How to clean your Airless Paint Sprayer
Тәжірибелік нұсқаулар және стиль
Graco 390 - www.spraydirect.co.uk/acatalo...
Pump Armour - www.spraydirect.co.uk/acatalo...
Overalls - www.spraydirect.co.uk/acatalo...
Mask - www.spraydirect.co.uk/acatalo...
Hi Everyone,
We hope you have enjoyed this video, make sure you subscribe to keep up to date with everything in the spray world!
Please comment any questions you have and let us know what other videos you would like to see.
www.spraydirect.co.uk/
Пікірлер: 99
After fully cleaning the airless pump I'll also put the housing and tip back on and blow them out with the clean water. Perfectly clean for the next time as well. Nice video for sure!
Extremely helpful for the people who is the first time using airless sprayer. Other video also helping to solve the priming issue after the sprayer has been sitting for a certain period. WONDERFUL INSTRUCTION !!!!!!!
@SprayDirect
2 жыл бұрын
Thank you so much for the feedback 👍
The liquid in the pump is actually the lubrication for the pump plunger seals. Running the pump dry, is not healthy for the pump. Also, warm water greatly aids in flushing the pump, hoses and gun.
Amazing Just the instructions I was looking for - No waste
Simple instructions on how to clean my Graco. You're a good teacher. Thank you.
@SprayDirect
3 жыл бұрын
Glad it was helpful!
Thank you for your time and the detailed steps on how to clean an airless paint sprayer. Very good video all around! Content, audio, and video. will definitely subscribe!
Just the video I needed! Thanks!
Incredibly thorough.
@SprayDirect
3 жыл бұрын
Thank you!!
Wow I like it and all you did is clear and understandable
Great videos. Thank you!
Thanks for this video much appreciated 👍👍👍
Saved me a lot of trial and error, thank you
Great video Lot of good details
This is the best video for cleaning. Thanks brother!
@SprayDirect
3 жыл бұрын
Glad it was helpful!
@edersagarnaga8841
3 жыл бұрын
Hi is that the way you clean the Graco 210 ES Machine like the way your cleaning it...
Allways helpful
Great video dude. Easy to follow
@SprayDirect
3 жыл бұрын
Glad you liked it!
Hi there, great video thanks, so what else would you need to do if you wanted to undo and remove the hose for storage purposes do you need to cap off the outlet to prevent the pump armour draining out or has that been isolated due to the sprayer being in prime mode ? thanks very much cheers Tony
You forgot to turn the switch to the spray position when you finished with the pump armor…. So it will stay on the system. Nice video though. Thanks
Good job man. 👍👍
Thank you very helpful video excelente job Master
i just purchased this airless sprayer because I did not want to spend money on a toy. Real tools work for me. I know nothing about airless sprayers, nothing. I did like this video and I hope that after I am familiar with this machines idiosyncrasies I will be able to use this machine without too much hassle. All and all looks like a certified PIA to get this equipment ready to paint and clean. I need three bucket and more tips
You’re the best airless sprayer teacher I’ve found so far. Bookmarked all your vids. Thanks for the detailed tutorials!
Nice1 josh very helpful. Les.
Very helpful 👌
Thank you for your time
Can you do a review video on the 390 classic spray unit you are using in this video please.
Thanks Brother!
Good job buddy!!!
@SprayDirect
3 жыл бұрын
Thanks!!
Very helpful thank you very much. Do you have any trouble shooting videos for airless sprayers please?
Champion!
You do awesome videos
@SprayDirect
3 жыл бұрын
Thanks, I really appreciate it 😀
Thank you so much
What about the water in the hose & gun? I’ve seen instructions to “drain your hose” but don’t understand how to do that 😅 Just hold down the trigger after it’s off to release any pressure?
If you use it for water based paint and then you want to spray clear varnish how do you clean it? With acetone, mineral spirits, lacquer thinner, or paint thinner???
Hi Josh Ive just invested in a Graco GX21DF Direct Feed from you - if you could do videos on Initial set up / Operation / Cleaning that would be really helpful as I cant find any just for that model. TIA Mark
does this include with other makes like wagner ect
What liquid can be added to the pump area?
So if I'm not using pump armor should I just leave it loaded with water? I plan on using it tomorrow.
What do you clean one the kids used and didn’t clean . Paint is dry on it .
Hi, I have a Graco x21 and when starting the filling process most of the times need to fill watter in the system other wise it does not suck the paint. is that usual?
What do I do with the "gray" water? Pour it down a household drain?
Thanks, best how to clean The machine and gun video. The ser up vídeo is also very useful
@SprayDirect
4 жыл бұрын
Thank you! Really appreciate it. Make sure to subscribe, new video dropping tomorrow morning!!
Always flush again after cleaning filters. Thinner is better for storage for more than a month.
On the newer Graco machines don't they have "FastFlush High-Flow Cleaning System"? Any chance you could do a video on this? Thanks!
@gracechu3549
3 жыл бұрын
Door molding`
@EKDannyH2B
3 жыл бұрын
Yes I'd like to see a video also?
Hi, using solvent-based primer with a 290pc graco, is cleaning with nitro-type diluent sufficient for cleaning or is it recommended to wash with water before storing the pump?
