Personally I've never seen a better welding table design, Excellent job.

Отличная работа. Подставка под горелку зачёт.

There are people who complain about ‘not having, so can’t do it’. Then, there are people who DO THINGS. 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

Everything in one place. Convenient, practical, and space saving! You need a sign: "Cà Lem's Artisinal Fabrication Shop and Dream Maker" You do great practical and artistic machine shop projects. You're the Man! 🙂

Great weld table. I'm sure the rotary part will get more use than ever expected.

@farxodjontilovov6780

5 жыл бұрын

Manga yoqdi zur aka manga telifon qiling+998913393301

Wonderful job Big Boy you have natural talent !!! It’s nice to see somebody taking pride at whatever they built !!! 👍🏼💯

6 жыл бұрын

thank you, sir!

Very impressed by the design and execution of this table. Well done!

That’s a work of art that table and I love the heavy to. It rocks.

Bad ass welding table bud. You can tell how much thought went into the design and building of this table. I love your lazy Susan or rotating part of your table. I know that part alone is going to get a hell of a lot of use. Really makes me wish KZread was around when I was doing metal fabrication. I have built quite a few tables during the time I was doing fabrication work, I could have used something like this at that time. It's been 10 years since I've done any serious fabrication and have lost my shop so I have gotten rid of most of my tables or benches. I still have my main welding table which was just a basic table that I got the frame from my Father in law well over 20 years ago. The frame was made from galvanized steel and was sturdy as hell when I got it from him. I eventually cut and welded a metal top made from 1/4", cold roll steel plate that's 3' X 6' which I completely welded all edges onto the table frame worked great for me. Being able to put my ground anywhere on the table and being able to place the piece I was welding onto the table and easily being able to weld on it was great. Especially for smaller pieces that a ground clamp would have been in the way. Having the table top being 1/4" thick worked out great when I needed to persuade pieces of joints together with anywhere from a ball pein hammer to a 10lb sledge hammer. Having all edges of the table tob welded made sure that the piece I was working on moved or bent like I wanted without damaging the table. I wish I had put more thought into like you did to make it easier to clamp pieces down instead of welding clamps to the table top

6 жыл бұрын

yeah. that rotating part worked good for me, actually helped me alot. but the problem my ground goin through the bearing and now it's kind of stuck inside. I have a plan to upgrade it into the automatic rotary for tig weld. with a longer shaft and puly conect to the speed control motor also i can put my ground on it.

@mrbratt69

6 жыл бұрын

Cà Lem That's a pretty good idea, I wouldn't of originally thought the bearing would have offered problems with the ground but I understand why now that I think about it.

@HowToTutorialHelp

5 жыл бұрын

If you want an electric rotary for an upgrade think about a foot pedal for it that makes it spin faster or slower from pressure.

@sandralubiantoro3690

5 жыл бұрын

James Pratt knlllll9.l9llllmklll.lmll Lkllllklk9j jljkh

@sherischneider2672

5 жыл бұрын

Cà Lem Awesome table.............Question; Is there a spark, slag, scrap fines drawer under the table top over your tool drawer, etc?

Amazing project! Very impressed by the quality of thought behind ur design.

I Would SO love to have that table ! Best one I have ever seen.

I dont understand all the thumbs down.... this young man has a ton of talent, and he`s doing something with it!!!! That`s ALOT more than i can say for all the negative nancy`s in here.

Отличная работа! Well-executed work!

One of the best I've seen!

I've seen a lot of weld tables and i have to say that's one of the best design's i've seen so far .

6 жыл бұрын

thanks, buddy!

That is a very well thought out table. I must make one for my everlast welding equipment.

the table is metal, the music is metal, this video is metal I love it.

VERY Talented young man!!! And I must say it is quite refreshing to see someone making videos about construction/fabricating from your part of the world, actually searing SHOES, Pants, and protective clothing! You sir are definitely a Professional and a skilled man. I have been a UA local 130 pipefitter/welder for 37 years, and am very impressed with your skills, and stunningly impressive designs. (you obviously had training in CAD/fabrication)You will go far in this world, which is very unusual for your generation. Respect!

@beershop3676

4 жыл бұрын

The best of the best from what I have seen. I have watched hundreds table building videos.

