hands lol. This is an art! Great video -- going to try doing a much smaller project (reflectors) on my car.
Love your work bro 👊
Thanks for giving secret things about wraping
So clean!!!
Very good work This is my job so I and I love this job from my heart and my dream to find someone who loves this work and my dream to find work in this area and in a country outside my country to reveal my skills and develop a job well done and encourage you to this job well done
Nice job!
Thanks for your vids ck
Great job!!!
Good stuff man.
Chris. you said in a later video (the bad wrap ml300 merc i believe) that installers in the industry say you destroy the industry with you guide videos etc. id say, if every installer checked your videos, bad wraps wouldnt be an issue :D and as you said, things do happen to a wrap that one cant really control etc.
Awesome. Thanks man!
Christian you sure you’re not a surgeon? Those cuts are solid man!
@CKWraps
6 жыл бұрын
Being a surgeon would've been easier 😂
@paddug861
4 жыл бұрын
How to past edages, after pasting it is coming out
@d7eemo270
3 жыл бұрын
@@CKWraps lol i'm an intern trust me u are close enough haha. jk :P
@Brudets
3 жыл бұрын
Dr.vinyl surgeon :D
Nice Work Appreciate it 👍💪
Great Quality video and great AUDIO! Love that you have a mic, thanks for taking time to do these videos. started wrapping my CT200h last night.
Can you do a tutorial on how to wrap a three-way corner? In some dash trim I've been finding three and sometimes four-way corners where you have a 90° angle but then there's a lip if that makes sense and I always end up getting a lot of creases. Thanks and love your videos
Have you ever done a powerpole blade on a boat? They have a lot of circle holes in them and look difficult. Looks like you are the vinyl master!
Thanks for the great video!!! I have watch a bunch. have you done any classic cars? I have a 41plymouth and I want to try chrome on the headlights, is that possible? thanks again. Enrique
Dude, you are an artist. Wish you were in Houston
Good work
You are the best!!! From Roma
Verry verry hard & creative work, Thanks for ur shearing this wanderfull vidio, so much lurning, With lots of LOVE I'm VISHWAS from INDIA.
very professional
Christian, have you worked with any of the Xpel pre-cut paint protection kits? I've only seen you do full custom wraps. I'm wondering if I ask them to extend the edges of the pre-cut, if I tuck it and trim the edges like you do in the video, will the edges still adhere well. It's different from vinyl wrap because you aren't using slip/tack solutions. Thanks.
With such precision and attention to detail, on the contrary you could have become a surgeon, post med school.
Perfect job sir......
Love your videos. Camera guy needs work but other than that, best wrap videos on KZread imo.
Christian, loved this video, do you have a link to more please, do you have a website too.
Ck the goat 🐐
Thanks teach.🤓👍
Man you are good that’s all I can say!Do you put tape underneath the inlay to keep from cutting into the paint?
This guy is good.
Yes sir now a days we also doing in same way 👍🏻👍🏻
What advice could anyone give about wrapping something like, for example, the side vents on an MR2?
Christian you are solid! How many days or hours took you to wrap the whole vehicle? And you did it solo? Do you use any primer or sealer for those critical parts?
You should really invest into some knee blades. They will help you a lot. Best tool in my shop.
nice!!. thanks bruh
Please do a vid on parking sensors🙏🏼
Any videos or recommendations for doing a truck cab between the bed and cab , on how to tuck without removing the whole bed?
Good Job..
hey christian could you do a video on wrapping a wheel with deep inlays?
Definitely Crisp... When your coming up with reasons for doing things and it's the same word that popped into my head a second prior i know we're on the same page. Thanks for the share...
How do you do wrap the really tight fastener divets like on aftermarket fender flares?
Hey "ck" where can i get that Vvivid tape from. I dont see on amazon or ebay. Is it on Vvivid vinyl shop. I love vvivid products. Please let me know.
So pro!!
Master!!
Thanks 🙏
BRAVO 👏
always wondered if you could actually wrap something like a model rocket with a nose cone and also how you would do the rear fins of a rocket?
I am wrapping my Leon mk2 the weekend. And doing the wrap myself in Matt black oracal. I've ordered 20mtr x 1500 cost me 400 quid wish me luck......
So can you use the 3m cutting tape on the curves instead of using the blade?
Specific question regarding parking sensors, how do you go about those and does the film not block the sensors function? I know that if you paint sensors with too many layers they can't "see" through anymore so was wondering how the film does in that regard.
@stephenchampey9415
5 жыл бұрын
Howler good question I was going to ask the same thing.
Very cool
It's a perfect very nice 👍
hello... could you tell me what is that white paper that covers the car headlights to protect it ? what is the name of that?
Can you please demonstrate how to wrap a trunk with a spoiler glued to it? How to approach it, how to split it and where to start?
thank you sir
You are my Mr. Miagi 🥋
Thanks, Sir
Top quality