They killed his dog. So he killed them all.

I think there's one practical reason to have this...the slide won't go out of battery when pressed into bad guy's gut

@anthonyreyes3922

3 жыл бұрын

You are right however they make an alternate device called a stand off device for that exact purpose it sits more flush with the frame and has serrations for grip against skin on the barrel end they really only make it for the compact models too

I have always been curious about this pistol. Thanks for showing it to us with the slide comp. I personally don’t really see a need for a comp on a 9mm pistol but would love to try it out. The install looks super easy and super secure. Too bad they don’t make these for CZ pistols. If you do have a HK pistol then you have to get one, because the cool factor is off the charts, especially with a flared magwell and extra capacity magazine. It would be like having a whole another gun without much of a layout of cash. The only problem I see is that all your friends would want to shot your pistol, which is the best part of having this pistol.

That break does make the gun look sick! I just wish the producers of John Wick stuck with that pistol as his primary sidearm throughout the trilogy, but thise who watched Parrabellum, know there will be a fourth as now that man is pissed, lol. I also laughed at your facial expressions when the plate fell off, lmao...

@tylerdurdeniii4476

4 жыл бұрын

He had to switch guns movie to movie probably were endorsed by different manufacturers. First one was hk. Second was glock. He had glock 34 an 26. No coincidence. Then the third movie was another just like fast and furious franchise uses certain hero cars in each movie

@Aaronaku

4 жыл бұрын

Shark coast tactical make the John wick comp for the p30. www.hkpro.com/forum/hk-cinema/234697-john-wick-hk-p30-compensator-8.html

@shaneh1872

2 жыл бұрын

@@tylerdurdeniii4476 next he'll use a SIG M18

I may be wrong but it looked like it helped you stay on target for faster shooting. so in my opinion .... it helped? I like the expression when you broke the target. Great video my friend

I enjoyed your review, I was debating on getting it & now I definitely am. I like how the extra weight makes target acquisition quicker especially in competition shooting. As an old chef my knives are German Geisser-Messer heavy forged steel so heavy steel is good! I might even get a comp for my HK45C..still debating that might just put the $$$ towards another HK instead like a Mark 23!

That does look cool! I've had a P30 for a while. I just sold it to finally, get the Long Slide version. I'll be getting it soon! Can't wait to shoot it!

Yes much improved results. Bad ass Range gun, Dude that's Dope!!!

Love my vp9. I look at it some times and just admire it, I compare it to my m&p and the build quality is just head and shoulders above. And I really like my m&p. Those my two carry guns.

@x.adam1

Жыл бұрын

I have both of those guns as well. I currently can do better with my M&P9. It feels a little heavier and not as plastic. You can see both on my channel. I added the Parker Mountain Machine comp. I thought that this one was too bulky and just not plain ugly.

@justanotherinternetexpert7743

Жыл бұрын

@x.adam1 . . . mine are bone stock, I like the m&p9, but for some reason, I shoot better groups with the vp9 idk if it's just mind over matter tho, because alot of these plastic fantastics are basicly the same gun with alittle different ergos. I actually have sworn to not buy anymore plastic guns, only metal frame guns for me from now on, with all the new metal striker fired guns out, they just feel better in my hand shooting.

love your vids man. one thing to mention is that it doubles as a stand-off device since it is frame mounted and prevents the slide from being pushed out of battery

Looks like it reduced muzzle flip a little, but also seemed to settle the muzzle down after the shot a little quicker as well.

The long slide kit and a red dot installed on a vp9 makes for a really accurate gun !

I just installed the rail mount comp on my USP 40. I haven’t taken it to the range yet, but I’m excited to see the results.

Really good and cool shooting . Keep it coming bro

The comp makes it look like the pistols Angelina carried in Tomb Raider which are the usp match pistols which now sell in gun broker for about 5 grand each

Have you tried the Long slide kit on the VP9? it makes the VP9 even more enjoyable to shoot.

I use the same compensator on my p30 and it without a doubt reduces the recoil by a significant amount. You just can't use cheap ammo and underpowered ammo like Winchester white and red box will cause jams.

@rdance3

5 ай бұрын

So you have the P30 not P30L? Does device fit exactly like it's supposed to? I thought the P30L had a longer rail.

@josephlegacy929

4 ай бұрын

@@rdance3you replied to a 2 year old comment lol. There’s separate models for the l and the standard

Cool guns. I used to be a HK fanatic. Your USP 40 is 1998 build as per the date code "KI".

