How FAST is The Traxxas Slash 4x4 “ULTIMATE BASHER BUILD”? ? // 3s and 4s SPEED TEST !!
Автокөліктер мен көлік құралдары
In this video I test the Top Speed of my Traxxas Slash 4x4 (aka) “Ultimate Basher Build” after Installing a Brand New Power System….it is currently running a Castle Creations Copperhead 10 (4s Capable) Esc and a Castle 1412 (3200kv) Sensored Brushless Motor…Top Speed Test on 3s and 4s Lipo!
#traxxas
#traxxasslash4x4
#slash4x4
#traxxasslash
Amazon Affiliate Links -
1412 Castle Sensored Brushless Motor (3200kv) -
amzn.to/3u3Qn7s
Castle Creations 1/10 Copperhead 10 Sensored Waterproof Esc -
amzn.to/3CJzDqd
Proline 2.2 Badland Mx M2 Compound Tires (Pair) -
amzn.to/34Ou2lS
Traxxas Center Diff (#6780) -
amzn.to/3N0oN3x
RPM Sidewinder 4 Esc Cage -
amzn.to/3qeToR8
Traxxas Extended Battery Strap Tie Down (#5827X)-
amzn.to/3u4TYlP
Пікірлер: 126
I could barley sleep in anticipation to see this thing rip!
What a wheelie monster holy moly! Great job on the install, was waiting all night for this video! 😂
@RCKnockout
2 жыл бұрын
Appreciate it! Yeah it’s hard to keep it on the ground lol 😂
@coolstar2398
Жыл бұрын
@@RCKnockout if you were to switch to the lcg chassis you could increase the speed before it flips
@RCKnockout
Жыл бұрын
@@coolstar2398 yeah I’ve swapped it to lcg quite a while ago
Great vid dude just ordered the same system for my slash 4x4 👌💪👌
@RCKnockout
2 жыл бұрын
Thanks man! It seems like a nice setup to go with
SO happy you did a follow up video on this. I'm definitely gonna switch to the 3200kv on 4s. That thing screams
@RCKnockout
2 жыл бұрын
No problem….it sure does!
It'd be nice to see roost and dust like an "off" road truck with off road tires meant for. Good job ! I can't wait to see the Copperhead in its true nature, slashing through the desert 🙌
@RCKnockout
2 жыл бұрын
Oh yeah …we’re definitely gonna be testing it
Good job mate😎👌🏻👌🏻
@RCKnockout
2 жыл бұрын
Thanks man!
awesome rc and great speed runs
@RCKnockout
2 жыл бұрын
Thanks bro 😎
@islandrc-duke1972
2 жыл бұрын
@@RCKnockout 😁👍
Sweet!!
41 on 3s maybe 55 on 4s. Awesome job with the build! You had to tweek it a bit but you got it in and it works great.
@RCKnockout
2 жыл бұрын
Those are some good guesses! Thanks man! It definitely wasn’t a clear cut install lol
Cool video with your slash 4x4 UBB, I recently got a 6s Slash 4x4 in a trade for my traxxas maxx v1 and converted into a 4s HW Max 10 SCT 3200KV Platinum spec machine. Even though i'm a little unsure about buying a 3rd Slash 4x4 but i still want a new ultimate since it's too expensive to build mine up compared to a new ultimate machine.
@RCKnockout
Жыл бұрын
Glad you liked it! That’s Awesome man!
@cjchannel12RC
Жыл бұрын
@@RCKnockout I sure do and it has been an awesome week for me. I first got my XO-1 running, then i got a new to me slash 4x4 HCG and mostly rebuilt it and put a new power system in my Hoss.
@RCKnockout
Жыл бұрын
@@cjchannel12RC nice job man!
Nice run
@RCKnockout
2 жыл бұрын
Thanks!
I have the hobbywing sct 10 esc and motor combo. For what ever reason the ESC is 4s capable but the motor is only 3s capable. ☹️ 4s looks like a ton of fun!
@RCKnockout
2 жыл бұрын
Yeah….as long as the esc is 4s capable…it should be able to run 4s….you just can’t expect the motor to hold up to 4s long term
I wonder if a flotek sc body would help you. Do the cutouts and let the air slip past and through.
@RCKnockout
7 ай бұрын
Not sure…I’ve never tried one….maybe
Put the GPS somewhere up front. The added weight will help to keep the front wheels on the ground. At least you'll get a couple of mph more before it invevitably parachutes and flips on its lid.
@RCKnockout
2 жыл бұрын
Good advice! There is very little weight to that gps but it might make a small difference
Hey Nolan your slash is LCOG right? Wouldn't that help with the parachuting?
