Car Painting HACKS: No Primer Needed Over Clearcoat - Basecoat With Atom X16
Тәжірибелік нұсқаулар және стиль
We’re painting these two fenders and we’re going to show you that you don’t have to prime these parts to paint over it with another color.
We’re going to show you one fender which we sprayed base coat over and another fender which we primed it then sprayed gold base coat over.
We’re also going to be doing it a few different things on this door which I already did. Continue watching this 2-part series video. Don’t forget to Like, Share and Subscribe to my videos! Also comment below and grab your FREE 85-Page Auto Body And Paint Manual.
If you want to get a comprehensive guide on DIY auto body work and paint, check out the LearnAutoBodyAndPaint VIP Course.
Check out the video now!
Before body and paint, always make sure that your parts are clean. We are going to wet sand with 400-grit. You’ll be fine as long as it’s a wet silicone carbide sand paper.
I like to buy 8×11 sand paper sheets which I cut down to quarter sections. I fold them into a palm size so it’s perfect for wet sanding.
When you sand, don’t use your three fingers like how I show you in the video. Use your entire hand when sanding. Check out the demo!
The key is to get it flat looking. Another quick way to find out if you’re sanding over base coat clear coat is that if you see white while sanding. On the other hand, if you’re sanding over single stage, the color will be coming right off because there’s no clear coat on it. If this car is just single stage, you’ll see red coming right off at this point.
However, if we sand too much and cut through the clear coat, you’re going to see the red coming out of your hand because you’re getting into the base coat.
There’s a couple of dents but we’re not going to worry about that for now because this is not a dent repair video but mostly finishing. We can fix the dents later on and then repaint the car.
This is pretty much done with the 400-grit. That’s how quickly you can have it completed. This is ready to spray base coat over.
A lot of people ask what color they can paint over. It depends on your final color. You can pretty much put any color over a base coat, especially if you’re going darker. You won’t hurt it. If you’re shooting white over this, you need to make sure to spray a few coats to cover it. Put enough white to cover it.
In this project, we used the Atom Mini X16 Spray Gun with a 1.0mm tip size. The 1.2mm tip size is recommended for larger pieces for better material coverage. If you want to check out these awesome spray guns, head on over to Zoolaa now.
Continue watching the video to learn more to help you with your own custom projects.
It’s Tony from LearnAutoBodyAndPaint. Thanks everyone for watching and I hope you enjoyed this video.
Talk soon! Cheers!
Tony
Get your Free New A-Z Guide To DIY Auto Body And Paint Success Manual here: learnautobodyandpaint.com
Looking For Automotive Painting Tools? ⬇️⬇️⬇️ With Great Deals and Discounts
▶️ Spray Paint Gun (ATOM X Series): www.zoolaa.com/
▶️ Spray Gun Light (GUNBUDD): www.zoolaa.com/products/gunbu...
______________________________________________________________________________
Other content:
➡️Get complete auto body and paint DOMINATION and training here: vip1.learnautobodyandpaint.co...
➡️ The R.A.D.S. Paint Formula Video Training: vip1.learnautobodyandpaint.co...
▶️ Learn How To Make Money With E-Commerce: ecomdomination.tonybrichie.com/
▶️ Learn How To Flip Cars For Profits: howtobuyandsellyourcars.com/
▶️ Discover how to make money with crypto: cryptowaters.com
______________________________________________________________________________
More DIY Auto body Videos to Watch:
🚘 The Basics: Auto Body And Paint Your Car Yourself Without Spending $1,000s: • The Basics: Auto Body ...
🚘 Proven DIY BODYWORK Tricks - Easily Body Work & Paint Your Car at Home! Part 2: • Proven DIY BODYWORK Tr...
🚘How To Spray 2k Filler Primer and Apply Glaze Putty Before Single-Stage PAINT!: • How To Spray 2k Filler...
🚘How To SPRAY Raw Plastic, Aluminum, and Steel Car Parts (Single Stage BOSS BLACK):
• How To SPRAY Raw Plast...
