Great video bud I just watched it and just programmed my ESC with no problem Thankyou

@TJsRC

3 жыл бұрын

Glad it was helpful my friend. 👍

Brilliant video just what I was looking for thank you.

@TJsRC

4 жыл бұрын

I'm glad it was helpful. 👍

Not only is this the most concise and easy to follow video that I’ve found on this subject, but you sound almost exactly like Ron Howard .What an amazing added bonus. Liked and subscribed.

@TJsRC

3 жыл бұрын

Thank you for the nice compliment. I don't think I've ever been accused of sounding like someone famous before. I'll take it though😁

Excellent video and very helpful thank you 🙏

@TJsRC

4 жыл бұрын

Neil Fastfreddie Anderson I'm glad it was useful. 👍

Very good description. Im doing this with a arrma typhon!!

@TJsRC

5 жыл бұрын

Thanks! Sounds like you're going to be having some fun. 👍👍

Very informative,thank you👍👍

@TJsRC

5 жыл бұрын

Glad you enjoyed it👍

Great Video! I just purchased the Multifunction program box. Good basic , straight forward steps to set it up.Will use it to setup my vintage B4 and T4. Thanks.

@TJsRC

4 жыл бұрын

Greg Van Buskirk Awesome bro. Glad found it useful. Good luck setting up your rigs. 👍

Right on man good video.

@TJsRC

3 жыл бұрын

Thanks my friend👍

Great info. Thanks 😁

@TJsRC

Жыл бұрын

Glad it was helpful!👍

@IowaBudgetRCBashers

Жыл бұрын

@@TJsRC I knew I could turn down the throttle punch just wasn’t sure how. Now I know.. 😎

Thank You!

On my hobbywing quicrun fusion, It only lit up on the 6v direct from esc, not the manual instructed PRG port with the button. That tested at 7.4v, So I ran 6v power, but used the signal port on the PRG port and there you go it works. Great manual..

@TJsRC

8 ай бұрын

Glad you got it figured out 👍🏻

Good to learn informatio, Thak you!

@TJsRC

5 жыл бұрын

Thanks, I appreciate that😁

Just stuck a Max 8 in my Summit and this video was exactly what I needed to dial it in...Thanks 😊

@TJsRC

3 жыл бұрын

oldnotwise71 Awesome 👍

Enjoy your videos! I only have NiMH batteries can I program my 880 esc even though it is factory set-up for lipo's, or do I need a lipo to program my esc Thanks!

@TJsRC

2 жыл бұрын

You don’t need a lipo for programming the ESC. NiHm have the necessary voltage to power the program card. Once you have the program card connected just scroll through the settings until you get to “Battery Type” then change it to NiMh.

Thank you!

Still running the stock esc in my trx4, 2020 crawler. Why upgrade? Will this eliminate the need for a bec? What would be the number one biggest advantage? Better motor control? I'm building a new crawler and haven't got the esc yet, got a recommendation ?

@TJsRC

2 жыл бұрын

The stock esc has very little adjustability and not a very strong internal bec. I've had great success with the castle sidewinder 4 with both sensor less brushless and brushed motors. I plan to get one of the new castle copperhead ESC's next as they are a better version of the SW4 with the ability to run sensored brushless. If you want to stay with the cheaper brushed motors then the hobbywing 1080 is a great choice with a good amount of settings to customize to your liking and setup. All of these ESC's I've mentioned can be found in most big name rc parts online stores and local hobby shops. As for a BEC you will have to determine if one is necessary based on the servo and accessories you are using. All the ESC I mentioned will power a stock servo easily but if you upgrade to a high power one they may not be adequate. Many high power servos now come with direct power connectors so you don't need a bec at all. They simply run straight off the main battery power.

good video!!

@TJsRC

5 жыл бұрын

Awesome, thanks😁

Question.. built a mini crawler. In reverse it crawls nice and slow, but in foreword it goes from nothing to medium speed. How do I reverse that so it crawls foreword? I have this same program card on an ezrun 18a brushless esc.

