Never use an impact gun to loosen or tighten the locking wheel nut. They are so easy to strip.

@gbwildlifeuk8269

9 ай бұрын

Have you told every tyre house and manufacturer in the country?

Fab vid as usual

Love your Video's

Great info thanks

Great. Thanks.

Nice video. Thanks for the details...

@themarvelousvlog

11 ай бұрын

Glad it was helpful!

My arm has a torque wrench built-in except for Head Bolts and Flywheel bolts and some wheel bearing hubs. As this vid maybe for beginners then aleast they cant snap nothing by torquing everything. Great vids by the way

Clear and to the point, great tutorial👌🏽 Only thing I would've added is sometimes it's a good idea to wrap a rag around the neck of the brake fluid reservoir, in case any fluid spills out the top as you push the caliper back in - obviously only valid when the fluid level is already high prior to pushing the piston back in.

@themarvelousvlog

11 ай бұрын

Always mate. This one was low anyway so I didn't bother. I actually had to top it up after I was done with the job

I have found it a lot easier to the brake pads in the calliper bracket first then put the calliper bracket on the hub as make it less fiddly

Depending which side I just take the bottom or top calliper carrier bolt out and push the carrier bracket up out the way. Also using power tools could snap the bolts and if you are a DIYer there is nothing worst than snapping a bolt! Also you forgot to say use the break pedal first to clear the air then put the CAP back on before you drive please!!

9:18 galvanised and counter sunk.

I notice yoy always do more than one click when using torque wrench. Torque wrench manufacturer norbar, only recommends one click, as additional torque is being applied with each click. Love your videos and wish I was young wnough to be doing this again. Much more complicated now. Particularly impressed withyour diagnostic skills 👏

Great video pal but should use brake cleaner just to clean away any contaminants especially on the new discs as they are treated to stop them rusting over time in storage 😁

@themarvelousvlog

6 ай бұрын

Not with the ones with GEOMET coatings, you don’t have to. Even says on the manual not to as it can affect the coating that they have applied to it. Edit: GEOMET coating is what prevents them from rusting over time in storage. It also helps the pads and discs to break in to each other much quicker

What is your background in the trade? You have a good all round knowledge of different makes…top man for being mobile, I can’t bear working outside on cars!

@themarvelousvlog

11 ай бұрын

BMW and Mini, lots of training including hybrid and electric, lots of AllData, lots of Haynes and also some KZread 😂. To be honest with you, all cars work the same; just different layout. Once you know how one works, it pretty much applies on all… so I say 💀😂

@sbmorris2k6

5 ай бұрын

How long have you been doing it for mate you look young but knowledgeable 👌

@themarvelousvlog

5 ай бұрын

If you count since I was back in Philippines, be around 12-13

I hope you remembered to re-tighten the brake fluid reservoir cap

@themarvelousvlog

11 ай бұрын

Haha! Definitely did ^_^

Eric O South Main Auto says grease on the pad ears actually atracts grime and dust , thus not having the desired effect, he just puts grease under the hardware, what are your thought on this theory? Enjoy your videos 👍👍

@themarvelousvlog

11 ай бұрын

Well to be honest with you, different mechanics have different takes on this. People apply them, some don’t. Just your preference really. OEM companies (not mentioning their names as I’m not allowed 😅) develop this type of grease specifically to be applied on the lobes of the brake pads; so it must be because it’s meant to be applied… right? Who knows, there’s a massive debate in our community about it 😂

I find it easier to use an old brake pad and c clamp on the piston

9:20 lots of people bin it thoughts?

Come to Stockholm bruv......you would make a killing. Everything is a rip off here...worst service ever here

@themarvelousvlog

11 ай бұрын

Marvelous Cars Worldwide. That sounds crazy 😂

@brettrickards

11 ай бұрын

@themarvelousvlog do u get cheap parts from that giant ebay wrecker yard....? I forgot the name of it. Is it easy to get a hold of cat converters for vw golf 7 and also used dsg gearboxes ?......what sort of prices u paying for em?