Fun to watch....tks Firstly, even a mediocre basher needs a metal motor mount, certainly an ULTIMATE one should! IF you had an aluminium motor mount, it wouldn't have bent and thus allow the binding of your pinion against your spur. ---->Traxxas 6860R (7460R for LCG), OR Hot Racing SLF38X06 (LCF38X06 for LCG). Secondly, a center diff does NOT belong on a basher at all! In fact, it's the LAST thing it needs. It takes all the fun out of it, and mostly just lifts the front-end under power and blows-up front tires to shreds! At least use the heaviest diff lube you can find to put into it if you insist on using it as a basher, as opposed to a racer, who's simply looking to not loose traction in corners on a track.

@RCKnockout

Жыл бұрын

Glad you liked it! I disagree on the center diff not belonging in a basher..it doesn’t belong in all basher’s but I find it handles better with it installed….also it helps save the drivetrain on hard landings better than a slipper clutch…to all their own though…as long as we’re having fun 👍😉

Oh wow I think the setup will turn the Slash into a beast.😎 I'm looking forward to the first test video in the field. Greetings from Germany😁

@RCKnockout

Жыл бұрын

Thanks! Yeah I think so too!

Lose the factory receiver box (unless you want it to swim. Cut your own mounting plate out of almost any stiff plastic, or some CF if you’ve got the budget. Hell, the receiver with fit on top of the servo.

@RCKnockout

11 ай бұрын

Thanks for the tip!

I'm so glad you're fixing this. Awsome!!!

@RCKnockout

Жыл бұрын

Yeah me too!

Cool video, I'm glad you got your slash fixed and sometimes when i'm shopping for esc and motors i try avoid the small shaft version if i can. I haven't been doing a lot of rc stuff recently but i have been planning to get my first full 5th scale a 30dn 5ive t clone or the new HPI Baja 5B Flux sbk.

@RCKnockout

Жыл бұрын

Yeah I probably should have gone with the bigger one to begin with…..this is the first time I’ve had a shaft break on me though

Nice i had to move my reciver box to the front and i did mod 1 gears in my truck 24 /42 right now...

@RCKnockout

Жыл бұрын

Nice bro!

You can mount the transmitter on the front of the car next to the front body posts there are already holes there so you don’t need to drill anything edit:just finished the video and you did what I thought of 😂

I have that same spectra motor in my slash 4x4

@RCKnockout

Жыл бұрын

Nice!

When you solder, are you using Flux? Flux will help you greatly when soldering, it makes the solder flow right to where you apply the heat

@RCKnockout

9 ай бұрын

Yep I always do…it still seems to wick away from the actual wire..it’s bizarre

i also use 10lb velcro from lowes for my esc it works better then double sided tape...

@RCKnockout

Жыл бұрын

Good to know thanks!

Finished system looks good though. She's going to scream with that setup.

@RCKnockout

Жыл бұрын

Thanks! It definitely should!

I have the 6s firma in my slash its a monster on 4s and straight up Evil on 6s lol

@RCKnockout

6 ай бұрын

Nice! I bet it is!

You could of just ordered a new rotor from Castle.

Are you going to put in a metal motor mount to dissipate the heat better and improve durability? Love the videos keep it up 👍

@RCKnockout

Жыл бұрын

We will see……glad you liked it!

I kinda like the spectrum combo package. Didn't you run a spectrum efc onto the 100 mph slash? I may go this rout. I want plenty of power and no heating issues. 4s power yeah baby.

@RCKnockout

Жыл бұрын

Yeah I ran a 4s Redcat system in that rc too

how's that center diff been treating you ? so done with the slipper clutches .. love your content 👍

@RCKnockout

Жыл бұрын

Glad you enjoy it! It’s been working really well for me so far!

@patty2Strk

Жыл бұрын

@@RCKnockout happy to hear it !

do you have a 3d printer? if so print a mount for the stock location that will raise the ESC up about an inch or 1.25 inches. it will get the mounting surface above the receiver box. just my .02

@RCKnockout

Жыл бұрын

No I don’t

good friend, a great video, could you tell me what wheels have you put on it and how do they work? those of origin are very bad... greetings from Spain!

@RCKnockout

Жыл бұрын

Thanks! These are stock wheels with Proline Blockade Tires Mounted up

@Cofishh

Жыл бұрын

@@RCKnockout and do you notice a lot of improvement compared to the originals?

@RCKnockout

Жыл бұрын

@@Cofishh these tires are more for racing than bashing

What are your drive shafts?

