Honda Ruckus / Zoomer 50 - Engine Oil Change | Mitch's Scooter Stuff
Автокөліктер мен көлік құралдары
In this video I show you how to change engine oil and clean the oil strainer screen on Honda Ruckus / Zoomer 50 scooter.
Tools I used:
10w-30 engine oil - amzn.to/2pxVR9d
Ratchet 3/8 drive - amzn.to/2hhmnUs
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
17mm socket 3/8 socket - amzn.to/2EMT6LO
17mm wrench - amzn.to/2GKqFL4
Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R
Oil pan - amzn.to/2puqMmY
Old sock / rag
Funnel amzn.to/2v5mYLn
Measure cup - amzn.to/2hu6ARj
SHOP MY SCOOTER STUFF: amzn.to/2CbqQku
Want more free Scooter Tip / Tutorial videos - Please support MicBergsma!
Paypal donation: bit.ly/2fghrwN
Austin, Texas
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact:
hire.micbergsma@gmail.com
*******************************************************
KZread - 2nd channel - bit.ly/2g4i5d5
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
******************************************************
#mitchsscooterstuff #hondazoomer #hondaruckus #ruckus #50cc #scooter #howto #tutorial #oilchange
Пікірлер: 275
i rewatch this video all the time as a refresher before i change my oil
I remember watching this years ago when I first bought my ruckus. Best ruckus/scooter videos on youtube. Thanks again. If I'm ever out your way we need to rip around!
@MitchsScooterStuff
4 ай бұрын
Awesome, thank you!
Great video and great videos Mitch! Just letting everybody know out there if you have a 2019 or or newer Honda ruckus, when checking the oil level, you do Not screw the dipstick in. Simply clean the dipstick off, insert it till the threads seat, and pull it back out.
@hikerglenn
2 жыл бұрын
I was going to say that too....you’ll end up a little low overall screwing it in. All Hondas (to my knowledge) the procedure is the same, you just set the dipstick back in the fill hole on the threads, then pull out and check the level. I worked at a Honda dealership (in the service dept) for quite a few years back in Indiana.
@nerb6833
2 жыл бұрын
I do the same!
@MoJo-eb4lt
2 ай бұрын
I just sent my dipstick as well to check the oil, that is without screwing it in. Seems though that one side of the stick is lower than the other. Angle of dipstick in motor I'm sure, but still, what to believe?
Thank you Mitch, just changed my oil for the first time. It was so easy with your instructions!
@MitchsScooterStuff
5 жыл бұрын
You're welcome! Glad it helps!
@greghawkman
3 жыл бұрын
Hey Mitch great video....but the manual says not to rev up the engine to warm it up.
@Winterstick549
Жыл бұрын
@@greghawkman Just take it out for a spin
The fact you went into detail as far as amount of torque for each bolt amazes me. While I probably wont beable to use that info it's really comforting knowing that someone is helping out like you are
I got to the end and was like "Hey, it's Mitch!" I've watched your GoPro tutorials for years
@MitchsScooterStuff
2 жыл бұрын
haha that's awesome !
Thank you for an high quality information I’ve never checked out the strainer screen for last 17 years of my 2003 ruckus and I didn't even know it existed. lol I’m trying to restore my old ruckus on these days your videos are very helpful for me. All the love and respect from korea🇰🇷 thank you mitch u rox
Just wanted to stop and say your videos are straight to the point and incredibly clear and concise. Keep up the awesome work man. Just did my coolant and oil watching your vids. I'll check your channel for all other stuff I need. Thanks man.
@chopkinsize
Жыл бұрын
Couldn’t agree more!
Best Rukus Channel on the Internet for Maintenance. Especially love using proper torque & the camera work expertly showing exact placement. Thanks Mitch, you are my Go To & my personal Father & Son retirement hobby is restoring American Muscle cars then showing & reselling, Have built a couple or 3 drag cars & bikes just for fun. BTW - my 2022 Rukus heavy mods without an engine change is a 2022 cruises at 40mph normal top speed 45/46mph stage 1. The Ruck is my daily around town errand bike.
I liked the video, recently got a ruckus and looked up how to do the oil change. Captions are perfect. Thank you.
I don't have Ruckus however I just got a Nss250 Reflex. Its been sitting for 10yrs, I'm in the process of bringing it back to life. Anyway I enjoy your videos, they are very helpful!
Just bought a 2009 Ruckus with 190 miles on it. Been watching some of your videos on maintenance. Thank you for making clear and concise videos!
@MitchsScooterStuff
2 жыл бұрын
Awesome! Enjoy your Ruckus 😀👍🏼
Keep up the good work, Mitch! Great editing on the videos by the way! You've helped me to change my oil and my coolant now!!
