I started watching you when I got my ram. You're a terrible influence🤣 keep up the good work!!

I just put a borla atak crate muffler for the chevy 350. It sounds amazing it's the 4 time I change the muffler, from magnaflow to flowmaster 44 to super 10 to straight pipe to borla. I will never buy another brand again. I run it on my srt4 as well

I’m planning on building a similar engine for mine only I don’t think I’m going for as much as you did. Do you suggest building it like this before dropping it in the truck or doing bit by bit until you get to what your going for?

Can’t wait for the new motor 🤓hopefully you put it on a dyno would love to see those numbers !

@IncredibleHemi1111

3 жыл бұрын

I am getting this setup on the dyno very soon just waiting on a shop to get there dyno

Holy.. I might actually have to build a truck my 2021 Camaro can wait 😩

Hmm would you say this build would work on my 2008 ram 5.7hemi 4x4(do wanna do some things differently) . been trying to learn so I can start messing with mine but haven’t really got the best knowledge on some things

I have a 2007 dodge 1500 5.7. I want to delete the mds and install a cam. they told me the tuning is needed to be done with a dyno. is there any kits you know of that you can do yourself?

I have a few questions about the HP with the supercharger and tuning , does it make similar HP to the competition?

Can you still use 4WD with the upgraded rear diff ?

Where did you get your pillar gauges from?

Safe to run without an intercooler?

That's respectable the exhaust actually sounds really good I'm a flowmaster super 44 guy I have a 6.2 l Ford raptor

@IncredibleHemi1111

3 жыл бұрын

Thanx boss I love this exhaust sound

Thanks for this Bro. Just spent $5450...for the cam and install. LOL! Following along as you do you yours. ~ RedEye CamRam

@IncredibleHemi1111

3 жыл бұрын

Nice mam, I appreciate the support 👍

Seen your badass window sticker logo, on a truck in Manteca ca, as I took my wife’s Charger for service.

@IncredibleHemi1111

3 жыл бұрын

Lol 😆 them mother efers

@masterflow101

3 жыл бұрын

Haha Manteca. Means lard lol

I got a 5.9 liter ram..I definitely want to do this to my truck

@Supercharged287SOHC

10 ай бұрын

It’s gonna cost more since you need to stroke it to a 408 to make decent power

I have a 2016 twin turbo ram 1500. Ive been following you from the beginning. I love your videos. Quick question though, where did you get your qa1 for the rear. Im not having any luck finding them for the 4th gens

@zachswartz9781

3 жыл бұрын

Sorry just found it in the comments. Thanks

@IncredibleHemi1111

3 жыл бұрын

@@zachswartz9781 lol I was just about to tell u how to get them.

@zachswartz9781

3 жыл бұрын

I appreciate it. This is my daily driver that I also like having fun in but traction is definitely my issue. So your KZread channel is a huge help. I cant wait to see how the new motor does for you.

@cachiforgottensoul210

Жыл бұрын

How much was it in total

.my old man told me you cant take money with you in the end so enjoy it!!

@IncredibleHemi1111

3 жыл бұрын

He's absolutely right

I have an 04 rumble bee 4x4 stock atm I plan to daily it for a while but do not want to leave it stock lol I want some decent power 400-420hp what parts would you recommend ?

@Supercharged287SOHC

10 ай бұрын

Get Eagle heads from 09+ hemis and swap it in your truck and have em ported Get a 395 stroker kit Ported throttle body Ported 6.4 manifold 1,3/4 long tube headers True dual 3” exhaust Biggest cam you can go with Custom tune ATI super damper After that you’ll need to build your transmission because it’s not gonna like it when you at 400hp to the wheels

Waiting on that built motor to upgrade ATI balancer for overdrive I’m assuming?

@IncredibleHemi1111

3 жыл бұрын

Me too man, just waiting on the phone call so I can pick up the shortblock and yes definitely getting the ATI balancer

@GarcBomber

3 жыл бұрын

@@IncredibleHemi1111 Make sure to pin it at TDC so we can use that fancy outer degree wheel!

