FUN...FUN...FUN!!! This is what the hobby is all about. 👍🏻

@RCVideoReviews

4 жыл бұрын

Yeah this is a fun little plane. Very carefree.

After waiting MANY weeks, setting an email alert and checking HK website almost daily, I finally saw TWO of these MX2s come available in the USA Warehouse last Friday (4/22) morning, ordered it (the other one sold in MINUTES after I ordered mine)and it just got delivered TODAY (Monday 4/25) in Las Vegas - That is GREAT SERVICE!! 🙏😁 I will be building it with the z-bends and easy connectors you mentioned. I will follow your lead and compare this plane's flying characteristics with the Saber 920 AND the Skynetics Swift EPP (1200MM). Thank you for your videos on this plane and the Saber 920, John 🙏😉

@RCVideoReviews

2 жыл бұрын

You're welcome. It's not going to win any beauty points but it's a great 3D trainer. Very rugged.

@re3065

2 жыл бұрын

@@RCVideoReviews John - I flew the MX2 today and it flew OK - May I trouble you with what RATES and EXPO you set - Low/Mid/High and did you set ALL the surfaces the same or different - ie, different percentages on aileron, rudder, and elevator? Also, what size prop(s) have you used? - Thanks

Great fun. Thanks.

@RCVideoReviews

4 жыл бұрын

You bet!

I read some reviews on the MX2. They say it needs better cooling for, well, everything. Looking forward to the next video on this one. Fun to watch. No damage to the plane itself is cool. AirHammer out!!

@RCVideoReviews

4 жыл бұрын

I'll let you know what I find out about the cooling. I didn't fly it long enough to really see that become a concern. I'll know more after the new batteries/motor/esc show up and I fly it. Thanks for checking-in, J

Hey, Basher is living up to its name! Bashed the Motor, bashed the Batteries, bashed the ESC and Bashed the Prop too! Great Peanut gallery behind you shouting insults,,, I mean encouragement! Yeah they were shouting encouragement. Haha!🤣

@RCVideoReviews

4 жыл бұрын

If it could go wrong on this plane it did. Dave got a kick out of how the plane got off the ground with almost no power. I'm looking forward to HAMMERING this plane.

Good job! Those are fun. I have one too but the Extra 260 Hobbyking. You'll see that, the hover routine you just did is WAY easier with bigger planes. Keep practicing and throwing that basher around ;)

@RCVideoReviews

4 жыл бұрын

That’s my hope. If I can get this thing wired I should be able to knock the cover off the ball on the big planes. Thanks for the comment.

Noice!!! I think I found my next purchase

@RCVideoReviews

4 жыл бұрын

You’ll need thin and medium CA. And get yourself some quick connects for the pushrods. The heat shrink thing....meh. I went back for the Leopard motor I discussed in the Smoked Rimfire video but they were out of stock. I’ve been wanting to try those v3 Sunnysky motors though so it worked out.

Did you use the recommended motor? "2217 950-1100KV Brushless outrunner " or what motor thrust is needed for this aircraft?

Lots of fun without the anxiety of breaking an expensive plane. After I snapped 2 slow flier props on my EPP plane (1, only because it tipped forward in long grass). I decided to use a old & cut down prop from Parkzone Trogen. The plane probably lost some of the 3D capabilities, but I don’t have 3D skill. This prop is almost indestructible! On a 600 gram plane. A nosedive into the ground that split the EPP in several places is proof. Fortunately, EPP bounces back to shape, so it was glued together & flying again.

@RCVideoReviews

4 жыл бұрын

Sounds like a creative solution to the prop problem. Good work! You hit the nail on the head regarding anxiety: There just is none with this plane. Awesome fun.

Can you do another video with the upgraded gear motor ESc and battery

@RCVideoReviews

4 жыл бұрын

Yup. I definitely will. Maybe I’ll get lucky and get some calm weather to fly in too.

I have the HK Michael Wargo version of the MX2. I bought it for the same reason as you (cheap basher). It has upgraded hardware, ball link rods, etc. I have a lot of fun with it after trying several different power combinations. So much so that I bought a second one as a spare.

@RCVideoReviews

3 жыл бұрын

How is it holding up for you? I have a lot of fun flying this little plane. It flat out encourages bad behavior. I do things with it I won't yet consider on bigger planes.

@boeing747400ifly

3 жыл бұрын

@@RCVideoReviews 330+ flights on it now. I had to do some major repairs on it recently but now it flies better than ever. Here is a link to some of my posts (posts # 185 & 186) on RC Groups:

@boeing747400ifly

3 жыл бұрын

Next step is to bind it to my RadioMaster TX16S.

@boeing747400ifly

3 жыл бұрын

For some reason YT won't permit me to post the link. You can find the posts on RCG under "Hobbyking: Michael Wargo Signature Series MX2 3D".