My p30l is chambered in 40 s&w. I needed a weapon and the 9mm variant was sold out at the time. This particular match weight is sold out on the hk parts site too. 😆 but I really want one now! Does a 9mm kick less than a .40?

I am eye balling a P30L right now. It's a good deal. Might just have to do it.

Get the gray guns reset kit for the firearm. Bruce Gray is a genius. I have the LEM version of the P30 and it turns it into a whole other beast!

I think I found my Christmas present!

Slowly pulling the trigger back to fire that fist double action shot it feels like 20 lb pull. However if you use one quick motion to pull it back in dbl action it is very light like single action. The 1st dbl action pull on this hk trigger needs speed to relieve the pull weight. Try it.

I wish the comp had the quick release latch like the match weight.

"Let me shoot this thing and then you tell me how it felt!"

I have been reading about this compensator in the forums of different websites. The people whom own it haven't been to kind. Does this thing mess with the guns rails or the shooting experience in anyway?

No, you tell us! You were shootin' the friggin thing. Was there more or less recoil or no difference?

@ronquixote1739

4 жыл бұрын

I can assure you it makes a difference. My P30L ran reliably (weak ejection but consistent) until I added this very same compensator. It was then a single shot pistol, unable to eject an empty casing regardless of ammo type used.

@suomik1988

4 жыл бұрын

@@ronquixote1739 You were limp wristing it. Go tighten up your grip and report back.

@ronquixote1739

4 жыл бұрын

@@suomik1988 Same grip, better results after more shooting to loosen the recoil spring. My point above is that, yes, the comp does have an effect--weak ejection turned into no ejection when comp was added so the comp was reducing amount of gas available to push the slide back after firing. kzread.info/dash/bejne/lX55rayvqJqudrQ.html

@MA22badger

3 жыл бұрын

@@ronquixote1739 did you use 124gr? Apparently that's what you have to use for the hkp30 or vp9

@ronquixote1739

3 жыл бұрын

@@MA22badger I use 115, 124, and 147. Until the recoil spring eased up the gun had issues with weak ejection. After about 200 rounds the ejection strength improved. The compensator does work as it turned weak ejection into no ejection until I"d passed the 200 round mark. Now it ejects fine with any weight ammo and with the compensator.

Badass ! I love my vp9

Or if you prefer you can get a match grade trigger kit for it which is I believe 3 Springs and a trigger shoe

Kotaboy32 what loads where you using I noticed it failed to lock back once I ve had that issue

The triggers compared to the others do leave something to be desired.... but run great. HK is the only manufacturer I don't have too many of. I've got a usp9c and a p2000 but nothing newer than that.

@cnick6

4 жыл бұрын

Try the Grayguns P30 short reset kit.

Man it's hard to get a hold of the 30l.. lucky man 👍🏽

@tichinajarvis

3 жыл бұрын

@@minnesotanice369 gone now i need a p30L & usp 9mm

Great video! I’ve been looking at the long slide kit for my VP9 lately. Looks fun! Wonder if I can get a P30 long slide for my p30sk :)

@hulkooalgown5378

Жыл бұрын

still looking to trade?

Old video i know but for any newbies considering one and reading the comments of breaking the gun in. HK SPECIFICALLY SAYS to break the pistol in with minimum 124 grain for i forget how many rounds before switching to lighter grain loads. Some have tighter springs to break in than others. Mine however has run 115 and anything else from the start. Couldn’t find any heavy loads so just tried the 115s and never a hiccup.

Any chance that comp will mate up on a canik tp9sfx?

When you converted the 15rd mag, did you use the "baseplate" or did you just have the spring directly to the bottom of the extension body?

Isnt that compensator for the threaded barrel? How you equiped it when your p30l isn't a threaded barrell?

What size of alan head did you use to install the comp?

Youre a lucky bastard. I have HK tastes on a .22 Cricket budget. Love the video thank very much.

@kotaboy32

4 жыл бұрын

Thanks Signs, I am indeed a lucky bastard

I’m picking up my gun permit Monday. And this is the gun that I am going to get. I’m in love with this handgun. And that compensator looks just 😍

@thesunrisedriver1683

3 жыл бұрын

Please let me know if you found it, I'm in love too and looking for one.

@stizz1982

3 жыл бұрын

@@thesunrisedriver1683 yea man this gun is hard to get still haven’t gotten one yet.