@RCKnockout

Жыл бұрын

MIP

Can u do the nitro slash mid motor conversion on ur 2wd next

@RCKnockout

Жыл бұрын

No I’m not gonna convert my 2wd slash to nitro

@endosrc

Жыл бұрын

@@RCKnockout no i meant use the nitro slash chassi to convert ur slash 2wd to mid motor. like the race trucks. look it up

@RCKnockout

Жыл бұрын

@@endosrc oh never heard of that

@endosrc

Жыл бұрын

@@RCKnockout telecomandorc was the first to do it to my knowledge

@RCKnockout

Жыл бұрын

@@endosrc I’ll have to look into it

Have you tested this setup in vidéo 🤔

@RCKnockout

6 ай бұрын

Many times….feel free to check out the playlist kzread.info/head/PLYNpdWy3CF4VSuuIywGj5pW8GLY58YF5c&si=-GeZwhV82_Z6nN3P

@zackfair7697

6 ай бұрын

@@RCKnockout thanks 🤙

Hello, Nice monster power setup 💪🏁 What is the center differantial 🤔 I wante same setup for a traxxas ford fiesta bl-2s with my électro, 4268 in 2500 kv and 100A ESC ( team magic Seth électro). Thanks for your vidéo 😊

@RCKnockout

6 ай бұрын

Glad you liked it! It’s the center diff out of the Traxxas Hoss….running stock weight fluid

@zackfair7697

6 ай бұрын

@@RCKnockout thanks for your answer 🤙

@zackfair7697

6 ай бұрын

​@@RCKnockout with center differantial hoss, pignon dimensions spécial use ?

@RCKnockout

6 ай бұрын

@@zackfair7697 you’re welcome!

@RCKnockout

6 ай бұрын

@@zackfair7697 any 32p pinion will work

Rebuild that motor with that 5mm shaft kit.

@RCKnockout

Жыл бұрын

I’ve never seen a 5mm motor shaft kit for sale

@NCMATT

Жыл бұрын

@@RCKnockout look on site 👀 I seen it today.

@NCMATT

Жыл бұрын

@@RCKnockout yeah just went and looked again 40 dallor's 1412 rebuild kit 5mm shift . You well have 2. I've got a 1415 2400kv 3.2mm shaft I like it alot on 6s would like to see 3200kv on 6s.

@RCKnockout

Жыл бұрын

@@NCMATT yeah I just looked it up

@NCMATT

Жыл бұрын

@@RCKnockout I've put my 1410 3800kv on 6s in my drag car.

Is the old one going in the stampede

@RCKnockout

Жыл бұрын

Wouldn’t be much of a surprised if I told everyone who asked lol

@stinkmod2297

Жыл бұрын

@@RCKnockout do you actually like the stampede

@RCKnockout

Жыл бұрын

@@stinkmod2297 yeah so far…..don’t really have enough testing yet

@stinkmod2297

Жыл бұрын

@@RCKnockout like the looks?

@RCKnockout

Жыл бұрын

@@stinkmod2297 with the wheels and tires I have on it now….it looks good

You could of just bought a new shaft for it

@TriedWhistle

Жыл бұрын

I think going with a thicker shaft was the right call I agree with what you said though

@RCKnockout

Жыл бұрын

Where? I’ve never seen one for sale

@tonesepulveda2728

Жыл бұрын

@@RCKnockout on the castle creation website

@RCKnockout

Жыл бұрын

@@tonesepulveda2728 interesting…..I just looked on their site….still kinda expensive for the rebuild kit….but cheaper than a new motor…..

@tonesepulveda2728

Жыл бұрын

@@RCKnockout yea true if have no use for it I’ll take it 😂 I can use it in my stock slash

Castle on off switchs inherently bad. C'mon castle

@RCKnockout

Жыл бұрын

Agreed

No thanks. That motor 1412 watever has proven time and time its too small. Gets too hot. Weak shaft. Castle seems finished. 10yrs ago every used rc on ebay came with a castle motor atleast but now people just buy cheap surpass hobby. Or hobbywing. The very best motor combo i had for slash was a direct fit 1/8 system and it breezed 55mph on grass never got hot. Leopard hobby 2700kv 4065 size with hobbywing sc8 esc the combo fits snug rx box std postion. But now that motor is really expensive was £70 imported now its £100+ and i cant find another 4065 motor.. 4068 is around 2650kv 2900kv i think 2700kv was perfect but 2900kv might be better more rpm its not a heavy rc. 3s 55mph balistic power. Ive got a new slash now somebody else built it. Ultimate start. Idk what combo it has but the cloest i can find is hobbywing xr10 i think but has huge add on heat sink fitted i cant see nothing and dont heve any tools for it yet lol. I sold up in 2020 but impulse brought a slash last week. The best RC platform around. Bcos its so versitile parts galore. Change afew parts and its a completely different rc car. But i 5mm motor shaft should be the go to. Especially when its failed you before.

@RCKnockout

9 ай бұрын

I think Hobbywing has some really good products…I’ve also had good luck in the past with Surpass hobby motors…