Thanks! just bought the cordless 390, your video gets right to the point easy to understand and short great job!

Solid tips! We have a bit of a different application, as we are going to be painting our school bus with that same Greco! Your explanation was exactly what we needed to feel confident with the machine. Thanks so much! - Brian + Erin

@MattFreytag

4 жыл бұрын

BE Adventure Partners Awesome. I am thrilled I was able to help you all. I’m looking forward to seeing you paint the bus’s with the sprayer. Now I’m going to have to check out your channel and see what you all are up to. Good luck with the project!

@BEAdventurePartners

4 жыл бұрын

Matt Freytag thanks! Yeah, we’re super excited about painting it tomorrow! We’ve been masking off areas we don’t want to paint! Big job with a 40 foot bus!

Love that you’ve back rolled the walls as well! And great that you explained to people why you’re doing this ❤

@MattFreytag

Жыл бұрын

Thanks bro!

Thanks for making this great video, very simple way to explain it. I just bought my Graco 395.

@MattFreytag

3 жыл бұрын

Awesome. I wanted that model but they were out of stock and I needed it right away.

I had been using the True coat 360 but it just wasn't cutting it so we grabbed one of these bad Larry's today. Thank you for the tutorial boss!

@MattFreytag

2 жыл бұрын

That’s what’s up! I’m glad I could help.

Hi I’m working at a paint store and we sell this model. Your video has tips I didn’t know about, so I’m happy to have learn them thank you :)

@MattFreytag

3 жыл бұрын

That’s Awesome! It makes me so happy when I am able to actually help someone and they get positive info from my videos. Glad I could help. Thanks for watching.

@J-Tiger7

Жыл бұрын

Yeah I just bought one & they just said “here ya go!” Thanks for the tips.. really helps after reading the manual 👍

@MattFreytag

Жыл бұрын

Awesome 😎

Always take the tip off when flushing the line. Only have tip on when ready to spray

@MattFreytag

5 жыл бұрын

Thanks for the tip tip! No pun intended.

@Jr.7601

5 жыл бұрын

Anytime, just speeds up the process. I’ve been a painter for 14 years. Know all the ins and outs of a sprayer. We always use titan airless sprayer but I been interested in buying a graco. That’s how I came across your video. Thanks for the review.

@MattFreytag

5 жыл бұрын

Jr Is200t I definitely don’t have the experience you have. I just build houses and paint them occasionally. I wanted the 395 model but don’t think it was necessary for me to spend the extra money for what I was using it for. I spray and backroll the primer and I also spray all the trim and doors in the house. I just recently bought the pressure roller and it makes super quick work out of rolling the color on the walls. Thanks for watching the video and commenting.

@orbiebibbee977

3 жыл бұрын

I take the housing off. so simple

@MattFreytag

3 жыл бұрын

Cool. I have been doing that as well and clean.

Looking at getting a 395. This is a good upload thanks man!

@MattFreytag

5 жыл бұрын

frank jones Awesome Bro. I was wanting the 395 but they didn’t have it in stock and I did not see a need to spend the extra money for what I was doing. Feel free to fill me in on what the benefits of buying the 395 over the 390 are. Thanks

@frankjones3073

5 жыл бұрын

Matt Freytag I actually picked it up yesterday. The benefits are a slightly more powerful motor and the ability to provide constant pressure. My bud uses 390's and he says he doesnt notice any pulsing in pressure. They said its only noticeable with very short hoses.

@MattFreytag

5 жыл бұрын

frank jones Yeah that’s right. I remember the electronic part of it that provides constant pressure. I watched several videos about them but have just forgotten since then.

This was great, thanks for being so thorough and informative!

@MattFreytag

Жыл бұрын

Glad it was helpful!

Awesome tutorial!!! Really easy to follow and informative- Keep it up 🦘🦘

@MattFreytag

Жыл бұрын

Thanks

Seems like you are doing everything perfectly. That should make your new machine last a long time. Condolences on the old sprayer.

@MattFreytag

5 жыл бұрын

Thanks so much for the comment. I sure hope I am doing it right. This machine should last for a good while. I believe I will try and repair the old sprayer.

