No video
Kraus Installation Series - QuickDock™ Technology
Jon gives you step-by-step instruction on how to install a Kraus Faucet with QuickDock™ Technology. The Oletto™ Commercial-Style Kitchen Faucet is featured in this installation video, but you can use these instructions for any Kraus Faucet with QuickDock installation.
You'll Need:
- A Crescent wrench
- A Philips Screwdriver
- Silicone Caulk
Steps:
- Disconnect the Old Faucet (0:52)
- Install the Deck Plate (1:31)
- Install the QuickDock Mechanism (2:23)
- Mount the Faucet (3:19)
- Connect Supply Lines (4:14)
- Attach the Sprayer Hose (5:23)
How to Install a Kraus Drop-In Sink:
• Kraus Installation Ser...
Shop the Oletto Collection:
www.kraususa.c...
Пікірлер: 51
dude very helpful, i got the faucet up and running in under 10 minutes thanks to you. Watched the video once and put the faucet up so quickly. I love the "quickdock" not having to go under the sink to put things together was a life saver.
@WindWarriorsFWPR
3 жыл бұрын
What is the model of your Krauss Faucet you have? It it used the same Easy Install Assemble version as the shown in the video or a different version of the same type?
@nitishb17
3 жыл бұрын
@@WindWarriorsFWPR Mine is Kraus Oletto Series KPF2631SFS. It uses the same easy install module used in this video.
@gsoltis29
2 жыл бұрын
Did it come with the quick connect thing for the sprayer hose? I just ordered one and was wondering
@nitishb17
2 жыл бұрын
@@gsoltis29 it comes with everything you need in the box. It's been working great so far.
@gsoltis29
2 жыл бұрын
@@nitishb17 thank you !
Good in theory but if your Laminate counter top has had some water damage, this clamping system will only further damage the crumbling particle board underneath. At some point when water starts to soften the counter, the faucet will become wobbly. I prefer the traditional big Lock ring system
@lovablebigt
2 жыл бұрын
This is exactly what is happening with my aunts Kraus. I need an idea on how to fix it..
@badger0888
2 жыл бұрын
@@lovablebigt From underneath the counter, I added a wooden block to support the crumbling laminate. I cut a piece of pressure treated wood, drilled a holes and added lots of Silicone sealant. Sandwich it between the counter and clamping assembly. kzread.info/dash/bejne/dnx1t6WMmK2plag.html&ab_channel=BrantonConstruction
@beebee2731
2 жыл бұрын
Your problem is you need to address the damage to the counter.... regardless of faucet choice.
I suggest checking the gaskets before connecting to shutoff valves, in order to make sure each is properly in its position. the gasket has a dome shape screen , easy to get damaged
Love your product. Had a problem with the spray end on our first faucet and they immediately sent one out. Now we just bought our second faucet. We will be buying a third and fourth. Love your product and love Costco where we buy them. Thanks.
The Way I want it🙏😊👑🌟💪💪
@krauusa My aunt has this type of faucet but now is really loose and would at the base how do I go about tighten it? I looked underneath the sink but is to tight and no tools can fit in there answer please
I hooked the faucet the right way but. I can't get any hot water why? and all the faucet in the house got hot water?
Do not apply teflon when using compression fittings!!! The water lines already have rubber fittings. I’m shocked this guy works for Kraus. The Teflon can get hung on the rubber gasket causing leaks.
My 2 years KPF-1650 Krauss metal handle drop a bit when in vertical position and cold water flows . How do you tighten the handle?
@KrausUSATV
3 жыл бұрын
Hello, Thank you for bringing this issue to our attention. Our top-rated customer service team would love the opportunity to assist you and help remedy this issue. Please contact them at 800-775-0703 / customerservice@kraususa.com for assistance. Thank you!
What happened to this mount? None of your olleto, bolden etc faucets come with it and I can't find it sold anywhere.
Just installed a KPF-2631 Oletto. Install went fine, but when I pull the lever towards me, I get hot water. Pushing the lever away (towards the wall) switches to cold! Lines are connected to the correct valves underneath. Could the cartridge be installed incorrectly? If so, how can I fix this?
@michaelwright1602
2 жыл бұрын
That is how my Kraus Bolden faucet operates. If you want to reverse the valve, simply swap your hot and cold water lines around.
can u tell me how far the sprayer suppose to come dwn? doesn't seem far enough
Nice
I got Kraus facet after watching this video since I liked the fact that I don't have to go under the sink to tighten up the screws and etc. I was wrong. Same old style where I have to dig under the sink and tighten up the screws and etc. Even the weight for the spray hose needed screws. Not sure if the US gets cheaper version or they cheaped out for the recent models. Very disappointed.
Can the pre attached hose be disconnected from the faucet itself to be cleaned out or replaced?
Video on the under mount process?
@marcelo403polo2
11 ай бұрын
what made you to think it would be any different???