@RCKnockout
2 жыл бұрын
This slash actually doesn’t have the LCG chassis….I prefer this chassis for bashing though
How do you like this setup compared to the vxl3 setup and how is it holding up
@RCKnockout
Жыл бұрын
It’s holding up well….the motor shaft broke though…..I’d recommend getting the 5mm motor shaft
How did you mount the esc? I only see the bottom part of the cage.
@RCKnockout
Жыл бұрын
Double sided foam tape
Id did the same thing but 4s with a 2400kv motor and a 26tooth pinion and 35 spur gear. A rocket
@RCKnockout
9 ай бұрын
Yeah I’m sure it’s super fast!
If you geared up a couple teeth on the pinion I'm sure you'd hit 60 no problem, you could also try putting the hoons on for speed runs just so you can see how fast it is
@RCKnockout
2 жыл бұрын
Yeah geared up a bit would help….hoons won’t mount on this unless I bought 17mm hex adapters…which I probably won’t do….since long term it’s not really for speed runs…it’s for bashing….but thanks for the recommendations
@keaginm2791
2 жыл бұрын
@@RCKnockout Oh I thought you had some for your speed slash that you could use, either way the Slash is turning out great 👍
@RCKnockout
2 жыл бұрын
@@keaginm2791 you’re right I have it on that machine….probably won’t take them off that machine though…but thanks bud
A 50mph basher, I say call it good and go have some fun. any faster will just be $$$$ for broken parts😅
@RCKnockout
2 жыл бұрын
I definitely don’t think fasters gonna necessarily help…..since I can’t get up to those speeds without going airborne lol…..if I do gear up…it’s simply to get rid of some of that low end torque….it feels almost like too much torque….the thing does wheel stands and can’t stay on the ground at like half throttle….also more likely to break parts with the launches
Do you think the copperhead 10 ESC and 2400KV motor will work with it ? Or you think the 3800KV better
@RCKnockout
Ай бұрын
2400kv is pretty low….it would work but you’d have to gear it up a lot to get decent top end speed
@FOURFTP
Ай бұрын
@@RCKnockout so the 2400KV more for like higher torque and 3800KV for higher end power ? I saw someone put a 2400KW and bigger pinion that’s why I was asking. That thing ripped
@RCKnockout
Ай бұрын
@@FOURFTP yeah essentially you’ll have way more rpm with a higher kv motor
How do you keep them 2wd motor From heating up so quick
@RCKnockout
2 жыл бұрын
I don’t quite understand the question?
How do you keep it on the ground my Traxxas slash 4x4 flys I mean literally fly's
@RCKnockout
2 жыл бұрын
It’s really hard to keep the slash on the ground once you get above 45mph…..the body basically turns into a parachute
I want to put the system in my slash any overheating problems on 3s?
@RCKnockout
Жыл бұрын
No problems with it overheating
I hit 96 with mine same setup. Stock gearing and a 4s
@RCKnockout
Жыл бұрын
Impressive
Weight the front a little amd keep the front down?
@RCKnockout
2 жыл бұрын
Maybe….I feel like it would take a lot of weight to keep the front end down though
Where did you get the battery holder?
@RCKnockout
Жыл бұрын
eBay I think….actually it might have been Amazon….I probably left a link in the description
If you go with mamba x pro on 4s should be around 90 with that gearing
@RCKnockout
2 жыл бұрын
This isn’t really gonna be a speed run machine…but thanks 😉
I think you should drive that car with 3S. That's what the Slash is made for. 👍
@RCKnockout
2 жыл бұрын
That’s true…..but it’s also fun to push past the intended limits of the machine
Gear it up i think 18 / 55 is the biggist pinion you can run in that chasis mine is also wheelie happy also on 6s
@RCKnockout
2 жыл бұрын
Is that the gearing your running on 6s?
@thomasdowneyjr.4162
2 жыл бұрын
@@RCKnockout yes I am I have 2650kv castle
@RCKnockout
2 жыл бұрын
@@thomasdowneyjr.4162 I gotcha…thanks
the limit of the slash is 3S... good video friend.
@RCKnockout
Жыл бұрын
Glad you liked it! 3s is the limit for a stock machine
What shocks are those?
@RCKnockout
2 жыл бұрын
GTR Shocks
Put a 22 t pinion and 54 spur and some steel belted or foam tires you should be just about 70ish mph
@RCKnockout
2 жыл бұрын
Belted probably won’t be great for bashing compared to unbelted tires….not as much cushioning
Bash it real good
@RCKnockout
2 жыл бұрын
That’s the plan! 😉
Hey whats up Nolan!!