Can a hell cat engine fit in there or 392, and still keep 4 wheel drive.

@Supercharged287SOHC

10 ай бұрын

It will cost a lot to make it work

I just got my 2015 ram 1500 just bought catback exhaust what would you do next by the way 4x2 thanks

@IncredibleHemi1111

3 жыл бұрын

Definitely tune n intake next

@KbM16

3 жыл бұрын

@@IncredibleHemi1111 thanks

I have a Vararam Intake, 87mm Ported TB, ARH LT Catless Headers, and getting a Diablo Sport I3 in a few weeks, any advice for next mod, for a 5.7 Hemi?

@IncredibleHemi1111

3 жыл бұрын

Definitely go for the 6.4 truck manifold then cam after that

@ethangross9817

3 жыл бұрын

Can you run the vararam intake with the 6.4 manifold?

@IncredibleHemi1111

3 жыл бұрын

@@ethangross9817 I don't think so

Did you change gears? I know it’s mostly a 1/4 truck. So I was thinking 391s or 410s would be in it

@IncredibleHemi1111

3 жыл бұрын

No i stayed 3.21 because of 8 speed n whipple

@Supercharged287SOHC

10 ай бұрын

No need to go above 3.92 gears on a 8 speed unless you got 37” mud tires all around

Hey nick. Have you dynoed your truck? I'm curious how much power it makes

@IncredibleHemi1111

3 жыл бұрын

Not yet , im doing dyno it very soon just waiting on someone to get there dyno in so I can dyno it on the weekend

@eddieborden4681

3 жыл бұрын

@@IncredibleHemi1111 awww ok would love to see how much power it makes with the current set up

I want to do similar mods to my 2020 Rebel, only need 25k lol

Nice truck!

@IncredibleHemi1111

3 жыл бұрын

Thanx boss

Amazing! Where did you get the QA1s from?

@IncredibleHemi1111

3 жыл бұрын

Thanx boss, bought off summit

@joshuranga5058

3 жыл бұрын

@@IncredibleHemi1111 When I checked on summit they said it wouldnt fit my 2014 ram 1500 RWD

@IncredibleHemi1111

3 жыл бұрын

@@joshuranga5058 I know it says 02-08 but they fit all 4th gens it'll be QA1 TS905

@joshuranga5058

3 жыл бұрын

@@IncredibleHemi1111 Thank you very much! I was so confused.

Whats the max power these 8spds can handle?

@IncredibleHemi1111

3 жыл бұрын

Stock probably 700whp max maybe a lil more depending if it has a good trans tune

I got a 2010 ram with a 8 speed swap and a somewhat built motor. Just headers, heads and manifold. I want to supercharged my truck but I’m afraid I might throw a rod. What is your recommendation for that?

@godspeed61zero24

3 жыл бұрын

Very low boost and you will be okay, can use race fuel on low boost tunes. But I repeat no high boost tunes

@Generallymopar426

3 жыл бұрын

@@godspeed61zero24 so I can still supercharge it on a stock block and tune it to a certain boost?

@IncredibleHemi1111

3 жыл бұрын

Yes u can I'm still stock block n on 8.5 psi. As long as the tune is good you'll be fine

@Generallymopar426

3 жыл бұрын

@@IncredibleHemi1111 thank you for your advice!

@michaelbarfield6589

Жыл бұрын

How'd you do the 8speed conversion? I got a 2012 I'd like to get that done to

Will this work with a 2002 dodge ram 1500

@Supercharged287SOHC

10 ай бұрын

5.9 or 4.7? The hemi started in 2003

Which transmission do you have?

@IncredibleHemi1111

3 жыл бұрын

I have the 8hp70, 8 speed

I have a ram but I’m also i Honda guy for that amount I rather go K series turbo and be faster and just tow my gsr with the ram

Did you lose alot bottom end torque with this setup? Well with the supercharger

@IncredibleHemi1111

Жыл бұрын

Is that a serious question lol I gained over 200 hp

@Joel83M

Жыл бұрын

@@IncredibleHemi1111 lol it really was a serious question 🤣 😂 in torque, I definitely know you gained in horsepower

(2013 Ram 1500) I have the 6 speed transmission in my truck do you think it would be worth it to upgrade to the 8hp70 trans or should I just build the current one?