That's bad ass. I like the turn table. Never would have I thought of that. Awesome

Nice design and function. Enjoyed watching the build.

Really impressed. I'd love to watch a re-edited version of this video at normal speed and the background music replaced with a narrative of you talking us through the build. You're very talented.

5 жыл бұрын

thank you

@mikemarler8224

4 жыл бұрын

I second that. I'm a huge fan of Calem, but can't handle the wretched music track on this one. Just a little narration on some of the details would be awesome.

@organogardener9210

4 жыл бұрын

Agreed. Third this request. Thanks

@trakyboy5128

4 жыл бұрын

Yeah, ditto, and definitely w/o the music 😝😵

@meowmeowshow6273

3 жыл бұрын

@@mariusthefaker9339 By the Sword Ethan Meixsell

That welding table is boss !! Nice job

This is fun to watch now that I've seen the 'hammer' episode. Very cool foreshadowing of future projects.

the little riser thingy to get the material level under the saw is a nice idea

Hồi giờ toàn coi clip của nước ngoài. Giờ người Việt mới có những clip rất hay về cơ khí như thế này. Rất ủng hộ kênh.

6 жыл бұрын

Phat Phan Huy cảm ơn bác nhé

@ngocdungao6675

6 жыл бұрын

Cà Lem cho em hỏi máy cắt đó ở đâu bán và giá bn vậy ? Em cám ơn nhiều

6 жыл бұрын

khó kiếm lắm bạn ơi. mình săn hàng nhật bãi

@THIENNGUYEN-bo6tw

6 жыл бұрын

Thấy cũng tự hào. Thanks bạn

great project! I reall like the band saw, looks very durable. Keep up the great work - greets from Germany

6 жыл бұрын

thanks bro!

@jinrai1945

6 жыл бұрын

q

@heribertoortiz7484

5 жыл бұрын

bl0ckbust3r from South Texas USA ✌️

@williewilliams6261

5 жыл бұрын

What brand or name is that bandsaw?

@DinAlter

5 жыл бұрын

@@williewilliams6261 www.ebay.com/itm/Shindaiwa-RB120FV-Flat-Vice-Band-Saw-Vice-Contour-Function-Fast-Ship-Japan-EMS-/163611661449?oid=153388540443

Mr.Ca' Lem.... superb... mind blowing job... you made everything handy.. thanks.. God bless you.

Great Job! I enjoyed your build very much. Especially liked the adjustable holder for the MIG torch on the spinning table! Cheers from Canada!

5 жыл бұрын

thank you Todd

Nice work, lots of good ideas built into that table. I like looking at others' welding tables because they are each different, and tailored for the builders' particular conditions and preferences. I made the mistake of trying to build somebody else's idea of a perfect welding table from drawings once, and I didn't get very far before realizing that it wasn't going to work well for ME. Ended up cutting it up and building something different that did.

I gave you a like 4 months ago! I watch this again today! and I want to give you another like again. :)

Another great project. Here you see a man with a good working brain. Nice & need perfect Job. Congratulations.

the production gets better and better dude its amazing

6 жыл бұрын

Mishael De Guia hope to be like u someday sir :)))

Прекрасная работа,отличный верстак.Мастер что надо,привет из России.👍

Amazing work, great music!

Only one thing to say: EXCELLENTE JOB!!! Made it ONLY for you. i've got no words, it's an excellente table Bro!! (sorry my english, i'm a little rust). Greattings from another "welder" from Cordoba, Argentina

How wonderful it is to sit here and watch your beautiful work. So much better than the stupid war we had!

nice job man impeccable, the best music.

How could you have a single thumbs down. Some people can't be pleased. This is amazing!!! Way better than my welding table.

@f4dphantomII

4 жыл бұрын

Probably more thumbs down for the music than the build, which was awsome.

@mattryan9376

4 жыл бұрын

Or that shitty paint job

@mitsumike6g729

2 жыл бұрын

I didn't thumbs down but if I did it would be because everything is tacked the only thing that got a full Weld all the way around was the goddamn Caster lol

That is awesome work. I like the fact that it is all even across. Great job!!

I was going to make a welding cart but after watching this I think I'll just make a welding table on wheels. Great job. Thanks for the insight.

