After 37 years of painting,I'm still learning. Apreceate you brother.

Hey brother, I just wanted to let you know that I watched your vids when I first started out. The so called "journeyman" that were teaching me weren't to keen on showing me too many tips and tricks. That was 5 years ago now and luckily had your videos to get me through. Thanks Chris, you're a true master at your craft bro. God bless

@oscarvalladares2991

2 жыл бұрын

No bullshit... real master of his craft

@oscarvalladares2991

2 жыл бұрын

And I'm an electrician but I just appreciate watching a master at his craft

@less2worryabout

2 жыл бұрын

Which one would you like to do the blessing? Thatulip

@bryantmccarty3358

2 жыл бұрын

Yeah dude thank you for real

YOU SHOULD MAKE A CHART OF ALL THE TIPS, THE PURPOSE OF THEM AND THE PSI THEY SHOULD RUN AT AND I'LL BE THE FIRST TO BUY IT!!!!!

@infinitetoolz6046

2 жыл бұрын

Or just primt it

@josezavala1622

2 жыл бұрын

12th 1

@freebehindbars8654

Жыл бұрын

Several online.

@Kitkat_deviated

Жыл бұрын

How about you do it for him?

@bostonloyalty4804

5 ай бұрын

Where…?😂

This guy has saved me tons of time and money! I love the fact that he doesn’t blab for ten minutes, before he gets on topic. He needs to paint a house for This Old House.

Thank you for making these informative videos! I’m actually a store manager at a Sherwin Williams in St. Louis, Missouri, and I send my staff your videos all the time to help train them in a fun way! We appreciate it!

@Idahopainter

5 жыл бұрын

Awesome, thanks for the support Jazmin!

@martinmartinez1572

5 жыл бұрын

Paint Life TV : you are the man 👍🏼👍🏼

@irishsavage8715

4 жыл бұрын

You are the hottest Sherwin-Williams employee I’ve ever seen.

@draftking77312

2 жыл бұрын

@@irishsavage8715 🥴

I watched this because my boss has one, and I think he wants me to learn to use it. After this, I may know more than he does about it. A lot of information in short time. Thank you sir.

I call myself a painter. I have quite a list of projects under my belt but I learn something from you every video. Thanks for sharing you knowledge

As a beginner who has just bought a paint sprayer, I have learnt a lot about the sprayer tips. Excellent video and big thanks!

I've been a painter for 17 yrs but I learned a lot from these video. Btw, I'm using Graco Xtreme x70 and the machine is a monster.

@in-n-outs867

2 жыл бұрын

Give any id for better conversation

By far the clearest video on tip sizes and uses. I've been painting for years, but I always learn something from you. Thank you brother!

Just a quick thanks - I've just finished a remodel (I've never done anything like this) I have lived by your channel for 3 months - the finished product (if I do say so) came out great - you are the best.

Painter over 25 years here. You keep me up to date on products and you have opened my eyes on the Bible. Keep on doing what you do , thank you God Bless

@Idahopainter

6 жыл бұрын

Thank you for watching & supporting Hugo!

Great video. In my 37 years of experience I found out that they are many ways to achieve a good paint job so we individually have to find the one we feel good about. Excellent video 👍🏾👍🏾

I’m an up and coming painter and these advices are amazing thank u and keep up the amazing work

I’ve been painting for years and this is the best tutorial I’ve seen… thanks!

You guys are great it's nice to see painters who actually know what there doing I just got a graco nova 390 I've been an hvlp cab guy but you just cant beat the production and new fflp tips thanks for helping me pick the best sprayer to help my business grow!

@Idahopainter

5 жыл бұрын

Thanks for the support!

Timeless knowledge Chris. You inspired me many years ago now and my channel and biz had benefitted from your example. Thanks CB.

Dude, I don't comment on videos but, you do such a great job sharing your knowledge!!... Great job!! I'm just a homeowner that likes to do my own stuff and save a dollar in the mean time... You help us do it yourselfers!!!

No problem, you help me out on my painting projects for sure. Great tips and very clear instructions. Great work and keep up the vids!! They're my go to when I need assistance.

