For goodness sake, clean the areas around the oil filter and the oil plug BEFORE removing them, not AFTER you have put them back. Removing the filter and oil plug with all the road crap still around them is a classic way of introducing harmful debris into the engine. Also, that plug should be cleaned off carefully using brake cleaner or similar aerosol spray, paying particular attention to the magnet and then dry it before putting it back and fitting it with a new washer. Oh, and please DON'T use the draining oil on the seal of the new filter either, use a small drop of clean new oil. The old oil contains micro metal debris which can create a seal leak. Sorry but this is a conscientious mechanic speaking here!

@THX5000

3 жыл бұрын

I would also recommend using a torque wrench when tightening the drain plug. It is a $16000 bike after all... you can afford a decent torque wrench if you can afford this bike!

@federicocao574

2 жыл бұрын

I thought the same and I'm not even a mechanic, that bike cost 20k USED! in my country (new 26k). :/

Getting ready for my first oil change on my XE. Really appreciate your advice and your video!

that’s a really convenient spot for the oil fill. 😊

Thanks so much! Mine is low on oil for whatever reason 800km after the 1000km change. I‘ll just top her off but the video was very helpful! Having the low slung exhaust from zard makes access to the fill way easier :P

Quick and simple. Keep them coming!

@BackDraftBikes

4 жыл бұрын

Thank you bro! One Wheel Up!

Thx for taking the time to make this.

Now THAT is usefull and efficient content. Thank you.

Great video! Thank you! Real nice looking bike. Going to change the oil on my Street Scrambler, so this video really helped!

@BackDraftBikes

3 жыл бұрын

Awesome! Do It!! Very similar in design for maintenance

Just a heads up to anybody that prefers using Oem filters, you can buy the Triumph Service tool that removes the OEM filter, if you plan on replacing it with a new Oem filter Here is the part number for the oil filter wrench T3880313

@BackDraftBikes

3 жыл бұрын

Thank you for that!

Great clip thanks for putting up

@BackDraftBikes

3 жыл бұрын

You Betcha!

Well done thank you.

Good One.Thanks!

Great video thanks

@BackDraftBikes

11 ай бұрын

Glad you enjoyed it

Oil fill cap can be easily removed with 10mm hex socket and 6 inch ratchet extension.

You should admonish your viewers that the nut welded on the end of the K&N filter should only be used in removing the filter, and never tightening the new one. Many reviews of the K&N point out that if you use the nut to tighten the filter, it may cause a leak at the spot welds where the nut is welded on. I also make a point of replacing the crush washer on the drain plug. It's cheap insurance to make sure you have no oil leaks.

@BackDraftBikes

3 жыл бұрын

Agreed sir

Thanks for the video very informative. Is there any additional reMAP for the software?

@BackDraftBikes

3 жыл бұрын

From what I have heard they pushed out a new version. I wish the bike connected to wifi like my Tesla...

Hey.. Where did you get the front pipe heat shield in black? I have never found one that was not silver.

@BackDraftBikes

4 ай бұрын

Sharp eye. I painted it.

Thanks for your sharing! I am considering to buy this XE model but It ridiculously costs a lot to do such simple maintenance in my country local dealer. But after completed changed filter and engine oil, how to disable the “Service Reminder” signal shown on the digital TFT panel? Does this Scrambler 1200 have this service reminder setting? Greetings from Malaysia

@2wheelAdv

4 жыл бұрын

It’s a great bike and easy maintenance. The TFT screen can reset the service reminder.

@BackDraftBikes

4 жыл бұрын

The reset reminder was available after the first production run. If your bike is one of those, you have to get an update from the dealer. Once that is done, press the home button, and you will find it in one of the menus. Thank you for the comment!

@martincarre5301

3 жыл бұрын

I bought a tool for that. It's an OBDII called dealertool and worked perfectly with my scrambler: dealertoolcouk.ipage.com. It's a bit expensive but worth the while if you're gonna work on your bike by yourself.

