I am going to join VIP shortly. just one question what spray guns do you use i hear so many stories painters saying buy the cheap spray guns, then you go to paint shop and they say a cheap spray gun gives you a cheap spray job, i have no problems buying an expensive spray gun but will the paint go on any better

@HowToPaintYourCar

3 жыл бұрын

I use ATOM X. The X27 or X88 is a great gun. If you were a good painter you could manipulate any gun and even do an OK job with a cheap crappy gun. But the cheap guns don’t last and the atomization is not the best. But you don’t have to spend seven or nine hundred dollars to get a great job done. You can use a good medium grade gun that delivers high end results like the Atom X guns that I use. In fact I feel they spray just as good as the 1000$ SATA 5000 as I also have one of those. Plus with ATOM X they give you a free GunBudd Lighting System! zoolaa.com is where I get all of my products! I hope this helps you!

@Farmer2492

3 жыл бұрын

@@HowToPaintYourCar Hi fantastic will the Atom X be good for Acrylic

@HowToPaintYourCar

3 жыл бұрын

@@Farmer2492 Watch this video! kzread.info/dash/bejne/dmZs28qqYaTLd5c.html just sprayed this a few days ago. Single-stage acrylic! Spraying with the Atom X88. But like I said, the X20 or X27 are also very good spray guns. The X20 is like for the DIYer. The X27 and X88 is a higher-end spray gun.

@LuisC202

2 жыл бұрын

Is the Atim gun rebuildable? Do rhey sell rebuild kits?

Agreed. I talk about this on the blog. This was a quick overview without getting in-depth too much.

Great video man! Thanks for taking the time to do this!

Thanks!

Your content is always thorough and answers a lot of ?s I find myself stuck on lol. Keep up the grind!

@HowToPaintYourCar

3 жыл бұрын

Glad to hear it!

no problem!!

Great content and very helpful.

Thanks buddy!

Man you cover everything, I love it👍

@HowToPaintYourCar

7 жыл бұрын

Thanks bud. Did you see this one kzread.info/dash/bejne/i6ltk6ape7y5fMY.html&lc=z13cf5txym2mtlyrt04cchwrglmmvl3huhg

@type2523

6 жыл бұрын

Learn Auto Body And Paint DIY Mastery! Hallo my name is Costas I have an old vw bus and I want to repaint it with the lh5g or medium blue with enamel colour,where can I find it?

Good information... thanks!

Thanks for the video

thanks, enjoyed the valuable lesson

@HowToPaintYourCar

3 жыл бұрын

Glad you enjoyed it!

When doing a color change you should also factor in a colored sealer tinted close to the color that you decide to change to , this will aid in a uniform layer that is close to the color your changing too, leading to fewer coats of color to hide the underlying color. Primered spots take 2 to 3 more coats of color to hide because of transparency where one coat of sealer gives you an even background to spray on!

Hello Tony,watched almost all your videos and learnt quit a lot from u, I recently completed my SMART repair training course but never heard about Enamel paint system can we use this for smart repair too? Is this possible to make a separate video on Enamel paint system? Get more information many thanks

Hey, I’m painting a Sherman Tank....how much paint will I need? Oh! Nevermind.....you covered that in this video 🤙😎

@ObeyCity01

3 жыл бұрын

Bro your corny the video literally says how much paint do you need

Thanks for the info

Hi Tony.im painting my 79 chevy c10 colbolt blue firemist single urethane can I add more flake to the paint? And can or should I clear it? Thanks brother your the best instructor I've found.

Very informative.... as usual, thanks for your videos! TOM

Excellent video. do more videos like this.

My brother always did a shot of clear in his final coats. and they all looked great.

@HowToPaintYourCar

3 жыл бұрын

awesome!

Whoud love more videos from you

@HowToPaintYourCar

17 күн бұрын

Hey Man! Check out our VIP Program, all of our projects are there. It has all the step by step process and you can get a free manual auto body and paint. Visit vip.learnautobodyandpaint.com/home

Does this apply to the house of kolor system? If not can you do a video on paint mixing for a regular candy style base maybe adding an effects pac as Well. Thanks Tony!!

Nice, suscribed

@HowToPaintYourCar

5 жыл бұрын

Awesome! Don't forget to grab your free manual! learnautobodyandpaint.com/free-autobody-manual

NICE got the info i need its been a few years since i painted a car... cherry black here we come...

@HowToPaintYourCar

5 жыл бұрын

Check out VIP man and see how it can help you get cranking again! www.learnautobodyandpaint.com/vip-offer/

good stuff

All urethane and polyurethane is a 2k clear. Any 2k will do. I use PPG and DuPont. Learn more at: learnautobodyandpaint(.com) we cover all of this stuff and even give away a free 85 page auto body manual!

@soccerking8201

4 жыл бұрын

This was great, thanks, I have been researching "painting my car at home" for a while now, and I think this has helped. Have you heard people talk about - Banayce Wordless Blueprint - (just google it ) ? It is a smashing exclusive guide for discovering how to master car body work and spraying techniques minus the normal expense. Ive heard some amazing things about it and my cousin got amazing results with it.

