Working on building our Mudroom storage benches / hall trees Link to dust separator kit www.amazon.com/shop/hometowna... Email us at hometownacres@outlook.com
Жүктеу.....
Пікірлер: 124
@steenfraosterbro3268 Жыл бұрын
I love your comment about having pretty much all you need for your wood shop.....like that is ever going to happen.
@DDL2728
Жыл бұрын
😉😆😆😆👍
@HometownAcres
Жыл бұрын
Yeah I’m sure as we dive deeper into wood working we’ll be adding more equipment
@thereplacementfordisplacement Жыл бұрын
I thought I was a steel only fabricator until I got a house and went for it remodeling it. I learned that I was just a doer, doesn't matter what media wood, steel, plastic all you need these days is a will to do it and a budget for the right tools. As you get better you get better tools.
@SynteconlineAuSupplements11 ай бұрын
We have had this bench kzread.infoUgkxNuLbiXpLQ-mKH5NlyjrNe88hiCk2N3Cg for five years now and it is still holding up strong with minimal signs of wear! So much so that I decided to get another one to store other stuff. The first one is still beautiful, strong and is easy to clean. It’s been in our living room and we store toys and blankets in it and it really holds quite a bit of stuff. I purchased a similar one two years ago from Aldi and let me tell you that one fell apart in less than six months of use. Get this one if you’re looking. Seriously worth it. Five years already and I can’t believe it looks this good and has held up for the price! Awesome bench, the new one I just got is identical.
@russdixon614 Жыл бұрын
That cross cut at 4:48 is one of the most dangerous cuts to do with table saw, massive potential for a kick back,
@ralpharvin2668 Жыл бұрын
You and your family are loved! It's heartwarming to see others comment with well-wishes and prayers for you all and the soon to be born baby. I'll add my prayers as well. Thanks for your videos and for sharing wholesome entertainment the way you do.
@OneEyeCustoms Жыл бұрын
Nice job!
@TedErhartCFP Жыл бұрын
Adam, recommendation...put together a playlist for you remodel/addition. I was just telling my wife yesterday, "you've got to see how this guy on KZread added on a mudroom and garage."
@Tdale85 Жыл бұрын
Good luck with the second baby! Great video again.
@sweetjesus697 Жыл бұрын
When I was an apprentice carpenter I was getting lazy and comfortable with the table saw, I was cutting down some architraves and moved my hand over the blade to catch the off cut on the other side and didn't lift my hand high enough, I didn't lose a finger but it grabbed my thumb and cut down the middle to the bone, hurt like a b!tch and bled like a pig. Exciting time with the new baby mate! I'm up to 5 sons, keep em coming brother.
@mikewatson4644 Жыл бұрын
Glad to see that you are not afraid to purchase older tools. They may not have all the bells and whistles of a brand new tool, but they are usually capable of producing good results. In some cases, tools from yesterday were built with more weight and are more solid when being used. I bought my table saw in 1975, it still performs flawlessly. I wouldn't trade it for a comprable one made today.
@tyridewtcclb Жыл бұрын
Amazing job Adam! Love it!
@michaeln597 Жыл бұрын
Well done Adam enjoy watching your videos congratulations to you and your wife on the baby stay safe
@bpmunroe Жыл бұрын
Looks great on camera. In case you didn’t know, you are going in from the wrong side with the pocket screws. The screw is pointing towards the corner of the piece you are screwing in to, leaving very little wood on either side of the screw and making a weak joint. Instead of the pocket hole being on the inside, they should be on the outside, screwing away from the corner of the other piece. Cosmetically challenging with the pocket holes on the outside but it looks like they would be hidden away on your project.
@vlookup_tim Жыл бұрын
Very nice. Looking forward to more projects.
@phillipbryant5865 Жыл бұрын
Great job Adam!!
@welderman1221 Жыл бұрын
Good stuff Adam!!! You have become a woodworker!!!!