@RCVideoReviews

3 жыл бұрын

@@boeing747400ifly Wow, solid. 330 flights is great. I don't know if mine will last that long the way I treat it.

I had a similar motor issue with an FMS J3. Motor would just arbitrarily quit during flight. If I cut throttle it would re-start and the BEC always supplied power for the receiver. Tried new ESC, never did solve it.

@RCVideoReviews

3 жыл бұрын

I replaced the esc, batteries and motor and the problem is gone. I'm pretty sure it was a soft cut on the esc due to battery voltage sag.

I know this is not a new vid at this point but this is the most realistic account of what it's like to go out with a plan in mind for a plane and it just gives you a bunch of troubles. Great attitude! Any updates on how it flew with the 1400kv ? Hope you got some fun practice on that

@RCVideoReviews

2 жыл бұрын

It's not a great flying plane, but it's a cheap plane that enables risk taking without fear of loss. I just flew this plane last weekend and had a good time with it. It doesn't need much motor, so whatever your w/lb preference, it will probably be ok with this one.

So the esc and the motor failed on maiden day? No bueño

Four crashes ? Well that`s what ya` get . Crap motor , crap esc , and crap battery , I couldn`t think of a better test of an airframe . You have found the ultimate basher . The public is dying to know how that skylark s is going to fly with that hotdog leopard motor . I have one on the way accompanied with hotdog gforce motor . Also , your romance w/ the smoove can`t be over already . We want more flights and more about assembly . You guessed it , skylark is the trainer plane for the smoove I`ve also got coming . Thanks for being there for a geezer that`s been out of the hobby for 35 years w/ still a lot to learn about electic flight . Keep Cool

@RCVideoReviews

4 жыл бұрын

Nope, I still love that Smoove. I changed radios, so every plane I take out right now is ALMOST like a maiden. And because the radio is new to me, it feels like I'm flying somebody else's equipment. So imagine maiden flight with someone else's radio.... I have that Leopard motor in the Skylark and have flown it. I'll get some video of that one (I thought I did already). That Smoove is a brilliant plane. When that radio starts to feel like it's mine I'll get it out and fly it again. I flew the Kaos yesterday and that helped. The Kaos is an old friend at this point. Thanks for checking-in. Appreciate the comment... J

@RCVideoReviews

4 жыл бұрын

FYI: The motor tested ok on the bench--it's the one in the "Smoked Rimfire" video. ESC is a Skywalker and it's the first one I've ever had go south. So this plane is a scrapper! Doesn't matter though, the Sunnysky v3 is on the way and I've wanted to test one of those for a long time.

@michaelschindele5484

4 жыл бұрын

@@RCVideoReviews what radio did you switch to ? I hope we can see Dave`s backup strategy for the smoove . I have a degree in aeronautical science and the smoove has me amazed how that thing flys . I can`t wait to get mine ready for flight . Yahoo . Love your channel and love the planes you fly , and the judge who decides all . Thanks Man .

@RCVideoReviews

4 жыл бұрын

@@michaelschindele5484 I switched to the Radiomaster TX16s. There are a bunch of new TX16s videos on the channel about it. Go get that Smoove in the air, you'll love it. It's a very nice flyer. Appreciate the kind comments and glad you enjoy the channel. J

What is the AUW of this unit, and what size of battery do you use?

@RCVideoReviews

3 жыл бұрын

About 1.5lbs with battery. I'm using 1300mah 45c 3s Roaringtop packs from Altitude Hobby.

@North49RC

3 жыл бұрын

@@RCVideoReviews I have to get more 1300s anyway, that's awesome thanks. I might be looking into building a FB version. Seeing how light and lofty this model is it seems like a good weight and size to shoot for the given electronics needed.

Take of reminded me of my Slow poke not taking off under powered.

@RCVideoReviews

3 жыл бұрын

Yeah, it wasn't great on the maiden, but it's all good now.

@JB73691

3 жыл бұрын

@@RCVideoReviews Thanks.

Might missed this in Video but what motor you running?

@RCVideoReviews

2 жыл бұрын

It's a 2836 1000Kv.

John - I am trying to decide between the MX2 and the Hummer. From a BUILD and FLYING CHARACTERISTICS, what is your opinion between the two?

@RCVideoReviews

2 жыл бұрын

I like the MX2 better.

I think a little bigger prop as well

As I guess its a defective ESC.

@RCVideoReviews

4 жыл бұрын

Yup, definitely a bad ESC. Replacement has been ordered.

You convinced me, do not buy ANYTHING from Hobby King. Most of their product line is JUNK!

@RCVideoReviews

2 жыл бұрын

They certainly aren’t what they used to be but I e found some real gems at HK like my Crusader. You can find some good stuff if you do your homework but I do agree it takes some diligence.