So straight forward and gets to the point, without sillyness. Sometimes its good n fun in some videos but also sometimes we just want to get to have all seriousness to just get the job done. Thank you I will be watching more from your videos. Thank you

Excellent instructions. Good idea to add putty when mounting the faucet.

Thanks, Everything worked great. I got the same faucet and followed your detailed instructions.😊

Great vid. Thank you. Great camera view. Well spoken and detailed.

Thank you!! This video helped me so much.

Thank you!! This was very detailed and helpful.

Unless the owner preferred the handle to point front, otherwise the handle should be mostly on right or left side. I have the same faucet with handle on the right side.

@tammymendalka2402

Жыл бұрын

If it is positioned to the right or left and there is no space in the back for the faucet dial to rotate it has to be positioned in a different way. Still functional

@theshop5331

9 ай бұрын

its a grossly oversized faucet for that location, probably couldn't rotate fully if on the side

Thank You!!!

Great video

Thanks Man!

Pretty faucet

That sink deserves a much bigger faucet.

@darnokfaucet

3 жыл бұрын

This a Kohler faucet, 22-1/16" height, 9" spout reach.

@theshop5331

9 ай бұрын

lol, i was thinking that too, could it be any more grossly oversized??

When installing a faucet on a new countertop we always install it before dropping in your countertops. It's a lot easier, no need to go under your cabinet, unless you have to.

@MichaelConner56

3 жыл бұрын

You are 1000@ % correct...unfortunately, my countertop guy installed the sink before I could hook up the faucet...my countertop doesn't have as much space behind the sink as his does...looking for a small handed guy with longer arms than mine...lol

😊❤

The screw holding the faucet from under the granite should be front and back, now side to side.

@renegerald3289

3 жыл бұрын

you probably dont give a shit but if you are stoned like me atm then you can stream all the latest movies on instaflixxer. I've been streaming with my brother for the last days :)

@oakleychandler3697

3 жыл бұрын

@Rene Gerald definitely, I've been using InstaFlixxer for years myself =)

@User37621

Жыл бұрын

Yep as per my Kohler installation directions

Good job but you forgot the tape on the valves

Hi.If i don`t have plumber putty what can i use?THanks a lot!

Those two screws are for tightening faucet to top not for leveling ! Screw nut hand tight then tighten screws till faucet is tight don't over tighten ! The top and cabinet should be level when installed.

Does anyone know the diameter of the hole cut in the granite for the faucet. I have a brand new faucet that comes with instructions with no size for the hole to be cut and I don't have vernier calipers to measure it. By just a ruler and my eye it looks like 1 1/4" across the tread. Is there a common hole size ???

I think your video is really going to help me tomorrow. Which faucet is this?

@Picuala2

2 жыл бұрын

Kohler Faucets- Sous R10651-SD-VS

Can you do this with a pull down faucet that comes with a mounting plate & just not use the plate?

What size braided hose is that to be connected to the hot and cold

did your faucet come with braided hose attached

@#$%& he should have used NON STAINING plumber's putty, (for granite or marble-especially). GOOD VIDEO

@pistolpaul1982

2 жыл бұрын

TRUE!!! oil from the putty WILL stain the granite!!!

I’ve got the same thing in my apartment, but my landlord installed it. It’s been about three months now and the faucet has become loose from the granite top. How do I tighten it up again, or should I just use some silicone around the bottom?

@wandygonzalez8078

3 жыл бұрын

I have the same problem

@federicotan2800

3 жыл бұрын

I believe you just have to retighten the screws on the bottom of the sink that holds the faucet

@johnzabecki

3 жыл бұрын

@@wandygonzalez8078 o.k. I’ll take a look under their again and get back to you .

@jmthomas3462

2 жыл бұрын

Yeah my faucet comes loose after about 4 days. I have to keep crawling under the sink to tighten it. But the action of swiveling it back and forth between the two sides of the sink always ends up making the thing come loose again. Really frustrating.

@FatStimpyCat

2 жыл бұрын

@@jmthomas3462 ....and I was thinking about getting this faucet 😕

What about sprayer hose?

leveling it?? going to shim it or the countertop?

How to adjust getting low pressure

Never apply putty to a stone surface. The stone will pull the oil out of the putty that keeps it malleable. That oil will also permanently stain the surface. In this case the stain won't matter, but I promise you that in less than a year that putty it going to crumble like an overbaked cookie; rendering that putty useless. #DontDropYourPlumber

@mjbug

3 жыл бұрын

You are right! Don't need putty when rubber gasket is used, putty tends to dry out and fail quicker than the rubber. Rubber gasket alone can do the job of sealing or use silicone

@kevinparfitt2166

Жыл бұрын

Can I use plummers tape instead of putty.

@tammymendalka2402

Жыл бұрын

But for the meantime it works right?

Are not the set screws suppose to be front to back?

@tammymendalka2402

Жыл бұрын

In this case it would interfere with dishwashing.

Great, I needed to see the water hookups, but your arm blocked it

Installation mitigeur

"Fawacet"

Faucet opening/closing handle should be facing to the right side “ NOT TO THW FRONT? Seems like you’re a newbie

must be very limited on space, horrible kitchen configuration

Toilet seat