Just want to say I used this program set up in a heavy iron old iron works. I have hunted it a few times before. It’s has been heavily hunted over the years. I pulled out 11 coins. No silver or old copper but 6 nice old buckles. I was checking it with the mono. Also checked with tennka , sweeper. I have to say I loved it! Thank you so much!

Well worth the try, Thank you, it's a process but you've taken the time for us to get a great headstart.

@Nwdetectors

Жыл бұрын

Thank you so much! Yes, it’s a process- luckily trying things out that worked with the Equinox (toggling between single and multi-frequency) worked the same way- but with new and pleasant surprises! But man, the discrimination really threw me for a loop for a while there but I think this is the beginning of the answer🤗👍🏼

Thanks for describing discrimination and tone according to that! Helps a lot! 🙏 I also watched the previous video about settings. Great! 🍺👌

This was a great video, thanks for sharing. I did a similar video about if you take the DISC to 0 on a bottle cap and what I found at the beach and then back in PA. The iron goes away, at the least the sound. I am glad that you showed that test. I did a sub. Keep happy and detecting.

Thanks for the great tip.. will definitely work with it.

@Nwdetectors

Жыл бұрын

Thank you!!

Thank you for posting this video and the one on setting it all up. So far 3 out of 5 good targets to dig have been jewelry. The other 2 were coins. I have adjusted my high tones a bit down as it was blaring but I’m used to the 800 tones.

@Nwdetectors

Жыл бұрын

That’s so awesome! I’m glad your settings are yielding good results! Keep me posted on any discoveries😊

Brilliant. I will use this in the field tomorrow. I love the clarity that you gave to using the discrimination number of 10 in correspondence with a 100 Hz tone. I have a lot of trash in the sand that I metal detect on our local beaches, so I think reactivity is going to probably stay at 3.0. I use 6 for audio response but I may drop it to 5 for a more balanced approach, lately, I have been read that using higher numbers can actually create problems and mask some signals. See the manual on this one. I have had the iron volume on 0, but I think I'm going to try the opposite approach and put it on 3, @100 Hertz, and discrimination at 10 as mentioned. Bottle caps will stay at 5, dirty beach issues, and I have been nulling out 63-68 to account for pull tabs from soda cans, and while this eliminates most of them, it doesn't get them all but I don't want to interfere with good targets in other VDI range values. I am extremely interested in someone testing a platinum ring and the VDI numbers that it generates?

@Nwdetectors

Жыл бұрын

Hey! Thank you for watching and for the detailed reply! I think hearing your iron (albeit low so it doesn’t drive you nuts) will really help you begin to decipher nails. Between that and keeping my discrim at 10 (100Hz) I have dug way less iron. I also would like some platinum numbers! Happy hunting!

@LobsterClawzRecovery

Жыл бұрын

@@Nwdetectors no problem. The last video I did on South Beach, the one with a lifeguard stand in the thumbnail, I found all of those things with your settings. Four rings, a stud earring, a two-year-old piece, a bunch of change, and some other stuff. Pretty cool. Thank you. Also thank you for taking the time to share your settings.

Be aware that non ferrous and ferrous targets close together can drag the VDI numbers down and make them jump about. Training your ears is best practice. In time your remote can go in your pocket. Audio Response on 7 does give you more depth despite what the manual states. Also, on really trashy ground the non ferrous targets still pop through. A lower Audio Response, and the signals will be too faint to hear over the ferrous trash. The ground is still noisy either way. Leave on 7 for any programme you use imho. I've tried and tested it.👍

@Detect-Oregon

5 ай бұрын

How mineralized is your ground?

@Detect-Oregon

5 ай бұрын

What’s your silencer at?

without hearing the tones makes it difficult to follow the video.

