Right on! Great work Chuck!

@ChuckPippinBassFishing

6 жыл бұрын

13Fishing Thanks guys!

@ajsxtd

5 жыл бұрын

As a new 13 fishing combo owner, just wanted to say thanks!!

@topojost

Жыл бұрын

Can't thank Chuck enough for this! Just got a Concept SLD gen II and it's absolutely HORSE SHIT that I had to scour the internet to find a video explaining this. Line blew up about 15 times in a row and for the life of me I couldn't figure out how to adjust the spool on the inside. 275 bucks for a reel, I wasn't about to force anything or risk breaking it. Might wanna put a video or "how to" on your product website 13Fishing. Hell, i'd settle for a manual. At least shimano put recommendations of what setting you should use based on the line you're using on your Curado DC. Chuck, thanks again for doing what 13Fishing didn't do.

Man I really appreciate this video. When I first saw the reel I just knew I had to get it. I bought the reel and took it out to the lake. I then realize the dial isn’t on the outside like most baitcaster reels. I noticed the lever but didnt even learn how it was supposed to be adjusted. Iol. Now it’s all good and I can make far casts. Thanks a bunch!

@ChuckPippinBassFishing

4 жыл бұрын

No problem. Glad I could help! 👊🏻

Thank you, this really helped. I’ve always been a spinning reel guy. I recently won a baitcaster reel from 13 fishing and have been wandering how to properly use it.

Thanks for more great tips Chuck!!

@ChuckPippinBassFishing

6 жыл бұрын

No problem. More to come. Thanks for watching!!!

Thank you. That information solved my problem.

Thumbs up bro .. I will pass this on to a buddy who fishes concept.. solid video👊👊

@ChuckPippinBassFishing

6 жыл бұрын

D.Nasty Fishing Thx! I appreciate it. 👍🏻💪🏼

This video was a life saver - thanks so much!

@ChuckPippinBassFishing

Жыл бұрын

You’re definitely welcome. Glad I could help, and thanks for watching. 👊🏻

I'm a avid spin reel guy but just bought my first 13 fishing concept A2 baitcaster I've never used one before so thank u I got a rat's nest my second cast cuz I didn't know how to tune it

Hey man I really appreciate this video really help me out a lot keep them coming.

@ChuckPippinBassFishing

4 жыл бұрын

+Curtis copeland No problem! Thx for watching, and glad I could help. I just put up a new video a few minutes ago!

Great video sensei !!! Good info !

@ChuckPippinBassFishing

6 жыл бұрын

CAJUN Rob Outdoors lol. Thx Grasshoppa!

Thanks, this is probably my issue. Every bait caster I have has the magnetic breaks I forgot all about the centrifugal breaks. Will take a look today.

Just got a radioactive pickle and this was very helpful.

You're so right !!!❤

Thank You! 👍👍

verry helpfull video thank you

@ChuckPippinBassFishing

5 жыл бұрын

Jimmie Glass you’re welcome! Glad it was helpful. 👍🏻🎣

good points.

@ChuckPippinBassFishing

6 жыл бұрын

les pastewski thx Les!

Awesome info

@ChuckPippinBassFishing

6 жыл бұрын

Jerry Fischer Thx Jerry 👊🏻

@jerryfischer6387

6 жыл бұрын

Chuck Pippin yes sir

Great video! I just don't understand why baitcasting reels can't come with a quick setup guide like this. This brake was a little different than the centrifugals I'm used to and this is my first 13 Fishing reel. Great video, it's just sad I had to come to youtube to set it up.

You helped me so much I was about to throw my bay casters break it

@Queer494

3 жыл бұрын

Fucking stupid ass

My concept z I set to three and set the spool tension as always the same as you do here and haven’t had to change a thing. My inception SZ (12lb floro, M/mod-fast rod) even with brakes on 4 or 5 and spool tension set anywhere wants to backlash every other cast unless heavily thumbing the reel, and then doesn’t get much distance. Tried a few different lures and a slightly heavier one seemed a bit better but still giving me trouble after about 3 hours of use between two days now, any tips?

I just got the inception and I put braided line on it. Should I still start at 5 or wad that just for mono?

hey chuck. can you do a video about how to oil the concept z

So I have a Origin FT bait caster, I've had it for 4-5yrs. I can not find the break. I have the tention knob, I have the drag knob. Any help at this point will be good. Thx

Hey I have a question. I have one of those 13 fishing reel and every time i cast squick. Do you know why

I just got a 13fishing concept tx3 yesterday. I went out and make a few cast and it bird nest over and over and over again... maybe im not used ot its side break yet. Also there's not many video about the tx3

@ChuckPippinBassFishing

10 ай бұрын

The settings should be about the same. Try turning the dial all the way up to 6 and tightening the tension knob. Better to start off with it too tight than too loose.