Thank you , Mitch!! I've now changed the oil, replaced the battery, and installed a new oil pump. You are awesome
@MitchsScooterStuff
4 ай бұрын
Yeah!!
another GREAT job. I have now seen your Ruckus coolant change and oil change as I am thinking of buying a 2019 Ruckus...(although I wish Honda would offer injection vs. existing carb) . I am hoping they hire you and give you a job ...you do it that well . Again thank you and congrats . Kevin
Getting my first Zoomer, (as the Ruckus is called in the UK) , next week and your videos have been fantastic. Clear concise instructions, brilliant. Thanks very much 👍
Thank you very much, Mitch. I watched a lot of videos but you were the one that I trusted. You don't try to convince me you know what you are doing, you just show me how to do it.
@MitchsScooterStuff
2 ай бұрын
I appreciate that!
I thought you might be deaf at the start of the video. Very informative and more detailed than many other videos I've watched! God made a wonderful person with you.
I’m purchasing a new ruckus next month so finding your channel is a blessing! Thanks for the info (subbed as well 👍🏾) safe riding!
Great video, perfect level of detail and video quality!
@MitchsScooterStuff
5 жыл бұрын
Thank you Sebastiaan!
Thank ya Mitch helped me learn my new ruckus better than before. Just picked up my GN 10w30 and getting ready to do exactly what you just showed me minus the torque wrench.
@MitchsScooterStuff
Жыл бұрын
You’re welcome Josh! Also when you check the level with dipstick, just put it in and sit without screw in
I extremely appreciate your videos as i have purchased a 2018 honda ruckus and have not a clue on maint !!!
Fantastic video and thank you so much for filming it! I can now comfortably work on my ruckus and feel confident thanks to you.
Outstanding job man. Really helped rather than only relying on the owner's manual. 5/5 stars. 🌟 Thanks, Matt
@MitchsScooterStuff
Жыл бұрын
Thank you Matt! 🙌🏼🙌🏼
Thanks Mitch! When checking oil do not screw in dipstick. Have a great day!
great tutorial .I'm getting ready to change the oil on a pair of rucks I own and your video was rite to the point no b.s. and very clear and helpful thank you sir for your great vid👍
Thanks brother! Just picked up a ruckus yesterday. Now I know how to change oil.
I went into a repair shop in Vancouver to inquire about them doing oil change in my 2015 Ruckas. Their shop rate is now $180 per hour! Be looking at over 200 buckeroos for this simple oil change. After watching this video I went to the walmert and bot oil and a funnel for less $10. Thanks Mitch
@MitchsScooterStuff
2 жыл бұрын
Awesome happy to help you save $$ 😄🙌🏼
Awesome video, ill be using these ruckus ones for all my maintenance from now on!
Thanks duder! Just bought a 2015 Ruckus. Your videos are great and very helpful! Liked and subscribed. Rock on Mitch!
this is a badass video and you did a great job of showing how to do everything visually for the hearing impaired! bravo
Rad video! I dig the pace and all the detail you included. Now I’m ready for another season. Cheers!
@MitchsScooterStuff
5 жыл бұрын
Thanks Morgan! Awesome, ride safe man!
Thanks, Mitch! Going to change mine this weekend. Appreciate it!
Thanks Mitch! I just purchased a new ruckus and this video is very helpful! Thanks again. Liked and subbed.
@MitchsScooterStuff
6 жыл бұрын
Anytime! That's awesome Ruckus is a good bike! Thanks!
Dude is absolutely great gonna do alllll these steps jus got my first Ruckus 2/10/2019 Thank u for alllll your hellp
@coltonsites3802
3 жыл бұрын
Aye we got ours in the same year
Excellent tutorial! Best one I’ve seen yet! Thank you!!!!
Well done, exactly what I needed to know about my oil change, thanks! Subscribed!
Great video, very descriptive and to the book 100! Keep these amazing videos coming
Great Mitch. Love it. 1200 miles on mine and overdue!
Thanks Mitch! Can't wait to change my oil this weekend!
The best explanation I've ever seen! Thanx!
Just bought one of these. Thanks for the the tutorial. Very helpful Headed to garage now for the change
@MitchsScooterStuff
5 жыл бұрын
Awesome man! You're welcome!!
Appreciate your time making the video Mitch it was very helpful.
@MitchsScooterStuff
2 жыл бұрын
welcome!
Fantastic video. Clear and concise. How necessary is it to tighten those bolts with such accuracy?
Thanks that's awesome.......I just bought a ruckus and these are things I need to know.....thanks for the help son....word...great vid
@MitchsScooterStuff
6 жыл бұрын
You're welcome Craig! Thank you!
Clear, to the point, and clear video. Thanks.
I'm attempting to breathe new life into my old 2004 Ruckus. Thanks for the video, maybe she'll live again! =)
Thank you man for posting this video I needed an idea to do it.
Hell yeah! Thanks, Mitch. Hair looks great as always, buddy!
@MitchsScooterStuff
2 жыл бұрын
haha thanks!
Perfect and straight to the point! I am going to change my oil soon,with this as my reference
@MitchsScooterStuff
5 жыл бұрын
Right on! :)
Great Video! no nonse exactly what people need :) Thanks man!
