Bro.. I just got a pair for Christmas and was wondering why they wasn't sharp like at the barbershop.. but you saved the year.. thank bro!! 💯 💯 💯

@Keith4Childs

11 ай бұрын

😂😂

@JonathanDennis-gb9wz

13 сағат бұрын

@@TheGreatest-4Eva yes he did

@CEONTHEMAKING I have been cutting my own hair for OVER 30 yrs..NEVER knew how to do this until TODAY...THANK YOU for sharing this info...bc this makes a HUGE difference!!

@CEONTHEMAKING

3 жыл бұрын

✌🏽

HELPFUL AF‼️‼️‼️ 20 YEARS AND I’M FINALLY JUST UNDERSTANDING THIS ‼️‼️ Much Appreciated King!

this is the only video ive ever seen explaining it right

Your the only one to explain this procedure in a fashion that you can actually understand step by step without it being to complicated 👍🏿

@ellisjackson3355

Жыл бұрын

How complicated can this get? Videos that make it seem complicated are just trying to make it seem like black magic to deter people from learning how to do it themselves

9 years later u still the man thanks brother

You are the only one explaining this in detail and correctly. Thank you. 😊

Great video!!!! I've been cutting my hair for years now. I think that i wasted a lot of money throwing away old Andis T outliner. Never knew how to adjust correctly. Thanks Man. Your video will save me a lot of money in the future.

I just got done adjusting my T Outliners blade. I ran my finger across them. Smooth like you said Bawse. Thank you very much.

@CEONTHEMAKING

9 жыл бұрын

That's wassup. Good luck! Practice makes perfect

@victormagana8165

7 жыл бұрын

Tario Thornton uhh

Dude...in the days of quarantine, I needed this info. Been having to trim my own hair and beard ....THANKS!

@SouthG301

3 жыл бұрын

Big facts bro....big facts, my grooming needs to be addressed, I'm coming outta quarantine and getting bk to it

This video gave me the confidence to adjust my Andis blade; not because it was not cutting close enough, but because it had become misaligned with use and rougher and rougher so that I could no longer stand it. It is running smoother than it has in years now. Thanks.

you just saved me money and time. Thanks for knowledge sharing.

Thanks for the clear and concise tutorial. Short, sweet and to the point.

@CEONTHEMAKING

9 жыл бұрын

No doubt!

@myi6903

6 жыл бұрын

Yup great job explaining A+.

@umarabdul-ali6868

4 жыл бұрын

Agreed big time

Wow thanks for this video it solved my problem . With my t-liner and now I feel the difference . It also has made me realize why I was getting razor type burns after getting a line up at a local barbershop .

I was about to buy a sharpener and/or a new T-outliner. Thank you Thank you. They work just like they did 10+ years ago

Thank you for the quick, simple, and close-up explanation. I've been baffled by the blades on my trimmers for years.

@screwball34

9 ай бұрын

Same hear! Im ashamed to say how long I didn't realize this

The best video by far! Excellent explanation of blade adjustment out of all of the videos and it is a textbook example for zero gaping yet! Ten thousand likes bro!

@umarabdul-ali6868

4 жыл бұрын

I totally agree with you. Straight and to the point.

Thank you for the explanation. Adjusting mine tomorrow

A friend of mines adjusted my Andis T-Liner and I went to use it today for my baldy. My dome looks like a bruised apple. I was wondering why it hurt harder than this chick in high school who broke my heart. Good video man. About to get this done in the morning.

@CEONTHEMAKING

9 жыл бұрын

Android300ZXNA LOL....yea, definitely don't want to adjust them too close!

@undertharock

6 жыл бұрын

Hahahahahhaha

@3rdzodiac

6 жыл бұрын

😂😂

Thank you for keeping it simple with the breakdown. My clippers are 🔥 now

Just wanted to say thank you. Finally picked up a pair of these for personal use after years and this was the first video I found that explained it easily. Mine are working right now. Appreciate you bro.

Excellent explanation, concise, quick and to the point Great job

How come you the only one explaining this. People just say take blade off and adjust. They didn’t want people to win. Appreciate you 🙏🏽

Precise and straight to the POINT . You snapped bro keep going I’m supporting the channel.

This is the best video ever. I did this exactly how u said and now it works beautifully! Thank you

@CEONTHEMAKING

4 жыл бұрын

no problem

Thanks bruh! Not a barber, but I use Andis on my facial hair. Very helpful!

Thank you, man. I inherited these from my late brother and I could figure out why they didn't cut as close as they did when he used them.