@vilsan.r.9875

4 жыл бұрын

I would recommend you to use strainer bags every time you use the sprayer, even brand new paints may have small particles that may clog the filters

@sharp_focus

3 жыл бұрын

@@vilsan.r.9875 That's why you have filters in the machine and gun's handle. You have to clean those after each use and replace them from time to time.

@MattFreytag

3 жыл бұрын

I strain the paint every time I use it. Even the filters in the gun get clogged and reduce the pressure I am spraying. This leads to the tip getting clogged in my experience

Thank you so much for making this video. It was a lifesaver for novice like me.

@MattFreytag

Жыл бұрын

These are the comments i love to see. Im so glad i was able to help you! Thanks for watching! 😃

Thanks for info. Good video

@MattFreytag

4 жыл бұрын

THANKS! So glad I was able to help!

Thanks for this. Just bought one of these over the winter (my first pump) and still have to set it up. You saved me hours. Much appreciated.

@MattFreytag

5 жыл бұрын

James Crinnion That’s awesome to hear 👂. I really enjoy when I am able to help someone with my videos. I just bought the Graco pressure roller and extensions. I will be doing a video on it as soon as I start to paint my custom home. Should be pretty soon. Thanks for the view and the comment.

Thank you , i think this is good enough for start

@MattFreytag

3 жыл бұрын

Pawel Sulej Great I’m glad my video helped. Thanks for watching

Thànkyou for sharing man

@MattFreytag

4 жыл бұрын

Jessie Martinez Thanks for watching!

Good job 👍

@MattFreytag

3 жыл бұрын

Thanks

I'm in the process of starting a painting business and using a cheap spray rig currently, but looking into the 390 pc sprayer. Hopefully you do another video using this sprayer!

@MattFreytag

4 жыл бұрын

Rowdy Broomstick Cool and good luck! I do need to do another video with it. I also need to feature the Graco Pressure Roller that I purchased and used to paint my own house.

@rowdybroomstick1216

4 жыл бұрын

Here we go! Sherwin Williams doing the blue bucket sale! 699, going to go for it and get one!

@MattFreytag

4 жыл бұрын

Rowdy Broomstick 🧹. That’s awesome 👏. You will love it. Won’t be long till I do the video featuring the pressure roller.

@jessiemartinez9441

4 жыл бұрын

I bought mine last year 390 .man it been a blessing to me man

@kirkdunn1379

3 жыл бұрын

If all you do is one trade buy absolute best you can afford....I only spray few times a year but if I did it everyday.....I would be buying a top machine

I always use mineral spirits to clean the factory oils in the pump before using. They pack it with oil to protect from rusting.

@MattFreytag

5 жыл бұрын

Thank you Kevin for the positive comment and advice on the Graco spray gun. I really appreciate your view and information. 😃

Subscribed! .... I kinda bought it and had no idea what to do 😂 thanks for the help

@MattFreytag

2 жыл бұрын

Awesome. Glad my video helped. Good luck with it! Thanks for watching.

Its always a good idea to back roll even more finish coats such as ceiling flat as if you need to touch it up as a spray finish leaves it to fine.

@MattFreytag

5 жыл бұрын

Thanks for the comment. Great tip.

@richardgorham2448

5 жыл бұрын

Would I have to do that with a fence? I just brought one and looking to use next week.

@MattFreytag

5 жыл бұрын

Richard Gorham I really can’t say. I have never sprayed a fence. I would not think you would have to with a fence but you probably would want to buy one of the green fine finish tips. They produce less overspray at lower pressures.

Hey Matt! Great instructions! Can you do more?

@MattFreytag

3 жыл бұрын

Cool thanks. I will try and do another video when I spray the current house I’m building. Anything you want me to include just let me know.

Bought one years ago. Used it maybe 3 times. 😂😂 One thing I’ve learned. These sprayers are best for new construction unless you get the homeowner to empty out their home to prevent “spray mist” from floating on furniture. (Even when covering and shielding.)

@MattFreytag

4 жыл бұрын

Thomas Kalinoski I would agree with that. I also have the Graco Pressure Roller. Not sure if you have used one or not but I really like it if you are painting a bunch of the same color. Thanks for the comment.

@pnwatv5094

3 жыл бұрын

Tomas K, its all in the prep bud. 90% of my job is masking to paint, you need rosin paper on floor and drops and big box plastic over everything else and tape the ends down

@thomaskalinoski6121

3 жыл бұрын

@@pnwatv5094 Thanks for the tip Matt!