@randyclyde4939 Жыл бұрын
A great start to my Sunday morning! The project came out very nicely and I applaud you for your economical approach to tooling up your woodworking efforts! Prayers for the new one and for your spouse as this exciting new chapter arrives! Thanks for another great video, stay well and stay safe!
@balljar7546 Жыл бұрын
Great work Adam. Thank you for sharing that with us.
@granitestatewoods2601 Жыл бұрын
I am completely impressed Adam. Todd at GSW.
@michaelmullins1290 Жыл бұрын
I think you did a great job. You got a lot of great friends. That's a must in life. I'm sure you're a great friend too. Praying blessings around the birth of your new baby. God bless you.
@SpicerDesignsLLC Жыл бұрын
Great job Adam! Looks perfect in the mud room.
@joseph71052 ай бұрын
Great job, almost as good as the pros and you saved lots of money. My wife made one of these built-ins for the house last summer.
@BobEstler Жыл бұрын
Good work Dad.
@joelauda7501 Жыл бұрын
Great job Adam.
@douggibson9084 Жыл бұрын
Great job Adam 👍👍.
@davidtesta1361 Жыл бұрын
Congrats on your soon to be new addition to the family! Great work on the hall tree. As always, inspiring to watch!
@blakeroni Жыл бұрын
Looks very nice, great work with this project! And you're closing in on baby #2! Our second just turned one and everyone keeps saying don't blink. Enjoy the early stages, they're very fast and always changing. Prayers for healthy momma and baby and a smooth delivery. ❤️
@davesauerzopf6980 Жыл бұрын
You continue to amaze me with what you are able to do and learn how to do. Very nice job and as always, great video.
@richardbrowne1679 Жыл бұрын
It looks great Adam 👍
@terrypomatto907 Жыл бұрын
Beautiful work, I enjoy the video and the process that you used to make the finished product. You don't have to be a professional to make a product that you are proud to display, satisfaction of completion of the product is your reward and a plus is your mate being as happy with the product that you produce as you are.
@outsidewithrodney8240 Жыл бұрын
You did a awesome job!!!!
@kingwood4357 Жыл бұрын
Nice looking wood shop 👍
@phatmhan69 Жыл бұрын
Great job!. The bench came out great!. Keep up the good work, and hope everything goes well with your new addition when it's time.
@toddincabo Жыл бұрын
👍 nice job
@dsbennett Жыл бұрын
We need a hall tree and I like this one best of all. Great design.
@frijoli9579 Жыл бұрын
Nice build! I was glad to see the riving knife on there after a while.
@diogor420 Жыл бұрын
Congrats on the new baby!
@boblynn1881 Жыл бұрын
I think you did a great job on the new project. Praying for you and your wife on the arrival of your second child.
@jimwiskus8862 Жыл бұрын
Hi Adam! Man you slammed this project to the mat. You are right it looks perfect from here. That said you can always look back at this project after completing future ones to see how you’ve grown. I love the new tools you have purchased. Maybe in a future update you can do a review on your new woodworking tools, likes & dislikes. See you in the next installment.
@johnkirby6547 Жыл бұрын
Looks good Adam and can't wait to see your next project.. Congrats on the new baby and hope all goes well.
@erikceballos7933 Жыл бұрын
Love it great job Man!
@PurpleCollarLife Жыл бұрын
Great project!
@cgsoutdoors_professor3883 Жыл бұрын
Great job; can tell you’ve been thinking about this project for a while
@ozzinator20136 ай бұрын
Awesome video thank you 🙏
@jamesgaul1022 Жыл бұрын
Looks great Adam. It's a nice addition to the mudroom. Hope everything goes well with the birth of your new child.
@toddpacheco4748 Жыл бұрын
Great video Adam 🏠is starting to come together
@carlwhite8225 Жыл бұрын
Adam, Congrats to your family for the upcoming Baby, Nice job on the project.