______________________________________________________________________________
Social Media Links:
🔗 Connect on Facebook for More FREE Updates: / paradicegarage
🔗 Follow me on Twitter for more Project updates: / thetonyrichie
🔗 Instagram: / tonybrichie
______________________________________________________________________________
Special Training Videos and Guides On How To Build Your Wealth With Cryptocurrency:
🪙 Crypto For Beginners - How To Get Started: cryptowaters.com
🪙 Subscribe To My Crypto KZread Channel: / thetonyrichie
Пікірлер: 388
When I joined your VIP program, around 6-7 years ago now I think it’s been, I only knew a little bit about auto painting and body work and had no experience at all doing it. I signed up with you to learn a new hobby really, but I ended up really getting into it and got good pretty quick. Within the first 2 or 3 months after I joined I was doing small repairs and paint jobs for people on the side. Within 2 years I rented out a little shop, built a paint booth in it and started doing paint and body work full time for myself. Literally everything I know about painting and body work I learned from your website. Just wanted to say thanks man, keep up the awesome work.
@HowToFlipCars
6 жыл бұрын
Nick D thank you for the kind words my man. You rock!! Stay cool Nick and great to hear from you!! :)
@Yezir760
4 жыл бұрын
That's really cool man. Very encouraging to hear in the comment section of KZread.
Another Awesome Vid... Good to see Young people Takin over the Trades and doing Well!! God Bless You!!
When you said shake it like a Polaroid picture, that brought back a lot of good memories when I was i young boy. Thanks Tony, always enjoy your videos.
@HowToPaintYourCar
5 жыл бұрын
Lol yeah boy!!!
I am so glad you shared your knowledge. I have a Dodge Challenger rear quarter I am going to paint. Smooth finish,It’s black and I have the sublime color factory paint. So I am going to wet sand the clear two coats base then clear. Saves time
Hey, Tony, You are a good teacher! Please let your audience know when painting to do all you cutting in first like wheel wells edge, front and rear edges or door jams, etc. any hard to get areas then spray the main panels. so you don't overspray the panel. Keep up the good videos
Looks awesome! Started the metal work on my car recently.. that part im ok at.. body work however!! 😂 I have a HUGE Respect for your talent and the fact your sharing your secrets 😊 so a Huge thank you! appreciate it.. 👍👍
Great video as always Tony....Many Thanks 👍
Your the best brother always here to help us ... thnx a million times
Very straight forward and practical! A true professional who really shares. Rare indeed.
@HowToPaintYourCar
4 жыл бұрын
Thanks Nagesh!
So glad I found this vid on painting over good clean clear coat with new paint. Every other vid did not answer questions like this one. Great job, and thanks. Mike
@HowToPaintYourCar
2 жыл бұрын
Thank you bro! Keep cranking! For auto body and paint questions join me on my KZread live and facebook live every Monday 7pm Est. Become a VIP and access free auto body training learnautobodyandpaint.com
Thanks Every time I watch your videos I find myself learning something Another Great Video. Thanks Again
@HowToPaintYourCar
5 жыл бұрын
Hey Jose! have you checked out VIP yet? www.learnautobodyandpaint.com/vip-offer/
I like this vid. As a tech, I sometimes don't understand why people complicate paint repairs. This vid shows the simplicity. I like it. So many people I talk with don't seem to view clear coat as a paint, but clear coat is indeed a paint. So, roughen it up a little and paint right over it.
@HowToPaintYourCar
4 жыл бұрын
You go it! Learn more at learnautobodyandpaint.com
nice. i am two toning my harley and your advice is worth sooo much.. thank you...
I just had this exact same question. Painted a few cars, but never had to do this. Thanks Tony, you ROCK
@HowToPaintYourCar
Жыл бұрын
Thanks Man! Keep cranking! If you want a comprehensive DIY auto body work program that can help you with your own projects, check out the LearnAutoBodyAndPaint VIP Program at vip.learnautobodyandpaint.com/home
You save the week Brother! Thank you and Blessings !
@HowToPaintYourCar
3 жыл бұрын
Thank you too
Good job! I enjoyed your video. It's what I want to do with my newly painted car that I want to repaint coz I did not like the color. Now I know that I don't have to prime but just sand it with 400 grit. It will save me a lot of trouble and money!😃😄😁 Thanks so much! I'm an avid fan, Tony! Godbless...
I already knew how to paint but I’ve gotten way better watching you
Another classic awesome video.
Thanks man! Very educational vid
Thanks for the video. Lots of people told me I had to remove all the old clearcoat before I could repaint. Good to know that's not the case.
@HowToPaintYourCar
10 ай бұрын
Glad to help Man! Keep cranking! For more tips and tricks on auto body and paint and to get your free manual guide check out vip.learnautobodyandpaint.com/home
This guy is awesome for doing this!!