I got a 1987 Cadillac fleet wood brougham 4 door a lot of car it has no body damage at all the clear is coming off and paints starting to turn yellow i want to paint the car which would be my best option as far as enamel or base /clear and with vehicle that big how much paint and material to complete the project i appreciate everything you do thanks.

Thanks

Painting my Evo 8, have the front bumper, hood, fenders & would like to paint and blend the doors and back quarters. Painting it the same color, want to restore it to the factory color. Where can I buy paint in general to match so I don't have to buy online and I can go back for more if need be?

TONY!!! you're a DORK!!!LOL BUT if it wasn't for you I'd be a dork not knowing how to do what I am doing!! Thanks for learn auto body and paint.com and all your help!!

Hello, sorry for bothering, is it will be enough 1pin of QX1 Nissan Pearl to paint bumper and left fender on Rogue? Thank you for the answer.

I still don't know how much to get! I have a 1988 ford ranger with and extended cab I need to paint the cab fenders doors and hood. My truck isnt that big so how much paint do i need? -_-

Hi , What about a 1995 Buick Century wagon , no color change. The car clear coat will be sanded and buffed to get rid of orange peel . I want to use Acrylic Urethane.

Great information, Ty! Btw, I hear a parrot in the background. What species?

Hi Tony, When you say 2 quarts, how many coats do you mean. Thanks a lot.

If I'm just painting the fender and touching up the quarter panel on a 2003 mustang, how much will I need? I believe last time the shop only needed a pint of paint/clear for the fender, but I'm not sure exactly.

How much base would I need to paint a 1984 cadillac coupe deville and how much clear would I need if I paint it pearl white

Hi, I painted my plastic bumper and when I spray painted the clear coat I used spray can and looked like it matched my car BUT I decided to use a spray gun after the 4 coats of spray can clear coats and used a gun two do 2 last coats but now it looks different the the rest of car Q: how can I safely remove clear coat???

I'm painting my car, I'm using Basecoat Binder. 1st color is going to be Silver Aluminum Candy Pearl's 25g mix (Binder mix with Pearl's 2nd color will be Candy Apple Red. So would 1 gallon be ok, because mixing with reducer? Thank you

Hey can someone help me, clear coat over primer has any reactions ?? and if not will it look good ?? sorry for my eng.

Bro,how many liter clear coat and base coat need to paint mitsubishi evolution 3..?

good video did you paint the plane

Not always but if you have dust in it or just want to have a PRO gloss, then yes. You'll achieve a much more quality glass-look job by cutting and buffing. We show you it all at learnautobodyandpaint(.com)

Hello Mr Tony, I was wondering, how long do I need to wait after using grease and wax remover before applying my base coat?

@HowToPaintYourCar

8 жыл бұрын

20 min or so...

Where's a good place to buy some paint to start learning?

so ifn you were going to paint a ford ranger grabber blue base coat clear coat is the way to go and like 2 quarts should be enough right?

@isaacc3307

4 жыл бұрын

How much paint did u need after all?

3 quarts of premix? Or 3 quarts + reducer i think its not the same for premix paint

i sprayed my truck but it dont have that shine im looking for material was a urethane single stage black can i put clear over it

@user-dn6qy1ou1f

5 жыл бұрын

I'm sure you've long got rid of it. But don't put a clear over a single stage. There's a high probability of a chemical reaction resulting in a very bad finish

hello I am looking to paint a 1996 Toyota Tacoma truck and how much paint do I need please help me out thank you so much I was looking to buy some duplicolor jet black paint shop quart to do it

@HowToPaintYourCar

7 жыл бұрын

Learn more here: www.learnautobodyandpaint.com I would say 3 quarts of base...

hi i paint my small car but the paint looks dull .. what did i do wrong?

How much primer?

Hmmm..... I own both a miata and a sentra and he managed to mention both. o.o

you also failed to mention the color and the possible transparency of color and paint line quality, it matters it really does !

attention to detail. I know you did not shower prior to making the video look at the back of your hair. hahahah 👍

So I'm guessing a gallon of enamel for a 2005 Toyota Corolla LE

Damn lawnmower!

What are your estimates for doing a 72 ford ranchero GT are plan is to use a synergy green acrylic urethane paint since we can't buy pure urethane paint in california.

@jacobwooten5137

2 жыл бұрын

I should also mention its metallic paint

lol... what am I a dork? :P

I am not doing my whole truck painting it but how many coats of paint should I apply. Is 4 or 5 coats good of paint. When me and my dad did it before we put more than 4 coats. I think it was at least 5 or 6 coats of paint we put.

@HowToPaintYourCar

3 жыл бұрын

Keysta, I usually do 2 coats of color, 2 coats of clear but it's all up to you.

@zanaga1901

3 жыл бұрын

@@HowToPaintYourCar I just bought more primer because I used a different paint code PS2 on my truck which is different than mine PSB I see the different shades of grey on my truck so am repainting it again but with PSB a pint. Am painting the front of my truck but not the top or very back. And also the drivers side rear door because am getting another door at the junkyard. So 3 doors painting and the front. I don't know if that will be enough but I bought a pint of PSB paint on eBay for 40 but I still need to buy more clearcoat and I have one spray can of sandable primer that is light grey primer. I already have guide the powder stuff but I think one more of paint a pint will be enough to paint all those areas.