Hi great video my friend where can you get those filters they look really good.. And how do you get the old one off do you need a special tool for that... I notice that your heat shields are black did you spray them yourself and if yes what did you use or did you buy them and on the subject of the heat shields does your back one rattle ....cheers J

@BackDraftBikes

3 жыл бұрын

Filters right from Amazon. The factory one is super tight, you just have to talk mean to it. I use a large pair of channel lock pliers to take off the factory, the K/N one has a nut on it. I did paint the shiny objects, yes, used VHT. I have a vid on that posted. Ride Safe! Stay Safe!!

@bernarddermody4283

3 жыл бұрын

Hi thanks for the information I had a look on Amazon for that type of oil filter it seems it at a great price and there's alot of good reviews for this filter but there is one review on there saying that there a fault on these filters where they leak at the nut have you every come across that type on problem my friend...👍😎

Hey! Cool video man! Thanks a lot! Quick question: How much oil did you buy? I've heard that the Scrambler 1200 (I got the XC) is oil "hungry"... Thanks in advance!

@BackDraftBikes

3 жыл бұрын

I haven’t found that it uses any oil, I just fill it and check it every so often.

@martincarre5301

3 жыл бұрын

@@BackDraftBikes Hey! Thanks for your reply. Sorry, I wasn't clear. I meant, when changing the oil, how much new oil should I buy to fill my bike up again?

IS IT CRITICAL TO CHANGE THE OIL AT THE 500 MILE MARK?I'M AT 2400 MILES ON A NEW 2019 TRIUMPH SCRAMBLER 1200XE AND I HAVE'NT CHANGED THE OIL YETTHESE ARE LONG DISTANCE MILES,NO DIRT.I BOUGHT THE CASTROL RS RACING 4T 10W-50 FOR THE OIL CHANGE I INTEND ON DOING WHEN I TAKE THE BIKE OUT OF STORAGE.I'M GOING TO USE THE FILTER YOU RECOMMENDED.

@BackDraftBikes

3 жыл бұрын

Break in metal fines is what the initial service is for. Safe riding mate!

What oil do you use? You didn't show it.

@BackDraftBikes

Жыл бұрын

Castrol is my fav.

Thanks for the video, quite helpful. But Triumph has not made it easy to check and change oil on this particular motorcycle, which I also own. First of all, you cannot get a center stand for this motorcycle which makes checking the level of oil by yourself quite difficult; it's a balancing act with top-heavy bike and kneeling down on your knees, you can never quite be certain that the Scrambler is in a vertical position. Why not have the level marks in the glass conform to the bike in it's side-stand position? Secondly, the filler cap is very hard to access with a tool. I don't have a hex wrench that long, sorry, and Triumph doesn't provide one. At first I thought I would have to dismount the header to gain access. If you put it way back into the recess of the motor, than at least make filler cap easier to twist with your bare hands. And then you have the problem of getting the oil from your bottle to the engine. I have never seen funnel like the one you used and again Triumph doesn't offer one either. In summary, I think design won over functionality for this particular Scrambler. No center-stand (option available on the XC, BTW) and the usually mundane task checking your oil and just filling up your engine oil requires special work-arounds and contortions. The manual is a joke and fails to address any of the difficulties.

@BackDraftBikes

3 жыл бұрын

I couldn't agree more. I hate hate hate the oil fill. A few tips for you: The funnel is available at any auto parts store, it is a Transmission funnel. They are like $5. Secondly, a tip an old mechanic showed me...take a scrap piece of lumber and put it under the side stand to get the bike close to level. You have to be careful, but it does work. I just ask my wife to look when I am on the bike. I have also used my cell phone to snap a video and then I would look at it to see the oil level. ---CENTER STAND WOULD BE SO MUCH BETTER! Anyways, ride safe!

@d.Cog420

Жыл бұрын

Hepco and Becker make a centre stand but it's extra weight so I use bobbins and a bike lift. You need it for chain adjustment anyway. Buy an extension for your hex wrench, cheap and surprised you don't have one as you use them for everything. Long funnels you can get at a parts store or pop your present funnel into an appropriate length of clean garden hose. None of this is hard.