@l.j.b9863 Жыл бұрын
Excellent for your first real wood working attempt mate, that's a nice piece of furniture you have built.
@bluebirdhomestead Жыл бұрын
I’m getting ready to build one of these in our house, sometime this winter. Getting some ideas here. Thanks! -Ryan
@brantz648 Жыл бұрын
Film the next one! This was fun to watch. The one that's going in the other corner will be just as interesting, if not better.
@stevesedgwick5789 Жыл бұрын
Good job
@hanzon Жыл бұрын
Handy man 👍
@johmsparks9708 Жыл бұрын
Good job! You have to start some where. ❤
@andydsimmons Жыл бұрын
Way better than the box store buddy. Great work
@vittoesmith1 Жыл бұрын
Just remember you made it. I think it looks great. Like the fact of using the Kreg system. Keep it up.
@bobthebuilder6315 Жыл бұрын
Nice work Adam glade to see the project turned out very nice. Also likeed seeing you useing the new tools the ( red ) ones great work, your friend from the HD.
@briant9764 Жыл бұрын
very nice
@dianahenderson Жыл бұрын
We can be our own worst critics when it comes to making things...you did a really nice job on the cabinets...I was wondering how long it would take you to enter into woodworking after you bought the sawmill. It is a wonderful hobby!!! Hope you enjoy it for years to come!
@JimFinlayson Жыл бұрын
Nice video
@sawsurgeon Жыл бұрын
Great start to your shop Adam, way to go shopping the deals on Marketplace👍🏼 Praying that the delivery goes well for momma and baby! Bless’ns to ya, Tedd
@HometownAcres
Жыл бұрын
Thanks Tedd
@botabob Жыл бұрын
Adam, here is a challenge for you. Make two identical plywood panels 12”x12”. Paint one with your sprayer and the second with a six inch foam or short nap roller and see what difference in the finish. Personally, I really like the rolled on finish. Great job on the mud room coat racks.
@yakbranson Жыл бұрын
Hey Adam! Just a suggestion. Mount some 2x to the saw horses. That way you cut and never need to stop. Replace when needed
@David-qd3ff Жыл бұрын
Track saw and a sheet of styrofoam insulation is the best way to breakdown sheet goods.
@michaelfarinola5044 Жыл бұрын
Doug's vacuum, with a cyclone works fine for me.
@danielwillliams9669 Жыл бұрын
Great video as always. Awesome editing and content. FYI - I think they make a Router Attachment for the table saw. Thanks and congrats on the new edition.
@markknister6272 Жыл бұрын
That jointer 6” will still take your fingers off… :-o. Good start on the shop!
@CharlesReiche Жыл бұрын
I got an old unisaw and attached a router table to it and bought the long mobile base. I can push it around but it does live in one place in my shop. Next step is to add a fold down outfeed table to my table saw. I have those harbor freight rollers and they are useful but an outfeed table would be great.
@DavesRetirementProjects Жыл бұрын
Really nice project. Passes the 10ft rule. If you can't see it from 10ft away, it's not a defect. One bit of advice, put a band saw and a drill press in your wish list. You won't regret it. Best of luck with the soon to be new addition to your family.
@micahwarnock71011 ай бұрын
I bought a track saw and now I use it more for the fine fnishing than my tablesaw..
@benjaminknowles5385 Жыл бұрын
Good luck to you mate on the next one, if you're on the fence film it we'll watch it
@kipcudd7253 Жыл бұрын
I bought 1 sheet of 3/4 plywood the other day at Lowe's $77.00, I liked to had a coronary! My little 6x10 extension is gonna take a while to finish with these costs.
@robertwazniak9495 Жыл бұрын
Do it yourself IKEA furniture. Looks great and fits perfectly.