@stizz1982

2 жыл бұрын

@@thesunrisedriver1683 got mines last week. Not the P30 the VP9 at my local gun store. I love it. This other gun store by me I saw they got the P30 the other day most likely they are gone. Those guns go fast.

@thesunrisedriver1683

2 жыл бұрын

@@stizz1982 congrats! The vp9 looks badass too.

@kingLuu816

2 жыл бұрын

@@stizz1982 vp9 is not as good as the p30l man if you ever get the chance you should grab it!

So this is all stock? I dont gotta buy a different barrel, cause i was trying to make it just like wick’s Gun.

Best hand gun.. Love it.

It didn't fit on the vp9 because the model you had was not a VP9L. Otherwise it looked like you shot faster and hit more often and was easier to control (less muzzle rise) with the comp on.

I'm assuming, based on the ports top-side of the compensator, that it is a Gen 1 comp?

Does the compensator bring the 1913 rail to install?

Great video

Please tell us what grain ammo you used for this video

Take a look at the Parker Mountain Machine comp for the HKP30 series of pistols. I have one on my P30L and it looks just as good as it functions!

@JaguarDieCast

4 жыл бұрын

do you need a threaded barrel?

@The_Ghost923

4 жыл бұрын

@@JaguarDieCast Yes...

I do have original P30L V1 (no safety). Where did you buy the muzzle brake? So many fakes around. Appreciate in advance!

do you have to remove the compensator to remove the slide?

put the gray guns short reset kit (the drop in one, not the full custom trigger job) it's 98 bucks and changed the entire gun. now it's both my most accurate gun and one of the better da/sa triggers i've ever tried.

@Catgat37

3 жыл бұрын

Even stock, it is my most accurate gun. It dethroned a Dan Wesson Discretion 9mm shockingly.

Do you have to put the pic rail on or will the screws work without it? I think it would look much better without it.

@The_Ghost923

4 жыл бұрын

Yep. The rail piece has to be put on it...

H&K date codes are as follows: A-0 B-1 C-2 D-3 E-4 F-5 G-6 H-7 I-8 K-9 J is not used. But something made in 1990s would start with K, 2000s would be A, 2010 and up would be B.

@minnesotanice369

3 жыл бұрын

www.cdnnsports.com/hk-p30l-longslide-v3-9mm.html

It looks pretty tight when it slides on the rail. I wonder if it damages the finish on the gun.

What holster will fit this big boy? Is it even possible to find a holster for this beast?

@Catgat37

3 жыл бұрын

There might be companies that make one 🤔. I honestly would rather not attempt to conceal carry this. While the weight actually isn't bad (even with compensator and extended mags) it is very...very big.

Kotaboy32 the Boogeyman of KZread

I would love to see your review on the long slide for the vp9

Have this comp on my vp9. My only issue is it has discolored the end of my slide. Probably from the heat.

@Antonio-ye1jv

4 жыл бұрын

Yes did same to my vp9 with this comp. With this comp on my vp9 does not like syntech ammo much. Occasional fte and ftf or both at same time.

I've been looking for a P30 long slide for years I am so envious of you

@jasonnelson2609

4 жыл бұрын

I have been looking for one as well. Hard to find.

@JPMNRB

4 жыл бұрын

They are out of stock until the end of the year, I emailed HK I am waiting for one.

@chaddjames5105

4 жыл бұрын

@@JPMNRB I know a couple local shops here in michigan that still have v3 versions for sale

@zapdotshimmy

4 жыл бұрын

Just found mine a few months ago. They got two in stock and my store snagged one of them because they knew i wanted one hahaha. I’m super happy with it

@thomasflynn5529

4 жыл бұрын

@@zapdotshimmy you're sick

I’ve been everywhere looking for that comp!!! Where can I get it?

@LinkxUSMC87

4 жыл бұрын

Hkparts.net

@LinkxUSMC87

3 жыл бұрын

@@micahb-eazy4084 .net* as i already said 😆

But their VP9 brake will fit P30.

Get the 40S&W version then get a 357 Sig barrel and it might make more of a difference

What ammo where you using?

Will it function on a p30S?

Just bought the FN S9c. Love it alot.

Does it fit kind of loose?

Do they sell a plate for a flush fit instead of adding the rail to the bottom?

@Catgat37

3 жыл бұрын

But why wouldn't you want the rail? You could put lights....and lasers on it

Did you notice a difference in how far cases were thrown?