@Supercukr

4 ай бұрын

I used this kind of setup before, but even in my small shop I ended up having better experience having separate welding cart and table work better. if you have your machines below your workspace you will end up damaging the outer covers and the hoses and cables will be in the way all the time. But this is a very nice set-up and I will use it as an inspiration in my own build of new fab table.

Epoxy some magnets on a power strip and keep it on the clamp side of the table for just in case you need to do anything outside so you can have multiple outlets at your table instead of using a bunch of extension cords...

👍👍👍. Очень понравился станок для распила металла .

@MrShuriksasha

5 жыл бұрын

Я даже не знал, что такие есть. Теперь у меня жаба.

I've watched quite a few videos on building welding tables lately and this has got to be the most well thought out design. I especially appreciate your use of proper safety wear throughout the video. I'm tired of watching goofs that wear shorts and flip flops in a metal shop!

Nice job, great design, great music! Metal for the metal!

great job!!

6 жыл бұрын

thank you so much, man!

@elchatodegto

5 жыл бұрын

@ what kind of band saw you have? Is pretty nice . Can you share model number and where do you get it. Also the adjustable roller. I will apreciate that alot. Thanks, NICE TABLE

@laokill1586

5 жыл бұрын

@@elchatodegto ออ

@kdtools1309

5 жыл бұрын

@ quá tuyệt vời anh ơi

Парень, ты крутой!)))

You are so young and talented, made a hard job look easy and enjoyable.

That's why i love to be a locksmith! Great job and a very good idea

As a welder I truly appreciate your work. It is amazing. I saw the anvil you made and had to subscribe. You have great talent and i was wondering what your process is for building what you make from idea to completion. Also where did you acquire your skills.

6 жыл бұрын

thank you for enjoying. when ur head is tired, ur hand is free JUST go ahead and do something. that's how i improve my skills.

Perfect

Hell of a table, outstanding job

FINALLY some proper tunage on KZread! Well done sir!

Muy bien amigo excelente. Mi bodega esta en total desorden hare una igual pero mas grande. Saludos desde nicaragua.

6 жыл бұрын

thank you, sir!

Great!!!

6 жыл бұрын

phucnguyen CNC thanks a zai. Bữa nào e qua phay cái rãnh nhé

@phucnguyenCNC

6 жыл бұрын

Nhanh nha e, để lâu quá a quậy banh máy là ko phay đc nhé, hi

Hey Man that is a piece of art. Kudos . A dream welders bench. I need to get a Mig setup.. Only used to stick and Tig..But you have convinced me ...

That was a brilliant idea to build a table . You don't have to work on the floor anylonger . . . And it looks very great . Congratulations !

5 жыл бұрын

thank you!

👍👍

6 жыл бұрын

I watched your table before, man! You also did a great job!

@eloyworkshop541

6 жыл бұрын

Well, coming from someone like you, it's a real compliment, the truth is that we handle the same subject matter, I love to see how you work and your projects are amazing! a big hug and greetings from Spain

@ironmyno

6 жыл бұрын

No plans, on the fly. He Just plain gets it. You cant teach this. Subscribed.

EXCELENTE TRABALHO !!!

Lem, you do beautiful work. About six months ago I dropped an angle grinder on my leg just like the one you used in this video. In about a second the grinder cut through skin, muscle, tendon, bone, nerves, veins and arteries. It dug deep into my leg, as far as it could go and when I took it out it was still on, because I left the suicide switch on. So, after 40 years experience in metal and fiver glass workshops working with this tool it jumps out of my hands and I would never have believed that this would happen to me. Keep the blade guard on except for the rare exception, use the handle and use safer substitute cutting tools when possible... please take good care of yourself.

What an awesome table! Nice job dude!

Hey!! Ca lem, like se Say un México, you are a CHINGON!!!,

Dude I think you would really like SilverChair’s music.

Two thumbs up - because I only have 2 hands... Packed a lot of good features into one single table!

Cool little bandsaw. I need one. Great project. Thanks for posting.

what model is that band saw?

Beautiful work! Sir, I know this sounds weird, but can i ask you where you bought that saw? The one your using in this video

5 жыл бұрын

i bought it from secondhand japan's machinery

@syamsidisupandy8561

4 жыл бұрын

Can you share details brand and model of that saw? Its band saw machine right?