@TJsRC

2 жыл бұрын

It looks like the HW 18a is Sensorless so just switch any two of the three motor leads and that should reverse the motor direction.

hello there did u have a great day? cus i am your 1000th subscriber!!!!!!! yay

@TJsRC

3 жыл бұрын

Awesome👍 Thank you friend 😁

@sheb5799

3 жыл бұрын

@@TJsRC your welcome :)

@paulclancy2404

2 жыл бұрын

@@TJsRC hey do you know if the card not the box will work with the XeRun SCT , its sencered says not supported l.e.d . Sucks because I bought it being impaitaint using hobby shop instead on line , I still spent 300 bucks , I swear cheaper to buy RTRS than parts wheels electronics alone than all small repairs you think only few bucks more each part or upgrade but adds up buying 20 items or so , I paid 129.99 you can get on line 115 to 129 thsts not too bad than the small parts for repairs by you know it spent a extra 100 bucks . I gave you a sub

@TJsRC

2 жыл бұрын

@@paulclancy2404 I don't think the LCD program Card will work on that one.

Do the xr10s escs require the card? I only get "connecting to the esc" when I use the box

@TJsRC

3 жыл бұрын

The Hobby wing website specifically lists the program box as a way to program the XR10. Did you get a program card in the package with the esc? I know you probably already did this, but If you are having connection issues, start back at square one and verify you have the order of connecting each piece down then start over slowly. Also double check each connection as some of the three wire RC communication cables can be inserted reversed. Once you've connected everything then power on the ESC. if that still doesn't help, something else you could try is connecting the program box to your PC to see if it needs a firmware update itself, if it communicates fine with your PC it's a reasonable assumption that the box is working ok and something else is at fault. You will need this software from Hobbywing in order for your PC to talk to the box. www.hobbywingdirect.com/pages/download

Great video bro subbed you 👍

@TJsRC

4 жыл бұрын

BigPoppaPaul's Radio Controlled Adventures Thanks friend. 👊

@bigpoppapaulsradiocontroll2724

4 жыл бұрын

@@TJsRC no probs keep up the good work bro 👍

thank you!!

@TJsRC

3 жыл бұрын

derka5581 Glad it was helpful. 👍👍

Nice 👍

@TJsRC

4 жыл бұрын

Ronnie Creason Thanks.

Thank you

@TJsRC

Жыл бұрын

👍

Hey TJ, is the PC Software still available and working with my Xerun 150A ESC ? Cheers (from freezing cold Germany) Nik

@TJsRC

7 ай бұрын

That I do not know. The only Hobbywing product I still have is the AXE system and that uses the Bluetooth Hobbywing App on my phone. You could go to the Hobbywing website and look for Downloads on their support page.

great vid btw

@TJsRC

4 жыл бұрын

Vic C Thanks😁

@vicc6744

4 жыл бұрын

@@TJsRC I just subscribed thanks for the info

Hello..can I use this card on my Reely Deathwatcher Mustang?? Thanks

@TJsRC

11 ай бұрын

That I’m not sure. If Hobbywing manufactured the esc for Reedy then maybe. I’m not familiar with Team Associated products Is “Deathwatcher Mustang” the model name of the Esc or the RC car?

I was wondering if you could help me with some issues. I habe a Hobbywing Fusion quickrun SE 1800kv running for now a 2s lipo 7.4v. My transmitter is RadioLink RC6GS v3. The transmitter has connected to the motor and it does work but there is some settings in the transmitter that i need to tweak to work out the bugs. Do you know anything about the RC6GS v3?

@TJsRC

5 ай бұрын

I'm sorry I'm not familiar with that radio. You should try searching KZread for videos about that specific model radio. There should be more knowledgeable video creators from those results.

@Webb4RC

5 ай бұрын

@@TJsRC I joined a forum online. Thanks

does it come with the cable to connect to the esc?

@TJsRC

3 жыл бұрын

I believe both the card and program box should come with the cable when purchased new. If you don't get one they are easy enough to find and fairly inexpensive.

I have the same esc as you straight out the box I've tried using Exact same hobbywing program card lights come on but dash lines across screen doesn't seem to be working for me Any ideas why ?