@bigbawsz2054
11 ай бұрын
@@marcelo403polo2 uhhh, is that a serious question? Obviously it’s different for anyone with common sense
@marcelo403polo2
11 ай бұрын
@@bigbawsz2054 No dude. Common sense tells me it is identical install. You might only ignore installing plate which covers other two holes. Typical undercount is only one hole
@bigbawsz2054
11 ай бұрын
@@marcelo403polo2your common sense told you it’s wrong. It has to be beveled and sunk into the wood. Then lay the quarts or marble top over. I just had a contractor put it in. It was way different then this.
Is there a video on how to replace one of the water supply hoses?
@KrausUSATV
3 жыл бұрын
Hi Richard, most of our faucets come with integrated waterlines that are built into the faucet itself. if you are looking to replace the lines on a Kraus faucet, Please contact Kraus customer service at 800-775-0703 / customerservice@kraususa.com and we will be happy to assist you.
@KrausUSATV
3 жыл бұрын
@@vette73 Please feel free to reach out to our Service Team at 800-775-0703 or via email at customerservice@kraususa.com and we would be happy to assist
Is secure dock the same as quick dock?
what about threading it into the spiral neck/ hose support?
5:13 You guys really use screened washers there? I've never seen that before. Isn't it problematic to have screen there to accumulate deposits there and have to clean them out? Much more user friendly to only need to clean out the aerator at the faucet end. Personally prefer to not have any screening to built up debris anywhere in the fixture...
@KrausUSATV
3 жыл бұрын
Hi Dave, we do use screened washers as this can prevent debris from entering the faucet, thus lengthening the life of the faucet itself. The screened washers are removable if you prefer to install the faucet without them. If you do this, be sure to replace them with regular rubber washers, or use Teflon tape on the threads.
@davec3651
3 жыл бұрын
@@KrausUSATV Can be hard to find replacement gaskets of the correct size. You should consider including a pair. To reiterate, it just doesn't make much sense... we're always instructed to hook up the water then flush out the lines before use... but how is it going to flush debris out of the lines when the intake valves have these fine mesh screens on them? Just some feedback, it seems curious to me.
@livewire2474
2 жыл бұрын
@@davec3651 Hey Dave those screened washers are junk in my opinion both of them failed instantly when I did my install. I made my own rubber washers for it. We contacted kraus about another question and told them of the poor design on the washers. The sent us replacements at no cost so yes I agree they should add extra washers in their faucet kits
Good faucet but spray head doesn't last. Stream and spray option start to malfunction and water flow cuts in half. Bad customer service and no head replacement. Not worth the money.
whats the size of the water supply valve used?
@michaelwright1602
2 жыл бұрын
Standard US 3/8" connections. No different than any other residential faucet.
I bought the KPF-2522sfs from Home Depot over a year ago and just now tried to install it. Everything went well until I turned the water on. Nothing! All the connections are fine and water is reaching the Quick connect mechanism, which is different from the one used in this video, but none from the faucet. The installation manual is not helpful in resolving the issue. The manual said to remove the spray head before turning on the faucet, but there is no way to do that. It seems their is a disconnect between the manual and the spray head, It seems someone had purchased this item before and return it, because I observe water coming out of the hoses after unwrapping from the box. Home Depot re-shelved a returned item.... Just my luck to wait so long to install it and that on a Saturday when customer service is closed....
@KrausUSATV
3 жыл бұрын
Hello, Thank you for bringing this issue to our attention. Our top-rated customer service team would love the opportunity to assist you and help remedy this issue. Please contact them at 800-775-0703 / customerservice@kraususa.com for assistance. Thank you!
@WindWarriorsFWPR
3 жыл бұрын
@@KrausUSATV I bought a KPF-2631ch model Faucet, It was and open box and unfortunately came with the missing Easy Install Assembly Part. So I ordered separately from Krauss USA, the Easy Install Assembly part # KP2762 but it turn out to be very different from the one shown on this video. Also my Faucet do not fit with the part that I ordered #KP27262 . So I think the one one this video es the one I need to get. Can you please get me the part # of the one on this video?
@KrausUSATV
3 жыл бұрын
@@WindWarriorsFWPR The replacement part that you mentioned is not one which is included in our product catalog. Please contact our top-rated customer service team at your earliest convenience and we will be happy to send you the correct replacement part free-of-charge. You can reach them at 1-800-775-0703.
@KrausUSATV
3 жыл бұрын
@@WindWarriorsFWPR We have opened a customer service case, on your behalf, for your convenience. Please contact Kraus Customer Service and ask them to refer to case number # 389657, and we will get this squared away ASAP.
Can you switch the handle to the left side?
Have facet no ID to hot cold and directions?? Really.
@KrausUSATV
3 жыл бұрын
Hi, Kraus waterlines are color-coded with red and blue material braided into the lines. Red is your hot line, and blue is for cold. If you have any further issues, please contact our customer service team at 800-775-0703 / customerservice@kraususa.com for assistance.