Just purchased my first airless sprayer prox17 been on KZread searching for good information yours is the best thank you

You rock man, just love when trades people really know what their doing. Thanks so much for your videos.

@Idahopainter

4 жыл бұрын

Thank you for watching and sharing🤙

Thank you for an excellent video. It was very informative and helpful. I often screw up by doing trial and error as I did before finding your video.This has helped a ton.

Smooth operator 👍 I think the pro painters here now exactly what I'm talking about: u guys give the house painters trade a good reputation 👍. Good for u !!! And I live paint for 25 years

Seriously! thank you for all the videos. I’ll be purchasing some merch to show support and appreciation . Also thanks to journeyman John as well. I just bought a graco airless sprayer and ordered all the tips you recommended. I got my 18” roller and pan, my stiff brush for cutting in. I got my masking gun with the blade and my 20/20 tape, brown paper, red paper, scrapers , 5 in 1 tool, and the best part, seriously thanks to you i know exactly how to use them. 🤙 ready to rock.

Thank you Idaho Painter for this video. I work as a handyman/general contractor and this video really helped me to clear up what tip, and pressure, I should be running on my Graco 210es.

@Idahopainter

5 жыл бұрын

Awesome, glad to help!

@ivanrivera4657

4 жыл бұрын

What's up man. Can I ask you a question? So all those tips can I use it with my graco210es?

enjoyed the sprayer tip video !!! used our 695 today with a fflp 310 tip, using ppg pre catalyst epoxy. It was a little bit of a learning curve to dial it in. had to play with the pressure dial and thin it out with a little water. but once we got going, it laid out so smooth.. we are semi new to spraying and adapting to different product and different applications. VIDEOS LIKE THIS ARE SO HELPFUL. THANK YOU VERY MUCH

@Idahopainter

5 жыл бұрын

Glad you find them helpful, thanks for watching & supporting James!

I been painting for a long time and I love watching this videos. Still learn some tips. Thank you so much for putting the time to make this videos.

@Idahopainter

5 жыл бұрын

Thank you for sharing🤙

I am not a professional painter by any stretch of the imagination. I'm just a man that needs to paint his house to keep my neighbors and the city off my back. Your tutorials have been an invaluable tool for me so Thank You!

Great vid, showed this to my crew today. One more tip related idea: Each size tip has a GPM rating that should be considered in relation to the pump being used. For instance, using a 321 tip requires a pump that can push better than .47 GPM. We spray thick materials (intumescent paint) and usually use 325 tips so the pumps we use are pretty stout.

@Idahopainter

7 жыл бұрын

Yes, thank you for sharing

Dude you’re amazing person. I really appreciate all your hard work and the effort you put into making the bada$$ videos

@jerryhedrick

3 жыл бұрын

Sorry, just saw this....thanks so much

@pierrelaurinp4332

3 жыл бұрын

Je vais attendre le 9

Numbers 6:24-26 God has truly blessed you. Ive painted over 30 years and have gained a great deal of insight from your videos. Keep up the great work. Your tutorials on sprayers have helped me immensely. There is safety in the multitude of counselors. God bless you

Beginner sprayer here. Purchased a Graco x5 strictly for diy and home reno projects. I have some interior doors that new and primed from the lumber yard. I heard you say at 6:45 you use 510 tip for interior doors but on the video screen it says 310 for doors and gutters. I'll be spraying the doors in my garage. My fiance and I did a complete house renovation and had all new sheetrock and primed and painted the entire house. We had it trimmed and filled all the nail holes and caulked ourselves. Everyone asks who we hired to paint and can't believe we did it ourselves. Wouldn't have been possible without your channel. Thank you

I liked the Joshua 1:9 verse inserted in the video. Happens to be my favorite verse. Synchronicities are always interesting. :) Great info/video as well!

Dude you are definitely best pro painter teacher ever. You bang🤘😎

@Idahopainter

6 жыл бұрын

Thank you!

I just purchased a Graco magnum LTS 17 and these videos have been an awesome help!!