Realy nice my brother thanks a lot
Good tip Tony. I recently painted a car for my first time using an air compressor and HVLP spray gun and tried painting with primer and without primer over the old colour of the car (scuffed and sanded) and also could not visually tell the difference! Saves time and money to skip the initial primer but just make sure it's prepped nicely and you're good to go.
@HowToPaintYourCar
3 жыл бұрын
Cool!
Thanks again for your time and help
@HowToPaintYourCar
3 жыл бұрын
Happy to help
Thank you I’m a new guy to this but your videos helping me i appreciate your video time
@HowToPaintYourCar
4 жыл бұрын
Thanks for watching Eric! Grab your free manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual
So well spoken, very clearly explained and demonstrated, excellent camera work, very patient teaching style and the free book is fantastic. FINALLY a worthwhile KZread channel, if only all YT content was as valuable and enjoyable to watch. Cheers!
@HowToPaintYourCar
5 жыл бұрын
Thanks! You are awesome!
This is from Sweden: I'm very thankful to you because this programme I know how to paint with taken of old paint and also I learn timing is very important before going coat overcoat. I did not learn how to mix colour so I still use spray readymade and they are good, I love to learn to mix colour don't know how to start?
Thank you for the very informative video!! I just wished that I would've researched this prior and watched this first before jumping into sanding down my fender! I probably could have just hand sanded the pin striping off with the clear coat rather than flap discing it. Now I have way more prep work than I needed to do. But great video thanks!
@HowToPaintYourCar
3 жыл бұрын
Glad it was helpful, Rob! Check out VIP and see how it can help you with your car projects: www.learnautobodyandpaint.com/vip-offer/
Great tip didn’t really thought about it, I always prime.
Looks very good. Great help.
@HowToPaintYourCar
4 ай бұрын
Thanks Man! Glad you enjoyed it! Know more tips on auto body and paint and get your free manual at vip.learnautobodyandpaint.com/home
Fantastic! Thanks so much :D
@HowToPaintYourCar
5 жыл бұрын
You are welcome Aaron! Go ahead and grab your free manual! learnautobodyandpaint.com/free-autobody-manual
#1 pro auto-painter! My friend TONYYYYY!!!
@HowToPaintYourCar
6 жыл бұрын
Thanks, Nelson!
Your the only one that came through to answer my question. Thanks man!! Painting over sanded clear in tm morning
@HowToPaintYourCar
4 жыл бұрын
Good luck keep us posted man!!
You are very good bro great vedeos i learned everything in spay gun in your recent vedeo for regulator and spray gun hvlp and lvlp and pressure needed So thank you is not enouphe for you 🌹🌹
Great video, man! Well made, informative, and the audio levels were consistent throughout.
@HowToPaintYourCar
3 жыл бұрын
Much appreciated!
Just painted my hood, I have a gouge and orange peel, should I strip it off or wetsand 400 the orange peel out and re shoot my base. Just did it yesterday, thank u so much for your time !! Signed up for your course ! 🎨
Tony I think your spray bomb spitting and sputtering is from not shaking it up enough. think about how long they "sit" after being put in the can. Possibly days/weeks in the factory. On a truck for a day or 3-4-5. Then in a distrubition warehouse for f knows how long then on the self in the shop yu bought it from. Thats a long time for settling to happen. To help with knowing the gunk build up at the bottom has been suspended flick the bottom of the can with a small screwdriver. Little pocket one. Listen to the tone of the sound. Then do it again after you shake it. You will hear the difference. Then shake it for another 4-5 mins so it gets mixed into whats already suspended. When I know im going to use one I toss it in the shaker and set it for 15 mins. Spitting and sputtering is never an issue.
Very nice tutorial, enjoyed watching Tony
@HowToPaintYourCar
6 жыл бұрын
Thanks! Hey, don't forget to grab your FREE 85-Page Auto Body And Paint Manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual
@nelsonramos2218
6 жыл бұрын
SprayWayCustoms i miss you'r videos bro! You do awesome job with fiberglass and paint! 👍
Very helpful. Some things I didn’t know
@HowToPaintYourCar
2 жыл бұрын
Thanks buddy! Grab more free trainings and videos on auto body and paint at www.learnautobodyandpaint.com/
my work in the phillipines is car painting...same 2 you bro...😊😊😊
Another great video.
@HowToPaintYourCar
6 жыл бұрын
Thank you!