I just bought same one last year, work horse to get the job done & get on the bass, I might have to come work for free for a fishing trip.

@joeyboyle9482

3 жыл бұрын

Turn to prime with pump off & itll r easier to uncoil & rewind the hose. I wind the hose stretched out & then back towards the pump.

@MattFreytag

3 жыл бұрын

@@joeyboyle9482 ok cool I will try that next time I use it.

@MattFreytag

3 жыл бұрын

Yes I do like it. Wish I would have bought the 395 to get the digital pressure control but this one works well. I’d trade fishing for work. Lol.

Hi,thank you for video. I Just bought the same sprayer and your video was very helpful! Do you think that we can use Antifreeze like alternative and cheaper protection or to use Graco Pump Armour. Regards

@MattFreytag

4 жыл бұрын

Kolyo Kolev I am sorry but I am really not sure about your question. I would say since antifreeze has some type of oil in it that it would also be effective, but I’m not sure if the antifreeze has any chemicals in it that would do harm to any internal parts inside the pump. Thanks for the comment!

@war3405

4 жыл бұрын

Thank you!

자세한 설명 감사합니다

@MattFreytag

3 жыл бұрын

Sounds Good!

Great video matt! do you need to thin the paint for this kind of sprayer? i bought one and was wondering.

@MattFreytag

2 жыл бұрын

You shouldn’t normally have to thin the paint to spray in the sprayer unless you are using a really fine tip or if it’s one of the less powerful models and it’s not spraying a good pattern. If you were to thin it I would start out with small amounts and mix well.

@khimguillermo1168

2 жыл бұрын

This model of airless has enough pressure to pump the paint, so no need to thin, just mix well and it’s ready to use.

Good job ❤️🌆🙏

@MattFreytag

5 ай бұрын

Thank you very much!

Mine came with some kind of oil in the filter do I leave the oil in it, or very mine yiu just mentioned it thanks

@MattFreytag

9 күн бұрын

Yeah there’s instructionshow to get it out.

Nice

@MattFreytag

3 жыл бұрын

Thanks

Thank you😊

@MattFreytag

Жыл бұрын

You're welcome 😊

Do you have to run water every time before starting or just the first time to run factory oil out? TIA

@MattFreytag

Жыл бұрын

Before starting yes! I also run water through it every time I clean it and when storing it needs to have some thing ran through it with some lubricant in it such as the Graco pump armor or paint thinner.

What fluid is used to clean the machine after spraying oil paint? Is pumping thinner through safe for the machine?

@MattFreytag

Жыл бұрын

I’d say paint thinner. I have never used oil thru this machine. I only use latex. Sorry I couldn’t help.

Hey my friend I’m buying a good sprayer but I don’t know if the 395 or the 390 I’d like you give me an advise

@MattFreytag

5 ай бұрын

I would have gotten the 395 if it was available. But i needed it immediately

Fyi- so the instructions say to clean the pump for the very first time with mineral spirits to remove the factory oils, then with water after. Dont know how much it actually matters but thats what the directions say.

@MattFreytag

3 жыл бұрын

Thanks for the info. I have also heard from many painters that it’s good to run some paint thinner or mineral spirits thru the pump before storage instead of storing with water remnants in the pump. I would think this would keep it from rusting or seizing up and prob do the same thing the Graco pump armor would do.

Hi! What happend to old Graco sprayer? How long did it last?

@MattFreytag

5 жыл бұрын

I can't remember exactly how long I have had it but prob 8 -10 years. I only used it on occasion but prob sprayed over 100 gallons thru it. It still runs but does not suck the paint into it anymore. I was gonna work on it but haven't gotten around to it yet.

@dustinedmiston8165

4 жыл бұрын

Matt Freytag it prob just needs to be re packed. It’s fairly cheap!

I think a 18" roller could do a faster job considering the clean up time for the machine etc.

@MattFreytag

2 жыл бұрын

Your probably right!

@synthesaurus

2 жыл бұрын

@@MattFreytag Good video about the sprayer. I am considering to buy it. I have G19 right now and for larger jobs it is too small. How do you like your 390 PC PC far?