@TJsRC

3 жыл бұрын

Do you have any other Hobbywing ESC's to test it on to see if it acts the same? Otherwise the only thing I can think of is something not connected correctly. If that isn't the case then perhaps you have a bad program card.

@cammons8624

Жыл бұрын

Same

I'm a bit late. But you have any idea why my max 5 is binding throttle to the steering? I can't seem to get the throttle to even register when in programming mode on the esc.

@TJsRC

3 жыл бұрын

First make sure that the servo and ESC are plugged into the correct slots on the receiver. You can test this by unplugging both leads from the receiver. Then plug just one of them back in and see which channel is controlling it. If it's backwards move the lead to the other spot on the receiver and see if the correct channel is now in control. Be sure the wheels are up off the ground while doing this so it doesn't accidentally go shooting across the room and hurt something.

@TJsRC

3 жыл бұрын

Maybe I misunderstood your question, the throttle not responding while in programming mode is a safety precaution. When the programmer is plugged in I don't believe you will be able to get any response from the throttle. You have to wait until you finish making your changes and disconnect the program card. The ESC will reboot with the new settings when powered up next and should be good to go.

@mattgibbons4021

3 жыл бұрын

@@TJsRC its not quite that. I'm not using a programming card, just the power and set button. When setting up the throttle on the esc by pressing the set button, the throttle is binding to the left and right steering via the remote (not the trigger)

@TJsRC

3 жыл бұрын

It sounds very much like you might have the ESC and servo leads plugged into the wrong slots on the receiver. Typically channel 1 is steering and channel 2 is throttle. I like to use the phrase "1 to turn and 2 to burn" to help me remember where each one goes. If this is not the issue then something else is interfering because the ESC simply can't influence which channel it is being used on. Do you have any other accessories plugged into the receiver? if so unplug everything from the receiver except the ESC to channel 2 and try the throttle setup procedure again with only the ESC plugged into the receiver and nothing else.

so i just got a hobby wing quicrun esc and it is factor set to lipo battery but i need to run nimh what setting do i have to change to make it set for nimh

@TJsRC

3 жыл бұрын

The Quicrun is an entire line of ESC's by Hobbywing. Wich specific model is it?

@crazyburrito7971

3 жыл бұрын

@@TJsRC hey my local hobby shop helped me out thanks for helping though

@TJsRC

3 жыл бұрын

@@crazyburrito7971 Awesome. glad you got it solved. Have fun cruising with your RC my friend.

Just picked up the box used with no cable to connect what do i need ? Thanks

@TJsRC

4 жыл бұрын

AKA TIMMYT You will need a servo extension cable with male connector on both ends. Something like this www.amazon.com/dp/B01MQPCLPT/ref=cm_sw_r_cp_api_i_J2IOEbCFFT96V

@timmytfpv7316

4 жыл бұрын

TJsRC cool thanks for the quick reply ordered it 👍

I can’t get the program box to connect with the esc. The firmware is on 4.0.01. I hit ok and the connecting to esc never changes. I hit ok and nothing

@TJsRC

3 жыл бұрын

Do you have a battery connected to the esc and have it powered on? If so it could be that the jumper cable is connected backwards at one end or the other.

Hi I've got the hobbywing 880 for the clod how do I change the setting to NiMH on the program card?

@TJsRC

2 жыл бұрын

Here’s a link to the manual. It looks like setting number 2 is the one for selecting either Lipo or NiMh. cdn.shopify.com/s/files/1/0109/9702/files/User_Manual_WP880en.pdf?16270622557833167090

@GMAN19169

2 жыл бұрын

@@TJsRC on the program card it says 2. Lipo cells (1) auto calculation. (2) 2s (3) 3s etc etc Nothing about changing to NiMH

@TJsRC

2 жыл бұрын

Are you sure you have the correct LED program card? According to section 4 in the manual for the 880 there’s a specific program card needed for this model. Verify the Part number of the one you’re using matches the number in the manual.

@GMAN19169

2 жыл бұрын

@@TJsRC thanks managed to get it sorted. Thanks for the help.

Does any programming card work for any esc?

