Such an informative video! It's good that you used simple hacks and included ones which were more complex, too. Keep up the good work!

5 methods over 8 minutes averages out at 1.36 per method. Brilliant. Whilst there are some other good non-verbal glass cutting demos on this site, none come close to this one. Sadly as is often the case on KZread, other videos have 10 minutes of introduction for 10 seconds of demo. Great work. I'm definilty going to try some of these methods.

Goodbye candle...great vid. Got a whole bunch of bottles just waiting for this. Thanx for uploading.

Now we need a video on the best ways to smooth the cut edges. 👍

Underated.Very good video Thank You.

You have some really good ideas for cutting glass! I like the string idea wrap it 3 times and keep pulling for 2 minutes!

@projectmayhemUK

4 жыл бұрын

string was one of the worst ones

awesome video you’re a real artist kid

Definitely going to try some of these. New Subscriber. Thanks for sharing

Thanks for showing it all!

It's amazing, very creative, well done

Very nice and clean. Thanks for sharing.

Brilliant video fella

Bad ass vid! Thx for sharing and your very very resourceful..

Really helpful man, thanks

Amazing Video - Thanks for sharing

It's so nice that you speed it up so we don't have to watch so much useless footage waiting on the process. I wish more video people would take that into account.

I think the candle and the ice cube was the most homemade and effective sollution

@balsalmalberto8086

Күн бұрын

You need glass cutter to score the line first. not mentioned in this stupid video.

I am so impressed. Wow, I want to go out and dig bottles out of the local bar trash. Friday night entertainment! Thanks.

Very useful ideas. Thanks.

Clear and concise

Very nice work, thank you. Is there a specific name for the wheel use used on the dremel unit?

EXCELENTE VIDEO BRO !!!

That's brilliant!

Excelente video. Felicitaciones!!!!!!!!!!

The bottles serial killer 😈🍾

"After about 2 minutes of vigorous rubbing dunk in cold water"

excellent video

complete tips..awesome

So I wanted to cut a bottle lengthwise what would you say the best method would be, dremel ??

wow great!!!! i think i will test the candle and ice one.

you are the tiger ... good job

Oh, you did a nice tasting (I'm thinking not only about cutting glass);) But the ways are great, thanks for this video. I will also test glass cutting and all these methods.

Great ideas, thank you sir

El mejor video de como se deben cortar botellas !!!!

Excelentes métodos, muchas gracias. Muy buenos, hay que tener cuidado con el fuego y el mismo vidrio.

@mariabourassa1220

4 жыл бұрын

Great idea 👍👌

சிறப்பான பதிவு.... மிக்க எளிமையாக செய்துவிட்டீர்கள் ...மிக்க நன்றி பெருமகிழ்ச்சி

Thanks for making such an informative video.

Is the inner tube to control where the temperature changes? So it acts as an insulator? Is there a technique I can use to break on desired places on a bong (a broken one)

Awesome job thank you

Thank you for this. Would be interested to know which method gives the best and cleanest edge.

Thanks for sharing. I liked the one with the inner tube on both sides where it was to be cut and hot water then cool water. Looked like it was a clean break

Thanks for all those great ideas...best vid . I'm glad you're not blah blah blah about your self

Are you using the bottle cutter before doing all these heating/cooling methods or are they different ways to cut a bottle?

Thank you Nice work

1:43 - this was the most innovative of the easily done methods. I must try it. I have cut a lot of glass bottles. mostly used wet tile saw.

@balsalmalberto8086

Күн бұрын

It does not work,.

nice work

You are a genius i love your videos. Keep up the food work

Muito bom!!! Amei

@emmanuelsouza1413

5 жыл бұрын

Voce falar Portuguese tudo?

Hey man I know it’s been a while since you did the vid. Just wondering if you have any tips for using the wet tile cutter?

i like ur hard work

Very good video

1:40 candle got propelled into the carpeted living room.

@alkestos

3 жыл бұрын

I laughed at that

Amazing trik bro 😅

Super video boss

The brick 🧱 one ☝️ was giving me straight homemade boom 💥 vibes at 1st 😂😂

Sos un genio Amigo

Good job...