@robinluich6626 Жыл бұрын
I need to make this plus a tower cabinet on both ends
@johncollins500 Жыл бұрын
Shop looks great & your hall tree is super!!!!! If I may make one suggestion Adam, when you get your router, look for a good router table. Hope the little gets here soon. Until next time have a great day
@richardgreen5602 Жыл бұрын
Nice job....time to clean out that firebox of ashes!!!!! Happy Thanksgiving!
@GregsWorkshopOregon Жыл бұрын
Haha, here I was thinking 'bro, you need an edge guide for that saw'...
@jjohnson2553
Жыл бұрын
He needs some help on the table saw the way that wood kept pulling away from the fence.
@greenriverfarm2692 Жыл бұрын
Great job looks good. When you going to trim out your doors? Lol. I would recommend just 1x4’s painted white. Can get fancy with some wider strips up top.
@jeffpeters1014 Жыл бұрын
Tools come along with the projects, you have just started grasshopper!
@DDL2728 Жыл бұрын
Impressive, Adam!! You missed the perfect chance to prank us - phone beeps, you check, it's your wife texting that it's time to get to the hospital!! 😳😉 I was really expecting that!! 😆 Your videos are so interesting & so worth watching - every single one!! Thank you!! God bless you and your family. I'm praying for y'all & your new baby!! 🙏💖🙏
@HometownAcres
Жыл бұрын
Thank you Dianne for continuing to tune in! Always love reading your comments.
@cattigereyes1 Жыл бұрын
Still need a solar, wind kiln! For drying that lumber!
@m9ovich785 Жыл бұрын
Next time you run the Table saw with that coiled up extension cord, see how warm/hot it got ? I have a picture some where, Where one melted into a big glob on a carpet with 1500 w heater. Thanks Adam. Mike M.
@mkgc4555 Жыл бұрын
It’s all nice dude, next time put some 2x across those horses to hold your wood from falling
@oldguyfirewood Жыл бұрын
You’re really mastering your woodworking skills Adam. Very nice job! I really like your wood stove. What kind is it?
@HometownAcres
Жыл бұрын
It is the englander 2400
@rickvanskike669 Жыл бұрын
Hey Adam, first and foremost, congrats on the soon to be new family member!! Now, don't forget to spoil Lana for the rest of your life!! I firmly believe a happy wife does lead to a happy life. Getting ready to mark 36yrs married. What brand and model of track saw is that? I'm looking for an affordable track saw. I have a straight edge, but it is only 5ft long.
@raymondrussell500 Жыл бұрын
Add a good router table along with the router.
@BarbieLove5 ай бұрын
How high from the seat did you put the hooks? Thanks
@ChuckP25. Жыл бұрын
Hey SawStop - send Adam one of your job site saws.
@petenelson8136 Жыл бұрын
Nice mud room bench. Looking forward to seeing how your shop comes together I'm in the market for a track saw, what made you decide to get the Grizzly?
@HometownAcres
Жыл бұрын
Reviews and price. The Grizzly was very accordance and should do everything I need it to
@nickjm37fordel1 Жыл бұрын
I would not have thought the spraying of the caraccas would have worked in the cold of the snow. Nice job on the whole project. Glad to see you made the deadline :-)) Is the top cabinet part just sitting on the bench ?
@HometownAcres
Жыл бұрын
Yes but it is secured to the wall
@nickjm37fordel1
Жыл бұрын
@@HometownAcres Great Job for first efforts :-))
@mikesgarage50666 ай бұрын
How did you attach the upper portion to the lower bench/seat?
@JohnSmith-tv5ep Жыл бұрын
ADAM, nice build! Did you buy the plans or draw up your own? Good job on the tool budget, but I'll help ya spend some more! LOL...Free standing drill press,. 14 in band saw... 36in Wood lathe.. 3hp plunge router and carbide bits. You got a great start on your shop, just a thought, buy good tools in the onset, they'll last your lifetime. "buy once, cry once" as you did with the chainsaw. Took me bout 20 years to get my shop to this point, but you'll need them when you open up new avenues in wood working. Stay healthy and congrats on your new baby!