@Nwdetectors

Жыл бұрын

Hey, thank you for watching! Actually if you watch further into the video I actually do show examples with the speaker on so you can hear the tones🙂👍🏼. I’ll try to do more videos with the external speakers on but sometimes I’m in a public park so it’s not as easy without annoying people nearby😅

@hubsi5263

Жыл бұрын

@@Nwdetectors understand, thank you Sir!

New to deus 2 that helps thank you

I’m no expert with the deus II, but I believe there is an audio setting that is user programmable for volume levels of the deeper targets. I left that setting alone on my machine to give me an idea as to the targets depth.

thanks for the video very intresting

Really appreciate this, thanks. I love my Deus 2 but I really do dig a lot of aluminum foil. I'll give this a try when Michigan's frozen tunda thaws 🙂

Great Vid. How to you switch so quick to single frequency?

@Nwdetectors

Жыл бұрын

Hi Steve! Please watch this video for the answer to your question🙂👍🏼 kzread.info/dash/bejne/eKdpzNpudZuTiZM.html

We will never know, but I am wondering if at 12:38 you found a 1943 Steel penny in a small spill. And I did watch a video of Calabash Digger in regards to changing the discrimination above 7; it is a very telling video that you probably shouldn't do that when dealing with iron.

@Nwdetectors

Жыл бұрын

Thank you for watching! So can you elaborate a bit more on what Calabash said? I really appreciate any input, I always try testing in the field and certainly don’t want to miss out on any goodies🙂

Thanks.

Will this work on the beach?

What version were you running back when you made this video?

@Nwdetectors

Жыл бұрын

Jerry, to be honest I’m not sure. However I am fairly certain it is one of the earlier versions since it was one of the first machines off the boat😊. Thank you for watching and happy hunting!

When you say you cross check by switching to a single frequency, what single frequency are you using to double check? Thanks for the insight.

@Nwdetectors

Жыл бұрын

Hi thank you so much for watching. So I left my settings and a link to how I do this in the video description. I’ll leave the link here for you too- happy hunting🙂🙏🏼 kzread.info/dash/bejne/eKdpzNpudZuTiZM.html

Thanks

I’ll give your findings a go, the Dues 2 on Multi frequency loves finding foil with good tones, but as you have shown I now leave 29 and 32 VDI as have dug a stack of them to confirm targets and if you program the D2 will find the tiniest 3mm x3mm super thin foil rapper and also 1.77 lead pellets, read a few comments on Utube saying D2 does not find tiny targets, well that’s simply not true if you add your own programs, as you have discovered it’s better to hear the iron, I have added a program and run discrimination on minus -6.4 and then can clearly hear that iron, on the Nox I run with horse shoe off so can hear the iron and with the horse shoe on it clips with non Ferris tones making you believe there is a good target there, love the D2 😀😀😀 PS. Yes I did watch his air test and was very interesting , this is where the D2 shines, as you have shown it can pick out the good targets amongst the iron, yes it takes experience and important to sweep and circle around to decide to dig or not but efforts are worth it. Both the Nox and D1 and D2 are excellent machines but take some learning to get proficient in using them to get the best out of them, thanks for sharing 😀😀😀 With all your experience with a Nox can you please do a video showing how you discriminate the iron as you say you hear a squak, love to see that and run the D2 over same target to see your thoughts 😀😀

@Nwdetectors

Жыл бұрын

Hey thanks for watching! Yeah I use the Nox with the horseshoe off too🙂. If my setting are confusing I wrote them down in the description section of this video🤗 Let me know how toggling between single and multi-frequency works for you- happy hunting👍🏼🙂

@joe0847

Жыл бұрын

Will settings change at the beach?

@Windsurfingaddict

Жыл бұрын

@@joe0847 well you are best to run either machine in your preferred beach settings and leave alone or change setting if you know what each setting does 😀

@Nwdetectors

Жыл бұрын

@@joe0847 I would say the same, use preferred beach settings, I would be digging almost everything too at the beach as the mineralization will alter even the best targets and make them sound much different than they do in parks.

