00:13 - Raise the rear of the car and secure on supports. 00:24 - Remove the hub bearing protection cap. Use a hammer. Use a flat chisel. 00:42 - Use a drive socket No.30. Loosen and remove the hub nut. 01:00 - Remove the retaining ring. Use a circlip remover 01:13 - Press out the wheel hub bearing. 02:17 - Clear the components and apply a thin layer of grease on the bearing seat. Use a wire brush 02:32 - Press a new bearing into the wheel hub. 03:05 - Install the retaining ring. Use a circlip remover 03:18 - Install a brake drum. 03:28 - Screw the hub nut. Use a drive socket No.30. 03:33 - Install the hub bearing protection cap. The tools you need to replace wheel bearing: - drive socket No. 30 - flat chisel - hammer - circlip remover - wire brush

thank you so much, I just did both rear wheel bearing in my backyard in about an hours work, saved me close to 300 Euro's of garage costs. Excellent video and great way to save some money

@autodocuk

Жыл бұрын

Thanks for your positive comment! Stay with us!

Thanks its great having a video like this. Very useful.

Never press a bearing by the inner race if its fitted by the outer shell. You will blow the guts out of the bearing or massively shorten its life span. Press the outer shell only. I use a recessed drift 0.5mm smaller in diameter than the outer race diameter to press in my bearings - recessed so it puts no pressure on the inner race.

@autodocuk

3 жыл бұрын

Thank you for your comment and for the valuable clarification, this will be very useful information for our viewers. Best Regards, Autodoc team

Thanks so much. This video is very useful.

@autodocuk

2 жыл бұрын

Thanks for your positive comment! Stay with us!

Nice video sir and thank you

@autodocuk

5 жыл бұрын

Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.

Nice video sir i like

@autodocuk

5 жыл бұрын

Thank you for your feedback! We are happy that you like our work! Best regards, AUtodoc.

very very good

@autodocuk

5 жыл бұрын

Thank you for the feedback! We are grateful that you appreciate our media! To see more interesting content stay tuned. Best Regards, Autodoc.

pourquoi vous ne montrez pas le changement du roulement avant ? merci

i need to change rear bearings on a igns is it just same way or different?

@autodocuk

3 жыл бұрын

Thank you for your request. If your SUZUKI IGNIS also has a rear drum brake, then everything is the same. AUTODOC

Is it the same thing for front wheel? I’m asking because there is disc brakes in the front so just to know how big of a difference there is

@autodocuk

Жыл бұрын

You can get acquainted with the replacement on the front axle on the video at the link kzread.info/dash/bejne/k4h6sayck5SXp9Y.html&ab_channel=autodoc.co.uk

The rear hub nut is only used once then replaced if its removed.A nut is only 10euro.

@autodocuk

2 жыл бұрын

You are absolutely right. The nut is disposable it is recommended to replace it with a new one during dismantling. Happy New Year! AUTODOC

,Врх !☺

@autodocuk

5 жыл бұрын

@Sasa Djokic Thank you for your feedback! We are grateful that you watch and comment on our videos. You are our devoted follower. Please, send us an e-mail and we will forward you our gift certificate for 50 EUR for purchases through our website. Best regards, AUtodoc.