@MattFreytag

2 жыл бұрын

@@synthesaurus I like it pretty good but would prob have bought the 395 with the digital read out or whatever it’s called

@DjGalvanic

Жыл бұрын

I just bought this machine for exterior painting "mainly" however in the event I decide to paint with it indoors i'm trying to figure out why Matt used the roller after spraying? Isn't he technically doing twice the work spraying and rolling? Please let me know if it is necessary or not. Thanks!

@MattFreytag

Жыл бұрын

You don’t have to do it but I do it to get the higher quality finish. The roller helps even out the paint on the wall and create a roller stipple texture which will be easier to touch up in the future.

one tip use some vaseline on all your threads house to gun and hose to the machine and your tip gaurd and your filter on your machine paint wont stick to it its much easier to take off and clean aswell

@MattFreytag

Жыл бұрын

Nice tip. Thanks.

Maybe on the old sprayer just the pump failed (which I believe are easily replaceable). The new one is nice though. Looks like a quality machine.

@MattFreytag

5 жыл бұрын

You may be right! I haven't had a chance to investigate it yet. It was a model from Home Depot. Im not sure if it is even the same type pump as the new Pro model I bought. Im sure I will make a video if I repair the old one. Thanks for the comment

@Sovereign_Citizen_LEO

5 жыл бұрын

@@MattFreytag - I think the new one is worth owning. Simply being a homeowner though for occasional (rare) use (and being housepoor :), I can't afford it or justify the expense (even though it was in my top 3 finalists after lots of research). The new model pump is better. And you can by aftermarket versions of it for pretty cheap (less than a $100 on Amazon, and eBay). One (or more) of these may actually be the OEM pump since I believe some of the components are made overseas (China). Like everything else, if it's assembled in America (some DeWalt tools for instance), they can say "Made In America". Which is one reason I voted for Trump (not that he alone can make a huge difference).

@darrenbeckman6089

4 жыл бұрын

Don't do replacement pump on cheap model it's essentially throw away sprayer once its done pumping hence 300 dollars as it's diy

@kirkdunn1379

3 жыл бұрын

Nah, the cheap graco isn't rebuildable...I tried....its a throwaway

Way you guys 👦 ❤️ do this back rolling ? For what ? structure like old leather army 80s solders boots ? I can do this with graco gx21 fflp514 with poll stick 39" , and Flugger flutex 5s paint or Flugger 5 acrylic

@MattFreytag

Жыл бұрын

Ok sounds good. Makes a higher quality even finish. I bet if you just sprayed it with no back roll it would look like tiger stripes when the light hit it.

@diyidea3031

Жыл бұрын

@Matt Freytag tiger stripes - no , its depends how good you was sand it , and how good yours tips fan is set ? but in my job alway do mad skim coat , and use primer to make some walls . never have tige4 straps, and always have apelsin skin without back rolling. 2 stairs house walls and ceallings total painting in half day , covering not including

@MattFreytag

Жыл бұрын

@@diyidea3031 ok bro. You do you. I keep doing it this way.

Hi Matt, when you say you turn your tip back, what is it for ? Is it for saving the tip ? And that way you dont have to take it out for saving your tip ? Thanks for your help !

@MattFreytag

4 жыл бұрын

Steve Beaulieu. Actually the process I did at the beginning of running the water and paint through the gun should have been done with the tip removed. The material would have went thru faster and you would avoid and unnecessary wear on the tip. They do wear out from the paint acting like an abrasive and blowing out the inside of the tip making it spray differently than intended. As for turning the tip around! The reasoning for this is to blow out any trash or debris to unclog the tip then spin it back around to continue painting. Hopefully this answered your question. Thanks for the comment and for watching the vide.

@stevebeaulieu2617

4 жыл бұрын

Thanks a lot Matt :)

Do you have to roll the paint to after spraying or just the primer?

@MattFreytag

24 күн бұрын

You don’t have to roll at all depending on the quality finish you want. The sprayer doesn’t typically spray a perfectly even coat so the roller helps even out the coat and add a slight roller stipple texture to make it easier to touch up later. Thanks.

@iq6840

24 күн бұрын

@@MattFreytag thanks man

Do 390 have a transducer in them I messed up cause it was covered in paint when I bought the part and watched the 395 transducer I realized that was a different sprayer can you help.

@MattFreytag

4 жыл бұрын

patrick quinlan I am sorry but I am not sure what a transducer is or if my sprayer has one. Thanks for the comment. I wish I could better help you.