Thank you..very educational....
@HowToPaintYourCar
2 жыл бұрын
Thanks bro! You may get more free trainings and videos at www.learnautobodyandpaint.com/ and I have my latest The G.O.O.D van project were you can get this VIP Auto Body Course for FREE! ➡️ Sign up here vip.learnautobodyandpaint.com/optin53941330
Awesome teacher!
@HowToPaintYourCar
2 жыл бұрын
Thanks Man!! Get more free trainings and videos on auto body and paint at learnautobodyandpaint.com
Nice job Tony
Awesome video dude. U rock !
@HowToPaintYourCar
10 ай бұрын
Hey, thanks man! Check out more tips and tricks on auto body and paint and more of our projects in our VIP Program at vip.learnautobodyandpaint.com/home
I watch other channels on painting and such. I gotta say I could watch your videos all night. Hope to see a live one soon.
@HowToPaintYourCar
6 жыл бұрын
I will get back to live soon! Do you have your FREE manual yet? learnautobodyandpaint.com/free-autobody-manual
Looks great Tony
@HowToPaintYourCar
4 жыл бұрын
Thanks for your usual support Jon!
I forgot i was watching a spray video. Great tracks man!
@HowToPaintYourCar
5 жыл бұрын
AWesome! don't forget to grab your free manual if you still haven't learnautobodyandpaint.com/free-autobody-manual
I had no idea there was a primer filler coat. I went base coat, clear coat and amazingly it turned out ok. I can see how much smoother this is though
Great explanation. What about fiberglass that is already painted black with clear codes can I do the same process and paint a titanium grey Maybe
Well done!
@HowToPaintYourCar
3 жыл бұрын
thanks for watching! Don't forget to download your free manual: learnautobodyandpaint.com/free-autobody-manual
Great video and thanks for sharing. I painted two boat out drives which came out spotless until I sprayed the COLORRITE clearcoat which came out as yellow dust like pollen on a clean car. Wet sending the clear coat and applying the same paint should work? And than reapply clear coat. Also how long do you wait from coat to coat?
Great Work!
@HowToPaintYourCar
2 жыл бұрын
Thanks Man! Grab more tips and free trainings at learnautobodyandpaint.com
They say hold the can about 12 inches back or you'll get runs , and this man held the can up close to where he wanted to and no runs nothing but straight smooth. Man you're a bad man in a good way , i quess when a person practice whatever they might do , they became pros at what they do. You're a cold man , you know every step of that work and makes it look easy.
@johnf6267
Жыл бұрын
4-5 inches.
Doing this to my engine bay as I paint it so I can get all the hard to reach places for the last coat
Yes you are the MAN
@HowToPaintYourCar
6 жыл бұрын
Thanks! Grab your free manual! learnautobodyandpaint.com/free-autobody-manual
Now I have that dang song in my head:)
Good channel man! I just found it. How much paint do you think you need to paint two sedan doors? Do you think one pint would be enough to get two or three coats on both of the doors? Thanks
Always good Job 👍✌️💘
@HowToPaintYourCar
3 жыл бұрын
Thank you! Cheers!
Good job my man
@HowToPaintYourCar
6 жыл бұрын
Thanks, Gregory! Hey don't forget to grab your FREE 85-Page Auto Body And Paint Manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual
good spray technique, If a guy has good disciplined spray habits, generally hes got good advice, :)
OK thank you so much! I've been thinking to myself when watching people do touch up videos, that the paint is overlapping some onto the old paint and sticking, and then I saw someone else do a scuff up with 1500 grit paper to half a hood as a blend in from the other half that he primed, and I'm going, "ok that's sticking..." I want to freshen up the paint on my dodge ram '01 with the same paint, so I don't want to ruin the color I already have with gray primer. I was going to try doing a scuff up with 400 grit and giving it a go with the dupicolor color match paint in the can and now after watching this, I'm totally going to do it! (then add clear over that).
@HowToPaintYourCar
3 жыл бұрын
Go for it! Good luck!
Nice Video, can you use rubbing alcohol to prep your panel before spraying?
You make it look easy
@HowToPaintYourCar
4 жыл бұрын
Thanks! It's my passion!