Just bought my first airless sprayer. A graco x5 magnum. And I should have bought one much sooner. I'm not a painter but I have a maintenance company which I do all types of service. Well just tested it out on my dinning room came with a 515 tip and the first time using a sprayer. Set up to break down and clean took me 45 min total. This includes prep time. My wife was amazed at how fast it was. Now she wants the rest of the house painted. I Going to purchase the trim tip since this house has more trim then a boat. Hope it makes it easier. Thanks for the video. I enjoy watching. I also just subscribed to your channel for further painting tips.

Thank you so much for taking the time to make this videos, very helpful, many blessings to you

@Idahopainter

6 жыл бұрын

You are welcome!

You did a fantastic job on this video.

@Idahopainter

7 жыл бұрын

Thank you John!

Great information for someone who is completely new to painting with an airless sprayer.

Great video! The title matched the content and your explanations and demo’s were spot on. 👍🏼

This guy knows alot , thanks for blessing us with your knowledge

@Idahopainter

6 жыл бұрын

Thanks for the support!

Awesome help Chris, Thank you. I just picked up a Graco 490 and painted a textured ceiling with the blue 517 Rac X tip it came with. Turned out great. I will get a 619 also for the walls but I assume the 517 may work as well, right? as well as the 619 on textured ceilings? Thank you for your videos!

@in-n-outs867

2 жыл бұрын

You are painter?

Tis is super helpful,Chris, we appreciate everything you do for us in the paint world, excellent video man

Thank you for all the advice and information man. You are hands down the best painter informational channel on KZread ive ran across

@Idahopainter

5 жыл бұрын

Thank you for sharing and being with us!🤙

Thank you for the tip tips.

@Idahopainter

7 жыл бұрын

You are welcome!

@tomaszorzelowski7624

4 жыл бұрын

@@Idahopainter what tip im can use for beer latex paint semigloos plese help me im will be spray cobinets thank you

Good information, thank you. ASM is a division of Graco, there tips and base guards should interchange w most Graco guns and are 5 or more dollars less than Graco brand. Also I noticed the tip that seems to come w all the guns is .517, popular but may be to heavy compared to the ._15 tip?

Thank u so much for this priceless info, I recently started using that same sprayer that I received as a gift, all I was using was the tip it came with. This video u put it is a tremendous help,this rip size and out put ,thank u again.

@patriotjames1076

3 жыл бұрын

The orafeses start to expand the more gallons you pump threw also. If your doing a lot of work....you may go threw more then one. Love the fact that as long as you keep pulling that trigger$$$$$$

This guy is awesome, and knows his stuff. Seems like a great dude to work for

This video is very informative! I just picked up a Graco X7. Recently un-boxed it. I'm going to spend some serious time on your channel learning before I get spraying. Need to look into purchasing different tips and an gun extension. My first project is a deck, and then a fence. Any input/direction would be appreciated. In the meantime I'll be searching through your channel. Thank you so much for your contribution. You rock man!!!

@Idahopainter

7 жыл бұрын

Thanks for watching & supporting, glad to help!

@davewenners6722

5 жыл бұрын

I would seriously watch other painters spraying. This guy doesn't do it right. Biggest hack out there.

First time using airless painter and must say it turned out very well thanks to your instructional videos. You videos are a great help..... Glad I taped and masked everything because the over spray was pretty bad. I was using a 515 tip.... Any suggestions that would help with the over spray.... Thanks again...I was working on interior walls...

@Idahopainter

6 жыл бұрын

Glad to help, thanks for watching!

@davewenners6722

5 жыл бұрын

Use a 415 or 315 tip instead. 515 is to big.

The best video on the topic of tip sizes out there. Great job!

Absolutely badass man, I just obtained a 5/8 HP Krause & Becker Airless Sprayer unit model 20600 from my uncle and as a professional painter for the last 32 years using primarily spray cans I feel as if the space time continuum has reversed direction, well maybe not that, anyway, I really appreciate your tuition and your skills are quite impressive, thank you.

415 is the best all around tip if your looking for one that does everything ok

@Idahopainter

6 жыл бұрын

Yes!

@daffydill5807

6 жыл бұрын

Little Gamerz HD what about a 315 tip

That was awesome.

@Idahopainter

7 жыл бұрын

Thank you!

You are great teacher and professional! So much knowledge and so many details!