@HometownAcres
Жыл бұрын
I found a picture I liked on the internet and took that and ran with it
@Garrett572xpg Жыл бұрын
Are u gonna match the stain color of the wood bench to the door trim? That would make the room perfect
@HometownAcres
Жыл бұрын
We’re going to go with white trim
@kodiham7532 Жыл бұрын
Great video! What grade of plywood did you use? B/C?
@HometownAcres
Жыл бұрын
Yes. It was $56/sheet. The cabinet grade stuff was $96/sheet
@levicurler4 ай бұрын
how do you attach the side panels to the bench. I guess I missed that.
@bdguth07 Жыл бұрын
Happen to have any plans for this build? Cut list, etc? I’ve looked but hoping I haven’t overlooked it. Thanks!
@AdamsMom921
Жыл бұрын
I am the planner for the benches… we looked at so many on Pinterest and found a few ideas from several that we used ideas from. I can tell you that the long sides are 15” deep and the seats are 21” deep with a 1 and 1/2” seat overhang. The straight bench was 74” wide with 3 equal cubbies. The L-bench is 84”wide and the short L was 44” wide. He did leave a good sized opening in the corner and reinforced that seat area with 2x4 support. He put 1/2 trim boards on the wall to create the look of cubbies and to screw the hooks into. Painted the wall white inside so it all looks like the same unit. Seats are 18” high. If you need any other dimensions- let me know. I am happy to help. Oh I also talked him into the crown molding on top! It has completely changed coming into the house to a comfy area
@brandonhoad9033 Жыл бұрын
Adam, since you have/ had one I'll ask u. Just got a holzfforma 372 and it's leaking gas B4 even trying to start it. Did you have similar problem or maybe later on even, if so what was issue? Leaks worse laying on side than sitting upright. Haven't looked hard yet, waiting for response from seller ( got on ebay ). Or maybe anyone reading could shed some light. Thnx
@franciscovillazamorano95147 ай бұрын
What type of nail gun do you use?
@chris3m98 Жыл бұрын
Do you have a video on insulation your garage doors? If not tell me what you used & if you would change anything. Pray everyone & everything goes well with #2 baby & wife.
Пікірлер: 124
I love your comment about having pretty much all you need for your wood shop.....like that is ever going to happen.
@DDL2728
Жыл бұрын
😉😆😆😆👍
@HometownAcres
Жыл бұрын
Yeah I’m sure as we dive deeper into wood working we’ll be adding more equipment
I thought I was a steel only fabricator until I got a house and went for it remodeling it. I learned that I was just a doer, doesn't matter what media wood, steel, plastic all you need these days is a will to do it and a budget for the right tools. As you get better you get better tools.
We have had this bench kzread.infoUgkxNuLbiXpLQ-mKH5NlyjrNe88hiCk2N3Cg for five years now and it is still holding up strong with minimal signs of wear! So much so that I decided to get another one to store other stuff. The first one is still beautiful, strong and is easy to clean. It’s been in our living room and we store toys and blankets in it and it really holds quite a bit of stuff. I purchased a similar one two years ago from Aldi and let me tell you that one fell apart in less than six months of use. Get this one if you’re looking. Seriously worth it. Five years already and I can’t believe it looks this good and has held up for the price! Awesome bench, the new one I just got is identical.
That cross cut at 4:48 is one of the most dangerous cuts to do with table saw, massive potential for a kick back,
You and your family are loved! It's heartwarming to see others comment with well-wishes and prayers for you all and the soon to be born baby. I'll add my prayers as well. Thanks for your videos and for sharing wholesome entertainment the way you do.
Nice job!
Adam, recommendation...put together a playlist for you remodel/addition. I was just telling my wife yesterday, "you've got to see how this guy on KZread added on a mudroom and garage."
Good luck with the second baby! Great video again.