@TJsRC

4 жыл бұрын

Miguel Lopez No, each brand has their own. For instance the two shown in this video only work on Hobbywing branded ESC. These two won't work on Hobbywing's new AXE system ESC though. Castle brand for example requires castle devices. The have a Bluetooth adapter to use a smartphone app and a USB PC adapter for using a computer to make changes. I believe they also have programming cards for some of their ESCs. Most of the major ESC manufacturers have their own brand device for controlling their ESC settings. Hope that's helpful. 👍

hello...can the program box work on a quicrun esc? i can get mine to connect....

@TJsRC

4 жыл бұрын

terrywicked Start by verifying with your ESC user manual or look on the Hobbywing website for your model to make sure it is programmable. If it is then you just need to carefully go back through the "how to connect" procedure to make sure you haven't skipped a step. What model ESC do you have?

@MrAllancord

2 жыл бұрын

Same with me

@sjoerddejonge4080

Жыл бұрын

Same here it does not work on HBW seaking 130A or the HBW seaking 60A just keeps saying connecting esc

What if my fan port has only 2 sectors instead of 3?

@TJsRC

3 жыл бұрын

EveeKivi Blog Then you need to double-check to be sure the ESC you have will work with one of these programers. If it is a Hobbywing, you should be able to look it up on their website and read through all the descriptions and specs. If it is programmable it should say so. If it is supposed to be programmable but there is no third metal prong on the fan connector, 2 things are possible. 1 the unit doesn't use that port for the programming, you have to connect a different way. For example the Hobbywing AXE can only be connected wirelessly. The second option is that there's supposed to be a third prong but it's missing, either broken or faulty from the factory in which case you would need to contact Hobbywing customer service to see if they will replace it. Good luck my friend.

For some reason I don't have the motor reverse option when plugged into my XR10. Am I doing something wrong?

@TJsRC

2 жыл бұрын

what kind of motor are you using with it? Because if it is "Sensorless" you can just swap around any two of the motorleads and that should reverse it. DO NOT DO THAT if it is a "Sensored" motor though. I looked up the XR10 user manual and it doesn't appear that it has a setting for motor reverse.

@kyoz1984

2 жыл бұрын

@@TJsRC it's the hobbywing fixed timing justock 10.5T sensored version. So there's no option to reverse it?

@TJsRC

2 жыл бұрын

@@kyoz1984 Unfortunately yes. It seems that the XR10 series are race ESC's with limited settings so the playing field is level as far as electronics go.

will this card work for brushed AND brushless

@TJsRC

4 жыл бұрын

Vic C It works with a lot of Hobbywing brand ESC's brushed and brushless as long as the ESC has a data port on it. If you aren't sure go to the Hobbywing website and look up the model ESC you have to check and see if it is listed as programmable. The user manual if you have it should also tell you if it is or not. Does that help?

@vicc6744

4 жыл бұрын

@@TJsRC Thanks my manual says it will but my plug for the servo is the same as for the fan but I understand the fan port is also the data port-

Is there a way to default the 1060

@TJsRC

3 жыл бұрын

I don't think the 1060 is programmable. I believe the only adjustments are the to two physical jumpers on the ESC. You can look at the user manual here to see where the default jumper locations are. hobbywing.com/products/enpdf/QuicRunWP1625-WP860-WP1060.pdf

Hi dear.. I have this esc in my baja electric.. In items number 3 voltage cut of what dose mean by auto intermediate? Did esc cut the voltage in 3.4 or less then this.. My lipo got puffy. Wen i chk the volte its wat below 3.0v!! Its should cut it.. And what about auto higt? What dose mean? Any way i want to save my lipo battery

@TJsRC

4 жыл бұрын

The setting should have been fine most likely. What brand and model is your RC car? Also tell me about your battery. Is it a LiPo? Number of cells? C rating? For safety reasons don't try to do anything to the battery if it is puffed up a lot.