@rickgehring7507

3 жыл бұрын

Depends ...how much power do you plan on making ? I have very little respect for the 65rfe (or545) but if your plan is making mid 500HP and less , there are tricks and parts that'll help it survive.....if there is a lot of NOS or any type of BOOSTED upgrades coming...... Upgrade to the 8sp, advantage is you can keep the automatic drivability, if your super serious about making BIG power #s a well built 46RH(re) is an option, but that's Manual Valve body shift it like it's a Manual trans deal.

@meccican

3 жыл бұрын

@@rickgehring7507 thx

@IncredibleHemi1111

3 жыл бұрын

I would definitely go for the 8 speed you'll always be a step behind with the 6 speed even if it's built imo

@meccican

3 жыл бұрын

@@IncredibleHemi1111 do you know of any forums or info on the requirements for swapping from a 6 to 8 speed Can't find anything probably because it would be easier and better to just trade in but I've put about 5k into my truck already so I'm really not trying to trade in Thx

@IncredibleHemi1111

3 жыл бұрын

@@meccican I would join High Performance Rams and TunedRams on Facebook and ask there couple ppl have. Also contact MMX modern muscle extreme , they have done the swap

You forgot about the yukon rear end.

@IncredibleHemi1111

3 жыл бұрын

This video is just what's currently on the truck not the previous mods

Stock headers?

@IncredibleHemi1111

3 жыл бұрын

I have American Racing Headers , im pretty sure I mentioned that in the video

Do you run it 4wd or 2wd?

@IncredibleHemi1111

3 жыл бұрын

Track 2wd on skinnies n slicks, on the street 4wd

@LesRochez

3 жыл бұрын

@@IncredibleHemi1111 awesome there’s still hope for my rwd hemi ram lol

8 speed trans?

@IncredibleHemi1111

2 жыл бұрын

Yes

Oh my God he spent so much money on this truck ! X 1000000 😆😁

@IncredibleHemi1111

3 жыл бұрын

I actually spent WAY more that's just what it cost for the current setup that's on the truck right now lol 😆

@cammedramprocharged4927

3 жыл бұрын

@@IncredibleHemi1111 well your channel causing me to spend money so stop it and I will stop You got a 6.4 now I am getting a 6.4 Jeez dude 🤣🤣🤣

@IncredibleHemi1111

3 жыл бұрын

@@cammedramprocharged4927 🤪

What’s the fuel mileage on this beast? If you drive “responsible” 😂 wanna do this to my daily

@IncredibleHemi1111

3 жыл бұрын

Honestly very good I Average 17 if I daily it. If more highway driveway it'll easily get 20 possibly a lil more

Did you pay the Labor? Or were they just helping you out for beer? Lol

Kong WILL bow down to Gemma. 🤙 #theoneandonlybaddestramonthegram

@IncredibleHemi1111

3 жыл бұрын

KONG bows to NO ONE!

@godspeed61zero24

3 жыл бұрын

@@IncredibleHemi1111 hahaha yea we will see about that. Still a good build though. Any plans on ever changing out converter?

@IncredibleHemi1111

3 жыл бұрын

@@godspeed61zero24 I'm thinking about cuz it just hits hard af with the whipple n with the extra power I'm hoping it'll hook , we will have to see when its ready

in other words you got to be rich or have mommy and daddies credit card to do this shit.

@IncredibleHemi1111

Жыл бұрын

Nope , just need hard work n save money I'm just an ironworker n my parents are more broke than me lol

@russrtspooling7702

Жыл бұрын

@@IncredibleHemi1111 thats cool man but iron workers make good money so congrats my man.

I have a 2017 whipple ram and have just a few questions. Do you have a preferable email?