GTI Timing Kit Install DIY || VW MK5 (BWA)
Автокөліктер мен көлік құралдары
Mk5 Gti (BWA) Timing Kit job DIY, how hard could it be? Turns out not much... Just 3hrs and alot of pain getting that engine mount bracket on the engine in/out. Else everything else goes smooth.......
Disclaimer: Am not a qualified VW mech... all i do is out of interest and to illustrate to any other DIY grease monkeys out there
Пікірлер: 42
Thanks so much sir you gave me all the information i was looking for to time my Jetta 5, and thats the best video for timing MK5, you basically gave all information and straight to the point...
Great video! Done virtually everything else on my 2006 Leon FR (BWA 2.0 TFSI), but this has always been one of the things i've avoided due to what's involved but you make it look so simple, great informative video and really insightful.
That engine mount can be a headache. It's the main reason why I was watching this video. I wanted to see if there are other ways of doing it easier. I think it's the most "difficult" part of the entire job. A time waster indeed. Good video mate.
@hardcore4476
10 ай бұрын
Have you found out a trick to get it back in smoother?
Great video. The engine mount was a nightmare. I had to drop the exhaust from the motor as it was hitting the tunnel and stopping the motor coming up high enough.
I like the way you have invested in tools..that's the number 3 problem that hinders potential DIY's..other than passion & drive(actually doing it) which are 1 & 2..another chris fix in the making.
Great stuff
Good video. Thank you.
Well done sir
Sick video bro👌
Thank you !!!
Good job on the video, very well explained, and great job with the camera. If I may leave my 2 cents, I would just highly suggest to always recommend to replace the water pump in this process, and also use the recommended antifreeze for these engines.
@hardcore4476
10 ай бұрын
Yeah I seen that green antifreeze too. Who knows how much calcium etc deposits it’s creating with the aluminum block.
Kazi safi 👌🏾
What's the pipe next to the idler pulley for?
That green coolant probably not doing well for component’s and aluminum engine block.. The Pink is the only thing that should be in there. G3 or G4 or equivalent.. How many miles on this car?
❤😊
The engine mount bracket is the only "difficult"point on this job. Must to pull up the engine,limit up ,with a jack under the engine.
@optiAero
2 жыл бұрын
How does this not damage ball joint, transmission etc?
@hardcore4476
10 ай бұрын
@@optiAeroYou don’t move it too much. Just make sure to have a board or 2x4 dispersing the weight so you don’t crack oil pan.
Itakua applicable probox😁😁😁?
Never reuse the stretch bolts that hold the engine mount to the motor they sheer off and snap if fresh ones not used
@VehicleSensation
Жыл бұрын
True
@francoisloriot2674
8 ай бұрын
the 6 crank pulley bolts are 'torque to yield', but not sure about the engine mount bolts
What's the scan tool do you use for this?
@VehicleSensation
2 жыл бұрын
I used Torque Pro app... with a bluetooth OBD II scanner.
I'm keen to try this but also think it would be better to just pay someone todo it 🤔
@hardcore4476
10 ай бұрын
700$-1,200 for the job.
Do job would be a pretty easy straight forward if it weren’t for engine parts being in the way
What is the difference between BWA and BPY?
@ucefkh
Жыл бұрын
BWA and AXX Europe spec and BPY is US spec which has very little differences
Do you guys drive these cars through muddy puddle of water...so dirty engine block and bay...
@VehicleSensation
2 жыл бұрын
I live 1km off-tarmac so its to be expected
why on earth would you not replace the water pump?? shocking!!!!
@VehicleSensation
Жыл бұрын
Coz If it ain't broke, Don't fix it😂 But then I replaced it a month later while replacing a leaky camshaft seal.
14.38 😂😂😂😂
@warambahmaxwell1031
2 жыл бұрын
Where is your garage lacated
Why on earth wudnt you change the water pump 🤦♂️
@VehicleSensation
Жыл бұрын
Because if it ain't broke, don't fix it
@sonicboom4053
Жыл бұрын
@@VehicleSensation That statement would be true if it was replaced easily doing all that work again to replace if it goes bad.
@VehicleSensation
Жыл бұрын
A month later the rear main seal of the camshaft started leaking oil... so i had to do the whole process again to fix that. I changed the water pump as well.
@sonicboom4053
Жыл бұрын
@@VehicleSensation👍🏾when you buy a kit with waterpump it normally is cheaper than buying kit and water pump separately. But atleast it’s changed now