Great stuff, quick and to the point.
Great video... simple.. all the items to do .. TY... I have to look up more videos about my Ruckus u posted
Thank you very much for the instruction! Very well made video!
Aye don’t screw in the engine-oil dipstick when checking levels. Just goin by the manual maybe it’s different for other production years mine is a 2019. However I have a comprehensive service manual for the NPS50Ruckus 2003- present that they give to Honda Technicians to do all service and assembly.. and this service manual also says not to screw in the dipstick when checking oil level, just seat the stick in the threads for a second and then remove to check.
Thanks Mitch! Love your videos dude
Your video helped a ton! Thank you Mitch!
Well done. Exactly what I needed to know. Thanks! Subbed.
Perfect easy to understand instructions. Thank you
Best video out on doing this. Thanks so much!!!
Good stuff. Thanks Mitch!
Thanks for the video! I just saved a TON by doing it myself!!
@MitchsScooterStuff
5 жыл бұрын
You're welcome!
Diggin the ruckus vids man.
Great video!! Just did my first oil change!!!thanks!
@MitchsScooterStuff
2 жыл бұрын
yeah!
Nothing but love my Brother. Thankyou
thanks Mitch, great instructions and easy to follow,,,,,, "Way to Go" !!
@MitchsScooterStuff
Жыл бұрын
Glad it was helpful!
Love your style. I did everything with the same tools you suggested but was having issues with the torque wrench, fitting it with the hose in the way. I tightened the oil screen bolt with the wrench as tight as I could. You think this will be okay?
Thanks was really helpful just got me a new honda ruckus 2022 now i know
@MitchsScooterStuff
2 жыл бұрын
Awesome!! Enjoy your new ruckus!
@pow95dap87
2 жыл бұрын
I will man
Thanks!! need to change mine today...good video!
Nice Video! Glad I stumbled across your channel. Thanks!
@MitchsScooterStuff
5 жыл бұрын
Thanks Chris, welcome to my channel!
Is this the same on the honda zoomer x? or is it different area? also how do I get to the spark plug?
Thanks for showing this complete process.
@MitchsScooterStuff
8 ай бұрын
My pleasure
Perfect !!! Congratulations !
Great job ! Thanks Mitch 😊
Great video. Thanks for posting it.
Thanks for the video! How important is it to measure torque on the wrench? I don’t have the tool and don’t want to buy it if I can get away with it
Great job! New Sub! I just picked up a 16 Ruck👍
You rock man. Made my life much easier with the Ruckus:)
@MitchsScooterStuff
2 жыл бұрын
😄🙌🏼🙌🏼
awesome video, easy to follow, thank you!
@MitchsScooterStuff
5 жыл бұрын
You're welcome Larry!
My manual specified to use API 10W-30 oil except resource conserving. Clearly I bought resource conserving oil and changed the oil before I realized this! Should I changed it again to one without that label?
You make fantastic tutorial videos.
@MitchsScooterStuff
6 жыл бұрын
Thank you Jeff!
Fantastic video! Thanks so much!
your the best Mitch!
Great presentation! Thank you!
Hello Mitch, Where can I buy the O-ring? help me please.
Thanks, I’m gonna change my little brother’s Ruckus right now!
Hi, Your tuto are amazing and very easy , thank a lot from Paris 😎😎😎
@MitchsScooterStuff
3 жыл бұрын
Glad you like them!
Great video lots of help 🙏🏽☺️
Thanks for video Mitch
I can’t fit a torque wrench on the bolt for the oil screen :/ if I take off the exhaust bolts and slide it what torque do I need to re tighten the exhaust bolts 2? I tried everything to get a torque on that bolt and the exhaust pipe is in the way
i share this video with everyone, great job
I will change my oil tomorrow. Thanks!
Thanks Mitch great video !
Thankyou never changed oil in one of these before thanks for the video
@MitchsScooterStuff
2 жыл бұрын
Glad to help
Is a torque measuring wrench neccessary. I want to change my oil while on my tour and dont have that wrench.
Thank you! Very clear and concise, appreciate it!
@MitchsScooterStuff
3 жыл бұрын
Anytime! 😎
Awesome video. Thank you!
Great video brudda
As soon as i saw asl i knew what you were saying instantly i have a deaf mother and love asl. But thank you for the information i have a 2022 honda ruckus and i need to do oil change
Love youre videos i have a purple 98 honda elite 50 and in haveing some bad mid range Sputtering and its my first good scooter
@MitchsScooterStuff
6 жыл бұрын
Thank you Bubba! I would check the air filter, replace spark plug, and check CVT, maybe the rollers have flat spots
@600bubba
6 жыл бұрын
Mitch's Scooter Stuff its better after putting a new ngk spark plug and air filter but my roller weights are done. Picking up new ones from the shop. What type should i get
@MitchsScooterStuff
6 жыл бұрын
That's great! I went for this one amzn.to/2u8RcAb