@sultan9041134

4 жыл бұрын

@@TJsRC my rc is baja 5b electric.. Battery lipo 6s with 45c

@TJsRC

4 жыл бұрын

Sultan Tel I think you should get in touch with Hobbywing support center. Explain what happened and see what they say. It's hard to say without being there to see what's going on but I don't think this should have happened. Hobbywing should have some idea or they might have you send the esc back for service. PLEASE be safe, if your Lipo puffed up find a local battery recycler who can help take care of it properly. If it's puffy DO NOT ATTEMPT TO RECHARGE IT. Make sure the battery is kept in a fireproof box or bag until you get it to the recycler. If Hobbywing finds that something was wrong with the ESC they may replace the battery for you. I have had good customer service from them in the past so I hope your experience with them is good as well. Be safe and good luck my friend. 👍

@sultan9041134

4 жыл бұрын

@@TJsRC thank alot brother.. One of my friend told me to set on (auto high) .. I will try then i will back to you 😊

@TJsRC

4 жыл бұрын

Sultan Tel I still would not advise using the ESC again until after talking with Hobbywing. Even if you had used the auto low setting I don't believe it should have allowed the voltage to go below 3.0 volts. Keep me posted if you figure out what happened. I hope you get it solved.

Will it work on other esc brands?

@TJsRC

4 жыл бұрын

RUST Unfortunately most "brands" have their own programming setups. These two programers shown in the video work for Hobbywing made ESC's. To change settings on a Castle Creations ESC you would need one of their own programmers.

@rust8663

4 жыл бұрын

@@TJsRC i see, thank you.

Does this work with Ni-MH?

@TJsRC

Жыл бұрын

Yes. Battery type shouldn’t affect the esc settings. Except for the setting for using either “lipo” or “NiMh” make sure it’s set to NiMh if you’re using that type.

@TheCleaner6969

Жыл бұрын

@@TJsRC Ok thanks for the info!

Can this Hobbywing LED Program Card Work with MST esc?

@TJsRC

2 ай бұрын

The hobbywing programers only work with Hobbywing products. Hobbywing does make escs for some rc truck manufacturers. If the ESC says Hobbywing on it then probably it would work. I don't have any experience with MST products so I am unfamiliar with their electronics.

@geryang450

2 ай бұрын

@@TJsRC thanks

@geryang450

2 ай бұрын

Can it work with all hobbywing esc?

@TJsRC

2 ай бұрын

@@geryang450 It will only work with ESC models that have settings that can be adjusted. Not every Hobbywing ESC has adjustable settings. A lot of them do but to be sure just look at the instructions sheet that came with the ESC or look the ESC up on their website.

Would does work for a Xerun stock v3

@TJsRC

3 жыл бұрын

Yes it should.

@papimew2672

3 жыл бұрын

@@TJsRC thank you for the reply! I ordered one online and I thought I messed up lol

@TJsRC

3 жыл бұрын

No problem. Glad to help. Good luck my friend. 👍

What is your esc plz

@TJsRC

4 жыл бұрын

The ESC in this video is the Hobbywing Max 8.

Can you program the Hobbywing QuicRun-10BL60-SENSORED esc

@TJsRC

2 жыл бұрын

According to the manual found here yes you can. hobbywing.com/products/enpdf/QuicRunWP10BL30-10BL60-8BL150.pdf

@dustinplee5067

2 жыл бұрын

@@TJsRC So is there nine punches on that esc and is the wires already come soldered on there

@TJsRC

2 жыл бұрын

@@dustinplee5067 if you are buying a brand new one all the wires should already be attached.

@dustinplee5067

Жыл бұрын

Is the fan port on the HOBBYWING Quicrun 10BL60 Sensored ESC same as the other hobby wing esc with the 2 pin

I’m trying to program a Max 5 esc with program card. All I’m getting is - - -- . I’m not getting options or numbers on screen, just hyphens

@TJsRC

4 жыл бұрын

Did you make sure the cable from the program card isn't plugged in backwards on either end? The ESC has power and is turned on?

@TJsRC

4 жыл бұрын

Jason Halloran Did you get it figured out yet?

@jrocrcpower5949

4 жыл бұрын

I never got it to work I tested on a Max 6 and I didn’t work either . Just 4 lines across the screen. I think it might be a bad unit .

