OH MY F'ing G!!!!!!! Short and straight to the point with a little dash of extremely helpful!!!! I must've watched 7 videos on this exact thing and all of them either had extra steps that confused me, took 15+ minutes to actually start the process, OR WASN'T IN ENGLISH! (i blame youtube for that one. 🤣) THANK YOU!!!!!

@RCMadnessHobby

2 жыл бұрын

Glad I could help

Cheers Buddy ... Just purchased a used Tekno buggy with xr8 ESC left in ,it would not stop blinking red after binding... Used your vlog for info and now she's running sweet thank you heaps..... 💯😊😊😊😊

Awesome great video right to the point and worked perfectly. Thanks

Gracias a tu video pude conseguir configurar bien mi esc ya que me estaba dando problemas al presionar el gatillo este demoraba en funcionar y me di cuenta que tenia una zona muerta y eso era por no haberlo configurado. Gracias.

shiiii,every other vid takes ages to getto the point but this was perfect!

Thanks for posting this as it really helped me calibrate a used RC car that was already pre-built that I had to add my own RX/TX to and did not know how to set the throttle for it.

thanks heaps, simple stuff but as a bit of a newbie i appreciate it. subscribed

Tyler you're the man

Thanks mate 👍 Worked a treat.

Short, precise and useuful! No bullshit, thanks!

Very helpful video. Wish I had this a couple years ago. I wouldn’t have had to bother you to do it for me. 😂

Very helpful vid! Step by step, worked perfectly for my 16BL30. I can never figure out these instruction manuals :(

This is very helpful. Thank you

thanks bro for the video cant wait to go tommorow test this whit 4s lipo 7800mah

Perfect video. Thank you very much. I subscribed.

Good info. Thanks for sharing

If you could clarify how you can do all this with the stock RTF transmitter. That would be the 761-1 RTF 750mm Volantex Mustang I can't get more than 1 or 2 beeps in any position. I was able to I get the motor to run but 1. Feels like it's catching when it first starts,2 and full speed doesn't seem like it's turning fast enough. Haven't got the motor mounted yet so, can't really mount the prop. I'll have to look at adapting the motor mount. Thank you. There's no set button for the hobbywing skywalker 30ampesc.

This video is great, am using a Team corally CT2R controller should all the dials be at 0 prior to calibration (or perhaps all at 100%) ? I also have a weird thing, the steering wheel is not recognised, but the steering trim knob when turned willmove the wheel direction. Perhaps my ESC needs resetting or mt rx/tx need rebinding?

Life saver I bought a 100$ esc and I thought it was broken

I got it I got it I got it I freaking got it now I have reverse lol you’re directions are short sweet into the point it’s not three hours of bullshit talking five hours talking about all your rigs and two minutes of a tutorial it’s literally under two minutes for the entire video I can’t thank you enough. Subscribed

hello, I always have hobbywing but another model, the LEDs as in the video go, it just does not make sound. thank you

Amazing!!! Thanks

Are the 1100 kv motor a with a b with b and with c to the max 5 esc? I tried this with my spectrum remote and I can’t get it to work. Any tips?

Hey bud I have a question so I have the same esc it was working fine then now it won’t go in reverse so I have tried the calibration as you showed but when you get to the point that you have to set the throttle to brake the esc doesn’t beep now if I throttle forward it will beep do you have any idea how do I program it and let it set the reverse normally while calibrating ?

Fantastic thank you

Hi. After I went through the calibration procedure, I have power to the servos but not on throttle. What am I doing wrong? Thanks

Thank you!!!!!🙌🏽

i am getting a constant x3 blinking green light after calibration , also my esc doesnt make a sound its a wb 10bl50 rtr esc , it worked before but i then plugged in my battry wrong and shorted it , is this 3x green light the fact that its shorted out and damaged ?

I have a hobbywing max 5 I just bought it and got it in today and it’s just flashing red light I plugged in two 3s lipo inside I’m not sure what to do help

Can you use the original dx3 controller with ezrun max5 on the Kraton?

Do you know why max6is cutting out running 4s and not 6s? Like it’s going in to thermal cutoff.. if you do please let me know what to do

Thanks a ton! 😀

Friend! please help me I bought the esc it came without the cable, which connects to the motor, what is the gauge, (section) awg that I bought for the motor? What would be the cable? Do I buy it with a silicone cover? I'm going to use a 540v 8.5T motor in this 10bl120 g2 esc

How do you reduce the drag brake with this routine? Would you throttle the controller to a percentage in the reverse direction to approximate different percentages of drag brake? While doing the exact sequence in the video, my drag brake is now set too high.

@FARC723

Жыл бұрын

You would probably need one of their programmers.