@oldowl4290

4 жыл бұрын

@ Your table is fantastic! And ss someone else asked, I'd love to know the name and model of your small bandsaw.

4 жыл бұрын

@ thương hiệu và mô hình của cưa là gì?

Excellent workmanship Sir. And Thanks for sharing.

I’m liking the rotating base idea. Getting ready to build a table. Definitely incorporating that feature in it for sure. I can’t tell you how many times I’ve been welding widgets and needed exactly that. Great job.

Hi great Table!!! 👍👍Definitely I'm taking some ideas for my own. Also I like your band saw can you send me what brand it's and where I can get it, how much cost tank you and good work!

@ozzmann3217

5 жыл бұрын

Esteban De Lorenzo I’m interested in that band saw as well pretty killer setup

Got disapointed at the sloppy paintjob, besides that its a hell of a table!

Wow! Brilliant editing / choice of music at 10:07. It's like you're 'playing the table' with the grinder. Bravo!

Great video, very well done. I’ve never seen a jack like that. Love it.

6 жыл бұрын

thank you, sir!

@johnnydoe6255

6 жыл бұрын

Cà Lem it is homemade?

Legal muito bom😨😱😲😎😎👍👍👏👏👌👌

Great table! Thanks for sharing. Who was the last sound track by?

6 жыл бұрын

thank you, i dont remember what song coz i got it from utube library

@MrAndreasarria

5 жыл бұрын

kzread.info/dash/bejne/n5aI0dKaZ5uWc5c.html

Awesome table. I'd like one of those for my everlast welders for sure.

Lots of creative cleverness and know how...good video!

чувак ты красавелло

@ZOV6665

5 жыл бұрын

Красавелло...))) Как интересно он его перевел?! )))🤣👍😉

Cai may cat ban dang dung. Bao nhiu tien do ban

6 жыл бұрын

3 triệu bạn ơi

@khoinguyenindustry

6 жыл бұрын

Cà Lem bán em 1 cái dc ko a

@khoinguyenindustry

6 жыл бұрын

Cà Lem làm sao đễ liên hệ với a

@hoanghungle3641

6 жыл бұрын

Đắng cấp của CA LEM VN ko thua kém các nước Âu Mỹ đâu nhé .

Still watching while commenting great job all parts and accessories will be so useful. That bandsaw and roller need to get one

6 жыл бұрын

thanks!

You really build quality products. Nicely done.

6 жыл бұрын

thanks

SHINDAIWA . ROTARY BAND SAW brand. for someone need to know :))

@beershop3676

4 жыл бұрын

Thanks for sharing!!!!!

I'm thoroughly impressed!!! Killer design....

6 жыл бұрын

thanks bro

Great looking table,i really like the turn table idea.

that is literally a work of art 😍

nice work Cà Lem!!! thanks for sharing it...

That Band Saw kicks A**. GREAT Vid & Build!

6 жыл бұрын

thanks!!!!

Damn bro !! I haven’t finished watching the video and I gotta give you props ! You really get into your imagination and work it thru. Already just now subscribed and look forward to watching some more. I’m very new to welding and trying it out on my own so people like yourself are some mighty high goals to achieve

6 жыл бұрын

thanks, buddy! me too, new at anything, just go ahead and do it!

that table is fantastic, greetings from Colombia

6 жыл бұрын

Daniel Boom thank you sir!

Great work! That was a nice table.

Well done! Totally jealous, and now I'm gonna want to make my own.

Awesome job !! Looks great ! only $0.02 I could add would be to cut your stock/sheet metal vertical in the band saw. Great job. I enjoy these no talking, more doing videos. nicely done.

One of the best ideas! Im saving it.

Excellent work and perfect music! Good on ya mate!

Holy shit this was in my recommended. I can’t believe this video was 4+ years ago already. Holy crap.

Great build !! I love the bandsaw !!

good alternative for expensive welding tables

Best table I’ve seen so far

Nice build. Thank you for sharing this.

Man! You do these things with an elegance and artistry that I’ve rarely seen rivaled. Keep up the great work!

Excellent table project!