00:12 - Raise the front of the car and secure on supports 00:14 - Loosen the wheel mounting bolts 00:24 - Remove the front wheels 00:30 - Use a drive socket No.13. Use a combination spanner No.15. Unscrew the brake caliper fastening 01:01 - Remove the brake caliper. Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system 01:10 - Remove the brake pads 01:20 - Use a drive socket No.17. Unscrew the caliper bracket fastening 01:44 - Remove the caliper bracket 01:59 - Use a Torx bit T30. Unscrew the brake disc mounting bolts and remove it. 02:23 - Clean the hub and apply high temperature grease to the seating surface of the disc 02:40 - Install the new brake disc on the hub and tighten the screws. Use a Torx bit T30 03:03 - Clean the brake caliper bracket from dirt and dust 04:22 - Install the brake caliper bracket 04:41 - Tighten the brake caliper bracket. Use a drive socket No.17 05:02 - Install new brake pads 05:27 - With the help of a special tool push in the brake caliper piston to a stop 05:43 - Install the brake caliper and fix it. Use a drive socket No.13. Use a combination spanner No.15

Just wanted to say thanks for the video. I used it to remove the caliper and check the pad thickness for the first time on my 2010 AZG Swift which has 100,000 km on it. I have added new pads to my shopping list. Best wishes.

@autodocuk

4 жыл бұрын

Thank you for your comment! We are glad to know that you liked our videos. Please feel free to contact our Customer Support team and we will be able to help you to choose the correct part for your car and answer all your questions. Best Regards, Autodoc team

thank you Sir for sharing the brake pad /disk replacement process

@autodocuk

3 жыл бұрын

We are glad that you enjoy our work!

Perfect thank you.

It's really helpful for learner coz i am learning it nowadays pls make new lots of videos

@autodocuk

5 жыл бұрын

Thank you for your feedback! We are happy that you like our work. Watch out for our updates. However, our videos are just informative and in no way tutorial. Best regards, Autodoc.

Great tutorial. Would this be a similar process for the zc31s ?

Very useful video thanks for producers

@autodocuk

2 жыл бұрын

Thanks for your positive comment! Stay with us! We wish you a Merry Christmas and a Happy New Year!

Thanks a lot!

@autodocuk

2 жыл бұрын

We are glad that you enjoy our work!

Only took you 6:37 seconds- now I know my mechanic is ripping me off!

@autodocuk

3 жыл бұрын

Thank you for your comment! Unfortunately, the complexity of replacement on each machine is individual, it all depends on the technical condition of the parts. Our videos are for informational purposes only in the sequence of replacement and we do not show some difficulties during replacement due to time savings. Best Regards, Autodoc team

Could someone give me the specs for does Disc retaining bolts please???...

You should remove the cover for the brake fluid revisiver before pushing in the brake piston

@autodocuk

4 жыл бұрын

Thank you for your feedback! You are absolutely right, we have already added this information in new videos. Best Regards, Autodoc team!

@unnainconnu9098

Жыл бұрын

Remove the cover and check that it doesn't overflow or otherwise remove some

The safe and correct way to service brakes too many dont follow safe processes when working on a safety critical item as the brakes.

@autodocuk

2 жыл бұрын

Thanks for your feedback! We are glad that you like our work. Stay tuned for updates.

I have a 2014 swift is the job the same for the later models? Many thanks.

@autodocuk

2 жыл бұрын

In general, the replacement will be the same, the only thing that may differ slightly is the design features of your car. More accurate information can be obtained in the technical documentation for the car or by contacting the service. AUTODOC

I have a 2007 1200 CC model swift vehicle, K12 b engine. zc71s chassis number. Disc dimensions of this vehicle 252 mm or 276 mm?which disk should i buy?

@autodocuk

3 жыл бұрын

Thank you for your comment! We highly recommend that you contact our Customer Support agents and you will get advice on which car parts you need to obtain. We look forward to hearing from you! Best regards, Autodoc team!

Which grease to apply on caliper bolt? Caliper to wheel hub bolts?

@autodocuk

2 жыл бұрын

To lubricate the guides, grease 5 000 000 150 Bosch is used

Could you specify the grease for caliper pins please ?

@autodocuk

5 жыл бұрын

Thank you for your feedback! Thank you for watching the video. According to the Regulations, one should replace the tension bolt. Best regards, Autodoc.

@dejo095

5 жыл бұрын

According to Suzuki Swift workshop manual you should change those rubber boots, slide pins go inside with each pads change, but if they're ok not letting grease out and dirt in, I dont see point in changing those. Also Grease used is Rubber grease, I think its silicon grease.

@STG44VOLVO

4 жыл бұрын

Ate plastilube, but this is the same fron Bosch.

@droge192

3 жыл бұрын

It is a silicone-based grease (never use copper grease for any work on brakes). A brand called "Ceratec" make the correct grease for brake applications, but there are other brands too.

Would love you to show the viewers how to check the discs for run out ,using a dial indicator. then it really would be perfect !!

@autodocuk

5 жыл бұрын

Thank you for your feedback! Our new videos will surely contain this information for our viewers. Best wishes, Autodoc.

I have a Suzuki swift 2015 I’m in the United States and so far I have called 10 different auto stores and they can’t anything on this car 🤧 What part number do they need for the front brake pads

@autodocuk

Жыл бұрын

We recommend that you contact our support team, where we will definitely try to answer your question.

Do you have to buy the special tool to wind the piston back in or can you use something else?

@autodocuk

Жыл бұрын

We cannot recommend another tool with which this replacement can be made, otherwise, we recommend contacting the service of your car.

@Bradal4ck

3 ай бұрын

Just use the old brake pad and a c clamp.

Break pad chang ke bad Bo disk me lag rha hain or average km hoe hain koe sulution

@autodocuk

9 ай бұрын

We do not have this information, so we recommend that you consult your mechanic.

Good evening, no backsies on this work and a simple request from you, please I wish you could clarify when any piece in the car shows signs of damage, no backsies again.

@autodocuk

5 жыл бұрын

Thank you for your feedback ! Our new videos will surely contain this information for our viewers. Best regards, AUtodoc.

@droge192

3 жыл бұрын

What does "no backsies" mean?

torque value for those caliper bracket bolts ?

@autodocuk

4 жыл бұрын

Thank you for your comment! Unfortunately, it is not possible to clarify the tightening torque. You can find out this information in the technical documentation for the repair of your car. Best Regards, Autodoc team