I know this is old. I have a 13 concept origin tx with 30 pound braid what about the adjusting the sprocket brake?

Chuck, I had asked you a few months ago about my new Concept c2 reel making noise on the cast and you replied with some suggestions. It never got any better and I would like to send it back to the company for repair or replacement. I called 13 fishing a few days ago and left a message and they never called me back. Where do I send it and should I leave the line on the reel?

I have a new origin from the fate black combo, when I look at the brake control system I see the pin however it won’t budge when I try pull it out.

@Bored00m

5 жыл бұрын

put your one thumb on the spool shaft so it cannot move and turning the dial should be easy

How do you lower the brake system back down from 6 to 3

So increasing the number will result in lest birds nest? I got this real about 8 months ago and haven’t used it more than 3 times. This was my first and last bait caster I got lol. It’s just been sitting on my desk cause it looks pretty haha. And I’ve been thinking about giving it another try. I never opened it and when I did after watching this vid it was set on 0.

@ChuckPippinBassFishing

4 жыл бұрын

Jr yes, they come out of the box set on “0”. I’d suggest turning it up to 4 or 5 and tightening the tension knob down a little. As you get used to it, you can loosen it up a little.

After watching this video I subscribed to your channel because you explain things logically I have a question for you however I have a 13 concept baitcaster and every time I reel in the line it fills the spool up crooked is there any way to adjust this to make it feel more evenly meaning one side of the spool has more line on it than the other

@ChuckPippinBassFishing

5 жыл бұрын

+Chris Puglisi Thanks for the sub! I’m not sure why that would be happening, unless the worm gear is not going back and forth while you’re reeling.

@MoniqueTrentREALTOR

2 жыл бұрын

I have the same issue with mine!

Hi there..just got a new concept a3 for swimbait fishing. Saw your video. I have a question and hopefully you have time to answer me. I will be using 1 to 3 oz swimbaits. What kind of lines is suitable for that and how many lbs line should I use ?

@ChuckPippinBassFishing

4 жыл бұрын

+Dave Lam Thanks for watching. You’re going to have to use some heavy line to throw swim baits of that size. I would suggest 20 - 25 LB monofilament or fluorocarbon, or 40 - 50 LB braided line. Hope that helps

Hey chuck new to the channel. So I just got a z left hand and it’s nice but I was wondering the handle seems to have alittle play in it almost like I want to tighten the bolt on the handle maybe a 1/4 turn I haven’t but was wondering if this is how it’s supposed to be. Appreciate your opinion thanks

@ChuckPippinBassFishing

4 жыл бұрын

+gordongransden Thanks for watching. Hmm... I love the Z’s. If there’s any play in the handle, then something’s definitely not right. You’re probably correct. You may just need to remove the cap and tighten the nit down. If that doesn’t work, you should contact 13. 👊🏻

What do you do if u can't close the spool, so you can put line on ur reel.

I am right handed which reel size is good for a new fisherman in the concept z 13 , like to fish from shore , occasionaly a boat for bass or walleye , crappie thank you

@ChuckPippinBassFishing

4 жыл бұрын

MARK MORAWSKI as far a baitcasters go, you’ll just want the standard size reel. You don’t need the big one unless you’re deep cranking or fishing for musky, etc.

You talked about setting the brake system, but I didn't really see what you turn or selected to set the brake. Can you show it again?

@ChuckPippinBassFishing

3 жыл бұрын

There’s a little white pin, that’s usually set on “zero”, when you buy a new 13 Fishing baitcaster. You can slide that around the dial to adjust the brake. Set it to about 5 for a brand new reel. Hope that help.

how do you adjust the centrifugal dial from 1 up to another number. I watched your video, but couldn't see how you adjusted the dial

@ChuckPippinBassFishing

3 жыл бұрын

Use your fingertip to move the little white indicator that is on the 1 to whatever setting you want. Not sure if that helps.

Does this reel use weights or friction for braking?

If you’re using lighter weight lures or weightless plastics do you want your tension knob looser or tighter?

@ChuckPippinBassFishing

3 жыл бұрын

Sorry for the delay in replying. I would tighten it down, then loosen as needed until you get it where you like it.

Chuck, I just bought a new Concept c2 and took it fishing yesterday. I set it on 2 and adjusted the tension knob and it was casting pretty good but it makes noise during the cast. I just watched this video so I can try your suggestions you recommend in this video but I've never had a reel make noise during the cast. Any suggestions would be appreciated.

@ChuckPippinBassFishing

2 жыл бұрын

What kind of noise was it making? Is it a grinding noise, or something else?

@roberthanson7528

2 жыл бұрын

@@ChuckPippinBassFishing After watching your video I put a light lube on bearing and rails and it seemed a bit better and also also adusting the cast control knob lighter helps. This was my second fishing trip. I'll let you know if it continues. thanks for the reply. Bob

People can not see or I cannot see how to move the dial, your hand is covered the dial when you do that, can you make a new one and show how to dial to different number?

