Best settings and part one of this govee t2 best settings you can find here: kzread.info/dash/bejne/gGyIz618iZqZh7Q.htmlsi=zjORei9BoTmyMYiS

I completely missed this video. Thanks a lot for covering my question.

@MADpack

6 ай бұрын

Thank you youuuuu to give me one of the questions to make this video :)

Just so ya know, you can set it up to turn on and off with Alexa. Mine is attached to a 77-inch LG OLED, and while it has Alexa on it, I use a separate device. But you can set up a command for it all to turn in at once (example: "Alexa turn on the tv and tv lights), or automatically in the app. Hope that helps!

@MADpack

6 ай бұрын

Obviously you can do that with Alexa or google. I’m saying that is to turn off automatically if you turn off the tv so when the tv turn off the Govee will automatically know that needs to turn off that’s what I was saying but using a smart home platform will give that options and more

I have exactly those cheap Amazon strip light LEDs that cycle, its a solid "Good enough" haha. Good on you for following up brother, have a great day :)

@MADpack

8 ай бұрын

Thank you so much to always check every single video that I put out :) hope that life is well

What's worked best for me is to have add a basic LED strip as well as the T2 - leave the basic strip on as a white/neutral backlight at a comfortable level. The T2 is set bright and saturated enough to just show over the top of that backlight. This means I don't get the jarring annoyance and eye-strain of going from zero back-lighting to full blown just because of a brief scene change but more importantly, the overall effect of the T2 becomes vastly more subtle - it's blending rather than just lighting up the wall in various colours. (be better if Govee added an option to the software to set a min/max lighting level to get the same effect - but for now, a cheap strip-light does the job) Also - I found that the camera (especially on the left of my screen) misreads the screen - it seems to be collecting information from a good inch or two in from the position you've set when calibrating. I used a "test screen" found on youtube that shows vertical, coloured stripes and spotted that the wrong colour was showing to the left and right of the screen, even when the picture was frozen (you need stripes to see it, for obvious reasons). Setting the calibration points slightly wide of the screen works for me. I've no idea if this only applies to my T2 - test your own and adjust accordingly.

@MADpack

4 ай бұрын

Thank you for sharing your setup and your experience :)

I have a problem with the camera that cannot be connected. Please help

@MADpack

25 күн бұрын

Try to reset the camera system

I have a new sony 85" but don't know if I should get the T2 that is suppose to work with an 85" tv. Ppl say that they have dark gaps in the corners. Should I get the T2 that works with a 95" tv?

@MADpack

7 ай бұрын

I think you should wait for next weeks videos all related to your question because I will be comparing to my Govee T2 this new backlight tv

I just installed mine this evening and I noticed that the left side of my led light is much brighter than the right. What I’m gonna do?

@MADpack

8 ай бұрын

You have an option to adjust brightness in the 4 sides

Could i cut off the main power too the unit or do i need the adapter connected to keep the setup or settings

@MADpack

4 ай бұрын

I believe you can disconnect without a problem but if it lose the configuration is not that it takes a lot of time to set it up

Do you need leave the foam on the tv or can you revmove it? And can you reuse it? Cuz im also going to put my tv on the wall

@MADpack

6 ай бұрын

Yes you remove the foam after doing the calibration and yes you can reuse them just put the bit of paper recovering the glue for using next time

What setting are you using to get the colors to mimic the screen. In the liquid on the screen example you have the green liquid and green light on one side etc. Mine seems to just throw colors all around??

@MADpack

Ай бұрын

Have you follow my other settings video?

There was an update on the Govee T2 light system, what is the difference between vivid and smooth setting?

@MADpack

8 ай бұрын

I have swapped the govee T2 from my TV but I will never use a pre calibrated settings always a custom calibration because is always better vivid for sure is more saturated and been more noticble and the smooth one trying to blend more with the screen but I doubt that is a better setting than a custom

@jamesgomez8111

7 ай бұрын

Why did you swap out the T2 from your tv?

@MADpack

7 ай бұрын

Because I have someone that is even better :)

@truthseekerr22

5 ай бұрын

And that is???? 😂😂​@@MADpack

@MADpack

5 ай бұрын

@@truthseekerr22 Govee t3 lite and Nanoleaf 4D 100 times better

I have LG C1 OLED. Its ultra thin. I am not sure how to setup camera. I also cant adjust below led. I dont have space for it

@MADpack

3 ай бұрын

Even if it’s thin the camera is just balancing on the top so not a big deal

Wonder if ai sync box has better colors

@MADpack

2 ай бұрын

Lytmi Fantasy 3 Vs Govee T2 - The winner is... kzread.info/dash/bejne/aWVszqWKcrfSlaTd.htmlou have you answer and more here

@GadgetsGearCoffee

2 ай бұрын

@@MADpack but one of them isn't govee?

@MADpack

2 ай бұрын

No is not but the principal is the same

Does the Govee Tv Backlight T2 work on a 48'' TV?

@MADpack

7 ай бұрын

Yes you have different sizes for the Govee t2 like mine works on tvs of 55 and 65 inches

@NETOTRT

7 ай бұрын

@@MADpack thanks but mine is smaller, maybe I have to route the strip in a different way? Because I will have excess probably no?

@MADpack

7 ай бұрын

@andremarques610 is not ideal and the issue with that is that you are stuck with the strip size if you choose the size of it have you consider the Nanoleaf 4D? Check my review you will be impressed in my opinion: kzread.info/dash/bejne/nZaVyM6dYdLSf6w.htmlsi=kMLSNo4HeKIRoUwE

I dont understand why in movie mode the colours are not that bright. If i go with any other mode then the led's flash so bright. I have made the brightness and relative brightness to 100% still its too dull. No idea why its happening

@MADpack

4 ай бұрын

Do you sacrifice accuracy to brightness because is impossible to have a good result with brightness at 100%

Super vidéo Pour quand réglages sur T3 lite l’amigo

@MADpack

7 ай бұрын

Thank you so much I really don’t know depends on Govee really if they want to sent me.

I find on my tv it’s coming more blue light on white backgrounds

@MADpack

5 ай бұрын

Have you set it up with my own settings?

@jasoncarvalho9483

5 ай бұрын

@@MADpack yeah, I’ve tried those from your other videos.. still shows up blue instead of white during white backgrounds on playstation

@MADpack

5 ай бұрын

@jasoncarvalho9483 so pull the saturation a bit less towards the blue and a bit more towards the reds hope it helps

My colours are oposite

@MADpack

7 ай бұрын

How your colours are opposite?

My colors are not accurate

@MADpack

7 ай бұрын

Have you follow my tutorial? Is normal that are not for a reason this video have not than 50.000 views a lot of people have the sane issue with the govee t2 you are not alone

You can turn on/off automatically govee with tv by google home assistant

@MADpack

7 ай бұрын

Without automations no and not everyone have one