@patrickquinlan5632

4 жыл бұрын

How do you replace pressure control valve do you have a video on that

@patrickquinlan5632

4 жыл бұрын

How do you take off the pressure adjuster

@MattFreytag

4 жыл бұрын

I’m really not sure I haven’t had to do any maintenance on it yet.

hey there slim it's called P.P.E. which stands for Personal Protective Equipment

@MattFreytag

3 жыл бұрын

Thanks. Never. Heard of it. Hope you liked the video.

@uncletoy774

3 жыл бұрын

@@MattFreytag it's a military title I'm prior service SGT US Army 5 yrs active 2 yrs reserve

@MattFreytag

3 жыл бұрын

@@uncletoy774 Thanks for the the info. That’s good to know. Also thanks for your service!

How long did that X5 last for yah?

@MattFreytag

Жыл бұрын

Prob at least 100 gallons but it’s not an x5

Wow a painter does pole sanding final coat! I thought only mud guys do that?

@MattFreytag

4 жыл бұрын

H B I’m no professional painter but to pole sand between coats definitely equals better finish.

Do you run thinner threw the pump after cleaning?

@MattFreytag

3 жыл бұрын

gooch47856 Good question! I only spray latex water based paints through this spray rig so no I don’t use thinner on it. I only use water and properly oil the piston. Thanks for the comment.

@WarrenPaintingLLC

3 жыл бұрын

Wow talk about a speedy response! I just bought the same pump. Only reason I ask is because I have had a couple painters tell me that letting water sit in the pump can corrode the inside of the pump.

@MattFreytag

3 жыл бұрын

gooch47856 Yes I believe you are right. Graco makes a product called pump armor you can use for storage but I have heard of running some thinner through it to keep everything lubricated. I have not done so yet but I’m glad you mentioned it.

Than bro

Why did you roll after spraying?

@MattFreytag

3 жыл бұрын

It’s just what you do!

Czemu używasz wałka po natrysku farby?

@MattFreytag

Жыл бұрын

It helps to even out the paint on wall and create a roller texture that is easier to touch up later.

Hello. I am from Algeria and I want to know how many cubic meters this machine does in 8 hours

@MattFreytag

4 жыл бұрын

Behih Sidahmed I am sorry but I do not know that information. Maybe you could look on the Graco website and find that out. Thanks.

@ebenezerENlosangeles

4 жыл бұрын

390 395 models spray .54 gallons per minute a gallon of paint woul cover average on 320 to 340 sq feet I'm not saying this are the perfect numbers because it also depends on the size of tip you are using but you can do the number with this info I hope Cheers from North Hollywood California

@MattFreytag

4 жыл бұрын

ebenezerENlosangeles Thanks for the info!

Which tip is that?

@MattFreytag

2 жыл бұрын

It is the Rac X 515 tip. That’s what I use to spray and backroll primer.

I got me a 390 pc and honestly I regret it not because it whas a bad machine It did more that a little pony should do but I end up buying a 490pc with in a year a litle more money but it has a 1 hp and a better pressure control set also brushless motor and sprays more per minute all that for around $400 more the 490 you can use it on exteriors and you don't hear a little motor being over worked dont get me wrong my 390 painted a 2 storage house but like I say I know I was burning the little pony If you can extend you're buffer a little I recommend a Ultra Max 490pc Cheers from North Hollywood California

@MattFreytag

4 жыл бұрын

ebenezerENlosangeles I don’t really paint that much so I don’t see the need to spend any more cash. I painted the exterior of my house as well with this machine and it ran just fine with no problems. I do not feel it was overworked at all but I have not used any larger machine so it’s hard to give an accurate comparison. Thanks for the info.

@socialslacker

3 жыл бұрын

390s are workhorses, IF you take care of them!

How to do touch up on sprayed paint?

@MattFreytag

4 жыл бұрын

I really don’t know the answer to that question. Someone with more experience needs to answer this. My best guess would be to tape out a section so that you wouldn’t see the seams and spray the whole section.

@vilsan.r.9875

4 жыл бұрын

Good luck with that, especially low sheen or eggshell paint, you better paint the whole wall

@willmurphy6996

3 жыл бұрын

You spray. Hand helds are great for this purpose if not much touch up to do.