How to program hobbywing x6 motor using multifunctional lcd program box

My throttle trim is zeroed out but can not get the 3rd set of beeps for reverse what could this be, tried two receivers too!

Damn! for some reason on the ezrun max 10 it won’t beep when I go through the throttle positions.

My car wont revers. Its a hobbywing Xerun xr8 sct and I cant make it revers. The red light is blinking when I try to revers. Is there eny one ther have a clute? Peace from Danmark.

Thank you

OMG man you saved me. I got a brand new HW Max10 that wouldn't really go backwards and when it would it would continue by itself. This fixed the issue

Thankyou!

my esc doesnt have set button.. what can i do?

What if I have no reverse!?

I almost threw this f'er out...lol. Thanks

What if it keeps blinking green?

Wish this worked. My 10bl120 does the red flashing but as soon as I hit the set button it stops flashing and beeping never get a green light.

@derickhood5142

2 ай бұрын

Me as well can’t find anything about it on the internet

Thanks 🙏🏻 👌🏻👍🏻🏁

Thx so much i thought i had broken a 230 euro combo (motor and esc) i nearly had a heart attack

Hello so I just bought a max 8 combo and even when I try to do what you did it won’t stop flashing red idk what is going on please help, the esc keeps flashing red and when I go to calibrate it no green blink flashes

@RCMadnessHobby

2 жыл бұрын

That usually means it has no throttle signal from the receiver. Make sure it’s plugged in the right direction.

Good day RC friends, does anyone know why I use 3s with this hobbywing 2200kv combo and an XR8PRO ESC Are the batteries lasting 3 minutes? My batteries are 8000mah 80c 3s but they last 3 minutes or less. Is the ESC being protected from something? The motor says in the manual that it is 2 to 6s. and the ESC from 2 to 4s But with 3s batteries I have not been able to make the batteries last more than 3 minutes. if someone could help me

Question: when you say full brake, is that reverse?

@austincurtis9907

Жыл бұрын

yes u push and hold forward the trigger

Can you do something for power I'm new to the game I bought an used xmaxx s8 and it has no too much power like it doesn't even wheelie and reverse is very slow too it came is factory besides the hw esc and it came with 3s batteries so I'm guessing getting s4 batteries might help ??? Or do I have to do more gears and stuff ?

@RCMadnessHobby

2 жыл бұрын

There is quite a difference from 6s to 8s power. Also the power can be turned down in the esc. If you are local swing by the shop and we can help.

@ramonortiz3095

2 жыл бұрын

@@RCMadnessHobby where you located?

@ramonortiz3095

2 жыл бұрын

@@RCMadnessHobby also I noticed that tge esc might be giving up or over heating or Idk what could be. But if I'm running comes out hard then slows down then stops by it self and doesn't do nothing till a couple seconds later idk if I should buy a new one?

@RCMadnessHobby

2 жыл бұрын

@@ramonortiz3095 I would check the batteries or try a new set. Also when it cuts off what are the led liights blinking. Different number of blinks equals a different trouble code.

@RCMadnessHobby

2 жыл бұрын

@@ramonortiz3095 enfield ct

what could be the reason why I can't calibrate? the light on esc never turns green.

@clownpuncher29

6 ай бұрын

Same problem here

Hola llevo Max 6 G2 y 4990 , lo he programado sin protección, y 180 km h se me corta y se cae voltaje. Sabes por qué puede pasar??? Llevo 2 baterías de 4s zeee 120c y la app marca mínimo voltaje 23v . No sé por qué corta si lo he programado sin protección. Ayúdame por favor

But if ESC doesnt have any set button, so what? how to calibrate thet? its so annoying that everyone show with ESC where is the button, but if doesnt have?

Nice1👍🏻

Is brake same as reverse?

@RCMadnessHobby

2 жыл бұрын

Yes sir

Mine won't even beep for reverse it does neutral it does forward and then that's it what could be wrong turn a million of these things this is the first one giving me a problem

I can't get mine to calibrate.. dosnt work

Mine doesn’t beep and my motor is plugged in

My reverse won’t calibrate

i like ur right to the point but it doesnt help because u only gave half the info . what about the steering?

@Unite_Studios124

3 ай бұрын

The esc has nothing to do with steering only the reciver controls steering calibration

I hate these hobbywing systems. They are slow unless you use boost and turbo, then they will melt your battery terminals. Hobbywing sucks, I feel sorry for anybody who buys this crap.

@Everything-ness

5 ай бұрын

I'm convinced that this is Copy Pasta Now😂😂😂... Kinda odd that the World's best use Hobbywing . 😅

@avalanche95

Ай бұрын

Castle burns more