Yes, you did pretty good. Years ago, I use to mount flexible printing plates on big cylinders using "sticky back." I'd start on one end and get the sticky back mounted straight, and then remove the vinyl backing as I went along. Work the sticky back with your fingers, then pull the backing off. Keeps the bubbles and creases out easier. If you did it a lot, you'd get good at it. Your probably thinking to yourself "why am I doing this, it's a pain!" I'd put a coating over it to keep edges from peeling up. Good video, good job. Hi wife.

Thanks everyone 4K Subscribe

I think that came out really nice, especially for your first time 👍😁

That looked really nice! Relief cuts definitely will help👍

very nice sir I m from India and you

Great video Phil definitively have more patience than me. End result looks good ,definitely worth learning.

"I don't do this professionally" That's an understatement.

@MirandaDetailing

6 күн бұрын

🤣🤣🤣

Well done man. Good job ❤

@MirandaDetailing

5 ай бұрын

Thanks!

Pretty nice job for the first time Phil. I tried something similar once & I sealed those cut edges with a tiny amount of Krazy glue. I laughed after some time everything started to slightly peel except for the glued edges.Haha!

@chadsimmons6347

Жыл бұрын

painting slick plastic can become a disaster without lots of expensive equipment, im hoping the wrap will succeed

Going to order some tonight for my Honda. Very good video, sir

@MirandaDetailing

Жыл бұрын

Thanks man!

👍🏽good job

Nice job for your first try! For the holes you cut in the middle, make incisions in middle first in order to release the tension. Then you can cut out the edges easily

@MirandaDetailing

14 күн бұрын

Thanks! Great tips. I’ll have to do that next time I wrap anything.

I'm going to attempt this same exact process with high gloss 7d carbon fiber wrap on my 2002 Yamaha Waverunner GP 1200 R similar lid of the front. All sun damaged

@MirandaDetailing

8 күн бұрын

Awesome! Hope it goes well man! kzread.info/dash/bejne/ZJ2oysqcZpO1qbw.html

Good job!!

@MirandaDetailing

10 ай бұрын

Thanks!

Hey Phil great job for being the first time doing it 👍.

@ismaelcarrerojr7124

Жыл бұрын

That film was too ridged but you still manage to manipulate it,I can't wait to see you work with PPF that's more flex and stretchy.

@MirandaDetailing

Жыл бұрын

Hi. That’s the way vinyl wraps are. Once heated them become very stretchy and malleable, that way when stretching around edges and corners they cool to their original stiffness and really stay in place. At least that’s what I have learned recently. From what I have learned ppf seems less forgiving when being stretched. But there are so many different types of vinyl and ppf. Each has a learning curve. But overall this vinyl is cool stuff!!

Okay I now realize that I ordered the "sticky back" for my car. I didn't realize the difference. I'm hoping I won't have to use the heat gun for my purposes but I will have all tools & gun ready to go, thank you great video and great job 😃👍.

@MirandaDetailing

Ай бұрын

Thanks!

U did great only thing I would of done when it came to the vent is cut a slit down the middle and folded those end over in the inside the trim that but overall great job

@MirandaDetailing

Ай бұрын

Hi. Thanks. Oh good idea! I’ll have to remember that for next time. 😎👍🏼

Im gonna wrap my Bigniu BGX ebike👍🏽

@MirandaDetailing

29 күн бұрын

Cool!

You seemed to fight with it, for quite a while, but the finished product looks really good ! 👍

@MirandaDetailing

22 күн бұрын

Oh yeah. Like I mentioned I’m no expert wrapper. Just learn ing as I go along.

Hi, I want to wrap my car grill. Do you have any tips? The bits are small and I don’t really know how to do it. Keep up the great content 😊

@MirandaDetailing

Жыл бұрын

Hi. Oh i'm not sure yet...I have only ever wrapped these atv's. I haven't tried on a vehicle yet.