@threepointservices-tractor4832
2 жыл бұрын
Water is actually an enemy of the spray pump. The interior portion of the pump shaft is carbon steel, and water will cause pitting in the pump shaft, if it sits unused for a period of time. I spray with epoxy coating systems, and clean up with petroleum based solvent. No need to follow up with water.
I'm new to spraying. What's the best method for flushing solvent and shellac based paints?
@SprayDirect
3 жыл бұрын
Use the same process but instead of water use an appropriate gunwash/solvent. 👍
Hi What is difference between Pump armour and Antifreeze? Do you think that I can use and if not why? Thank you
@lexandersantana8089
3 жыл бұрын
Pump armor is one ingredient, the exact same ingredient in antifreeze
So you leave the pump armor in the machine? Last video you cleaned it out again
I just bought a used paint sprayer. Last guy didn't clean it so dried paint inside it. Will this method clean it?
If you don't have any pump primer can you use a soapy water as a pump primer
@petef7323
2 жыл бұрын
Don't think soapy water has the same protection properties eg lubrication and antifreeze.
After flushing out water, can we leave the sprayer dry (without pump armor solution) to be used again in a few days?
@gbrhoades
2 жыл бұрын
Use rv antifreeze (Cheaper)
Does this apply to most airless sprayers?
What exactly will the pump armour do?
@SprayDirect
4 жыл бұрын
naveed khan the pump armour is a lubricant and anti-freeze solution. When used it helps prevent corrosion and helps prevent joints bursting due to freezing when being stored over winter.
It’s a good idea to leave clean water in the line for about 15 minutes before flushing out the water.
I use 5 gallons of Dasani water to clean the machine. It's kinda pricey at about $15 for 5 gallons.
Thanks !
@traincarriages
4 жыл бұрын
Hi if you are using pump every week do you put the pump armour in at the end of each day or just when you are storing pump
Tqvm , was using GX 21 for less than 100 litre painting , and I think my cleaning way is not right , and now the machine doesn't work after stop using due to covid 19 pandemic 😞
Just wondering, when putting the pump Armour through the pump, do you also run it through the hose and through the Gun?
@TheKorvbrodsbagarn
4 жыл бұрын
Alan McGrath he mention it at 7:56
@mikeparker5008
3 жыл бұрын
No.
How do you dispose of the dirty water?
@martiokrzesik5015
3 жыл бұрын
Um he pours it down the toilet or dumps it in a yard somewhere. Thanks to the epa the quality of paint is questionable, but you can damn near drink it.
Do I need pump armor every time? And what does it do
@shutupimgod8268
10 ай бұрын
I would say it depends on how long it goes between uses. I'm my shop we rarely use it because we use our sprayer daily.
Hi. What hapend if i forgot buy pump armor and i finish painting my job friday evening and can't get pump armor until monday? Can i fill pump with water and hold that for weekend?
@kirkdunn1379
3 жыл бұрын
I actually don't leave any water in unit at all...I disconnect the hose flush out water and squirt a few drops of oil thru pump.......water destroys everything and if it sits for any length of time its not good.....if your using it in next day or so fine but I leave my airless sprayer open and dry from now on.....
@lnc23
3 жыл бұрын
i wouldn't worry about it. not the first time i do it. I put anti freeze if gonna store for a long time.
Where do you dump the dirty water?
@the-chris-show
3 жыл бұрын
In your neighbors yard
Don’t u damage the pump , when you empty it, and fill it with air ( prior to pump armor ? ) i heard some people juste dilute pump armor into clean water , and store it as is . Just bought one And îm kinda scared to burn it ^^.
Now tell me how to clean out sandtex ultra smooth masonry paint because I've been here fucking ages doing it think I'm going to have to strip it. On your classic 290 model. Also this is my first time using a paint sprayer so any advice would be very appreciated
@bertybasset106
Жыл бұрын
I have 100 square meters to paint with masonry paint - bought an erbauer sprayer yesterday, first time using it and first time I tested it and I just thought "I hate this damn thing". Just with emulsion it took forever to get the water to run clean. The handle doesn't come off either, the nuts have been fastened so tight. Spanners, wrenches, buckets, hoses, water everywhere, I am ready for taking it outside and sledge hammering it to pieces!
Should have flushed and cleaned the filters on the pump and in the gun
Official instructions do not call on getting rid of the water before running 2 oz of pimp armor. I suspect it's not good to run the pump dry.
Does hot water work better?
@SprayDirect
4 жыл бұрын
Aaron Wilson personally I prefer to use warm to hot water as I believe it does help break down more stubborn residue but, also in the middle of winter on site, it’s a bit more friendlier on the hands, unfortunately hot water isn’t always available.
@noslrak2000
4 жыл бұрын
How about a little bit of washing up liquid (make sure you don't contaminate your paint with it). It breaks up paint residue very well.
@mikeparker5008
3 жыл бұрын
@@noslrak2000 I will flush the system, then I run some water & dishwashing liquid thru the pump...then another thorough rinse. This keeps my Graco good for a few weeks until I need it again. If I need to store it for longer, I use pump armor.
you forgot to flush the paint out of the hose first