Thanks, you answered my question of can i paint over my red door with yellow. I'll rub it down and give it a couple of coats of paint then clearcoat. I'm not looking for a Rolls Royce result, just a yellow door to match the rest of the car. The red door i've got is perfect in every way, apart from not being yellow enough... I might even go mad and sort out the roof which lost half of it's clear coat when i pressure washed one saturday morning.
more great knowledge always is
@HowToPaintYourCar
6 жыл бұрын
Thanks! Are you VIP?! Join us now: www.learnautobodyandpaint.com/vip-offer/
been wanting to ask you , what kind of mask do u use for sanding a full car ? and what kind of respirator do u use for painting ?
Hi Tony,Great video. I'm planning to paint my Chevy Silverado headlights bezels .they are made of plastic, chrome finish.im going to paint them same color as my truck (siren red tintcoat) already have the match color from gm,comes on spray can .my question is can i spray lacquer paint over 2k epoxy primer.thanks.
Awesome
This was helpful
@HowToPaintYourCar
3 жыл бұрын
thanks for watching!
Great video.good job... painting over paint is paint stacking and in the sun you will look down the side of the car and it will look wavy and look like it was painted in Tijuana...it's a no no... unless of course you paint cars in Tijuana that is
Thank you. This was a great lesson!
@HowToPaintYourCar
6 жыл бұрын
Thanks, Semper Fi!
You can do this to the hole car and in dents just sand down to metal and put bondo? and sand then primer and sand and sealer after ?
Hi there, nicely done!! Why when I tried to do paint over clear coat wet sanded with 800 grit, the clear started to shrink and peeled off? :( Thank you
Things to consider before spraying over sanded clear without priming is how easy the color you're going to be spraying will cover. You wouldn't wanna spray a red fender with a white base coat obviously itll take more passes to hideout the color which will result in using more paint. Another thing to consider is the thickness of mils of paint on the surface if it has reached or borderlined the recommended mil thickness and you paint over it then the paint is subject to crack fade etc. and wont last very long
@gruponemesis
Жыл бұрын
interesting
I know we all have our bad habits but one I refuse to pick up is sanding with my hand. Maybe If if i was just doing quick flip or collision type work I would in some circumstances.
Nice video. I had a question. At 12:20, you used a 2K primer on the fenders. Why use the primer after the basecoat?
Hi Tony it's comforting to Know that I'd get a good finish , but how about in terms of strength? Will it Hold ? Will the base hold on the clear to last ?
How about a all out color change inside and out, down to the bare metal taking out dents by hand with the absolute minimum of any bondo and wrap it all up with a true show shine finish? I'm doing a 100% frame off restoration on a crew cab dually so I definitely have my work cut out for me. I know very little about body work but I don't believe in bondo or fiber glass repairs.
What kind of primer do I need for using acrylic enamel single stage paint? And do I need to primer the whole car or just parts where I fixed dings etc? Car is gonna be a darker version grey of what it originally was
I used SprayMax Epoxy Primer. I noticed that once the can was half empty that it effect the performance of the can.
@sportscarclinic
3 жыл бұрын
Put it in a pan of hot water to raise the pressure in the can.
Quick question boss so I I’m done paint 🎨 got the clear coat on . Which grit can I use that will remove imperfections from the clear coat ?? 2000 3000 ? Again I don’t want it to remove the clear coat just want to remove some over spray thanks boss!!
Bro show me how to mix the primer correctly for spraying thanks bro
Tony - I read your book, incredible detailed information. And watched this video as well, my focused was the red side obviously. I have not ever worked on a car, but am inspired by you with the vast education you provide to all of us. I have a black car with relatively good condition except for some hail damaged on the hood and trunk as well. I decided to fixed the small dents with bon-do, prime it, etc. and paint the whole car over sanded clear. Since the car paint is still in good condition, how many coats of paint would you recommend? The clear is going to be 2-3 coats for sure. Thank you Tony!
@HowToPaintYourCar
3 жыл бұрын
Thank you. If your spraying base clear... I like to say spray enough until it covers which is normally 2-3 coats. Also 2-3 coats of clear. If spraying single stage, 2-3 coats med-wet. Good luck! 👍🏻
@polozeli9584
3 жыл бұрын
@@HowToPaintYourCar Much appreciated Boss
Great video answered some questions I had. I’m in the process of re clearing a peeling vehicle I been wet sanding the old clear coat and feathering it down to the base coat with 600 grit and itlooks like I will need to hit it with a sandable primer to get a even surface correct? Do I only prime around the feathered sanded areas? And do what u did sand off the rest of the panels clear coat with 400 or 600 and start blasting it with the base coat. Or prime the whole panel ,sand flat then base coat it
@HowToPaintYourCar
4 ай бұрын
Hey Man! Check out our website for more blogs on wet sanding www.learnautobodyandpaint.com/?s=wet+sanding
What about if you have deep scratched clear coat or if it was roughly sanded and you wanted to fix it and make it blend with the rest of the paint, would it be applicable to respray just clear? or would you have to repaint that area again
Question: Does the same apply for plaster (pyroxylin)? Can I apply to sanded clear coat without applying primer?