When I was an apprentice carpenter I was getting lazy and comfortable with the table saw, I was cutting down some architraves and moved my hand over the blade to catch the off cut on the other side and didn't lift my hand high enough, I didn't lose a finger but it grabbed my thumb and cut down the middle to the bone, hurt like a b!tch and bled like a pig. Exciting time with the new baby mate! I'm up to 5 sons, keep em coming brother.
Glad to see that you are not afraid to purchase older tools. They may not have all the bells and whistles of a brand new tool, but they are usually capable of producing good results. In some cases, tools from yesterday were built with more weight and are more solid when being used. I bought my table saw in 1975, it still performs flawlessly. I wouldn't trade it for a comprable one made today.
Amazing job Adam! Love it!
Well done Adam enjoy watching your videos congratulations to you and your wife on the baby stay safe
Looks great on camera. In case you didn’t know, you are going in from the wrong side with the pocket screws. The screw is pointing towards the corner of the piece you are screwing in to, leaving very little wood on either side of the screw and making a weak joint. Instead of the pocket hole being on the inside, they should be on the outside, screwing away from the corner of the other piece. Cosmetically challenging with the pocket holes on the outside but it looks like they would be hidden away on your project.
Very nice. Looking forward to more projects.
Great job Adam!!
Good stuff Adam!!! You have become a woodworker!!!!
A great start to my Sunday morning! The project came out very nicely and I applaud you for your economical approach to tooling up your woodworking efforts! Prayers for the new one and for your spouse as this exciting new chapter arrives! Thanks for another great video, stay well and stay safe!
Great work Adam. Thank you for sharing that with us.
I am completely impressed Adam. Todd at GSW.
I think you did a great job. You got a lot of great friends. That's a must in life. I'm sure you're a great friend too. Praying blessings around the birth of your new baby. God bless you.
Great job Adam! Looks perfect in the mud room.
Great job, almost as good as the pros and you saved lots of money. My wife made one of these built-ins for the house last summer.
Good work Dad.
Great job Adam.
Great job Adam 👍👍.
Congrats on your soon to be new addition to the family! Great work on the hall tree. As always, inspiring to watch!
Looks very nice, great work with this project! And you're closing in on baby #2! Our second just turned one and everyone keeps saying don't blink. Enjoy the early stages, they're very fast and always changing. Prayers for healthy momma and baby and a smooth delivery. ❤️
You continue to amaze me with what you are able to do and learn how to do. Very nice job and as always, great video.
It looks great Adam 👍
Beautiful work, I enjoy the video and the process that you used to make the finished product. You don't have to be a professional to make a product that you are proud to display, satisfaction of completion of the product is your reward and a plus is your mate being as happy with the product that you produce as you are.
You did a awesome job!!!!
Nice looking wood shop 👍
Great job!. The bench came out great!. Keep up the good work, and hope everything goes well with your new addition when it's time.
👍 nice job
We need a hall tree and I like this one best of all. Great design.
Nice build! I was glad to see the riving knife on there after a while.
Congrats on the new baby!
I think you did a great job on the new project. Praying for you and your wife on the arrival of your second child.
Hi Adam! Man you slammed this project to the mat. You are right it looks perfect from here. That said you can always look back at this project after completing future ones to see how you’ve grown. I love the new tools you have purchased. Maybe in a future update you can do a review on your new woodworking tools, likes & dislikes. See you in the next installment.
Looks good Adam and can't wait to see your next project.. Congrats on the new baby and hope all goes well.
Love it great job Man!
Great project!
Great job; can tell you’ve been thinking about this project for a while
Awesome video thank you 🙏
Looks great Adam. It's a nice addition to the mudroom. Hope everything goes well with the birth of your new child.
Great video Adam 🏠is starting to come together
Adam, Congrats to your family for the upcoming Baby, Nice job on the project.
Excellent for your first real wood working attempt mate, that's a nice piece of furniture you have built.