I love your videos! I started working as a painter in September of last year and started learning about airless sprayers. you are my go-to instructor/teacher when I wanna learn more about paint.

@Idahopainter

Ай бұрын

That is awesome!

Beautiful objective demonstration of Tips! It's so good, that I think I would like you to spend more time making another 2 or 3 videos on them, because it just seems like you have a lot more you want to say :)

@Idahopainter

7 жыл бұрын

lol, yes there is a lot to say! Thank you for watching :)

@RISE-DPAC

4 жыл бұрын

I’m new to airless spraying am using Ben Moore Advance. I was told because it is thick to use at least 515 however I’m spraying chairs and a bookcase. When I looked at the BM Tech sheet it says this Fluid Pressure - 1,500 - 2,500 PSI; Tip - .011 - .015 Orifice Does that mean I can use basically anything in that range like 311-515? Would I need to thin it?

I think I'm a decent painter until I watch Real professionals. I hope one day to be as confident and professional as these guys are.

@builderspluscustomhomesand2146

4 жыл бұрын

If you are decent, you are a professional. Surely by now you are killin the game ;-)

@justg00ch

4 жыл бұрын

A year has passed, you're a year better now mane

After watching this instead of paying a painter 2500 to paint my house I bought a grayco magnum project sprayer and imma tackle it this week. Watched a bunch of your videos. Such a help

@Idahopainter

2 жыл бұрын

Wish you luck

Man you have helped me so much on questions I have you been a hell of a coach

(pun intended) *A LOT OF GREAT TIPS IN THIS VIDEO*

@billydarley6925

4 жыл бұрын

ive seen you recently. New Zealand right?

@Omastian

4 жыл бұрын

For real.

@carlcox7332

4 жыл бұрын

Just the tip tho

@manmonchill

4 жыл бұрын

Lmao

thanks for your great videos and for sharing those bible verses they are both inspiring

@Idahopainter

7 жыл бұрын

You are welcome!

@keelingwallace5

6 жыл бұрын

Painting old cabinets

Thank you so much!! Wow! I’m not that experienced on using spray guns and now I know the best way to start.

Your video is awesome. You cleared up alot of the questions that anyone should know before using a sprayer. Thanks 👍

When did John Cena start painting?

@clo289

3 жыл бұрын

I have no idea what you're talking about. I dont see anybody?

Waiting for him to paint something. Id like to know how much of a mess this would make in my house😒😒

@irishsavage8715

4 жыл бұрын

Not for amateurs, call a pro or hand paint it (brushes and rollers)

Hello, Chris thank you and God bless you for giving all this information to the public it's really appreciated.

I wish my boss listened to my today. I've spray 200 gallons out of a graco 517 blue tip 200+ gallons and can tell my orfal is almost a 521. I spray metal roofs and very disappointed with my finish because he didn't wanna replace my tip after i told him im wasting 10 gallons and having heavy overlays and and i hear its blown and and and the over spray is noticable. Thank you for teaching a 5 years sprayer how to be a perfectionist with pride in their work.

I wish I lived in Idaho! I want to learn from you. And a good ol'boss that believes in the gospel of jesus😎😀

first

@XCPainter

7 жыл бұрын

Sid Meloche 14th!

@Idahopainter

7 жыл бұрын

You are awesome!

ur videos are very help full.I actually take notes on most ur stuff. thanks for making this! 👍

Awesome video , love how well you explain everything. Very informative and entertaining. Thank you 👍🏻

@Omastian

4 жыл бұрын

The man is definitely a good teacher.

I love the FFLP tips. Glad you mentioned them.

@Idahopainter

6 жыл бұрын

Mostly what I use! Thanks for watching!

I just bougth a Crago X7 sprayer and used it for the first time two days ago, I love it! Sparrying primer on walls and ceilings. Next spring i'll be spraying the exterior of a house. Thanks for explaining the tips!

@christianrosales2014

2 жыл бұрын

I really hope you don’t paint for a living because those are only made for home owners.

Very informative. Thank you for this. I will be able to get more projects done with the tips/ends and pressure tutorials.