@ChuckPippinBassFishing

5 жыл бұрын

Sorry for the delay in responding. Here's my latest video. There's a segment in it where I show you exactly how to change the settings on your reel: kzread.info/dash/bejne/gmllqNSOiNernNI.html

I have a brand new reel ”concept a3” and after opening the side and adjusting it to ”5” i cant close it. The lever just wont switched to closed

@ChuckPippinBassFishing

5 ай бұрын

Try loosening the tension spool tension knob. If it has been tightened, it will slightly push the spool towards the side of the reel that you’re trying to close. Hope that helps

i have the 13 Fishing Origin A what number dial would be ok for frog fishing

@ChuckPippinBassFishing

3 жыл бұрын

Oh man, that all depends on a lot of different things. Rod action & length, line weight, wind.

@2k2modesto

3 жыл бұрын

@@ChuckPippinBassFishing ok thanks I am using a 7" 3 heavy rod with 50lb braid

I have the TXZ. It doesn’t cast far. I notice when I turn the breaking up i feel a difference in the reel. It spoil feels tighter when I reel. My Concept Tx cast a country mile but the TXZ is not cutting it. Any ideas?

@ChuckPippinBassFishing

3 жыл бұрын

Hmm... Probably have, but did you try loosening the tension knob?

@oso77373

3 жыл бұрын

Chuck Pippin yeah. I reached out to 13 fishing. I am going to send it back to have them take a look at it. They think a bearing could be defective.

I’ve had my concept z since Christmas so for a good 4 months and I’m fishing with a senko just set the hook on a bass today and feels like When I was reeling it in like it took forever what should I do ? Thanks

@ChuckPippinBassFishing

5 жыл бұрын

+Zachary Joyner the rate/speed the line is retrieved has only to do with the reel’s gear ratio. The only thing that would slow it down would be if your drag is set too loose?

@zacharyjoyner7010

5 жыл бұрын

Chuck Pippin ok thanks buddy I appreciate it

how do you line the crap reel so far when i tie the line on the spool the spool does not move??

@ChuckPippinBassFishing

3 жыл бұрын

I’m not understanding your question. What type of line are you using? Braid, mono, or Fluoro?

I have a concept c and I been trying to turn the dial is your kinda hard or is it easy to turn I can’t get mine to turn

@ChuckPippinBassFishing

4 жыл бұрын

You just gotta get your fingernail under that little pin and push it outward. Not sure if that helps.

@angelmontemayor9824

4 жыл бұрын

I was able to do it I had it on 5 I put it on 3 way better cast thanks for the tips

Hey Chuck I see in your videos looks like your almost always using what looks to be either flouro or mono do you limit your braid use to flipping heavy cover and frog fishing?

@ChuckPippinBassFishing

6 жыл бұрын

Scrimmy All of my spinning rods have braid. Sometimes, if needed, I’ll use a fluorocarbon or mono leader. As fare as my baitcasters go, I only use braid when I need to. It’s just a personal preference.

@scrimmy8857

6 жыл бұрын

on your baitcasters are u throwing mostly flouro and mono for top waters? Also what brand and size would your recommend for flouro and mono?

@scrimmy8857

6 жыл бұрын

I just feeling like i would get more bites on floro but not sure on what size would work well for kissimmee for like senkos chatterbaits traps speed worms stuff like that?

@ChuckPippinBassFishing

6 жыл бұрын

Scrimmy 15# test is usually a good all around weight line for the Kissimmee Chain. Those fish out there don’t care whether it’s mono or fluoro

I have the fate black origin combo from 13 fishing and it has been a nightmare for me. this is my first baitcaster combo, and I continue to get backlash. I just had to take almost all of the line out to correct it. I followed your tutorial but still having issues. I set the dial to 4 and 5 and I can barely cast it out 15 feet. I fish on the shore so I cant get the bait out far enough into the water. If I lower the dial to 1-3 I will almost certainly get backlash. I have my tension knob set just like you explained as well. I really have no idea what I am doing wrong. I want to use a baitcaster but I will probably have to switch back to a spinning real. any ideas?

@ChuckPippinBassFishing

5 жыл бұрын

+Bored00m it may not be the reel and/or its settings. It may be your casting technique. Have you checked out my ‘how to cast a bait caster’ video?

@Bored00m

5 жыл бұрын

@@ChuckPippinBassFishing watching it now, chuck. I have watched a couple other tutorials and they haven't really helped me. I will reply back after your video is done. thanks

@Bored00m

5 жыл бұрын

Chuck Pippin I definitely picked up a few tips from your video. I will try casting across my body and aiming for the clouds. The last tutorial I watched the guy was recommending I cast out side arm. I feel like no matter how much I tried I would basically just spike the bait into the ground at about 10 to 15 feet. thanks again for the help!