You are the boss.

Спасибо огромное 👍

Sean Beardon Can you use a cutter to cut larger products?

thanks. I love yur hot wire idea. I saw it way back in grade school when the science teacher taught us how to cut a coke bottle. I wanna recreate this as all the other methods resulted in odd ends! I will also try the string! the video was too fast. I saw you had 3 coils of wire. One end goes to the plug and the other goes to the 2 terminal points. The red/brown live one goes to one terminal and the blue goes to the other terminal. Is this correct? cheeeers bro!

String friction : what kind of thread or rope you use? . ( que clase de hilo o soga usa para cortar la botella por friccion? ) thanks !!!

Amazing 👌

Amazing

Muito bom Parabéns nota 100000

Great share...

MICROWAVE TRANSFORMER ,,,, THE FASTEST AND THE BEST ,, THANK YOU[[[[[[[[[[[[[[[[[[[[[[[[[[[

Amazing..

சூப்பர் வாழ்த்துக்கள் 💐

Thank you!

What glowing wire is used in oven transformer video

so nice

perfect 2 thumbs up :)

Thank a lot!!!

Nice Vid.

Brilliant techniques. Would hv been better with brief clear subtitles or narration and safety tips. Greetings from Seychelles.❤😊 ❤😊

good ideas

Rings that cut out of the bottles may be suitably cut in to 2 or 3 pieces and be fixed with araldite.. to the cut mug's handle?

Wow....👍👍👍 & Back Music.......👍🌟🔆🔝

Buen trabajo

Well Done Thank you

👍👍👍 Very nice 👍👍👍

Sharp man

süper. Çok teşekkürler. Dünya sizin gibi insanlar la daha bir güzel.🌹🌹🌹

smart and beautiful

Fantastic ones. Curious if I can do a hole into a glass bottle by heating it with a nail(with burnt edge) and apply ice. Feel free to suggest. Thanks!

@themnat475

4 жыл бұрын

i wonder what you might be trying to make lol

Wow nice idol

Nice

Excelente vídeo para ver las distintas formas de cortar botellas cual consideras que es la más rápida y perfecta

@projectmayhemUK

5 жыл бұрын

scoring and then using boiling water

No one wonders how he got that many bottles of vodka? But you are impressive and ready to survive any world massive blackout of any sort. Do you organise camps soon?

Impressive..

...aaaaaand there goes the candle^^

Wow amaizing

What kind of string are you using?

Legal que fio é esse que você usa pra cortar.

Hi, may I ask about the glowing wire. On output, how many amperes/watts? And voltage of secondary? As well as, the type of wire used. Thank you. Hoping to get a feedback.

@darek4488

5 жыл бұрын

How do you expect some would do it if we don't know how many turns the primary circuit has? Go back to school.

@fergusdenoon1255

5 жыл бұрын

there's another video where a guy uses Nichrome wire 32 AWG, with a 12volt adapter 1.5 amps. kzread.info/dash/bejne/hmF5y9WlftHRqtI.html

@juliaowens770

Жыл бұрын

the glowing wire is a great trick, however you should know that a transformer out of a microwave can most certainly be deadly. please do some research before attempting this process.

@rogierkraan

Жыл бұрын

Dangerous. Alternatively you can rip open your bread toaster theres a bunch of glowing wires in there

what to use to give it the clean finish at the top of the glass do you have to sand it down with something?

@ThillaiSundaramurthy

5 жыл бұрын

kzread.info/dash/bejne/gJd4j9ejda-aobA.html Sanding as per.. video above.. Please...

I just came for the background music. And learned something new in the process.👍Good video.. but only cuz of the background music. JOKING OF COURSE.

nice

Question! I plan on doing this on a jack daniels bottle(750ml), but I only want to cut the bottom part of it (the part that is a lil wider). Does the place in the bottle matter at the time of cutting it? AND Do you suggest any method for what I'm about to do? (I've never done this before so I'm gonna try it on 2 bottles before trying it on the one I want to keep)

@projectmayhemUK

7 жыл бұрын

Cutting a jack daniels bottle is hardest the best method is to use the tile cutter and it should cut ok anywhere but it is still tricky