Still useful in 2024!!! Salute !!

Just got my machine Friday and this video is loud and clear salute

Thanks for the upload

AWESOME!!💯🌍 did not know that was adjustable.

Greatly appreciate this tutorial. I now have a pair of perfectly working clippers, and originally thought I needed to get some more.

Props bro! I nearly bought a new toutliner. This video saved me some 💰 💰💰

I agree with @Frankie. What helped the most for me was how you did the part adjusting the under blade while leaving it loose. I wasn't doing that and was getting frustrated because they didn't cut close and they made a lotta noise which is usually an indication its misaligned i believe. Thanks for the video.

Fam Ive had my andis for about 2years I never knew they are adjustable I followed the video exactly! My lady says to me o lord he's playing with his toys I said these aren't toys they're machines. I have a little collection aw man thanks!!! I tried em a little bit aw man good lookn bro

@phesm4353

5 жыл бұрын

🤣🤣🤣🤣

Just got T-outliner replacement blades for the Andis-II. Will be doing this

Bruh, thanks so much for this informative info. I’ve been toying with these clippers trying to get them sharper. I’m excited to take them apart now.

Very clear and concise! I like that part about angling it some. Very detailed, pun intended.

SUBSCRIBED... finally solved my 5 year problem...lol

Aye bro I preciate you fr. Just made mine barbershop ready! Normally would just replace my clippers but bought the replacement for $25 and it’s like new again after I dropped my andis clippers and the blade chipped.

Wow!!! I have been doing this all wrong for years and wondering why my results sucks. Good info.

THANKS! Straight to the point with good camera focus & angles

Thanks for the vid. Thought mine were dead. You showed me how to save them. Cuts are fresh again.

I appreciate the video. I attempted at home but this video with the flat surface trick was great. Thanks a lot

Dope🔥 straight to the issue

1st try doing it and already see a better much cutting resolution thanks a mil!

thanks for the video. This has to be the best video for the 0 gap blade. I appreciate it.

@CEONTHEMAKING

10 жыл бұрын

Thanks man, no problem.

Anthony Mackie just taught me how to adjust clippers lol appreciate that

Dope. I adjusted the blades on mine and sprayed it with olive oil.

Man I wish I found this like 2 months ago. This saved me. Much thanks

Bro just got my t liners today just finished adjusting them perfect thanks bro👍🏿🤟🏿

THanks Boss... I just purchased my 2nd pair bc the 1st just wasnt cutting like i wanted them to, the new Trimmers werent cutting as tight until I followed your steps and BOOM, Sharp Linez baebeeeee

@JetMuzikBeats

4 жыл бұрын

Now Im about to adjust my old trimmers and see if that was the problem!!! thanks Boss

@CEONTHEMAKING

4 жыл бұрын

fa sho!

Had to come back and comment again. BRA! My goatee is nice and tight. Not sure why the dislikes, probably didn't follow directions carefully and skipped the video. Again you are appreciated.

Very helpful video, really like the tip about putting it down on a flat surface. Thank you very much

Thank for teaching me how to adjust my trimmers they just how I want them

Im an idiot, i would just go and buy a new pair.. this dude saved me, thanks!! Now i have 4 perfectly fine clippers that just needed adjusting

@Seven_Aint_Nine

20 күн бұрын

Ahah. Me too. Ok going to buy some new blades, instead of new trimmer

Just tried your method and it works, this was a great video. Thank you

that's my dawg(smokey voice)

Great job this really helped me and I subbed . Simple yet resourceful info continued success to you

@CEONTHEMAKING

4 жыл бұрын

Same to you my brother.

Thanks! Very helpful… fixed!!

Thank you. Just what I needed! ✨✨

I just got a set of Andis T-Outliner and your video was very informative. I just thought you can plug em in and start cutting. (My own hair)

@CEONTHEMAKING

Жыл бұрын

You can...this is only if you want to adjust them to cut sharper.

@InSideOutMindz

Жыл бұрын

@@CEONTHEMAKING after watching your video my T's aren't cutting. I haven't adjusted them yet tho

THANK YOU SO MUCH...Lifelong Mystery resolved Bro!!!!!!

Fantastic video! Seems like common sense after seeing the way you did that. Thanks from one barber to another!