It looks like Batman's gun....if Batman had a gun! 🦇

The screw is so tight on the rail when it comes in I can't remove it help?

@Zeecarter

3 жыл бұрын

@Mike Jones I did it was so long ago I forgot

Does hk make that rail mount compensator for the hk 45?

@yesihavebedbugs2786

4 жыл бұрын

They make ones for all their pistols. If HK is out. Go to matchweights.com they have them in steel as well.

I got a big hammer that would have made it fit the VP 9. Then get my stick welder out, put a few farm welds on it to make sure it didn't come off.

I see one problem here. When you take the barrel out for cleaning do you need to take compensator off? I wonder how long would that screw last

@kotaboy32

Жыл бұрын

Okay I have to admit, I never clean my pistols

@YasilTorvanna

5 ай бұрын

@@kotaboy32 “SHILL” “One who publicly promotes another’s cause. v. (Shills) v. shilled, shill·ing, shills 1. To act as a shill for (a deceitful enterprise). 2. To lure (a person) into a swindle.

Point Blank Range? 🤔 Are you in the Charlotte area?

Tomb raider looking gun w the comp

Van i buy this compensator off of you if you still have this sir? Please get back to me if so I can really interested in this version instead of the v2 they currently have

They even make a break for the MARK 23. Because that pistol needed to be bigger😂

very cool 👍😎🇺🇸

Dose the p30l comp work with the p30ls?thanks

@rolltide9547

4 жыл бұрын

Yes

You shot the gun, how are we supposed to judge?? Lol I was hoping you’d tell us.

Wonder if it would work with a VP9L...

@HKPartsStore

4 жыл бұрын

It won't but we are making one specifically for the VP9L.

I want one now!!! My wife won't be happy once I buy another need 2 have gun!!! 😂😂

Will they release a smaller version for the VP9?

@kotaboy32

4 жыл бұрын

They have one for the vp9

@mozzberg590

4 жыл бұрын

@@kotaboy32 thanks dad

For a compensator, it's EXPENSIVE. Why do you need SIDE VENTS to compensate for muzzle UPWARD flip? You would think that all you need is a TOP vent.

you tube going to delete this for showing an install or they changing rules again? lol love h&k

The disrespect to John Wick is CRAZY

It's that legal in NY ?

Can this be used with the Threaded Barrel?

@stevejones3383

4 жыл бұрын

Yes, it was designed to be run with a threaded barrel. If you look at it the back two holes they are solid to protect the threading.

@cnick6

4 жыл бұрын

Steve Jones Uh no this model does NOT work with a threaded barrel. There's a seperate comp for that...

baba yaga approves.

This is my unicorn

@Catgat37

3 жыл бұрын

My name is also Jacob....and it is also mine.

Wouldn't you have to take this off every time you clean it?

That USP came from palisades security’s in covert mi

Your pointblank must be cool.... the 2 here in my area in cincy suck

Is it better to get a 9mm or a 40 caliber?

At that size maybe a HK USP Elite, with 6" barrel, would do the trick better.

I'm buying it.

@minnesotanice369

3 жыл бұрын

here it is www.cdnnsports.com/hk-p30l-longslide-v3-9mm.html

Not sure I'd wanna have to take the comp off evertime I cleaned the gun

Wish they made that exact same compensator fit in my Smith and Wesson 45 M&P

Baba yaga!!

09:20 - The thing right here! Slide didn't end up at rear position after final shot! I am owner of P30 and it irritates me soo much because it happens all the time (in my case without compensator). Anyone else having these issues? I tried to change different type of ammunition (gr., manufacturer), change slide release for smaller one, modify hand grip, but eventually it results to this anyway. Makes me sad because I think it is very classy gun and very accurate too.

@Catgat37

3 жыл бұрын

I haven't experienced this. But only have about 150 rounds through mine so far. Just mounted the compensator today and hope to test it out within the next few days. Personally this wouldn't really bother me as I count my shots.

@marknomura7453

2 жыл бұрын

Yes, this happens to me also and is a result of my right hand thumb riding on top of the long slide release when using a thumbs forward grip, and is apparently a very common issue. If I am conscious of placing my right thumb over the first knuckle of my left thumb (and not against the frame) it doesn't occur. Interestingly, if you look in the operations manual, there is an illustration demonstrating a thumbs down grip (much like one would use when gripping a revolver), which would preclude this problem from occurring-makes me wonder if this is the preferred method in Germany.