How to change front springs / front coil springs on NISSAN LEAF 1 (ZE0U) [TUTORIAL AUTODOC]

Автокөліктер мен көлік құралдары

How to change front springs / front coil springs / front suspension springs on NISSAN LEAF 1 (ZE0U) Hatchback 11.2010-present [TUTORIAL AUTODOC]
Springs on NISSAN Juke (F15) (06.2010 - 2019) / NISSAN Pulsar Hatchback (C13) (10.2014 - 2019) / NISSAN Leaf I (ZE0) (11.2010 - 2019) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce springs: KYB, LESJÖFORS, STARK, MONROE, RIDEX.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Springs: www.autodoc.co.uk/car-parts/c...
Springs for NISSAN LEAF 1: www.autodoc.co.uk/car-parts/c...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ kzread.info?s...
🛠️ The tools you need to replace front springs:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner No.15
- drive socket No.13
- drive socket No.18
- drive socket No.21
- HEX bit No.H6
- wheel impact socket №21
- ratchet wrench
- torque wrench
- tap wrench
- crow bar
- rubber mallet
- hydraulic strut spring compressor
- hydraulic transmission jack
- fender cover
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► NISSAN car repair tutorial - • NISSAN car repair tuto...
► NISSAN LEAF 1 (ZE0U) car repair tutorial - • NISSAN LEAF (ZE0U) car...
► How to replace a front shock strut on NISSAN LEAF 1 (ZE0U) - • How to change a front ...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZread: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Пікірлер: 6

  • @nicholasstobart1046
    @nicholasstobart10462 жыл бұрын

    Just had a front coil spring break and had it replaced at the garage. Have neither the tools nor the lift to perform such work but able now to understand the complexity of the process. The garage replaced both at same time not just the broken one. They also performed an alignment afterwards to ensure all was in order. Loved the video.

  • @Tomazack
    @Tomazack4 жыл бұрын

    Might be the best tutorial I have ever seen. Even with torque specs! Thanks a lot. Might be worth mentioning that the damper bearing could be the reason why the spring breaks, which is most likely the reason for failure in my car, so worth checking.

  • @alexey9900
    @alexey99005 жыл бұрын

    Good 👍👍👍

  • @tarassu
    @tarassu4 жыл бұрын

    DO NOT APPLY COPPER EASE on brake disc mating surface.

  • @groudontv226
    @groudontv2262 жыл бұрын

    Such a great instruction video. No need to align afterwards, I suppose?

  • @autodocuk

    @autodocuk

    2 жыл бұрын

    Thank you for your feedback. We are glad that you liked our video review. After work, it needs to be aligned. AUTODOC

Келесі