Thanks fam 👍🏽 I’ve owned these over & over for years and never knew how to make them sharp like the barber shop. I would buy new blades and they seemed duller than what I was working with … 💇🏾‍♂️

bout to save me another couple g's with this tip lol! thx fam! bought clippers for my sons during the pandemic and them jokers ain't seen the inside of a barbershop since! now they bout to get icy shapeups too?!? it's ON! 😂

short and precise. well done brother 👍

I been looking at some videos & this 1 worked in 1 try. came out sharp! on point bro Good looks!😎😎😎

I'm bout to tighten up my edge up soon as I get hm from work

Weird that nobody mention this you say move it up but from whose perspective? In others words do you move it up towards the tip of the blades? Or do you move it back towards bottom of trimmers? You also did it very quickly and didn’t actually show “where you correct position” should be?

Thanks my G I was about to order some new ones I ain’t think mine worked saved me $80

@CEONTHEMAKING

5 жыл бұрын

💯

Ceon you da man professor! My blade is perfect now and my dome lookin polished!..It's tight bro. thank you! :)

Mine are too sharp but this helped me adjust it thanks

I just bought the pivot pro Andis trimmers, and I was wondering does this work for the new/updated one as well? Because I noticed it hasn't been giving me the nice crisp/sharp outline I've looking for.

Thanks bro worked like a champ

Did this but mine still won't give me the sharp cut that i want. Is there something else I might need to adjust?

@MrMua74

8 жыл бұрын

yea i did this and it cut sharp yet it would hurt the person since it was to close, i see people use these on youtube and get nice crispy hair cutting noise and lines , for me not so much

@alanms1975

8 жыл бұрын

+E. VNDLL Same with me man. I've tried so many times, mirrors, steel plate, nothing works. Always slice my face up. I've seen where they sell a blade setter on line for like $30, I might just have to buy one. Sucks cuz everyone on line says this trick works great.

@MrMua74

8 жыл бұрын

+alanms1975 exactly, me and you are the odd ones out

@alanms1975

8 жыл бұрын

+E. VNDLL I just ordered a $15(with shipping) adjuster from Amazon that had real good reviews. It's plastic but only $15. I'll let you know how it works. It's called "on the money 10 second blade adjuster". Corny name but like I said, had great reviews.

@pnojazz

7 жыл бұрын

I bought the OTM blade setter. Perfect adjustment, but my GTX T liner still doesn't give a sharp cut. I'm wondering if that's because the blades haven't been sharpened. At this point that's my only remaining option to try to gain a sharp cut.

Bonjour la mienne attrape les cheveux lorsque j’attaque le dégradé même après réglages je ne comprends pas avez vous une solution par hasard 🙌

Damn bro, I jus changed my game fr fr💯

This vid got mine cutting great! Thanks man God bless! 💯👍🏾

Bruh u the goat I was bout to buy sum new clippers

i adjusted my blade the same exact way and i still cut my self up. any tips?

@CEONTHEMAKING

9 жыл бұрын

It may take you a few times to set it just right. Also, after give adjusted them, make sure you're not pressing too hard or digging into the skin. The weight of the trimmer is all you should really need when you're lining yourself up.

Awesome post! I have been trying to do this for the past two hours...

@martymardb7878

6 жыл бұрын

Olimpus H 😂😂😂😂😂

ive tried this way and still get cut

Is it possible to INCREASE the length it cuts. I'd like it to cut around 0.7 mm or 1/32 inches. I know there is a comb for 1/16, but I want 1/32.

Thank you sm for this! Fixed my problem🙌🏽

Hi, must I adjust the blade when replacing the it?

Your video appears to be on point and better than other videos one barber advised me to do this against a mirror but I like your advice much better. Salaam

@CEONTHEMAKING

4 жыл бұрын

Salaam akhi

@umarabdul-ali6868

4 жыл бұрын

@@CEONTHEMAKING Salaamu Alaikm

Perfect tutorial. My outliner's good as new.

Thanks boss, you really helped me out.

BRO TGANK YOU SO MUCH IM ABOUT TO GO AND ADJUST MY ANDIS RIGHT NOW

Thanks alot. Much appreciated for your time sharing this video.

Man let me share this with you I've owned the same pair of Andis outliner clippers for over 20 years I usually trim my hair and my two sons hair when they were kids now they're both in the military. I never knew these Clipper's could be adjusted thanks for the education.! peace

Awesome job...i just tried it out and now i gotta tight line.

Great video. Straight to the point!

Well I be damn we learn something new every day good looking out on the info

Great video bro. It worked to a tee. Thanks

what if the teo blades wont stay together my cutting blade keep fallong

how do you adjust the liners so that they don't lag? meaning, it seems like the cutting blade isn't moving back and forth properly.

great tutorial

Hopefully this helps me to get a closer shave. Thanks.