How To Build A Small Patio DIY Cutting Round Edges
Тәжірибелік нұсқаулар және стиль
My favorite way to cut standard size 3.5" x 8" brick pavers DIY is with an angle grinder, brick chisel, or some other power tool with a masonry blade. Because the pavers are so small the angles are actually square, not round, which makes them easier to cut.
Mark the cut with a pencil by eye or by measuring. I like to do it by eye because it's faster and just as accurate.
Make sure to allow for about a 1/16th" thickness, which is about a saw blade, the allow for joint sand.
Once the cuts are all made, install the bricks, tamp them down, and install your sand. Then make one more tamping to wiggle the sand in place as tightly as possible.
www.gambrick.com
Пікірлер: 72
A pleasure to watch a guy who makes it look simple.
Geeez that is QUALITY work!!!!!
Nice work, very skilled!
Beautiful job.
GUARD, GUARD, GUARD.
nice work
Very clean work! Beautiful! 😁👍
He should be using a brick saw with water to prevent fine dust from getting into his lungs.
Dangerous, having no guard on the cutting machine.
@woodchopper7962
2 ай бұрын
That's called a grinder
@davidchi1277
2 ай бұрын
Well done for pointing that out to me. Still very dangerous without a guard.
@AstrixCloud
Ай бұрын
It's only a diamond where, you're more worried about the grinder having no guard than doing a dry cut with all that stone dust going everywhere 😂😂
@sciphan.
29 күн бұрын
The blade is very close to his fingers.
Beautiful work, clean lines....an absolute pleasure to watch! Thank you.
Please bevel the top of the cut to match the stock brick.
@harold6863
7 күн бұрын
Good spot👍
Beautiful!
Great video thanks 😊
Worth getting a block snapper if doing often.
Please can anyone tell me what he is laying it on? Sorry not in the trade. It looks really neat 👍
Make sure you take that 1/8-inch off for expansion
Looks ok to me!
Skills!
To make things fit cut them, I don’t know how I’ve managed all my life without this amazing work jack???
Nice.
Still love the hair
P. R. O. F. E. S. S. I. O. N. A. L.
EXCELLENT
@sparkfishes
2 ай бұрын
Use water if you want to live longer IT IS ILLEGAL TO NOT USE WATER IN THE UK
Use the damned safety guard on your grinder. What is so difficult about that?
👍🏿💯💯💯Clean
Enjoyed that cheeky bit of clean up at the bottom of the brick following the cut as the blade wasn’t quite long enough to go all the way through. Nice.!
Could have beveled the cut edge…. Just sayin
@martinthorogood6223
2 ай бұрын
Surely you mean "just typing " 😂
Someone should build a diamond blade rope cutter machine that’s the same size as a tile table saw.
Very satisfying to watch. 👍
I was watching some guys doing this in my HOA on a garage driveway . They were free styling there cuts and blowing tons of dust onto the neighbors yard and driveway o and their beau brand new BMW . Back in the day the tile guys would at least have a cardboard surround so the dust wouldn’t blow all over. Just saying.
@sparkfishes
2 ай бұрын
In the UK it is ILLEGAL NOT TO USE WATER ,
Dude probably tried to put the square peg in the round hole when he was a kid
use a wet saw and quit breathing that dust. That is what we Pros use.
Why do people usea grinder with the gaurd taken off, I've known too many people that cut them selves like that some very serious
@modernNeanderthal800
4 ай бұрын
To fit bigger disks
@woodchopper7962
2 ай бұрын
Because it gets in the way
@MyVeryHappyDay
2 ай бұрын
Because you do not really know anyone that has cut themselves with a grinder.
@NathanMcClintock
2 ай бұрын
And how he holds that brick while cutting! Madness.
@jeffschmelzer1592
2 ай бұрын
65 never cut myself. Because of people who shouldnt be using power tools and sue happy people. Osha jumps in and has many unnessesary rules. Like on a perfect nice gun having warning label stamped on barrel.
Nice work 👍
Use water if you don't want to get silicosis IT IS ILLEGAL TO CUT WITH OUT WATER IN THE UK
💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯
I was trying to cut one but I couldn't find one with a rounded Edge
@martinthorogood6223
2 ай бұрын
You need to buy a grinder blade that cuts circles ...
Don't breath in the silica
What kind of blade is he using?
@Gambrick
2 ай бұрын
It's a Dewalt 4 1/2 in. diamond masonry blade for dry cutting. amzn.to/3JzuqVT They're on sale right now on Amazon for around $6 bucks.
And then spend the rest of your life getting the moss out 😂😂😂😂
Thanks but that seems obvious to me and I am a total wombat at most things.
I cant take you serious when you are useing a ryobi angle grinder
@woodchopper7962
2 ай бұрын
Ryobi cordless tools are the shit
haha sand 100% does NOT seal anything and this is precisely why others have to come back and fix your work later.
How to build an ant farm
Bro a true mason would score it and snap it before you could even get your grinder out.
Really..people actually put a tutorial about this simplest job..joke
Good luck with all those weeds
you mean flat not square
@stevec4471
2 ай бұрын
Straight
@Raul28153
2 ай бұрын
@@stevec4471 ok straight
Not very good cuts.
What a load of garbage
And then cut it with no guard on the blade so when the blade fails you get to have some free stitches in your face and an eye patch for the rest of your life ..ffs mate ,have a word whith yaself..😮😮
Ryobi...dont hire these people