I really love your videos! From Philippines.
Should you use a sealer over the old paint under certain circumstances?
Great video been watching a lot of videos past couple weeks so glad I found this one. I have a question I can't seem to be able to find an answer to anywhere. I just painted the rear fender of my Harley-Davidson Fatboy using aerosol cans I ordered online with the OEM paint code. I did not get enough paint I thought two cans would be enough and for someone more experienced it probably would have been this is my first attempt at any kind of body work or paint. But my question is since I'm going to be waiting almost a week for my new paint to arrive can I just spray right over what I already put down or should I scuff it up first using 400 or 600 and if so should I do it wet or dry it may be important to know that my paint has metallic in it. It's Harley's Pacific Blue Pearl. Thanks!
@HowToPaintYourCar
6 ай бұрын
Hey Man! Check out LABAP VIP Program and Learn How To Auto Body & Paint Like a Pro and Download Your FREE 85 Page Auto Body and Paint Manual at vip.learnautobodyandpaint.com/home
What if you have a spot that is scraped to bare metal in the middle of a panel. its about 4 x 4 inches. metallic paint. could i just feather out the paint in a 6 x 6 area and prime paint and clear just that area?
Hey Tony,! How do you set up your garage to be able to breathe in there!? I just have single double door to open! I see you have your door open 1/4 way! Besides a fan how do you keep the bugs and crap in the air off the fresh paint? Do you use special breathing apparatus to breath fresh air if there is such a thing!? Can you give us a list of things a person needs to garage paint a car? Necessary stuff only!! Rich
Very good video, can you share with us were you buy the paint and do they color match it for you Thanks.
@HowToPaintYourCar
2 жыл бұрын
Hey Man! I am in Oahu Hawaii and I buy from Napa Auto Parts they have all the PPG paints that you need, they also have the enamel products and they also custom color and color match for you. Get more info and free trainings at learnautobodyandpaint.com
So the trick is to lightly sand the previous clear coat to spray paint (primer, base and clear coat) over it? Can you blend a panel to repair a section of the panel without having to sand the previous clear coat? I see a lot of blending videos where the base coat is blended to surrounded areas of the panel without sanding the clear coat. Wouldn't the new clear coat seal the new base coat even if the previous clear coat wasn't sanded?
What's the purpose of even sanding at all? Can't you spray over without wet sanding? Thank you so much!
Is it possible to paint a car with a 33 gallon compressor?, i got 4 guns 1 -1.3 transtar lvlp 2- purple harbor freight 1.4 And 1 1.8 for primer Also whats the recomend pressure to paint with those guns thanks!
Quick tip for the sandpaper instead of folding it, just put duct tape on the back of it then you don’t have to fold it over and it’ll help even out where your fingers are when you’re standing. Also in my opinion I think the Eastwood 2K clear in a spray can is better than the spray max. Long story short I had issues with spray max but none with Eastwood. Just my opinion anyway thanks for the video.
@HowToPaintYourCar
3 жыл бұрын
thanks for the tip!
Just what i needed to hear! Can you spray over existing base coat instead of clear? Have a car I'm about to spray , body is tip top just the wrong colour...
@HowToPaintYourCar
2 жыл бұрын
Check out our VIP program how it’s helped many people like you and get the ability to complete amazing DIY paint jobs from home on budget. www.learnautobodyandpaint.com/ and make sure you get on our email and KZread notifications and for your questions join my streaming pretty much mostly every Monday 7 PM EST
Are there going to be any sand scratches from the wet sand showing since we are not priming the fender?
What about putting single-stage urethane on the base coat-clear coat? Love the videos, you are an artist.
@HowToPaintYourCar
5 жыл бұрын
Thanks, Bronco!
@BroncoSolid
5 жыл бұрын
You bet! I think I answered my question, though, that I in fact CAN paint over the clear coat with single-stage.