Great recommendation, went to 5 and world of difference….

Just got a concept z and it stops spinning (ceases) after winding once in awhile. Is this normal during break-in?

@ChuckPippinBassFishing

3 жыл бұрын

No. That should not be happening. Sometimes it could be because you have too much line on the spool and it’s bunching up if it’s not wound tight enough.

So how would you compare the polymer bearings to standard bearings Chuck? I’ve looked at the concepts but haven’t pulled the trigger yet ($200 is a lot of money to me lol) P.S. could you do something drop shotting....I suck at it lol

@ChuckPippinBassFishing

6 жыл бұрын

Kevin Watts So far, they’re quieter and smoother. And, I can get a few more yards out of a cast. As far as longevity goes, I’ll have to let you know.

@kmfw1160

6 жыл бұрын

Chuck Pippin look forward to it!

Have you got any drag issues with yours? I bought one and the damn drag is almost nonexistent. I have to tighten the drag start almost all the way down and still drags a lot.

@justinbailey6079

4 жыл бұрын

are you using braid?

My new real cover will not close. The switch just will not adjust/click over to closed. I have the black reel in your video. I have tried everything I can see possible that could be in the way. Any suggestions? Thanks

@ChuckPippinBassFishing

3 жыл бұрын

Tony Webb try loosening the spool tension knob on the opposite side of the reel. If that knob is tight, it pushes the spool out and makes it difficult to reseat the side plate.

@tonywebb311

3 жыл бұрын

@@ChuckPippinBassFishing OH WOW! IT worked. I was so frustrated with this high dollar reel. Thanks SOOO Much for your help.

@ChuckPippinBassFishing

3 жыл бұрын

Great! Glad I was able to help.

@kevinvergon1508

Жыл бұрын

Just read ya tip on closing the cover ! Great it closed ! Thks man Kevin . . .

I have concept z cant figure out to change it from 3 to 5

@ChuckPippinBassFishing

6 жыл бұрын

Gamer Gang the “pin” that marks the setting number it’s on (5, 4, 3, 2) is what you use to adjust it. Grab it with your fingernail, slightly push it out, and slide it around to the number, or setting, you want it on.

@ChuckPippinBassFishing

5 жыл бұрын

Here's my latest video. There's a segment in it where I show you exactly how to change the settings on your reel: kzread.info/dash/bejne/gmllqNSOiNernNI.html

It didn’t show how to adjust the dial itself. I still have no idea how to adjust the centrifugal dial

@ChuckPippinBassFishing

Жыл бұрын

Just saw your message. There’s a little pin. When you get a new 13 reel, it’s usually set at zero. You have to use your fingernail to help rotate around to whatever number you want it set on. Hope that helps

I have a concept boss what do you think about that reel

@ChuckPippinBassFishing

3 жыл бұрын

I don’t have one as of right now, but I’ve used them. They’re 🔥🔥

@quailiandotson5524

3 жыл бұрын

@@ChuckPippinBassFishing I agree 13 fishing gets a lot of hate because it’s minimal in a way but very productive I get great casts and almost no backlashing with this reel

on the money! I just picked up a 13 origin a, all the info is the same.

@ChuckPippinBassFishing

5 жыл бұрын

+luc917 sweet! Glad it was helpful

I’m dumb as hell I’ve had the reel for two years and struggled to cast far without backlashing just to now find out the braking was on the inside the entire time

@ChuckPippinBassFishing

4 жыл бұрын

Lol. Well, I’m glad I could help.

I can’t get the dang cover locked lol

@ChuckPippinBassFishing

3 жыл бұрын

Loosen the tension knob. If it’s tight, it’ll push the spool out and makes it difficult to lock in

You don't show how to change the center fugal brake

@ChuckPippinBassFishing

5 жыл бұрын

Sorry for the delay in responding. Here's my latest video. There's a segment in it where I show you exactly how to change the settings on your reel: kzread.info/dash/bejne/gmllqNSOiNernNI.html

Thx if it wasn’t for you I would be mad all day

@ChuckPippinBassFishing

3 жыл бұрын

Lol. Glad I could help!

Jesus loves you

my shit wont ckose back

@ChuckPippinBassFishing

Жыл бұрын

Try loosening the spool tension knob.

@ChuckPippinBassFishing

Жыл бұрын

Here you go… kzread.infowfoyRxA-so0?feature=share

Not good vid and at 1:05 ... at zero and you move to Five, but you DO NOT show how to move it ! Can't see though your fingers !

13 fishing rods suck

@ChuckPippinBassFishing

3 жыл бұрын

Wow! How old are you, 12?

How do I know when it’s on 5