Thanks bro been using ur advice for 2 years a lot of people don't know wat there doing they think they do

i've watched a lot of your videos and they've given me a ton of knowledge. thank you

@Idahopainter

6 жыл бұрын

Thanks for watching!

Your videos are on point Sir! Thank you for sharing your years of experience & knowledge.

I'm new to spraying and this was so helpful!!! Thank you.

Thanks for the sensible advice from a fellow painter in the Netherlands.

@Idahopainter

7 жыл бұрын

You are welcome!

Just found your channel a few days ago. Great content. Thanks for putting out these vids.

Great video. Just bought my furstcpaint sprayer and this video has helped so much! Thank you.

Excellent video. I hate getting Re. Addicted to your videos. Can’t stop watching em.

Excellent video! It nice to see a Master painter share knowledge to others

Thanks so much for the video. Just watched it in Home Depot 😆. Helped me a ton!

Thanks for the videos I found them very helpful. Tomorrow is my first day with my Graco X5. It's also my first time spraying ever. Wish me luck.

Great video. Thanks for passing along you knowledge

Cool, thanks man. A great vid as always. Great to see all of these tips demonstrated.

@Idahopainter

7 жыл бұрын

Thanks for watching!

Super informative video. Great work, love all that info.

Great information and the birds liked it too

Every one of your videos makes me want to get back in the game

thx Chris this is exactly what ive been waiting for. im new to airless spraying and have been having issues since im am used to hvlp spraying.

@Idahopainter

7 жыл бұрын

Thanks for watching!

I am certified instructor for SSPC C7 C12...this video is amazing...

Thanks man, this answered all my questions!

Awesome video. Very nice of you to put it up.

Thanks for the info. Great video well explained .

Outstanding video. I am a homeowner that has brushed, used pads, and rolled my cedar shingle home since 1975 when I first purchased it. The home has grown as our family did, and I have painted the interior and exterior many times since. Starting back on the South side of the house and had to really put some effort into cleaning and resecuring the cedar shingles, and primer cutting under the overlap where the roller would not get up into. In getting ready for this, I broke down and purchased the Graco Dewalt battery operated sprayer, yet had very little knowledge of basic hardware or fan and tip relationships. Thus I brushed and rolled the primer over the past weekend. Yes, I was quite ignorant and hesitant to jump into something that I knew needed insight and education. I have had my own small business for 30 years and excel at what I do, but I sure needed schooling for this. I just spent 2 hours tonight following you and your videos specifically on the Graco unit, where you used it on the garage outside, and the doors in the restaurant. I appreciate your candor regarding how you adapted to the changes in pattern and your discovery regarding the settings where you turned back to 5 where before you suggested 7 or more, and did not get the paint stratification with the lower setting. Man did you educate me on your tip number relationship with respect to fan width, orafice size and material (surface) to be applied to. Kept pausing and taking notes and filled out a legal pad. As with any profession such as this, experience is key, that I understand. However you have absolutely put me on the right track and your teaching was awesome. I respect the tool now, and am not intimidated by it. I subscribed to your KZread channel, and wanted to say Thanks for sharing your gift. My grandfather back in the 30s and 40s had his own painting business and perhaps he will see me do things a bit smarter now. Thanks for opening that horizon for me, during a Friday night well spent perusing your channel. I watched you taping / covering windows earlier this week. Your product introductions are very insightful. I will visit your store very soon. I need to get tips as this Graco only came with the green 310 and I need the 515 for my outside work. Thanks! Harry

Someone is Always Gonna be Painting - Great Information!! I appreciate the fact that you aren't some sales guy behind a desk doing a "demo" - Needed to know the answer to the biggest question - Are Tips interchangeable? YES as long as the is married/connected to a matching guard. The guard holds the tip and the guards are "universal" because they connect to the Gun or Extension with an industry wide accepted 7/8" connector threading. With an exception of the Wagner F Guard with an 11/16" - Thanks the work!!!

Chris this is awesome been awhile since I’ve commented but this has been very helpful doing wood working projects and looking to speed up my finishing and painting thanks a lot for the good info you always be teaching me

@Idahopainter

Жыл бұрын

Glad to help Jeremey

YOU ARE A GOOD TEACHER.......YOURE REALLY A PRO...........THANKS