Can oil paints be used with that?? Or is it only water based paints..

@MattFreytag

3 жыл бұрын

Yes it can be used with oil paints. Not sure which tips you would use. I choose not to use oil with mine since the cleanup would be messy.

Do you really need to back roll primer? The new dry walls suck it up really well, right? You guarentee roller lines now. When you put your finish coat on, you roll it for texture. In my opinion, no need to backroll primer.

@MattFreytag

5 жыл бұрын

aaron anderson First off thanks for your comment and watching my video. I really can’t answer the technical question of ‘Do you really need to back roll primer’. This is just the way I have been doing it for years. I do know this. In my experience it helps even out the primer or paint that you are spraying on the wall to get better coverage since sometimes the spray pattern is not perfectly consistent depending on the spray rig, paint thickness, or your actual technique. Also it is just one more coat of rolling texture to make the dry wall and mud joints more consistent when the light is shining on them.

@GeorgiaBoi70

5 жыл бұрын

Always backroll. Always, always backroll new drywall.

@MattFreytag

5 жыл бұрын

I agree ☝️

@1painter4hire

4 жыл бұрын

Yes, Always back roll. It's a must.

@MattFreytag

4 жыл бұрын

For Sure!

I don’t understand why painters back roll , it defeats the purpose of spraying which is to be faster than rolling. As a painter that does both spray and traditional brush and roll work , if you’re planning on back rolling then opt out of using the sprayer as it will cut into your time having to prepare for use and clean the sprayer afterwards. Might as well just cut and roll . Even faster when you use the bigger rolls like 14 to 18 inch , especially if you’re just running primer on brand new drywall/sheetrock.

@MattFreytag

3 жыл бұрын

Alex Sandoval I cant speak for other painters but there are a few reasons I back roll. One reason is to even out the paint on the wall. Second it creates roller texture/stipple. This helps when touching up at the end of a build. Also I can spray and back roll a house way quicker than I can cut in and roll the walls no matter what size roller I am using. Personally I would classify backfilling as an extra step that would create a better overall finish. Those are my opinions. Thanks for the comment and for watching the video.

@alexsandoval7202

3 жыл бұрын

Matt Freytag perfectly understandable, some clients would want roller texture for sure and I suppose it does help with the touch ups in the latter parts of the job . I guess at the end of the day whatever gets the job done quicker is the way to go, in my experience it ends up being counterproductive hence why the comment in the first place . I’ve definitely seen my share of mishaps working/helping other contractors doing spray work . Thanks for the reply and good content regardless, and congratulations on the upgrade with the sprayer 👍

@MelonSplitter

2 жыл бұрын

@@alexsandoval7202 I agree with you

@staffh3815

Жыл бұрын

If u don't bankroll new sanded dry wall u are asking for trouble ,different if it's been plastered it's ok

@AR-qj7io

5 ай бұрын

I spray my first coat and back roll send And I always spray my woodwork

Yo tengo una 390 y ermosa por 9 años. Eso si linpiala cadaves de unarla

@MattFreytag

3 жыл бұрын

Thanks

Run mineral spirits through it to flush out factory oil

@MattFreytag

5 ай бұрын

Too late now! Lol 😂

@anthonybalante2221

5 ай бұрын

Ya I'm sure it's fine.

How to avoid a lot of over spray?

@MattFreytag

4 жыл бұрын

francisco ballona you just have to use drop cloths and mask everything off you don’t want paint on.

@broloading1754

3 жыл бұрын

Use a low pressure tip and mask

@MattFreytag

3 жыл бұрын

Bro I have the green low pressure tips. I still get overspray but not as much

Could you not just spray with primer and only backroll the final finish coats?

@MattFreytag

3 жыл бұрын

Yup Yes I’m sure you could do it that way but I wouldn’t. The quality of the first coat sets the basis for the quality of the preceding coats so I prefer to go ahead and backroll from the beginning

@yup3398

3 жыл бұрын

@@MattFreytag okay thank you!

@kirkdunn1379

3 жыл бұрын

This is what I do...spray PVA primer and back roll next 2 coats....works fine....primer soaks into walls pretty well so doesnt leave much texture anyway....once wall is sealed than texture starts to build up

@yup3398

3 жыл бұрын

@@kirkdunn1379 thanks mate. Would you recommend the graco 390 as a good all round machine. Mostly walls and trim using fflp?