I’m getting ready to build one of these in our house, sometime this winter. Getting some ideas here. Thanks! -Ryan
Film the next one! This was fun to watch. The one that's going in the other corner will be just as interesting, if not better.
Good job
Handy man 👍
Good job! You have to start some where. ❤
Way better than the box store buddy. Great work
Just remember you made it. I think it looks great. Like the fact of using the Kreg system. Keep it up.
Nice work Adam glade to see the project turned out very nice. Also likeed seeing you useing the new tools the ( red ) ones great work, your friend from the HD.
very nice
We can be our own worst critics when it comes to making things...you did a really nice job on the cabinets...I was wondering how long it would take you to enter into woodworking after you bought the sawmill. It is a wonderful hobby!!! Hope you enjoy it for years to come!
Nice video
Great start to your shop Adam, way to go shopping the deals on Marketplace👍🏼 Praying that the delivery goes well for momma and baby! Bless’ns to ya, Tedd
@HometownAcres
Жыл бұрын
Thanks Tedd
Adam, here is a challenge for you. Make two identical plywood panels 12”x12”. Paint one with your sprayer and the second with a six inch foam or short nap roller and see what difference in the finish. Personally, I really like the rolled on finish. Great job on the mud room coat racks.
Hey Adam! Just a suggestion. Mount some 2x to the saw horses. That way you cut and never need to stop. Replace when needed
Track saw and a sheet of styrofoam insulation is the best way to breakdown sheet goods.
Doug's vacuum, with a cyclone works fine for me.
Great video as always. Awesome editing and content. FYI - I think they make a Router Attachment for the table saw. Thanks and congrats on the new edition.
That jointer 6” will still take your fingers off… :-o. Good start on the shop!
I got an old unisaw and attached a router table to it and bought the long mobile base. I can push it around but it does live in one place in my shop. Next step is to add a fold down outfeed table to my table saw. I have those harbor freight rollers and they are useful but an outfeed table would be great.
Really nice project. Passes the 10ft rule. If you can't see it from 10ft away, it's not a defect. One bit of advice, put a band saw and a drill press in your wish list. You won't regret it. Best of luck with the soon to be new addition to your family.
I bought a track saw and now I use it more for the fine fnishing than my tablesaw..
Good luck to you mate on the next one, if you're on the fence film it we'll watch it
I bought 1 sheet of 3/4 plywood the other day at Lowe's $77.00, I liked to had a coronary! My little 6x10 extension is gonna take a while to finish with these costs.
Do it yourself IKEA furniture. Looks great and fits perfectly.
I need to make this plus a tower cabinet on both ends
Shop looks great & your hall tree is super!!!!! If I may make one suggestion Adam, when you get your router, look for a good router table. Hope the little gets here soon. Until next time have a great day
Nice job....time to clean out that firebox of ashes!!!!! Happy Thanksgiving!
Haha, here I was thinking 'bro, you need an edge guide for that saw'...
@jjohnson2553
Жыл бұрын
He needs some help on the table saw the way that wood kept pulling away from the fence.
Great job looks good. When you going to trim out your doors? Lol. I would recommend just 1x4’s painted white. Can get fancy with some wider strips up top.
Tools come along with the projects, you have just started grasshopper!
Impressive, Adam!! You missed the perfect chance to prank us - phone beeps, you check, it's your wife texting that it's time to get to the hospital!! 😳😉 I was really expecting that!! 😆 Your videos are so interesting & so worth watching - every single one!! Thank you!! God bless you and your family. I'm praying for y'all & your new baby!! 🙏💖🙏
@HometownAcres
Жыл бұрын
Thank you Dianne for continuing to tune in! Always love reading your comments.
Still need a solar, wind kiln! For drying that lumber!
Next time you run the Table saw with that coiled up extension cord, see how warm/hot it got ? I have a picture some where, Where one melted into a big glob on a carpet with 1500 w heater. Thanks Adam. Mike M.
