How to add a tooth to Retainer by Szara Dental lab
Ғылым және технология
#retainer #teeth #orthodontics
I attempted to make this video over 5 different times. Each time I figured out a better way to secure teeth to invisible retainers and had to completely start over. I used to paint the teeth into retainer and it works but has it's own issues. I used to thermoform teeth but they always eventually fall out. Not to mention move ever so slight when pressing.
I've have been using this exact technique for the last 3 years and have had great success. You can find some of the supplies needed in my Amazon shop. Click link below:
www.amazon.com/shop/szaradent...
disclaimer a small portion of your overall Amazon sale will go Szara Dental. Thank you for supporting the channel.
To learn more about the Christian Brenes FREE tooth library click on this link: • Installing Tooth Libra...
Пікірлер: 43
Voted most helpful video of 2023🎉
@SzaraDentalLab
Жыл бұрын
Thank you Perry. Best comment all year!
Right when you started I thought about the 3d manipulation to add a tooth, and you went right to it. But the cutting of a channel in the printed model for Mechanical retention like when setting a tooth for a flex partial was a boss move. Super super clever.
@SzaraDentalLab
Жыл бұрын
The groove cutting makes a huge difference. Thank you for watching and commenting
Great idea, thanks for sharing.
@SzaraDentalLab
Жыл бұрын
So welcome Duncan. Thanks for taking the time to actually tell me
Love it😊
I like it!
@SzaraDentalLab
Жыл бұрын
Thanks Austin
I like how you add the tooth using the tooth library. I noticed you didn't address occlusion. I would recommend Highlighting the opposing arch and turning on the magnet tool in the image viewer. Select your newly placed tooth and using the magnet tool, you can get it to perfectly adapt to the opposing dentition.Turn off the magnet tool and use The robust smooth tool to give yourself a bit of space between the new tooth and the opposer.You'll find that no adjustment is needed when the retainer is delivered.
@SzaraDentalLab
Жыл бұрын
Thank you Chris for sharing. This makes a lot of sense. Will try on next one
Genius!!!!
@SzaraDentalLab
Жыл бұрын
well i wouldn't go that far. lol
are we able to use mesh mixer to check the bite after we create the tooth? or how can we do that? Great tutorial, love it.
@SzaraDentalLab
Жыл бұрын
I'm not sure about using meshmixer for checking articulation. 🤔 I know there are other programs that you can do this. Typically if possible (have a lower model) I hand adjust any interference etc
Hi! Thank you for the informative video. You mentioned two layers of Celoform as insulation (4:19 minutes in to the video) Looks interesting. What is that and how do you apply it?
@SzaraDentalLab
2 ай бұрын
It's called siliform seperator. It's a liquid seperator that you apply with a brush. Let dry and then add another coat. Otherwise the acrylic tooth will stick to the model. Thanks for 👀 watching
Can you use composite or 3d resin? Or does the jet adhere to the Essex material or is the magic the undercut?
@SzaraDentalLab
Жыл бұрын
The magic is definitely putting in the undercut and allowing the acrylic to flow around it. I've never tried anything but acrylic. The only other way to that has worked for me in the past is using a light cure seal material like PALA. Not glue, it will always fall out
@SzaraDentalLab
Жыл бұрын
3D Resin or a composite would probably work just fine if I had to guess. Again Flowing material around and in a GOOD undercut
How do you clean off the fogginess in the essix after clearing off the excess? I tried with a blade but it still looks rough/foggy
@SzaraDentalLab
Жыл бұрын
Try adding a little mineral oil like seen in some of my other videos. (How to make a nightguard)
@cramirezdds
Жыл бұрын
The hard soft video or flat plane one?
HOW DO YOU CLEAN THE SYRINGE TO USE MORE TIMES ? HOW DO YOU REMOVE THE RESIN THAT IS LEFT
@SzaraDentalLab
Жыл бұрын
I just push it out before it completely hardens. I use each syringe multiple times
You make these fir people without seeing them in person
@SzaraDentalLab
8 ай бұрын
Yes
@yasminehey3854
6 ай бұрын
but how about the color of their tooth how do you get it as close to their theeth color im asking cuz i'm getting retainers soon and with a tooth in them but i nocticed that my dentist didnt talk about the color of the tooth at all @@SzaraDentalLab
Can you eat with these in?
@SzaraDentalLab
Ай бұрын
No. Food gets everywhere
@lemarcuswilliams6954
Ай бұрын
@@SzaraDentalLab Oh ok Thank you.
I have one and its made terribly 😢😢
@SzaraDentalLab
4 ай бұрын
Sorry to hear that Sandy
Ok great so for all this effort and expense in production, time, and materials what is the patient being charged? Insurance isn’t paying jack for these I’m sure ANd the PT will still need the 3 unit bridge… soooo what are we charging to the patient for this?
@jezzum62
Жыл бұрын
We charge $550
@AhmedWissam
Жыл бұрын
we do these for under 50$ here in iraq xddddd
@thepatternforms859
Жыл бұрын
@@jezzum62 I think 550 is fair. A single tooth flipper partial is 600. So makes sense
@thepatternforms859
Жыл бұрын
@@AhmedWissam wow that is insane! How much does a 3 unit bridge cost in Iraq?
@AhmedWissam
Жыл бұрын
@@thepatternforms859 from 300$ to 500$ for zirconia depending on the city the doctor lives in And this cost including the lab + clincal work
HOW DO YOU CLEAN THE SYRINGE TO USE MORE TIMES ? HOW DO YOU REMOVE THE RESIN THAT IS LEFT
@SzaraDentalLab
9 ай бұрын
easy i just push it through before it gets to be too hard