@kirkdunn1379

3 жыл бұрын

@@yup3398 am not a painting a contractor though I do alot of painting...mostly residential....I am a GC sure its good machine but you would have to weigh out what you typically spray to find out best overall fit for you.....I use HVLP guns alot too for fine finish when overspray is an issue.....if you can only have 1 sprayer find one that covers most of what you will do

Help me Iam painter from iran I need paking for reapir graco 390 Tank you

@MattFreytag

4 жыл бұрын

You should be able to find it online?

So what’s the point you have to go over it with a roller

@MattFreytag

4 жыл бұрын

Hashooma toy fun Alfarawi It’s just what you do

@ebenezerENlosangeles

4 жыл бұрын

To achieve a more leveled coat on PVA primer wen you'll get more experience spraying w You dont need to back roll is jest primer

@MattFreytag

4 жыл бұрын

ebenezerENlosangeles I disagree with not back rolling. Not sure about where you are located but here the backroll helps even out the texture between raw Sheetrock and drywall mud on a typical finish.

Здравствуйте. А сколько стоит такая машына 395 у вас

I want to buy a genuine machine, where can I buy it?

@MattFreytag

Жыл бұрын

No sure!

The harbor freight Krause is a better machine than cheap graco HD sells.....I had that same graco and it was pos....harbor freight is still goin....but pc 390 is what am looking at next.....if I painted more would be no brainer but it comes and goes so

@MattFreytag

3 жыл бұрын

I agree. The one I got from HD did last a while but once it was done there was no fixing it. In retrospect to me buying the 390 pc I wish I would have gotten the 395 Ultra because of a few extra features but the PPG store did not have them in stock and I needed to spray a spec house immediately.

@kirkdunn1379

3 жыл бұрын

@@MattFreytag if you have 1 trade buy the very best you can....in the end you'll save money......I am a GC but just sprayed a 2 story house with harbor freight airless.....if I sprayed everyday I would buy a $1500 sprayer and have a cheap one as backup.....same as framing, plumbing, tile, etc....just having a machine quit in middle of job costs too much money/time

@MattFreytag

3 жыл бұрын

@@kirkdunn1379 I heard that. I build houses but I find my self doing 2-4 spray jobs a year

@kirkdunn1379

3 жыл бұрын

@@MattFreytag same here...probably less actually....am a GC and painting is small part of the job.....if I did more I would get nice graco or titan....hard to justify cost for me....think my Krause is on its last leg, just finished a complete exterior and it barely worked at end.....good enough, lol

where's the back stitching? Your backroll technique is gonna leave flying v's if you apply your top coat like your prime

@MattFreytag

3 жыл бұрын

Matthew Fernandez Never heard of the term back stitching nor have I ever heard anyone in the industry around here use that term.

@pnwatv5094

3 жыл бұрын

@@MattFreytag back stitching is when you roll straight up and before you get to the top roll to the move over an inch or so towards your wet edge to cover your roll marks from the roller dragging the paint up you qlwYs want your roller marks uniform all same direction not flying v's from rolling at an angle you see the up down strokes

@MattFreytag

3 жыл бұрын

Matthew Fernandez I gotcha homie.

haha why roller? XD you using spraying

@MattFreytag

3 жыл бұрын

Why not homie!

pfff, I was ready to purchase this spray and that is why I came here, everything was perfect until you got the roller on your hands. Really? I have to spend 1.500£ just to put the paint on the wall and after to use a roller? No fking way. Thank you for this video and for stopping me from do a big mistake.

I am old school roller & brush guy. I just hired a painter because i was lazy to paint interior. Know wonder why 2 coats didn't cover well. They must have used a paint gun & charge me extra for 3 coats of paint. Unfortunately, i could not be there to watch how they painted. Never ever again hire another painter they all shortcut if you're not watch them step by step.

@MattFreytag

4 жыл бұрын

H B Ok. Not really sure what you are implying here but I know plenty of honest good painters that use a spray gun and do the job right.

@HB-yq8gy

4 жыл бұрын

@@MattFreytag Not implying nothing negative. Just question the spray gun technique. Thanks you for showing me how gun works.

@MattFreytag

4 жыл бұрын

H B no problem