Hardtwood / Wine Barrel Cabinet
Тәжірибелік нұсқаулар және стиль
Making a cabinet out of a reclaimed wine barrel *UPDATED: LINKS TO HARDWARE BELOW
Square drive self tapping screws : Small Parts-0812KQPB Steel Self-Drilling Screw, Black Oxide Finish, Pan Head, Square Drive, #2 Drill Point, #8-18 Thread Size, 3/4" Length (Pack of 100) amzn.to/3xoiuhs
Hinges (these are used in the video) : Hinge Karcy Non Mortise Hinges... amzn.to/3xnJwFx
Alternative hinges wrought iron (these are what we currently use) : Adonai Hardware "Allon" Black... amzn.to/3xiClyl
Jailer pad lock : 3" Antique Style Padlock - Iron... amzn.to/3fpPbVl
Latch : Alise Flip Latch Gate Latches... amzn.to/2WU4tvm
Wrought iron door pull : Renovators Supply Black Wrought... amzn.to/3CdrObn
www.hardtwoodus.com
/ hardtwoodus
Пікірлер: 86
Great job! Thank you so much for the quality video. So many people talk about the project and waste your time. You get right to it and do an awesome job of the video and the barrel too. Blessings, Jim
Great video, this is where I would love knowing someone who enjoys woodworking and creating a unique outdoor piece of furniture.
Great job - thanks for documenting and sharing the process you use.
Nice! I just got a couple barrels this past weekend. Plan to make my own cabinets. You made it look so simple.
@HardtwoodCustomWoodworks
2 жыл бұрын
Let me know how it goes !
Great job... it looks awesome
I’d say the best tutorial I’ve seen on this
@HardtwoodCustomWoodworks
2 жыл бұрын
Very much appreciated, thank you
FINALLY! Someone to show me how to use one of those tie-down thingies
@HardtwoodCustomWoodworks
2 жыл бұрын
Haha, they need a tutorial of their own for sure
Great job! Excited to finish mine soon!
That barrel has a new life
Great job
This is a great video and the barrel looks awesome. Starting mine today. Could you let me know what finish you use please?
Top job
Hey great build! Love this. I'm building one for my wife. Quick question. I purchased the hinges you have in the description and I did notice the slop they have. When I installed the door it drops a good bit. Should I take more off the top and bottom? What is the spacing between the hinges? Thanks for any input.
This is awesome! building this weekend! Where did the metal band on the inside of the door come from?
good evening, congratulations for the video, it is very explanatory. I wanted to ask you where I can find the hinges you put on the door and the ring to be able to open it. Thank you. Paolo.
אלוף
Very nice
@HardtwoodCustomWoodworks
2 жыл бұрын
Thank you!
Magnifique, très beau travail. Une petite question, ou trouver les charnières ? Merci
What was the moisture content of the barrel when you started? Also, if you kept this beautiful piece, how is it looking now that it has dried out?
Awesome
O my god I need one
Glass shelf Lazy Suzan on the bottom LED light in the top
Hello I’m wanting to make the same cabinet but with two doors. The issue I’m running into in my head is is how to make both doors the same width and length. I’m not using the bung hole for the doors it will be in the back of the barrel. Do you have any tips on finding the center so that both doors would be equal. I would really appreciate it. -Austin
Did you pre-drill the holes on the rings? And what type of screws your use ? I tried to drill holes before and end up breaking the bits.
Very nice 👍
Did you use special hinges or are they just plain cabinet door hinges? Good video.
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware. I’ve used a few different styles but these seem to work best so far .
@rickygibbs8354
2 жыл бұрын
@@HardtwoodCustomWoodworks where is the link for the hardware. Beautiful work.
Im doing a similar project, where did u get those hinges at?
What kind of screws did you use? Great finishing job.
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
Very beautiful! I am about to do the same. I have a little question though. Why not paint the rims in black when your remove then instead of painting them with all the tapes once its back on the barrel? This will certainly help me in my project :)
@HardtwoodCustomWoodworks
2 жыл бұрын
Hello! The only reason I don’t do that is because when hammering the rings back on and cutting them will chip and remove some paint. You could just touch it up at the end , just a matter of preference to be honest .
@danylaporte6588
2 жыл бұрын
@@HardtwoodCustomWoodworks Thanks for the answer. Again, great work. I love it!
What screws are you using please? They seem amazing. Going straight through metal and wood.
@Jo-xg6rk
Жыл бұрын
They're called self tapping screws
Is putting the spacers between the door before the hinges what’s allowing the door to fully open? Also do you recommend putting the hinges in the middle? I added one on top, middle and bottom but forgot to put something to separate the door so it’s not opening fully
@HardtwoodCustomWoodworks
2 жыл бұрын
Yes the spacers allow for the door to swing all the way open even with wood expansion. The closer the hinges are to the center to easier it will open, the hinges I currently use have some slop which helps because they adapt better to the rounded surface. I used to use strap hinges directly over the metal bands. They looked nice because they blended but they would wear over time from too much tension. Hope this helps.
really dumb question, what did you use for the shelf? Looking at tackling this build and that is the one thing I am stuck on
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey we typically will use a lid left over from another barrel but you could also get a pre cut pine circle from Home Depot for like $10, 24 inches .
What kind of hinges are those called???
Como comprar?
What is the diameter of the shelf?
Can you provide a link to the hinges and other hardware you used for the door?
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
I’ve looked everywhere for those self tappers do you have a name or code for them?
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
Messirve. I'm not going to paint it inside. I like the smell of old wine.
No parts in the description 😞. What screws and what hinges are you using
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
where did you get those hinges?
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
Paint on straps killed it for me, that overspray looks horrendous
@HardtwoodCustomWoodworks
2 жыл бұрын
The finish on this one did come out a bit funky but we have upgraded the process for the interior finish as well as the exterior since this video. Appreciate the feedback.
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👍👍👍👍👍
Can I buy one from you?
What kind of screws?
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
What setting was your jointer on?
@HardtwoodCustomWoodworks
2 жыл бұрын
Shouldn’t have to take off more than a 1/4 inch
@KevinBarnes09031976
2 жыл бұрын
@@HardtwoodCustomWoodworks Thanks I've made a couple button always struggle with the door.
what kid of hinges are those ?
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
what are those hinges called ?
@HardtwoodCustomWoodworks
2 жыл бұрын
Hey! Just updated the description with link for all the hardware.
Woodglut is nice for that.
אך קונים
Pretty ugly actually but i see that you put alot of effort into it! I think you could have done better spraying it
@HardtwoodCustomWoodworks
2 жыл бұрын
Thank you for the feedback
@thetruetruth77
2 жыл бұрын
@@HardtwoodCustomWoodworks It's not bad after all!
@mdb9920
2 жыл бұрын
Haha this has to be sarcasm. Its absolutely beautiful.
@thetruetruth77
2 жыл бұрын
@@mdb9920 That's a question of taste
@mdb9920
2 жыл бұрын
@@thetruetruth77 Ya, your right it is. But it's beautiful.
this woodworking skill totally worth MalaysiaBoleh。