How to Add More Oil Pressure to a Stock Oil pump | D16Y8 Turbo build | Part 4

Автокөліктер мен көлік құралдары

The procedure is pretty simple! The materials I used were
-Dremel & bits
- 320 grit sand paper
-Drill (optional)
-spare 2mm washers
This method has been proven to work, I’m not the first person to do this many people have done this trick before. It’s just a lot cheaper then buying a race oil pump.
www.google.ca/aclk?sa=L&ai=DC...

Пікірлер: 5

  • @GTRliffe
    @GTRliffe11 ай бұрын

    shimming doesn’t help oil pumps that bleed into the gears. you will cavitate

  • @abeast9811
    @abeast98112 жыл бұрын

    Love the vids

  • @smallenginekid6252

    @smallenginekid6252

    2 жыл бұрын

    Thanks !

  • @dougqick
    @dougqick4 ай бұрын

    i added one washer to my oil pump and it ended with spun bearings from loss of oil pressure and everything was still tight on pump never again will i shim the oil pump

  • @smallenginekid6252

    @smallenginekid6252

    4 ай бұрын

    You didn’t clean it properly or then. I ran this never had an issue.

Келесі