@RCKnockout
2 жыл бұрын
Just working and filming videos……how about you man?
@miggyloks
2 жыл бұрын
@@RCKnockout Me just working like you and playing with my Rc cars when I can. I enjoy your Videos. Straight to the point no blah blah blah 😎
@RCKnockout
2 жыл бұрын
@@miggyloks awesome man! Glad you’re enjoying the videos!
3s pass looks like my stock slash brushless on 2s with 15 / 54 gearing
@RCKnockout
2 жыл бұрын
Maybe…..It might be going about the same on 2s
@gavinc.9785
Жыл бұрын
How does the 15/54 setup handle? I just got this same motor and esc and want a solid all rounder that doesn't raise Temps because I fried the stock brushed motor. I did get it used and it's the old old slash with on board audio. Which I need to figure out how to wire up because I love it! Any thoughts on gearing would be much appreciated!
@roderick9018
Жыл бұрын
@@gavinc.9785 I've never changed it back , gets warm but I have heat sink on motor and ESC fan
Mine is extremely fast with 3s. But I'd run a center differential
@RCKnockout
2 жыл бұрын
Yeah I got a center diff in mine too
My 2wd slash did 39 on 2s and 56 on 3s stock
@RCKnockout
2 жыл бұрын
Nice man! What gps did you use?
@charlesreedy9330
2 жыл бұрын
@@RCKnockout my phone
@RCKnockout
2 жыл бұрын
@@charlesreedy9330 you mount it on the rc?
@charlesreedy9330
2 жыл бұрын
@@RCKnockout yes, on the chassis under the body
@RCKnockout
2 жыл бұрын
@@charlesreedy9330 ok I gotcha
I wonder if led weights on the front would help
@RCKnockout
2 жыл бұрын
Maybe 🤔
55 upside down is impressive..👍
@RCKnockout
2 жыл бұрын
Oh yeah lol
Add bigger pinoin😊
@RCKnockout
Ай бұрын
I have swapped to a lot bigger pinion since this video 👍😉
Great info . Hmmm maybe 18-19T and earplugs in centre diff to stop the front tyre balloon effect . Top speed on 4s …. 63mph .
@RCKnockout
2 жыл бұрын
Thanks! I definitely don’t want do the earplugs….that’ll lock the center up too much…..maybe a thicker weight fluid?….I feel like it’s already kind of a thick fluid cause this things does wheel stands from a stop without really even trying…..
Wow even the drag motor can barely do 60mph I thought even doing a simple 3600kv motor would be able to do 60 but mama got one of the best motors and it’s not all that ofc wheelies are cool but…
@RCKnockout
Жыл бұрын
I could probably gear this rc up quite a bit and gain more top speed
@pug2451
Жыл бұрын
@@RCKnockoutyea I’d say so I’m building my slash been watching ur vids since the start of ur build and I’m still trying to figure out gearing. Seems like I’m not gonna be able to get away from my motor getting hot tho for wanting 60mph so I’m just gonna run it until my hobbywing 3700kv motor blows
@pug2451
Жыл бұрын
They said to put low pinions but it’s not fun:( rn sitting at 21/86 2wd have yet to throw a 3s in it but rn sitting at 35-40 on 2s decently hot
@RCKnockout
Жыл бұрын
@@pug2451 yeah the stock motor and esc are gonna get very hot trying to bash with the 60mph gearing installed
My ultimate stock has done 50 flat on 3s
@RCKnockout
2 жыл бұрын
Nice! What gps did you use?
@ethannunley1205
2 жыл бұрын
@@RCKnockout the red one you have
@RCKnockout
2 жыл бұрын
@@ethannunley1205 oh ok gotcha 👍
55 is about top for the gear ⚙
@RCKnockout
Жыл бұрын
Good guess!
Oh and a wheelie bar
@RCKnockout
2 жыл бұрын
That could be helpful 👍😉
Dude, i hit like 65 on a stock vxl 3s .........
@RCKnockout
5 ай бұрын
The stock motor is a higher KV which means more RPM, it also means more speed….if I were to gear this up it would go significantly faster
20t pinion bash it on 3s should be 50 mph.
@RCKnockout
2 жыл бұрын
That might be too high of gearing though? Don’t you think? It’s still gotta be able to bash
57 mph is my guess
@RCKnockout
2 жыл бұрын
That’s a solid guess!
4s 55
You should be at least 60 on 4s
@RCKnockout
2 жыл бұрын
Yeah it probably needs to be geared up at least a few teeth on the pinion
No 30
My Tekin pro4 4600 kv 4 pole motor is faster.
Slow😂😂😂