We know that discrimination makes the model shallower, but when we set discrimination to 0 or negative, and the night to 7 or 10, does the depth still decrease? In other words, in your opinion, does the night decrease the depth?

I have used these settings prior to seeing your video and they worked for me. 100 Hertz, three or five tones, iron volume three or greater, reactivity 1.5 etc I am metal detecting on the beaches here in South Florida we're aluminum is the metal of the day and after a while you can hear the difference between aluminum and for example, a quarter in the tone that each of them make. Occasionally large aluminum like a shredded aluminum can, will fool me and there's little I can do except keep trying. Some bench testing with an aluminum can, and the single frequency at 7.5 did not help me discern the aluminum from a good target. Any ideas?

@Nwdetectors

Жыл бұрын

I also get fooled by ‘certain’ aluminum… It’s not perfect, but it does help me filter out ‘some’ trash. Large aluminum like buried cans is virtually impossible to eliminate, as You’ve probably experienced when it’s deep it sounds really good😢

@LobsterClawzRecovery

Жыл бұрын

@@Nwdetectors aluminum is a monster to try to eliminate. I actually have an idea that I would love to use to build a metal detector that actually detected aluminum. Wouldn't that be cool. Anyway, you can always scrape out a target and then detect it again and see if it changes it's tonality from side to side left to right. Recalling that you should detect it from several angles but often those really huge targets are going to be booming even at depth and that can be an indicator unless pirates have recently been on that beach, and have deposit a treasure just is likely an aluminum can. Cheers.

@1442GlennLane

11 ай бұрын

Quite often aluminium will give off a loud high pitch, but will have a buzzing edge to it. If you try to disc it out, you'll disc out silver coins.

Put park in,reject bottle caps

Liked video. It would be great for you to let us. Thank you listen to what you’re listening to

are you not getting the numbers because the item is near the surface

I set everything up and I’m a little bit confused because I set everything up in three tones but then how do I add pitch ? I assumed it was one or the other… I just went in my yard which I have detected for over 30 years and just found two pennies however I have a lot of jumbled chatter …possibly my EMI is high today… I will be going to a park tonight to check it out I did try to lower the sensitivity but I did take it all the way down to 68 and still hear a ton of junky noise but the targets are nice and clear.

@Nwdetectors

Жыл бұрын

Adele, I’m so sorry! I’m going to make another video with my settings step by step hopefully tomorrow. I got Covid last Monday and have been stuck in my bedroom the whole week😢😩🤕

@adelelamperskirutherford

Жыл бұрын

@@Nwdetectors oh no!!!! I hope you are turning the corner and feel better. My basic question was at first I set it up with three tones with the different tone brakes etc. but then was unsure if I was in pitch mode or if I had to click pitch which essentially in my opinion with disregard the changes I made with all the tone breaks. I am not a scientist just a grandma who loves Metal Detecting ! Get well soon sweetie pie!

@adelelamperskirutherford

Жыл бұрын

Sorry I was voice texting I know some of the spelling is not up to par!

@Nwdetectors

Жыл бұрын

Adele, here is the settings video just out! kzread.info/dash/bejne/eKdpzNpudZuTiZM.html

@adelelamperskirutherford

Жыл бұрын

@@Nwdetectors Thank you so much I actually set up a third program with the exact same settings right next-door to these two and then I use the XY screen so I can toggle between all three.

I love my XP

Needs to explain the screen and its setup and its functions to really appreciate the video for a beginner,before purchasing a detector.

88 is a pound coin in the uk

Iron volume is more of a dissemination ....deep iron will give you a false tone .. why ..

You rely on the screen too much. Big gold rings on edge will not give solid numbers.

Nice Post 1 go where cows go to pee its read 23 on the deus

@Nwdetectors

Жыл бұрын

Hahaha, I love it🤣. Thank you so much for watching- happy hunting👍🏼🤗