@TJsRC

4 жыл бұрын

@@jrocrcpower5949 If you tried on a second esc and it still didn't work then I would agree. Is this the programmer that came with your esc when you purchased it? If so I would contact Hobbywing, they may replace it for you. I have had good success working with them to resolve issues before so that's what I would try. Good luck my friend.

@jrocrcpower5949

4 жыл бұрын

TJsRC I figured out how to program my ESC manually. A little trial and error. Thanks for checking in on me 👍🏻👍🏻

Need help my program box wont connect

@TJsRC

3 жыл бұрын

walllee814 start by verifying that you have followed every step of the connection process in the user manual. A lot of times it's simply a missed step or connecting something out of order. Do you have the user manual for the program box?

Did what you did turned it on and only getting red lines no numbers any advice?

@TJsRC

3 жыл бұрын

Something could be switched or not connected in the proper order. Some connectors will fit in the programmer both ways so make sure the POS, neg and signal are facing the correct direction if that's the case. Otherwise I would just suggest going back over the instructions and verify that you are doing each step in order. What ESC are you trying to program (not all of them can have their settings changed) and which programmer are you using?

@rcjoe406

3 жыл бұрын

@@TJsRC xerun xr8 sct with standard hobbywing program card

@TJsRC

3 жыл бұрын

@@rcjoe406 On Hobbywings website page for that ESC it looks like the "Multifunction LCD program box" is required for changing settings. I don't know for certain but maybe these do not work with the old style "program cards" here's a link to the one Hobbywing says will work with that ESC. www.hobbywingdirect.com/products/lcd-program?variant=1181193952 You can easily find them on Amazon and eBay. Your local hobby store might have some or be able to get as well. Maybe a local member of your RC community has one you can borrow to see if this is the problem before buying one for yourself.

@rcjoe406

3 жыл бұрын

@@TJsRC cool I'll check it out thanks for your help

I cannot get either cards to work. Connecting esc is all I get.

@TJsRC

11 ай бұрын

What model ESC are you trying to program?

@sonofevil77

11 ай бұрын

@@TJsRC 10bl60 and xr10 pro

@TJsRC

11 ай бұрын

@@sonofevil77 First double check all your connections and that the esc cable is plugged into the port on the programmer labeled "esc" and not the alternate power one. Then after it says "connecting esc" does anything happen when you press the "item" button?

@sonofevil77

11 ай бұрын

@@TJsRC I've been trying everything, I guess if it's not throttle calibrated it will not connect but I've triple checked that. Even the simple lcd one doesn't connect. It's making me crazy. I can program with the button on the power switch but adhd and all I have no focus ha.

@TJsRC

11 ай бұрын

@@sonofevil77 do you have any other hobbywing esc's that you can use to verify your programmer works? Otherwise it sounds like you are doing it right and I don't know what else to recommend. If the esc in question is relatively new I'd contact Hobbywing customer support and see if they'll replace it. Being able to use the programmer card and lcd box are bigtime features if it's not working maybe they'll work with you to make it right.

My card came on 1 time smh

@TJsRC

8 ай бұрын

If it's still new message Hobbywing customer support and see if they'll replace it. Or check with whatever Hobby shop you got it from to see if they will.

That program card doesn't work with my Ezrun esc Why is that ?

@TJsRC

3 жыл бұрын

Do you have power to the ESC turned on? Also make sure that you don't accidentally have the wire lead from the ESC plugged in to the card upside down. If that doesn't help do you have a different ESC to connect the card to to verify that it's working?

@MrRdizzle01

3 жыл бұрын

@@TJsRC Yea mate wires all connected correctly I went and bought the correct plug to put in esc fan power on esc Plugged it up correctly to program card I get power on the program card but lit up lines on screen no program numbers or anything Esc is exact same as your fresh from hobby store not used as of yet Thought ill give your way a try rather than programing it all manually Not sure why it isn't working as I can see on your KZread video it's working and has worked for others also

@TJsRC

3 жыл бұрын

@@MrRdizzle01 Maybe the card is faulty. I'm not sure what else to check. You could try emailing Hobbywing support to see if they have any suggestions.