It’s all nice dude, next time put some 2x across those horses to hold your wood from falling
You’re really mastering your woodworking skills Adam. Very nice job! I really like your wood stove. What kind is it?
@HometownAcres
Жыл бұрын
It is the englander 2400
Hey Adam, first and foremost, congrats on the soon to be new family member!! Now, don't forget to spoil Lana for the rest of your life!! I firmly believe a happy wife does lead to a happy life. Getting ready to mark 36yrs married. What brand and model of track saw is that? I'm looking for an affordable track saw. I have a straight edge, but it is only 5ft long.
Add a good router table along with the router.
How high from the seat did you put the hooks? Thanks
Hey SawStop - send Adam one of your job site saws.
Nice mud room bench. Looking forward to seeing how your shop comes together I'm in the market for a track saw, what made you decide to get the Grizzly?
@HometownAcres
Жыл бұрын
Reviews and price. The Grizzly was very accordance and should do everything I need it to
I would not have thought the spraying of the caraccas would have worked in the cold of the snow. Nice job on the whole project. Glad to see you made the deadline :-)) Is the top cabinet part just sitting on the bench ?
@HometownAcres
Жыл бұрын
Yes but it is secured to the wall
@nickjm37fordel1
Жыл бұрын
@@HometownAcres Great Job for first efforts :-))
How did you attach the upper portion to the lower bench/seat?
ADAM, nice build! Did you buy the plans or draw up your own? Good job on the tool budget, but I'll help ya spend some more! LOL...Free standing drill press,. 14 in band saw... 36in Wood lathe.. 3hp plunge router and carbide bits. You got a great start on your shop, just a thought, buy good tools in the onset, they'll last your lifetime. "buy once, cry once" as you did with the chainsaw. Took me bout 20 years to get my shop to this point, but you'll need them when you open up new avenues in wood working. Stay healthy and congrats on your new baby!
@HometownAcres
Жыл бұрын
I found a picture I liked on the internet and took that and ran with it
Are u gonna match the stain color of the wood bench to the door trim? That would make the room perfect
@HometownAcres
Жыл бұрын
We’re going to go with white trim
Great video! What grade of plywood did you use? B/C?
@HometownAcres
Жыл бұрын
Yes. It was $56/sheet. The cabinet grade stuff was $96/sheet
how do you attach the side panels to the bench. I guess I missed that.
Happen to have any plans for this build? Cut list, etc? I’ve looked but hoping I haven’t overlooked it. Thanks!
@AdamsMom921
Жыл бұрын
I am the planner for the benches… we looked at so many on Pinterest and found a few ideas from several that we used ideas from. I can tell you that the long sides are 15” deep and the seats are 21” deep with a 1 and 1/2” seat overhang. The straight bench was 74” wide with 3 equal cubbies. The L-bench is 84”wide and the short L was 44” wide. He did leave a good sized opening in the corner and reinforced that seat area with 2x4 support. He put 1/2 trim boards on the wall to create the look of cubbies and to screw the hooks into. Painted the wall white inside so it all looks like the same unit. Seats are 18” high. If you need any other dimensions- let me know. I am happy to help. Oh I also talked him into the crown molding on top! It has completely changed coming into the house to a comfy area
Adam, since you have/ had one I'll ask u. Just got a holzfforma 372 and it's leaking gas B4 even trying to start it. Did you have similar problem or maybe later on even, if so what was issue? Leaks worse laying on side than sitting upright. Haven't looked hard yet, waiting for response from seller ( got on ebay ). Or maybe anyone reading could shed some light. Thnx
What type of nail gun do you use?
Do you have a video on insulation your garage doors? If not tell me what you used & if you would change anything. Pray everyone & everything goes well with #2 baby & wife.
Did you fasten the cabinet to the wall?
@AdamsMom921
Жыл бұрын
Yes! Had to get batteries for the stud finder 😊
Coat hanging algorithm