For the interior are there any products that can be used as a all in one that will clean and protect ? Where I used to work they would use a dressing for everything but wouldn’t clean dirt well, I like to use a interior cleaner and cleans well but takes forever and adding dressing after takes crazy amount of time , any advice is appreciated thanks

@MirandaDetailing

Жыл бұрын

So we have used this before and its great to clean nd condition. But its not a heavy duty cleaner. If the vehicle is not that bad use this amzn.to/420lEIR

Try adhesive promoter around edges

@MirandaDetailing

Жыл бұрын

Yes I got some for the atv fenders.

Wondering if you could lacquer over that to make it more permanent ?

@MirandaDetailing

16 күн бұрын

Not sure. With atv plastics they flex and bend a lot and lacquer or clear coat could crack and chip over time. So gas this wrap has held yup really well. Plus if it starts to peel or gets damaged I can just peel it off and redo it.

This is a lot easier to do with a helper

@MirandaDetailing

27 күн бұрын

Very true

easy piece, beautiful flat space..Im breaking my head on a jeep rear mirror..good job anyway)😊

@MirandaDetailing

4 ай бұрын

Yeah this piece was. But the rest was a headache! 😅 kzread.info/dash/bejne/ZJ2oysqcZpO1qbw.html

Ever thought about doing hydro dipping?

@MirandaDetailing

Жыл бұрын

That would be awesome if I had the tools for it!

I've been hard modding xbox 360's and I got a few for $10 per. Plastics are scuffed up. Hoping to wrap them with some of this stuff to make them look better for resale.

@MirandaDetailing

Ай бұрын

That will be awesome!! It should work!

Would using soap or windex work well? Like window tint?

@MirandaDetailing

Жыл бұрын

Hi. I’ve tried that before but vinyl needs a dry install to be able to stretch and cling properly.

How durable is this stuff against light scratches etc?

@MirandaDetailing

Жыл бұрын

Very durable! I rode this and washed it twice with my pressure washer and it’s still looking awesome.

Hi does it makes any stronger ?

@MirandaDetailing

4 ай бұрын

Hi. Do you mean does it make the plastics stronger? If so, no it doesnt. its just for looks. but it does protect the platics form minor scratches which is good.

Subscribed I want to wrap my 500 as well

@MirandaDetailing

Жыл бұрын

I will be wrapping my black Scrambler 500 soon!

How long does Glossome last?

@MirandaDetailing

Жыл бұрын

6-9 months if properly maintained

Whoo hoo Mr Phil…You killed it Sir. Your talents grow….

Tony Stark showing us wrapping his next suit.

never heat it while it’s still on the backing paper man. that activates the adhesive and sticks, potentially won’t hold as long as it would if you didn’t heat.

@MirandaDetailing

8 ай бұрын

Thanks! Good tip! 😎👍🏼

@mudza92

Ай бұрын

Exactly! And you don't need to use just a little bit of heat to shrink. You have to heat up the whole thing, that's the only way to fully activate adhesive if you want it to last for long time.

Split the middle of that cut and wrap the edges

@MirandaDetailing

Жыл бұрын

Sorry I don’t know what you mean…what exactly should I do?

@mattsilva6592

Жыл бұрын

Cut the directly in the middle of the little slots and then heat and wrap the edges of the slots.

Why would you make a "how to wrap" video if your not an expert?

@MirandaDetailing

Ай бұрын

🤣 Why not? One does not have to be an expert to share their experiences.

Hi . I tried to send you an email but gmail said it failed, something wrong with the address, where can I contact you ? I have a question regarding ceramic coatings, need a help . thx

@MirandaDetailing

Жыл бұрын

Hi. Oh that’s strange. here’s my email mirandadetailing@gmail.com Where did you get my other email that failed?

YOU DO REALISE THERES A CLEAR FILM ON THE FRONT OF THE WRAP YOU NEED TO TAKE OFF BRO

@MirandaDetailing

Ай бұрын

Hi. You mean on this carbon fiber wrap? If so, it’s not on this one. Some do, but jot this one. I made sure of it.

@BoSs0nE01

Ай бұрын

@MirandaDetailing my apologies bro my bad I've just wrapt mine and thought it was the same wrap 😅

@MirandaDetailing

Ай бұрын

@BoSs0nE01 no worries man. 😎👍🏼