Really enjoy your videos. You are one HARD worker. I get tired just watching you build. Take care, lots of love from Montreal.

I have this same van only mine is a 2001 and already has a fiberglass high top. I have been looking for a video to show how it would look with some windows covered on the kitchen side. I love what you did here. I love the table/bed insert! I especially love the plexi ceiling! You did a great job. I'm so excited get a visual of the same van I have. It really encourages me to get going on my build! Thanks for sharing.

Ready for part 2!

I raised the roof on my Chevy Express van recently. I documented it on my KZread channel and gave you a mention in my latest video. I really liked the way you framed your roof and wish I would have did it the same way. Thanks for the inspiration!

10:00 sweet catch

Glad to see your still trucking... I sold off most of my land in Texas.... have one 7.5 in van horn and 40 in hudspeth with limestone hills. I am going to bore through I have a neighbor in holbrook az if you need to camp.. I have a neighbor who has flying sourcers and martian manikins friendly...

FYI you can save a decent amount of money if ou buy Ustleum paint in Gallons and Spray it with a HVLP Turbine Paint Sprayer most of those Spray Rigs work similiar i myself have a older CampbellHausfeild they do not any longer sell a a Complete setup although i can purchase the parts from them and make my own kit ,mine is 25 years old and i like it because my Spray Gun and SiphonCup are all Metal(Aluminum ) Construction and i like that to scrub it clean with SteelWool and Brass Brushes between uses i like it Spotless and dShiny ! I’ve also Polishedit to make it easier to Clean on your End Grains i prefer to use a Petrating Marine Epoxy generally West System or TotalBoat brand

When will you upload part 2? I can't wait

You got married, congrats! The van looks great - you should be proud

Mr very fast movin busy beaver from the future ! Speedo, makin ur van into a house much bigger , and heavier than before!! Less versatile. But better livin.

Im just about to raise the roof on my 1996 club wagon It was helpful to see various other builds I have some building experience so watching you and others boosts my confidence to do my own. Would any one know if I could use fiberglass window screen as a base for the resin instead of fiberglass sheets Im committed to repurposing materials as much as I can

This may seem silly Now because it's been 3 years but if you still have the van you can cover it all with flex roof sealer paint seen some one use it on a big RV Roof

Pretty cool

Good job though. If you happen to buying a second one, I'd give you all the advice on the metal fabrication/welding. 👌 It would definitely take a lot of welding, but then you would know it's 100% sealed. There shouldn't be any issues with the welds breaking with steel, might also be lighter than the wood if you choose the right material dimensions and thicknesses.

@Stevef2234

2 жыл бұрын

Im building one too. Can you give me some help on welding?

@Agustin-jo8mv

2 жыл бұрын

@@Stevef2234 What advice specifically? I would use steel sheet metal probably 14 guage and get a harbor freight titanium 125amp Flux welder. There is a lot to that project though really. You would need to make a template, and then probably use cardboard or some other easy to cut material to make the mockup. Then get the desired material and weld it, then reinforce everything.

very nice

Any idea how much that roof weighs vs a pre made fiberglass high top?

just a question....wouldnt metal have been lighter and cheaper???? Oh as framing i mean.

Can you list the items you used? As in materials wood etc?

wait did he say that he replaced his wife with some clamps? is he still married after that comment?

When are you dropping part 2 ?

Awesome build Eli, hey man I would strongly recommend buying a Chinese diesel heater as they are amazingly efficient. If you make an install video of one it's fairly easy and will probably get alot of views due to people's interest in them. Just my two cents, looking forward to future videos.

@kristianguillermo2795

2 жыл бұрын

sorry to be offtopic but does anyone know a tool to get back into an Instagram account..? I somehow lost my account password. I appreciate any tricks you can offer me!

@duncanbeckham3453

2 жыл бұрын

@Kristian Guillermo instablaster =)

@kristianguillermo2795

2 жыл бұрын

@Duncan Beckham i really appreciate your reply. I found the site through google and I'm trying it out now. Looks like it's gonna take a while so I will get back to you later with my results.

@kristianguillermo2795

2 жыл бұрын

@Duncan Beckham it did the trick and I finally got access to my account again. I am so happy:D Thanks so much you really help me out !

@duncanbeckham3453

2 жыл бұрын

@Kristian Guillermo happy to help =)

Nice

Looks good. That roof paint aint gonna last though. You need to use fiberglass mesh and epoxy

Wondering if covering the outside with fiberglass sheets would’ve been better

I just got this exact van. you still using yours?

So doing something like this is completely legal? I also live in Colorado

Eli cool

Curious about why you went with wood, instead of steel/aluminum?

@resalemindset3037

2 жыл бұрын

It's cheaper

@nemobuscaptain3245

2 жыл бұрын

@@resalemindset3037 and ridiculously heavy

Where’s part 2

Looks pretty solid, but I would be worried about moisture coming in. 😔

@nemobuscaptain3245

2 жыл бұрын

I guarantee that leaks leaks and leaks.

@Agustin-jo8mv

2 жыл бұрын

@@nemobuscaptain3245 I mean, maybe not if he used flex seal. Haha. Jk

If u have ford van u should cut hole over gas tank fuel pump 4 self repairs 2 save lots $$

Wow it’s been a year

I see a lot of people building these. Maybe they don't know that they sell a thing called a motorhome. Yeah it's already finished for half the cost

I did it with Woodglut.

Why didnt just build a steel skeloton instead of using wood it would far stronger if god forbid it got into roll over accident?

looks heavy.

Dude...please put on some proper foot wear when your using power tools man,1 mistake&you would've been missing a toe or 2...

Why did you slope it?